diff options
Diffstat (limited to 'board/adlrvpp_mchp1521/board.h')
| -rw-r--r-- | board/adlrvpp_mchp1521/board.h | 150 |
1 files changed, 0 insertions, 150 deletions
diff --git a/board/adlrvpp_mchp1521/board.h b/board/adlrvpp_mchp1521/board.h deleted file mode 100644 index 1d3cb4828f..0000000000 --- a/board/adlrvpp_mchp1521/board.h +++ /dev/null @@ -1,150 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel ADLRVP-P-DDR4-MEC1521 board-specific configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* Microchip EC variant */ -#define VARIANT_INTELRVP_EC_MCHP - -/* UART for EC console */ -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 2 - -#include "adlrvp.h" - -/* - * Macros for GPIO signals used in common code that don't match the - * schematic names. Signal names in gpio.inc match the schematic and are - * then redefined here to so it's more clear which signal is being used for - * which purpose. - */ -/* Power sequencing */ -#define GPIO_EC_SPI_OE_N GPIO_EC_PCH_SPI_OE_N -#define GPIO_PG_EC_ALL_SYS_PWRGD GPIO_ALL_SYS_PWRGD -#define GPIO_RSMRST_L_PGOOD GPIO_RSMRST_PWRGD_EC_N -#define GPIO_PG_EC_RSMRST_ODL GPIO_RSMRST_PWRGD_EC_N -#define GPIO_PCH_SLP_S0_L GPIO_PM_SLP_S0_R_N -#define GPIO_PG_EC_DSW_PWROK GPIO_EC_TRACE_DATA_2 -#define GPIO_VCCST_PWRGD GPIO_EC_TRACE_DATA_3 -#define GPIO_SLP_SUS_L GPIO_PM_SLP_SUS_N -#define GPIO_SYS_RESET_L GPIO_DG2_PRESENT -#define GPIO_PCH_RSMRST_L GPIO_PM_RSMRST_R -#define GPIO_PCH_PWRBTN_L GPIO_PM_PWRBTN_N_R -#define GPIO_EN_PP3300_A GPIO_EC_DS3_R -#define GPIO_SYS_PWROK_EC GPIO_SYS_PWROK_EC_R -#define GPIO_PCH_DSW_PWROK GPIO_EC_TRACE_DATA_1 - -/* Buttons */ -#define GPIO_LID_OPEN GPIO_SMC_LID -#define GPIO_VOLUME_UP_L GPIO_VOL_UP_EC -#define GPIO_VOLUME_DOWN_L GPIO_VOL_DOWN_EC -#define GPIO_POWER_BUTTON_L GPIO_PWRBTN_EC_IN_N - -/* Sensors */ -#define GMR_TABLET_MODE_GPIO_L GPIO_EC_SLATEMODE_HALLOUT_SNSR_R -#define GPIO_CPU_PROCHOT GPIO_PROCHOT_EC_R - -/* AC & Battery */ -#define GPIO_DC_JACK_PRESENT GPIO_STD_ADP_PRSNT_EC -#define GPIO_AC_PRESENT GPIO_BC_ACOK_EC_IN -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_BATT_ID_R - -/* eSPI/Host communication */ -#define GPIO_ESPI_RESET_L GPIO_ESPI_RST_EC_R_N -#define GPIO_PCH_WAKE_L GPIO_SMC_WAKE_SCI_N -#define GPIO_EC_INT_L GPIO_EC_TRACE_DATA_0 - -/* H1 */ -#define GPIO_WP_L GPIO_EC_WAKE_CLK_R -#define GPIO_PACKET_MODE_EN GPIO_EC_TRACE_CLK -#define GPIO_ENTERING_RW GPIO_DNX_FORCE_RELOAD_EC_R - -/* FAN */ -#define GPIO_FAN_POWER_EN GPIO_FAN_PWR_DISABLE - -/* LEDs */ -#define GPIO_BAT_LED_RED_L GPIO_PM_BAT_STATUS_LED2 -#define GPIO_PWR_LED_WHITE_L GPIO_PM_PWRBTN_LED - -/* Uart */ -#define GPIO_UART2_RX GPIO_EC_UART_RX - -/* Case Closed Debug Mode interrupt */ -#define GPIO_CCD_MODE_ODL GPIO_KBC_NUMLOCK - -/* USB-C interrupts */ -#define GPIO_USBC_TCPC_ALRT_P0 GPIO_TYPEC_EC_SMBUS_ALERT_0_R -#define GPIO_USBC_TCPC_ALRT_P1 GPIO_TYPEC_EC_SMBUS_ALERT_1_R -#define GPIO_USBC_TCPC_PPC_ALRT_P0 GPIO_KBC_SCANOUT_15 -#define GPIO_USBC_TCPC_PPC_ALRT_P1 GPIO_KBC_CAPSLOCK - - -/* I2C ports & Configs */ -/* Charger */ -#define I2C_PORT_CHARGER MCHP_I2C_PORT0 -/* Port 80 */ -#define I2C_PORT_PORT80 MCHP_I2C_PORT0 -/* Board ID */ -#define I2C_PORT_PCA9555_BOARD_ID_GPIO MCHP_I2C_PORT0 -/* Battery */ -#define I2C_PORT_BATTERY MCHP_I2C_PORT0 -/* USB-C I2C */ -#define I2C_PORT_TYPEC_0 MCHP_I2C_PORT1 -#define I2C_PORT_TYPEC_1 MCHP_I2C_PORT5 - -/* - * MEC1521H loads firmware using QMSPI controller - * CONFIG_SPI_FLASH_PORT is the index into - * spi_devices[] in board.c - */ -#define CONFIG_SPI_FLASH_PORT 0 -#define CONFIG_SPI_FLASH - -/* - * ADLRVP uses 32MB SPI flash- W25R256JVEIQ.But, EC binary to be generated - * is of size 512KB. This bin is then later appended with 0xFF to become 32MB - * binary for flashing purpose. - */ -#define CONFIG_FLASH_SIZE_BYTES (512 * 1024) -#define CONFIG_SPI_FLASH_W25X40 /* TODO: change to W25R256 */ - -/* ADC channels */ -/* - * Undefining below and redefining based on ADL RVP schematics, - * as they are already defined with different channels in mchp_ec.h. - */ -#undef ADC_TEMP_SNS_AMBIENT_CHANNEL -#undef ADC_TEMP_SNS_VR_CHANNEL -#undef ADC_TEMP_SNS_DDR_CHANNEL -#undef ADC_TEMP_SNS_SKIN_CHANNEL - -#define ADC_TEMP_SNS_AMBIENT_CHANNEL CHIP_ADC_CH4 -#define ADC_TEMP_SNS_VR_CHANNEL CHIP_ADC_CH5 -#define ADC_TEMP_SNS_DDR_CHANNEL CHIP_ADC_CH6 -#define ADC_TEMP_SNS_SKIN_CHANNEL CHIP_ADC_CH7 - -/* To do: Remove once fan register details are added in mchp/fan.c */ -#undef CONFIG_FANS - -/* Use internal silicon 32KHz oscillator */ -#undef CONFIG_CLOCK_SRC_EXTERNAL - -#ifndef __ASSEMBLER__ - -enum adlrvp_i2c_channel { - I2C_CHAN_BATT_CHG, - I2C_CHAN_TCPC_0, - I2C_CHAN_TCPC_1, - I2C_CHAN_COUNT, -}; - -/* Map I2C port to controller */ -int board_i2c_p2c(int port); -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |