summaryrefslogtreecommitdiff
path: root/board/akemi/board.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/akemi/board.c')
-rw-r--r--board/akemi/board.c107
1 files changed, 53 insertions, 54 deletions
diff --git a/board/akemi/board.c b/board/akemi/board.c
index de5438344e..7d480b1268 100644
--- a/board/akemi/board.c
+++ b/board/akemi/board.c
@@ -1,4 +1,4 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
+/* Copyright 2019 The ChromiumOS Authors
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
@@ -43,8 +43,8 @@
#include "util.h"
#include "battery_smart.h"
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
+#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ##args)
+#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ##args)
/* GPIO to enable/disable the USB Type-A port. */
const int usb_port_enable[CONFIG_USB_PORT_POWER_SMART_PORT_COUNT] = {
@@ -105,16 +105,16 @@ static void bc12_interrupt(enum gpio_signal signal)
/******************************************************************************/
/* SPI devices */
-const struct spi_device_t spi_devices[] = {
-};
+const struct spi_device_t spi_devices[] = {};
const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices);
/******************************************************************************/
/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
const struct pwm_t pwm_channels[] = {
- [PWM_CH_KBLIGHT] = { .channel = 3, .flags = 0, .freq = 10000 },
- [PWM_CH_FAN] = {.channel = 5, .flags = PWM_CONFIG_OPEN_DRAIN,
- .freq = 25000},
+ [PWM_CH_KBLIGHT] = { .channel = 3, .flags = 0, .freq = 10000 },
+ [PWM_CH_FAN] = { .channel = 5,
+ .flags = PWM_CONFIG_OPEN_DRAIN,
+ .freq = 25000 },
};
BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
@@ -140,16 +140,20 @@ const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
},
};
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
+const struct usb_mux_chain usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
[USB_PD_PORT_TCPC_0] = {
- .usb_port = USB_PD_PORT_TCPC_0,
- .driver = &anx7447_usb_mux_driver,
- .hpd_update = &anx7447_tcpc_update_hpd_status,
+ .mux = &(const struct usb_mux) {
+ .usb_port = USB_PD_PORT_TCPC_0,
+ .driver = &anx7447_usb_mux_driver,
+ .hpd_update = &anx7447_tcpc_update_hpd_status,
+ },
},
[USB_PD_PORT_TCPC_1] = {
- .usb_port = USB_PD_PORT_TCPC_1,
- .driver = &tcpci_tcpm_usb_mux_driver,
- .hpd_update = &ps8xxx_tcpc_update_hpd_status,
+ .mux = &(const struct usb_mux) {
+ .usb_port = USB_PD_PORT_TCPC_1,
+ .driver = &tcpci_tcpm_usb_mux_driver,
+ .hpd_update = &ps8xxx_tcpc_update_hpd_status,
+ },
}
};
@@ -177,17 +181,13 @@ static struct stprivate_data g_lis2dwl_data;
static struct lsm6dsm_data lsm6dsm_data = LSM6DSM_DATA;
/* Matrix to rotate accelrator into standard reference frame */
-static const mat33_fp_t base_standard_ref = {
- { FLOAT_TO_FP(-1), 0, 0},
- { 0, FLOAT_TO_FP(1), 0},
- { 0, 0, FLOAT_TO_FP(-1)}
-};
+static const mat33_fp_t base_standard_ref = { { FLOAT_TO_FP(-1), 0, 0 },
+ { 0, FLOAT_TO_FP(1), 0 },
+ { 0, 0, FLOAT_TO_FP(-1) } };
-static const mat33_fp_t lid_standard_ref = {
- { 0, FLOAT_TO_FP(-1), 0},
- { FLOAT_TO_FP(-1), 0, 0},
- { 0, 0, FLOAT_TO_FP(-1)}
-};
+static const mat33_fp_t lid_standard_ref = { { 0, FLOAT_TO_FP(-1), 0 },
+ { FLOAT_TO_FP(-1), 0, 0 },
+ { 0, 0, FLOAT_TO_FP(-1) } };
struct motion_sensor_t motion_sensors[] = {
[LID_ACCEL] = {
@@ -267,13 +267,12 @@ struct motion_sensor_t motion_sensors[] = {
};
unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
/******************************************************************************/
/* Physical fans. These are logically separate from pwm_channels. */
