1 files changed, 0 insertions, 142 deletions
diff --git a/board/asurada/board.h b/board/asurada/board.h
deleted file mode 100644
index d8ee03c9f4..0000000000
--- a/board/asurada/board.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-/* Asurada board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-#include "baseboard.h"
-
-/* Chipset config */
-
-/* Optional features */
-#define CONFIG_LTO
-
-/*
- * TODO: Remove this option once the VBAT no longer keeps high when
- * system's power isn't presented.
- */
-#define CONFIG_IT83XX_RESET_PD_CONTRACT_IN_BRAM
-
-/* BC12 */
-/* TODO(b/159583342): remove after rev0 deprecated */
-#define CONFIG_MT6360_BC12_GPIO
-
-/* LED */
-#ifdef BOARD_HAYATO
-#define CONFIG_LED_ONOFF_STATES
-#define CONFIG_LED_ONOFF_STATES_BAT_LOW 10
-#endif
-
-/* PD / USB-C / PPC */
-#define CONFIG_USB_PD_DEBUG_LEVEL 3
-#define PD_MAX_CURRENT_MA 3000
-#define PD_OPERATING_POWER_MW 15000
-#ifdef BOARD_HAYATO
-#define PD_MAX_VOLTAGE_MV 15000
-#define PD_MAX_POWER_MW 45000
-#else
-#define PD_MAX_VOLTAGE_MV 20000
-#define PD_MAX_POWER_MW 60000
-#endif
-#define PD_POWER_SUPPLY_TURN_ON_DELAY  30000  /* us */
-#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */
-
-/* Optional console commands */
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_SCRATCHPAD
-#define CONFIG_CMD_STACKOVERFLOW
-
-#define CONFIG_BATT_FULL_CHIPSET_OFF_INPUT_LIMIT_MV	9000
-
-/* Sensor */
-#define CONFIG_GMR_TABLET_MODE
-#define CONFIG_TABLET_MODE
-#define CONFIG_TABLET_MODE_SWITCH
-#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L
-
-#define CONFIG_ACCELGYRO_BMI160 /* Base accel */
-#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define CONFIG_ACCELGYRO_ICM426XX /* Base accel */
-#define CONFIG_ACCELGYRO_ICM426XX_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-
-#define CONFIG_ACCEL_LIS2DWL
-#define CONFIG_ACCEL_LIS2DW_AS_BASE
-#define CONFIG_ACCEL_LIS2DW12_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(LID_ACCEL)
-
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-#define CONFIG_LID_ANGLE_UPDATE
-
-#ifdef BOARD_ASURADA_REV0
-#define CONFIG_ALS
-#define ALS_COUNT 1
-#define CONFIG_ALS_TCS3400
-#define CONFIG_ALS_TCS3400_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(CLEAR_ALS)
-#define CONFIG_ALS_TCS3400_EMULATED_IRQ_EVENT
-
-#define CONFIG_ACCEL_FORCE_MODE_MASK (BIT(LID_ACCEL) | BIT(CLEAR_ALS))
-#else
-/* TODO(b/171931139): remove this after rev1 board deprecated */
-#define CONFIG_ACCEL_FORCE_MODE_MASK (board_accel_force_mode_mask())
-#endif
-
-/* SPI / Host Command */
-#undef CONFIG_HOSTCMD_DEBUG_MODE
-#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF
-
-/* USB-A */
-#define USBA_PORT_COUNT 1
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-enum battery_type {
-	BATTERY_C235,
-	BATTERY_TYPE_COUNT,
-};
-
-enum sensor_id {
-	BASE_ACCEL = 0,
-	BASE_GYRO,
-	LID_ACCEL,
-#ifdef BOARD_ASURADA_REV0
-	CLEAR_ALS,
-	RGB_ALS,
-#endif
-	SENSOR_COUNT,
-};
-
-enum adc_channel {
-	ADC_VBUS_C0,             /* ADC 0 */
-	ADC_BOARD_ID_0,          /* ADC 1 */
-	ADC_BOARD_ID_1,          /* ADC 2 */
-	ADC_CHARGER_AMON_R,      /* ADC 3 */
-	ADC_VBUS_C1,             /* ADC 5 */
-	ADC_CHARGER_PMON,        /* ADC 6 */
-
-	/* Number of ADC channels */
-	ADC_CH_COUNT,
-};
-
-enum pwm_channel {
-	PWM_CH_LED1,
-	PWM_CH_LED2,
-	PWM_CH_LED3,
-	PWM_CH_COUNT,
-};
-
-int board_accel_force_mode_mask(void);
-void motion_interrupt(enum gpio_signal signal);
-
-#endif /* !__ASSEMBLER__ */
-#endif /* __CROS_EC_BOARD_H */