diff options
Diffstat (limited to 'board/adlrvpp_npcx/gpio.inc')
| -rw-r--r-- | board/adlrvpp_npcx/gpio.inc | 176 |
1 files changed, 0 insertions, 176 deletions
diff --git a/board/adlrvpp_npcx/gpio.inc b/board/adlrvpp_npcx/gpio.inc deleted file mode 100644 index a059b1c6b6..0000000000 --- a/board/adlrvpp_npcx/gpio.inc +++ /dev/null @@ -1,176 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel ADL-P-RVP-NPCX board-specific configuration */ - -#include "baseboard/intelrvp/adlrvp_ioex_gpio.inc" - -/* Power sequencing interrupts */ -GPIO_INT(ALL_SYS_PWRGD, PIN(7, 0), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(RSMRST_PWRGD, PIN(3, 7), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(PCH_SLP_S0_N, PIN(A, 1), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(VCCPDSW_3P3, PIN(4, 5), GPIO_INT_BOTH, power_signal_interrupt) -/* TODO: GPIO_INT(VCCST_PWRGD_MECC, PIN(7, 1), GPIO_INT_BOTH, power_signal_interrupt) */ -GPIO_INT(PM_SLP_SUS_EC_N, PIN(8, 6), GPIO_INT_BOTH, power_signal_interrupt) -#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -GPIO_INT(PM_SLP_S3_N, PIN(B, 0), GPIO_INT_BOTH, power_signal_interrupt) -#else -GPIO(PM_SLP_S3_N, PIN(B, 0), GPIO_INPUT) -#endif -#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S4 -GPIO_INT(PM_SLP_S4_N, PIN(A, 5), GPIO_INT_BOTH, power_signal_interrupt) -#else -GPIO(PM_SLP_S4_N, PIN(A, 5), GPIO_INPUT) -#endif - -/* Button interrupts */ -GPIO_INT(VOLUME_UP, PIN(6, 1), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(VOL_DN_EC, PIN(0, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(SMC_LID, PIN(0, 1), GPIO_INT_BOTH | GPIO_PULL_UP, lid_interrupt) -GPIO_INT(MECH_PWR_BTN_ODL, PIN(0, 0), GPIO_INT_BOTH, power_button_interrupt) - -/* DC Jack presence coming from +VADP_OUT */ -GPIO_INT(STD_ADP_PRSNT, PIN(0, 2), GPIO_INT_BOTH, board_dc_jack_interrupt) /* DC_JACK_PRESENT */ - -GPIO_INT(BC_ACOK, PIN(C, 6), GPIO_INT_BOTH, extpower_interrupt) /* AC Present */ - -/* USB-C interrupts */ -GPIO_INT(USBC_TCPC_ALRT_P0, PIN(4, 0), GPIO_INT_BOTH, tcpc_alert_event) -GPIO_INT(USBC_TCPC_ALRT_P1, PIN(6, 2), GPIO_INT_BOTH, tcpc_alert_event) -#if defined(HAS_TASK_PD_C2) -GPIO_INT(USBC_TCPC_ALRT_P2, PIN(6, 3), GPIO_INT_BOTH, tcpc_alert_event) -GPIO_INT(USBC_TCPC_ALRT_P3, PIN(6, 7), GPIO_INT_BOTH, tcpc_alert_event) -#else -GPIO(USBC_TCPC_ALRT_P2, PIN(6, 3), GPIO_INPUT) -GPIO(USBC_TCPC_ALRT_P3, PIN(6, 7), GPIO_INPUT) -#endif - -GPIO_INT(USBC_TCPC_PPC_ALRT_P0, PIN(F, 0), GPIO_INT_BOTH, ppc_interrupt) -GPIO_INT(USBC_TCPC_PPC_ALRT_P1, PIN(F, 1), GPIO_INT_BOTH, ppc_interrupt) -#if defined(HAS_TASK_PD_C2) -GPIO_INT(USBC_TCPC_PPC_ALRT_P2, PIN(F, 2), GPIO_INT_BOTH, ppc_interrupt) -GPIO_INT(USBC_TCPC_PPC_ALRT_P3, PIN(F, 3), GPIO_INT_BOTH, ppc_interrupt) -#else -GPIO(USBC_TCPC_PPC_ALRT_P2, PIN(F, 2), GPIO_INPUT) -GPIO(USBC_TCPC_PPC_ALRT_P3, PIN(F, 3), GPIO_INPUT) -#endif - -/* Host communication GPIOs */ -GPIO(SMC_WAKE_SCI_N_MECC, PIN(A, 4), GPIO_ODR_HIGH) -GPIO(EC_PCH_MKBP_INT_ODL, PIN(F, 5), GPIO_ODR_HIGH) -#ifndef CONFIG_HOSTCMD_ESPI -GPIO(LPC_ESPI_RST_N, PIN(5, 4), GPIO_INPUT | GPIO_SEL_1P8V) -GPIO(PLT_RST_L, PIN(A, 2), GPIO_INPUT | GPIO_SEL_1P8V) /* PCH_PLTRST_L */ -#endif - -/* Sensor Interrupts */ -GPIO_INT(SLATE_MODE_INDICATION, PIN(E, 5), GPIO_INT_BOTH | GPIO_SEL_1P8V, gmr_tablet_switch_isr) -GPIO(PROCHOT_EC_N, PIN(A, 7), GPIO_INPUT) - -/* Power sequencing GPIOs */ -GPIO(SYS_RST_ODL, PIN(C, 5), GPIO_ODR_HIGH) -/* GPIOD3 (Rework: CPU_TACHO_FAN is swapped with PM_RSMRST_N) */ -GPIO(PM_RSMRST_N, PIN(D, 3), GPIO_OUT_LOW) -GPIO(PM_PWRBTN_N, PIN(9, 7), GPIO_ODR_HIGH) -GPIO(EC_SPI_OE_MECC, PIN(6, 0), GPIO_OUT_LOW) -GPIO(EC_DS3, PIN(C, 4), GPIO_OUT_LOW) -UNIMPLEMENTED(EN_PP5000) - -/* PCH_PWROK_EC is an input, as it's driven by the Silego chip on RVP */ -GPIO(PCH_PWROK_EC, PIN(A, 0), GPIO_INPUT) -GPIO(SYS_PWROK, PIN(9, 3), GPIO_OUT_LOW) -GPIO(EC_DSW_PWROK, PIN(9, 5), GPIO_OUT_LOW) - -/* H1 pins */ -GPIO_INT(EC_FLASH_WP_ODL, PIN(9, 4), GPIO_INT_BOTH, switch_interrupt) -GPIO(EC_H1_PACKET_MODE, PIN(E, 2), GPIO_OUT_LOW) -GPIO(EC_ENTERING_RW, PIN(D, 4), GPIO_OUT_LOW) - -/* Case Closed Debug Mode */ -GPIO_INT(CCD_MODE_ODL, PIN(F, 4), GPIO_INT_BOTH, board_connect_c0_sbu) - -/* Battery present */ -GPIO(BAT_DET, PIN(7, 6), GPIO_INPUT) - -/* EDP */ -GPIO(EDP_BKLT_EN_MECC, PIN(E, 1), GPIO_OUT_HIGH) - -/* LED */ -GPIO(LED_1_L, PIN(B, 6), GPIO_OUT_HIGH) -GPIO(LED_2_L, PIN(B, 7), GPIO_OUT_HIGH) - -/* FAN control pins */ -GPIO(THERM_SEN_MECC, PIN(C, 0), GPIO_OUT_LOW) - -/* - * I2C pins should be configure as inputs until I2C module is - * initialized. This will avoid driving the lines unintentionally. - */ -GPIO(SMB_BS_CLK, PIN(B, 3), GPIO_INPUT) /* I2C7_SCL0 */ -GPIO(SMB_BS_DATA, PIN(B, 2), GPIO_INPUT) /* I2C7_SDA0 */ -GPIO(USBC_TCPC_I2C_CLK_P0, PIN(B, 5), GPIO_INPUT) /* I2C0_SCL0 */ -GPIO(USBC_TCPC_I2C_DATA_P0, PIN(B, 4), GPIO_INPUT) /* I2C0_SDA0 */ -GPIO(USBC_TCPC_I2C_CLK_P2, PIN(9, 2), GPIO_INPUT) /* I2C2_SCL0 */ -GPIO(USBC_TCPC_I2C_DATA_P2, PIN(9, 1), GPIO_INPUT) /* I2C2_SDA0 */ -GPIO(USBC_TCPC_I2C_CLK_P1, PIN(9, 0), GPIO_INPUT) /* I2C1_SCL0 */ -GPIO(USBC_TCPC_I2C_DATA_P1, PIN(8, 7), GPIO_INPUT) /* I2C1_SCL0 */ -GPIO(USBC_TCPC_I2C_CLK_P3, PIN(D, 1), GPIO_INPUT) /* I2C3_SCL0 */ -GPIO(USBC_TCPC_I2C_DATA_P3, PIN(D, 0), GPIO_INPUT) /* I2C3_SCL0 */ - -/* Unused pins */ -GPIO(SML1_CLK_MECC, PIN(3, 3), GPIO_INPUT) -GPIO(SML1_DATA_MECC, PIN(3, 