const struct fan_conf fan_conf_0 = {
.flags = FAN_USE_RPM_MODE,
- .ch = MFT_CH_0, /* Use MFT id to control fan */
+ .ch = MFT_CH_0, /* Use MFT id to control fan */
.pgood_gpio = -1,
.enable_gpio = GPIO_EN_PP5000_FAN,
};
@@ -292,36 +291,35 @@ const struct fan_t fans[FAN_CH_COUNT] = {
/******************************************************************************/
/* MFT channels. These are logically separate from pwm_channels. */
const struct mft_t mft_channels[] = {
- [MFT_CH_0] = {NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN},
+ [MFT_CH_0] = { NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN },
};
BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT);
/* ADC channels */
const struct adc_t adc_channels[] = {
- [ADC_TEMP_SENSOR_1] = {
- "TEMP_AMB", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
- [ADC_TEMP_SENSOR_2] = {
- "TEMP_CHARGER", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
+ [ADC_TEMP_SENSOR_1] = { "TEMP_AMB", NPCX_ADC_CH0, ADC_MAX_VOLT,
+ ADC_READ_MAX + 1, 0 },
+ [ADC_TEMP_SENSOR_2] = { "TEMP_CHARGER", NPCX_ADC_CH1, ADC_MAX_VOLT,
+ ADC_READ_MAX + 1, 0 },
};
BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
const struct temp_sensor_t temp_sensors[] = {
- [TEMP_SENSOR_1] = {.name = "Temp1",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = get_temp_3v3_51k1_47k_4050b,
- .idx = ADC_TEMP_SENSOR_1},
- [TEMP_SENSOR_2] = {.name = "Temp2",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = get_temp_3v3_51k1_47k_4050b,
- .idx = ADC_TEMP_SENSOR_2},
- [TEMP_SENSOR_3] = {.name = "Temp3",
- .type = TEMP_SENSOR_TYPE_CPU,
- .read = g753_get_val,
- .idx = 0},
+ [TEMP_SENSOR_1] = { .name = "Temp1",
+ .type = TEMP_SENSOR_TYPE_BOARD,
+ .read = get_temp_3v3_51k1_47k_4050b,
+ .idx = ADC_TEMP_SENSOR_1 },
+ [TEMP_SENSOR_2] = { .name = "Temp2",
+ .type = TEMP_SENSOR_TYPE_BOARD,
+ .read = get_temp_3v3_51k1_47k_4050b,
+ .idx = ADC_TEMP_SENSOR_2 },
+ [TEMP_SENSOR_3] = { .name = "Temp3",
+ .type = TEMP_SENSOR_TYPE_CPU,
+ .read = g753_get_val,
+ .idx = 0 },
};
BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
/* Hatch Temperature sensors */
/*
* TODO(b/124316213): These setting need to be reviewed and set appropriately
@@ -331,8 +329,8 @@ BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
/*
* TODO(b/202062363): Remove when clang is fixed.
*/
-#define THERMAL_A \
- { \
+#define THERMAL_A \
+ { \
.temp_host = { \
[EC_TEMP_THRESH_WARN] = 0, \
[EC_TEMP_THRESH_HIGH] = C_TO_K(75), \
@@ -391,12 +389,12 @@ __override uint32_t board_override_feature_flags0(uint32_t flags0)
}
/* Battery functions */
-#define SB_OPTIONALMFG_FUNCTION2 0x26
-#define QUICK_CHARGE_SUPPORT 0x01
-#define QUICK_CHARGE_ENABLE 0x02
+#define SB_OPTIONALMFG_FUNCTION2 0x26
+#define QUICK_CHARGE_SUPPORT 0x01
+#define QUICK_CHARGE_ENABLE 0x02
-#define SB_QUICK_CHARGE_ENABLE 1
-#define SB_QUICK_CHARGE_DISABLE 0
+#define SB_QUICK_CHARGE_ENABLE 1
+#define SB_QUICK_CHARGE_DISABLE 0
static void sb_quick_charge_mode(int enable)
{
@@ -422,7 +420,8 @@ static void board_chipset_startup(void)
/* Normal charge current */
sb_quick_charge_mode(SB_QUICK_CHARGE_DISABLE);
}
-DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_chipset_startup, HOOK_PRIO_INIT_I2C+1);
+DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_chipset_startup,
+ HOOK_PRIO_INIT_I2C + 1);
/* Called on AP S0 -> S5 transition */
static void board_chipset_shutdown(void)
@@ -437,5 +436,5 @@ bool board_is_convertible(void)
const uint8_t sku = get_board_sku();
return (sku == 255) || (sku == 1) || (sku == 2) || (sku == 3) ||
- (sku == 4);
+ (sku == 4);
}
View Lorry Controller Status