diff options
Diffstat (limited to 'board/asurada')
| -rw-r--r-- | board/asurada/battery.c | 47 | ||||
| -rw-r--r-- | board/asurada/board.c | 420 | ||||
| -rw-r--r-- | board/asurada/board.h | 142 | ||||
| -rw-r--r-- | board/asurada/build.mk | 17 | ||||
| -rw-r--r-- | board/asurada/ec.tasklist | 22 | ||||
| -rw-r--r-- | board/asurada/gpio.inc | 170 | ||||
| -rw-r--r-- | board/asurada/led.c | 205 | ||||
| -rw-r--r-- | board/asurada/led_hayato.c | 120 | ||||
| -rw-r--r-- | board/asurada/usbc_config.c | 28 | ||||
| -rw-r--r-- | board/asurada/vif_override.xml | 3 |
10 files changed, 0 insertions, 1174 deletions
diff --git a/board/asurada/battery.c b/board/asurada/battery.c deleted file mode 100644 index 6237a5058c..0000000000 --- a/board/asurada/battery.c +++ /dev/null @@ -1,47 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "battery.h" -#include "battery_fuel_gauge.h" -#include "battery_smart.h" -#include "charge_manager.h" -#include "chipset.h" -#include "gpio.h" -#include "hooks.h" -#include "system.h" -#include "usb_pd.h" - -const struct board_batt_params board_battery_info[] = { - [BATTERY_C235] = { - .fuel_gauge = { - .manuf_name = "AS3GWRc3KA", - .device_name = "C235-41", - .ship_mode = { - .reg_addr = 0x0, - .reg_data = { 0x10, 0x10 }, - }, - .fet = { - .reg_addr = 0x99, - .reg_mask = 0x0c, - .disconnect_val = 0x0c, - } - }, - .batt_info = { - .voltage_max = 8800, - .voltage_normal = 7700, - .voltage_min = 6000, - .precharge_current = 256, - .start_charging_min_c = 0, - .start_charging_max_c = 45, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = 0, - .discharging_max_c = 60, - }, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT); - -const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_C235; diff --git a/board/asurada/board.c b/board/asurada/board.c deleted file mode 100644 index b57d327015..0000000000 --- a/board/asurada/board.c +++ /dev/null @@ -1,420 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ -/* Asurada board configuration */ - -#include "adc.h" -#include "button.h" -#include "charge_manager.h" -#include "charge_state_v2.h" -#include "charger.h" -#include "chipset.h" -#include "common.h" -#include "console.h" -#include "driver/accel_lis2dw12.h" -#include "driver/accelgyro_bmi_common.h" -#include "driver/accelgyro_icm_common.h" -#include "driver/accelgyro_icm426xx.h" -#include "driver/als_tcs3400.h" -#include "driver/tcpm/it83xx_pd.h" -#include "driver/temp_sensor/thermistor.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "keyboard_scan.h" -#include "lid_switch.h" -#include "motion_sense.h" -#include "power.h" -#include "pwm.h" -#include "pwm_chip.h" -#include "regulator.h" -#include "spi.h" -#include "switch.h" -#include "tablet_mode.h" -#include "task.h" -#include "temp_sensor.h" -#include "timer.h" -#include "uart.h" - -/* Initialize board. */ -static void board_init(void) -{ - /* Enable motion sensor interrupt */ - gpio_enable_interrupt(GPIO_BASE_IMU_INT_L); - gpio_enable_interrupt(GPIO_LID_ACCEL_INT_L); -} -DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); - -/* Sensor */ -static struct mutex g_base_mutex; -static struct mutex g_lid_mutex; - -static struct bmi_drv_data_t g_bmi160_data; -static struct stprivate_data g_lis2dwl_data; -static struct icm_drv_data_t g_icm426xx_data; - -enum base_accelgyro_type { - BASE_GYRO_NONE = 0, - BASE_GYRO_BMI160 = 1, - BASE_GYRO_ICM426XX = 2, -}; - -static enum base_accelgyro_type base_accelgyro_config; - -#ifdef BOARD_ASURADA_REV0 -/* Matrix to rotate accelerometer into standard reference frame */ -/* for rev 0 */ -static const mat33_fp_t base_standard_ref_rev0 = { - {FLOAT_TO_FP(-1), 0, 0}, - {0, FLOAT_TO_FP(1), 0}, - {0, 0, FLOAT_TO_FP(-1)}, -}; - -static void update_rotation_matrix(void) -{ - motion_sensors[BASE_ACCEL].rot_standard_ref = - &base_standard_ref_rev0; - motion_sensors[BASE_GYRO].rot_standard_ref = - &base_standard_ref_rev0; -} -DECLARE_HOOK(HOOK_INIT, update_rotation_matrix, HOOK_PRIO_INIT_ADC + 2); - -/* TCS3400 private data */ -static struct als_drv_data_t g_tcs3400_data = { - .als_cal.scale = 1, - .als_cal.uscale = 0, - .als_cal.offset = 0, - .als_cal.channel_scale = { - .k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kc */ - .cover_scale = ALS_CHANNEL_SCALE(1.0), /* CT */ - }, -}; - -static struct tcs3400_rgb_drv_data_t g_tcs3400_rgb_data = { - /* - * TODO: calculate the actual coefficients and scaling factors - */ - .calibration.rgb_cal[X] = { - .offset = 0, - .scale = { - .k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kr */ - .cover_scale = ALS_CHANNEL_SCALE(1.0) - }, - .coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0), - .coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0), - .coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0), - .coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0), - }, - .calibration.rgb_cal[Y] = { - .offset = 0, - .scale = { - .k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kg */ - .cover_scale = ALS_CHANNEL_SCALE(1.0) - }, - .coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0), - .coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0), - .coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0), - .coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0.1), - }, - .calibration.rgb_cal[Z] = { - .offset = 0, - .scale = { - .k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kb */ - .cover_scale = ALS_CHANNEL_SCALE(1.0) - }, - .coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0), - .coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0), - .coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0), - .coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0), - }, - .calibration.irt = INT_TO_FP(1), - .saturation.again = TCS_DEFAULT_AGAIN, - .saturation.atime = TCS_DEFAULT_ATIME, -}; -#endif /* BOARD_ASURADA_REV0 */ - -#ifdef BOARD_HAYATO -/* Matrix to rotate accelerometer into standard reference frame */ -/* for Hayato */ -static const mat33_fp_t base_standard_ref = { - {0, FLOAT_TO_FP(1), 0}, - {FLOAT_TO_FP(-1), 0 , 0}, - {0, 0, FLOAT_TO_FP(1)}, -}; - -static void update_rotation_matrix(void) -{ - if (base_accelgyro_config == BASE_GYRO_ICM426XX) - return; - - if (board_get_version() >= 2) { - motion_sensors[BASE_ACCEL].rot_standard_ref = - &base_standard_ref; - motion_sensors[BASE_GYRO].rot_standard_ref = - &base_standard_ref; - } -} -DECLARE_HOOK(HOOK_INIT, update_rotation_matrix, HOOK_PRIO_INIT_ADC + 2); - -#endif - -struct motion_sensor_t icm426xx_base_accel = { - .name = "Base Accel", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_ICM426XX, - .type = MOTIONSENSE_TYPE_ACCEL, - .location = MOTIONSENSE_LOC_BASE, - .drv = &icm426xx_drv, - .mutex = &g_base_mutex, - .drv_data = &g_icm426xx_data, - .port = I2C_PORT_ACCEL, - .i2c_spi_addr_flags = ICM426XX_ADDR0_FLAGS, - .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs. */ - .rot_standard_ref = NULL, - .min_frequency = ICM426XX_ACCEL_MIN_FREQ, - .max_frequency = ICM426XX_ACCEL_MAX_FREQ, - .config = { - /* EC use accel for angle detection */ - [SENSOR_CONFIG_EC_S0] = { - .odr = 10000 | ROUND_UP_FLAG, - .ec_rate = 100 * MSEC, - }, - [SENSOR_CONFIG_EC_S3] = { - .odr = 10000 | ROUND_UP_FLAG, - }, - }, -}; - -struct motion_sensor_t icm426xx_base_gyro = { - .name = "Base Gyro", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_ICM426XX, - .type = MOTIONSENSE_TYPE_GYRO, - .location = MOTIONSENSE_LOC_BASE, - .drv = &icm426xx_drv, - .mutex = &g_base_mutex, - .port = I2C_PORT_ACCEL, - .i2c_spi_addr_flags = ICM426XX_ADDR0_FLAGS, - .default_range = 1000, /* dps */ - .rot_standard_ref = NULL, - .min_frequency = ICM426XX_GYRO_MIN_FREQ, - .max_frequency = ICM426XX_GYRO_MAX_FREQ, -}; - -struct motion_sensor_t motion_sensors[] = { - /* - * Note: bmi160: supports accelerometer and gyro sensor - * Requirement: accelerometer sensor must init before gyro sensor - * DO NOT change the order of the following table. - */ - [BASE_ACCEL] = { - .name = "Base Accel", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_BMI160, - .type = MOTIONSENSE_TYPE_ACCEL, - .location = MOTIONSENSE_LOC_BASE, - .drv = &bmi160_drv, - .mutex = &g_base_mutex, - .drv_data = &g_bmi160_data, - .port = I2C_PORT_ACCEL, - .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS, - .rot_standard_ref = NULL, /* identity matrix */ - .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs */ - .min_frequency = BMI_ACCEL_MIN_FREQ, - .max_frequency = BMI_ACCEL_MAX_FREQ, - .config = { - /* Sensor on for angle detection */ - [SENSOR_CONFIG_EC_S0] = { - .odr = 10000 | ROUND_UP_FLAG, - .ec_rate = 100 * MSEC, - }, - /* Sensor on for angle detection */ - [SENSOR_CONFIG_EC_S3] = { - .odr = 10000 | ROUND_UP_FLAG, - .ec_rate = 100 * MSEC, - }, - }, - }, - [BASE_GYRO] = { - .name = "Base Gyro", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_BMI160, - .type = MOTIONSENSE_TYPE_GYRO, - .location = MOTIONSENSE_LOC_BASE, - .drv = &bmi160_drv, - .mutex = &g_base_mutex, - .drv_data = &g_bmi160_data, - .port = I2C_PORT_ACCEL, - .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS, - .default_range = 1000, /* dps */ - .rot_standard_ref = NULL, /* identity matrix */ - .min_frequency = BMI_GYRO_MIN_FREQ, - .max_frequency = BMI_GYRO_MAX_FREQ, - }, - [LID_ACCEL] = { - .name = "Lid Accel", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_LIS2DWL, - .type = MOTIONSENSE_TYPE_ACCEL, - .location = MOTIONSENSE_LOC_LID, - .drv = &lis2dw12_drv, - .mutex = &g_lid_mutex, - .drv_data = &g_lis2dwl_data, - .int_signal = GPIO_LID_ACCEL_INT_L, - .port = I2C_PORT_ACCEL, - .i2c_spi_addr_flags = LIS2DWL_ADDR1_FLAGS, - .flags = MOTIONSENSE_FLAG_INT_SIGNAL, - .rot_standard_ref = NULL, /* identity matrix */ - .default_range = 2, /* g */ - .min_frequency = LIS2DW12_ODR_MIN_VAL, - .max_frequency = LIS2DW12_ODR_MAX_VAL, - .config = { - /* EC use accel for angle detection */ - [SENSOR_CONFIG_EC_S0] = { - .odr = 12500 | ROUND_UP_FLAG, - }, - /* Sensor on for lid angle detection */ - [SENSOR_CONFIG_EC_S3] = { - .odr = 10000 | ROUND_UP_FLAG, - }, - }, - }, -#ifdef BOARD_ASURADA_REV0 - [CLEAR_ALS] = { - .name = "Clear Light", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_TCS3400, - .type = MOTIONSENSE_TYPE_LIGHT, - .location = MOTIONSENSE_LOC_LID, - .drv = &tcs3400_drv, - .drv_data = &g_tcs3400_data, - .port = I2C_PORT_ACCEL, - .i2c_spi_addr_flags = TCS3400_I2C_ADDR_FLAGS, - .rot_standard_ref = NULL, - .default_range = 0x10000, /* scale = 1x, uscale = 0 */ - .min_frequency = TCS3400_LIGHT_MIN_FREQ, - .max_frequency = TCS3400_LIGHT_MAX_FREQ, - .config = { - /* Run ALS sensor in S0 */ - [SENSOR_CONFIG_EC_S0] = { - .odr = 1000, - }, - }, - }, - [RGB_ALS] = { - .name = "RGB Light", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_TCS3400, - .type = MOTIONSENSE_TYPE_LIGHT_RGB, - .location = MOTIONSENSE_LOC_LID, - .drv = &tcs3400_rgb_drv, - .drv_data = &g_tcs3400_rgb_data, - .rot_standard_ref = NULL, - .default_range = 0x10000, /* scale = 1x, uscale = 0 */ - /* freq = 0 indicates we should not use sensor directly */ - .min_frequency = 0, - .max_frequency = 0, - }, -#endif /* BOARD_ASURADA_REV0 */ -}; -const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors); - -void motion_interrupt(enum gpio_signal signal) -{ - if (base_accelgyro_config == BASE_GYRO_ICM426XX) - icm426xx_interrupt(signal); - else - bmi160_interrupt(signal); -} - -static void board_detect_motionsense(void) -{ - int val; - - if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) - return; - if (base_accelgyro_config != BASE_GYRO_NONE) - return; - - icm_read8(&icm426xx_base_accel, ICM426XX_REG_WHO_AM_I, &val); - if (val == ICM426XX_CHIP_ICM40608) { - motion_sensors[BASE_ACCEL] = icm426xx_base_accel; - motion_sensors[BASE_GYRO] = icm426xx_base_gyro; - base_accelgyro_config = BASE_GYRO_ICM426XX; - ccprints("Base Accelgyro: ICM426XX"); - } else { - base_accelgyro_config = BASE_GYRO_BMI160; - ccprints("Base Accelgyro: BMI160"); - } -} -DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_detect_motionsense, - HOOK_PRIO_DEFAULT); -DECLARE_HOOK(HOOK_INIT, board_detect_motionsense, HOOK_PRIO_DEFAULT); - -/* ADC channels. Must be in the exactly same order as in enum adc_channel. */ -const struct adc_t adc_channels[] = { - /* Convert to mV (3000mV/1024). */ - {"VBUS_C0", ADC_MAX_MVOLT * 10, ADC_READ_MAX + 1, 0, CHIP_ADC_CH0}, - {"BOARD_ID_0", ADC_MAX_MVOLT, ADC_READ_MAX + 1, 0, CHIP_ADC_CH1}, - {"BOARD_ID_1", ADC_MAX_MVOLT, ADC_READ_MAX + 1, 0, CHIP_ADC_CH2}, - /* AMON/BMON gain = 17.97 */ - {"CHARGER_AMON_R", ADC_MAX_MVOLT * 1000 / 17.97, ADC_READ_MAX + 1, 0, - CHIP_ADC_CH3}, - {"VBUS_C1", ADC_MAX_MVOLT * 10, ADC_READ_MAX + 1, 0, CHIP_ADC_CH5}, - {"CHARGER_PMON", ADC_MAX_MVOLT, ADC_READ_MAX + 1, 0, CHIP_ADC_CH6}, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -/* PWM */ - -/* - * PWM channels. Must be in the exactly same order as in enum pwm_channel. - * There total three 16 bits clock prescaler registers for all pwm channels, - * so use the same frequency and prescaler register setting is required if - * number of pwm channel greater than three. - */ -const struct pwm_t pwm_channels[] = { - [PWM_CH_LED1] = { - .channel = 0, - .flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW, - .freq_hz = 324, /* maximum supported frequency */ - .pcfsr_sel = PWM_PRESCALER_C4 - }, - [PWM_CH_LED2] = { - .channel = 1, - .flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW, - .freq_hz = 324, /* maximum supported frequency */ - .pcfsr_sel = PWM_PRESCALER_C4 - }, - [PWM_CH_LED3] = { - .channel = 2, - .flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW, - .freq_hz = 324, /* maximum supported frequency */ - .pcfsr_sel = PWM_PRESCALER_C4 - }, -}; -BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); - -int board_accel_force_mode_mask(void) -{ - int version = board_get_version(); - - if (version == -1 || version >= 2) - return 0; - return BIT(LID_ACCEL); -} - -static void board_suspend(void) -{ - if (board_get_version() >= 3) - gpio_set_level(GPIO_EN_5V_USM, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_suspend, HOOK_PRIO_DEFAULT); - -static void board_resume(void) -{ - if (board_get_version() >= 3) - gpio_set_level(GPIO_EN_5V_USM, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_resume, HOOK_PRIO_DEFAULT); diff --git a/board/asurada/board.h b/board/asurada/board.h deleted file mode 100644 index d8ee03c9f4..0000000000 --- a/board/asurada/board.h +++ /dev/null @@ -1,142 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ -/* Asurada board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -#include "baseboard.h" - -/* Chipset config */ - -/* Optional features */ -#define CONFIG_LTO - -/* - * TODO: Remove this option once the VBAT no longer keeps high when - * system's power isn't presented. - */ -#define CONFIG_IT83XX_RESET_PD_CONTRACT_IN_BRAM - -/* BC12 */ -/* TODO(b/159583342): remove after rev0 deprecated */ -#define CONFIG_MT6360_BC12_GPIO - -/* LED */ -#ifdef BOARD_HAYATO -#define CONFIG_LED_ONOFF_STATES -#define CONFIG_LED_ONOFF_STATES_BAT_LOW 10 -#endif - -/* PD / USB-C / PPC */ -#define CONFIG_USB_PD_DEBUG_LEVEL 3 -#define PD_MAX_CURRENT_MA 3000 -#define PD_OPERATING_POWER_MW 15000 -#ifdef BOARD_HAYATO -#define PD_MAX_VOLTAGE_MV 15000 -#define PD_MAX_POWER_MW 45000 -#else -#define PD_MAX_VOLTAGE_MV 20000 -#define PD_MAX_POWER_MW 60000 -#endif -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* Optional console commands */ -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_SCRATCHPAD -#define CONFIG_CMD_STACKOVERFLOW - -#define CONFIG_BATT_FULL_CHIPSET_OFF_INPUT_LIMIT_MV 9000 - -/* Sensor */ -#define CONFIG_GMR_TABLET_MODE -#define CONFIG_TABLET_MODE -#define CONFIG_TABLET_MODE_SWITCH -#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L - -#define CONFIG_ACCELGYRO_BMI160 /* Base accel */ -#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) -#define CONFIG_ACCELGYRO_ICM426XX /* Base accel */ -#define CONFIG_ACCELGYRO_ICM426XX_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) - -#define CONFIG_ACCEL_LIS2DWL -#define CONFIG_ACCEL_LIS2DW_AS_BASE -#define CONFIG_ACCEL_LIS2DW12_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(LID_ACCEL) - -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL -#define CONFIG_LID_ANGLE_UPDATE - -#ifdef BOARD_ASURADA_REV0 -#define CONFIG_ALS -#define ALS_COUNT 1 -#define CONFIG_ALS_TCS3400 -#define CONFIG_ALS_TCS3400_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(CLEAR_ALS) -#define CONFIG_ALS_TCS3400_EMULATED_IRQ_EVENT - -#define CONFIG_ACCEL_FORCE_MODE_MASK (BIT(LID_ACCEL) | BIT(CLEAR_ALS)) -#else -/* TODO(b/171931139): remove this after rev1 board deprecated */ -#define CONFIG_ACCEL_FORCE_MODE_MASK (board_accel_force_mode_mask()) -#endif - -/* SPI / Host Command */ -#undef CONFIG_HOSTCMD_DEBUG_MODE -#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF - -/* USB-A */ -#define USBA_PORT_COUNT 1 - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -enum battery_type { - BATTERY_C235, - BATTERY_TYPE_COUNT, -}; - -enum sensor_id { - BASE_ACCEL = 0, - BASE_GYRO, - LID_ACCEL, -#ifdef BOARD_ASURADA_REV0 - CLEAR_ALS, - RGB_ALS, -#endif - SENSOR_COUNT, -}; - -enum adc_channel { - ADC_VBUS_C0, /* ADC 0 */ - ADC_BOARD_ID_0, /* ADC 1 */ - ADC_BOARD_ID_1, /* ADC 2 */ - ADC_CHARGER_AMON_R, /* ADC 3 */ - ADC_VBUS_C1, /* ADC 5 */ - ADC_CHARGER_PMON, /* ADC 6 */ - - /* Number of ADC channels */ - ADC_CH_COUNT, -}; - -enum pwm_channel { - PWM_CH_LED1, - PWM_CH_LED2, - PWM_CH_LED3, - PWM_CH_COUNT, -}; - -int board_accel_force_mode_mask(void); -void motion_interrupt(enum gpio_signal signal); - -#endif /* !