6), GPIO_INPUT) -GPIO(SMB_PCH_CLK, PIN(C, 2), GPIO_INPUT) -GPIO(SMB_PCH_DATA, PIN(C, 1), GPIO_INPUT) -GPIO(I3C_0_SCL, PIN(E, 4), GPIO_INPUT) -GPIO(I3C_0_SDA, PIN(E, 3), GPIO_INPUT) -GPIO(CPU_CAT_ERR_MECC, PIN(3, 4), GPIO_INPUT) -GPIO(TP29, PIN(5, 0), GPIO_INPUT) -GPIO(TP28, PIN(5, 6), GPIO_INPUT) -GPIO(ESPI_ALERT0_N, PIN(5, 7), GPIO_INPUT | GPIO_SEL_1P8V) -GPIO(BATT_DISABLE_EC, PIN(6, 6), GPIO_INPUT) -GPIO(TP33, PIN(7, 2), GPIO_INPUT) -GPIO(TP26, PIN(7, 3), GPIO_INPUT) -GPIO(SLP_S0_CS_N, PIN(7, 4), GPIO_INPUT) -GPIO(EC_PECI, PIN(8, 1), GPIO_INPUT) -GPIO(CPU_C10_GATE_MECC, PIN(9, 6), GPIO_INPUT) -GPIO(SMB_PCH_ALRT, PIN(A, 3), GPIO_INPUT) -GPIO(SMC_SDOWN_MECC, PIN(B, 1), GPIO_INPUT) -GPIO(STD_ADPT_CNTRL_GPIO, PIN(C, 3), GPIO_INPUT) -GPIO(SML1_ALERT, PIN(C, 7), GPIO_INPUT) -GPIO(SMC_ONOFF_N, PIN(D, 2), GPIO_INPUT) /* Power button interrupt without H1 */ -GPIO(SUSWARN, PIN(D, 5), GPIO_INPUT) -GPIO(TP_GPIOD6_EC, PIN(D, 6), GPIO_INPUT) -GPIO(TP_GPIOD7_EC, PIN(D, 7), GPIO_INPUT) -GPIO(ME_G3_TO_M3_EC, PIN(E, 0), GPIO_INPUT) - -/* Alternate pins for I2C */ -ALTERNATE(PIN_MASK(8, BIT(7)), GPIO_ALT_FUNC_DEFAULT, MODULE_I2C, GPIO_FLAG_NONE) -ALTERNATE(PIN_MASK(9, BIT(0) | BIT(1) | BIT(2)), GPIO_ALT_FUNC_DEFAULT, MODULE_I2C, GPIO_FLAG_NONE) -ALTERNATE(PIN_MASK(B, BIT(2) | BIT(3) | BIT(4) | BIT(5)), GPIO_ALT_FUNC_DEFAULT, MODULE_I2C, GPIO_FLAG_NONE) -ALTERNATE(PIN_MASK(D, BIT(0) | BIT(1)), GPIO_ALT_FUNC_DEFAULT, MODULE_I2C, GPIO_FLAG_NONE) - -/* Alternate pins for UART */ -ALTERNATE(PIN_MASK(6, BIT(4) | BIT(5)), GPIO_ALT_FUNC_DEFAULT, MODULE_UART, GPIO_PULL_UP) - -/* Alternate pins for ADC */ -/* VR_TMP/V_1P05 - GPIO44, SKIN_THERM_IN_EC - GPIO43, AMBIENT_TEMP - GPIO42, DDR_TEMP/EC_5V - GPIO41 */ -ALTERNATE(PIN_MASK(4, BIT(1) | BIT(2) | BIT(3) | BIT(4)), GPIO_ALT_FUNC_DEFAULT, MODULE_ADC, GPIO_FLAG_NONE) - -/* Alternate pins for FAN */ -ALTERNATE(PIN_MASK(8, BIT(0)), GPIO_ALT_FUNC_DEFAULT, MODULE_PWM, GPIO_FLAG_NONE) /* CPU_FAN_MECC GPIO80/PWM3_LED3 */ -/* GPIOA6 (Rework: CPU_TACHO_FAN is swapped with PM_RSMRST_N) */ -ALTERNATE(PIN_MASK(A, BIT(6)), GPIO_ALT_FUNC_DEFAULT, MODULE_PWM, GPIO_FLAG_NONE) - -/* Keyboard pins */ -ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) /* KSI_00-01 */ -GPIO(EC_KSO_02_INV, PIN(1, 7), GPIO_OUT_LOW) -ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) /* KSI_02-07 */ -ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_00-01 */ -ALTERNATE(PIN_MASK(1, 0xFF), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_02-09 */ -ALTERNATE(PIN_MASK(0, 0xF0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_10-13 */ -ALTERNATE(PIN_MASK(8, 0x0C), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_14-15 */ |