__ASSEMBLER__ */ -#endif /* __CROS_EC_BOARD_H */ diff --git a/board/asurada/build.mk b/board/asurada/build.mk deleted file mode 100644 index d6866f8568..0000000000 --- a/board/asurada/build.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -*- makefile -*- -# Copyright 2020 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Board specific files build - -# the IC is ITE IT8xxx2 -CHIP:=it83xx -CHIP_FAMILY:=it8xxx2 -CHIP_VARIANT:=it81202bx_1024 -BASEBOARD:=asurada - -board-$(BOARD_HAYATO)=led_hayato.o -board-$(BOARD_ASURADA)=led.o -board-y+=battery.o board.o -board-y+=usbc_config.o diff --git a/board/asurada/ec.tasklist b/board/asurada/ec.tasklist deleted file mode 100644 index ff47718bae..0000000000 --- a/board/asurada/ec.tasklist +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/** - * See CONFIG_TASK_LIST in config.h for details. - */ -#define CONFIG_TASK_LIST \ - TASK_ALWAYS(HOOKS, hook_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_NOTEST(CHIPSET, chipset_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 1, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_NOTEST(PDCMD, pd_command_task, NULL, 1024) \ - TASK_ALWAYS(HOSTCMD, host_command_task, NULL, 1024) \ - TASK_ALWAYS(CONSOLE, console_task, NULL, LARGER_TASK_STACK_SIZE) \ - TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE) \ - TASK_ALWAYS(PD_C0, pd_task, NULL, 1280) \ - TASK_ALWAYS(PD_C1, pd_task, NULL, 1280) \ - diff --git a/board/asurada/gpio.inc b/board/asurada/gpio.inc deleted file mode 100644 index 75d1fbafa5..0000000000 --- a/board/asurada/gpio.inc +++ /dev/null @@ -1,170 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. */ - -/* Wake Source interrupts */ -GPIO_INT(POWER_BUTTON_L, PIN(E, 4), GPIO_INT_BOTH | GPIO_PULL_UP | - GPIO_HIB_WAKE_HIGH, power_button_interrupt) /* H1_EC_PWR_BTN_ODL */ -GPIO_INT(LID_OPEN, PIN(E, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, - lid_interrupt) -GPIO_INT(TABLET_MODE_L, PIN(J, 7), GPIO_INT_BOTH, - gmr_tablet_switch_isr) - -/* Chipset interrupts */ -GPIO_INT(AP_EC_WARM_RST_REQ, PIN(D, 3), GPIO_INT_RISING | GPIO_SEL_1P8V, - chipset_reset_request_interrupt) - -/* Power sequencing interrupts */ -GPIO_INT(AP_EC_WATCHDOG_L, PIN(C, 7), GPIO_INT_BOTH | GPIO_SEL_1P8V, - chipset_watchdog_interrupt) -GPIO_INT(AP_IN_SLEEP_L, PIN(F, 2), - GPIO_INT_BOTH | GPIO_PULL_DOWN | GPIO_SEL_1P8V, power_signal_interrupt) -GPIO_INT(PMIC_EC_PWRGD, PIN(F, 3), - GPIO_INT_BOTH | GPIO_PULL_DOWN | GPIO_SEL_1P8V, power_signal_interrupt) - -/* Sensor Interrupts */ -GPIO_INT(BASE_IMU_INT_L, PIN(J, 2), GPIO_INT_FALLING | GPIO_SEL_1P8V, - motion_interrupt) -GPIO_INT(LID_ACCEL_INT_L, PIN(J, 3), GPIO_INT_FALLING | GPIO_SEL_1P8V, - lis2dw12_interrupt) -#ifdef BOARD_ASURADA_REV0 -GPIO_INT(ALS_RGB_INT_ODL, PIN(F, 0), GPIO_INT_FALLING, - tcs3400_interrupt) -#else -GPIO(ALS_RGB_INT_ODL, PIN(F, 0), GPIO_INPUT) -#endif - -/* USB-C interrupts */ -GPIO_INT(USB_C0_PPC_INT_ODL, PIN(D, 1), GPIO_INT_BOTH, ppc_interrupt) -GPIO_INT(USB_C0_BC12_INT_ODL,PIN(J, 6), GPIO_INT_FALLING, bc12_interrupt) -GPIO_INT(USB_C1_BC12_INT_L, PIN(J, 4), GPIO_INT_FALLING, bc12_interrupt) - -/* Volume button interrupts */ -/* Note that netnames are reversed in asurada rev 0/1 */ -GPIO_INT(VOLUME_DOWN_L, PIN(D, 5), GPIO_INT_BOTH | GPIO_PULL_UP, - button_interrupt) /* EC_VOLDN_BTN_ODL */ -GPIO_INT(VOLUME_UP_L, PIN(D, 6), GPIO_INT_BOTH | GPIO_PULL_UP, - button_interrupt) /* EC_VOLUP_BTN_ODL */ - -/* Other interrupts */ -GPIO_INT(AP_XHCI_INIT_DONE, PIN(D, 2), GPIO_INT_BOTH | GPIO_PULL_DOWN | GPIO_SEL_1P8V, - usb_a0_interrupt) -#ifdef BOARD_ASURADA_REV0 -GPIO_INT(AC_PRESENT, PIN(M, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, - extpower_interrupt) /* AC_OK / AC_PRESENT in rev0 */ -#else /* HAYATO */ -GPIO_INT(AC_PRESENT, PIN(E, 5), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, - extpower_interrupt) /* AC_OK / AC_PRESENT in rev1+ */ -#endif -GPIO_INT(UART1_RX, PIN(B, 0), GPIO_INT_FALLING, - uart_deepsleep_interrupt) /* UART_DEBUG_TX_EC_RX */ -GPIO_INT(WP, PIN(I, 4), GPIO_INT_BOTH | GPIO_SEL_1P8V, - switch_interrupt) /* EC_FLASH_WP_OD */ -GPIO_INT(SPI0_CS, PIN(M, 5), GPIO_INT_FALLING, - spi_event) /* SPI slave Chip Select -- AP_SPI_EC_CS_L */ -GPIO_INT(X_EC_GPIO2, PIN(B, 2), GPIO_ODR_HIGH, x_ec_interrupt) - -/* Power Sequencing Signals */ -GPIO(EC_PMIC_EN_ODL, PIN(D, 0), GPIO_ODR_HIGH | GPIO_SEL_1P8V) -GPIO(EC_PMIC_WATCHDOG_L, PIN(H, 0), GPIO_ODR_LOW | GPIO_SEL_1P8V) -GPIO(EN_PP5000_A, PIN(C, 6), GPIO_OUT_HIGH) -GPIO(PG_MT6315_PROC_ODL, PIN(E, 1), GPIO_INPUT) -GPIO(PG_MT6360_ODL, PIN(F, 1), GPIO_INPUT) -GPIO(PG_PP5000_A_ODL, PIN(A, 6), GPIO_INPUT) -GPIO(EN_SLP_Z, PIN(E, 3), GPIO_OUT_LOW) -GPIO(SYS_RST_ODL, PIN(B, 6), GPIO_ODR_LOW) -GPIO(EC_BL_EN_OD, PIN(B, 5), GPIO_ODR_LOW | GPIO_SEL_1P8V) - -/* MKBP event synchronization */ -GPIO(EC_INT_L, PIN(E, 6), GPIO_ODR_HIGH | GPIO_SEL_1P8V) /* EC_AP_INT_ODL */ - -/* USB and USBC Signals */ -GPIO(DP_AUX_PATH_SEL, PIN(G, 0), GPIO_OUT_HIGH) -GPIO(EC_DPBRDG_HPD_ODL, PIN(J, 0), GPIO_ODR_HIGH | GPIO_SEL_1P8V) -GPIO(EN_PP5000_USB_A0_VBUS, PIN(B, 7), GPIO_OUT_LOW) -GPIO(USB_C0_FRS_EN, PIN(H, 3), GPIO_OUT_LOW) - -/* Misc Signals */ -GPIO(EC_BATT_PRES_ODL, PIN(C, 0), GPIO_INPUT) -GPIO(BC12_DET_EN, PIN(J, 5), GPIO_OUT_LOW) /* EN_USB_C0_BC12_DET */ -GPIO(EN_EC_ID_ODL, PIN(H, 5), GPIO_ODR_LOW) -GPIO(ENTERING_RW, PIN(C, 5), GPIO_OUT_LOW) /* EC_ENTERING_RW */ -GPIO(EN_5V_USM, PIN(D, 7), GPIO_OUT_LOW) - -/* I2C pins - Alternate function below configures I2C module on these pins */ -GPIO(I2C_A_SCL, PIN(B, 3), GPIO_INPUT) /* I2C_CHG_BATT_SCL */ -GPIO(I2C_A_SDA, PIN(B, 4), GPIO_INPUT) /* I2C_CHG_BATT_SDA */ -GPIO(I2C_B_SCL, PIN(C, 1), GPIO_INPUT | GPIO_SEL_1P8V) /* I2C_SENSOR_SCL */ -GPIO(I2C_B_SDA, PIN(C, 2), GPIO_INPUT | GPIO_SEL_1P8V) /* I2C_SENSOR_SDA */ -GPIO(I2C_C_SCL, PIN(F, 6), GPIO_INPUT) /* I2C_USB_C0_SCL */ -GPIO(I2C_C_SDA, PIN(F, 7), GPIO_INPUT) /* I2C_USB_C0_SCL */ -GPIO(I2C_E_SCL, PIN(E, 0), GPIO_INPUT) /* I2C_USB_C1_SCL */ -GPIO(I2C_E_SDA, PIN(E, 7), GPIO_INPUT) /* I2C_USB_C1_SDA */ - -/* SPI pins - Alternate function below configures SPI module on these pins */ - -/* NC / TP */ - -/* Keyboard pins */ - -/* Subboards HDMI/TYPEC */ -GPIO(EC_X_GPIO1, PIN(H, 4), GPIO_OUT_LOW) -GPIO(EC_X_GPIO3, PIN(J, 1), GPIO_INPUT) - -/* Alternate functions GPIO definitions */ -ALTERNATE(PIN_MASK(B, 0x18), 1, MODULE_I2C, 0) /* I2C A */ -ALTERNATE(PIN_MASK(C, 0x06), 1, MODULE_I2C, GPIO_SEL_1P8V) /* I2C B */ -ALTERNATE(PIN_MASK(F, 0xC0), 1, MODULE_I2C, 0) /* I2C C */ -ALTERNATE(PIN_MASK(E, 0x81), 1, MODULE_I2C, 0) /* I2C E */ - -/* UART */ -ALTERNATE(PIN_MASK(B, 0x03), 1, MODULE_UART, 0) /* EC to Servo */ - -/* PWM */ -ALTERNATE(PIN_MASK(A, 0x07), 1, MODULE_PWM, 0) /* PWM 0~2 */ - -/* ADC */ -ALTERNATE(PIN_MASK(I, 0x6F), 0, MODULE_ADC, 0) /* ADC 0,1,2,3,5,6 */ - -/* SPI */ -ALTERNATE(PIN_MASK(M, 0x33), 0, MODULE_SPI, 0) /* SPI */ - -/* Unimplemented Pins */ -GPIO(SET_VMC_VOLT_AT_1V8, PIN(D, 4), GPIO_INPUT | GPIO_PULL_DOWN | GPIO_SEL_1P8V) -GPIO(PACKET_MODE_EN, PIN(A, 3), GPIO_INPUT | GPIO_PULL_DOWN) -/* b/160218054: behavior not defined */ -/* *_ODL pin has external pullup so don't pull it down. */ -GPIO(USB_A0_FAULT_ODL, PIN(A, 7), GPIO_INPUT) -GPIO(CHARGER_PROCHOT_ODL, PIN(C, 3), GPIO_INPUT) -GPIO(PG_MT6315_GPU_ODL, PIN(H, 6), GPIO_INPUT) -GPIO(EN_PP3000_SD_U, PIN(G, 1), GPIO_INPUT | GPIO_PULL_DOWN | GPIO_SEL_1P8V) -/* reserved for future use */ -GPIO(CCD_MODE_ODL, PIN(C, 4), GPIO_INPUT) -/* - * ADC pins don't have internal pull-down capability, - * so we set them as output low. - */ -GPIO(NC_GPI7, PIN(I, 7), GPIO_OUT_LOW) -/* NC pins, enable internal pull-up/down to avoid floating state. */ -#ifdef BOARD_ASURADA_REV0 -GPIO(NC_GPE5, PIN(E, 5), GPIO_INPUT | GPIO_PULL_UP) -#else /* HAYATO */ -GPIO(NC_GPM2, PIN(M, 2), GPIO_INPUT | GPIO_PULL_DOWN) -#endif -GPIO(NC_GPM3, PIN(M, 3), GPIO_INPUT | GPIO_PULL_DOWN) -GPIO(NC_GPM6, PIN(M, 6), GPIO_INPUT | GPIO_PULL_DOWN) -GPIO(SPI_CLK_GPG6, PIN(G, 6), GPIO_INPUT | GPIO_PULL_UP) -/* - * These 4 pins don't have internal pull-down capability, - * so we set them as output low. - */ -GPIO(NC_GPG3, PIN(G, 3), GPIO_OUT_LOW) -GPIO(SPI_MOSI_GPG4, PIN(G, 4), GPIO_OUT_LOW) -GPIO(SPI_MISO_GPG5, PIN(G, 5), GPIO_OUT_LOW) -GPIO(SPI_CS_GPG7, PIN(G, 7), GPIO_OUT_LOW) diff --git a/board/asurada/led.c b/board/asurada/led.c deleted file mode 100644 index 166ece92e9..0000000000 --- a/board/asurada/led.c +++ /dev/null @@ -1,205 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Power and battery LED control for Asurada - */ -#include "charge_manager.h" -#include "charge_state.h" -#include "common.h" -#include "console.h" -#include "driver/bc12/mt6360.h" -#include "hooks.h" -#include "led_common.h" -#include "pwm.h" -#include "stdbool.h" -#include "util.h" - -#define CPRINTS(format, args...) cprints(CC_PWM, format, ## args) - -#define LED_OFF EC_LED_COLOR_COUNT - -const enum ec_led_id supported_led_ids[] = { - /* Main LED */ - EC_LED_ID_LEFT_LED, - EC_LED_ID_RIGHT_LED, - - /* Not used, give them some random name for testing */ - EC_LED_ID_POWER_LED, - EC_LED_ID_BATTERY_LED -}; -const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); - -static void led_set_color_left(enum ec_led_colors color, int duty) -{ - mt6360_led_set_brightness(MT6360_LED_RGB2, duty); - mt6360_led_set_brightness(MT6360_LED_RGB3, duty); - - switch (color) { - case EC_LED_COLOR_AMBER: - mt6360_led_enable(MT6360_LED_RGB2, 0); - mt6360_led_enable(MT6360_LED_RGB3, 1); - break; - case EC_LED_COLOR_WHITE: - mt6360_led_enable(MT6360_LED_RGB2, 1); - mt6360_led_enable(MT6360_LED_RGB3, 0); - break; - default: /* LED_OFF and other unsupported colors */ - mt6360_led_enable(MT6360_LED_RGB2, 0); - mt6360_led_enable(MT6360_LED_RGB3, 0); - break; - } -} - -static void led_set_color_right(enum ec_led_colors color, int duty) -{ - pwm_set_duty(PWM_CH_LED2, duty); - pwm_set_duty(PWM_CH_LED3, duty); - - switch (color) { - case EC_LED_COLOR_AMBER: - pwm_enable(PWM_CH_LED2, 0); - pwm_enable(PWM_CH_LED3, 1); - break; - case EC_LED_COLOR_WHITE: - pwm_enable(PWM_CH_LED2, 1); - pwm_enable(PWM_CH_LED3, 0); - break; - default: /* LED_OFF and other unsupported colors */ - pwm_enable(PWM_CH_LED2, 0); - pwm_enable(PWM_CH_LED3, 0); - break; - } -} - -static void led_set_color_power(enum ec_led_colors color, int duty) -{ - pwm_set_duty(PWM_CH_LED1, duty); - pwm_enable(PWM_CH_LED1, color == EC_LED_COLOR_WHITE); -} - -static void led_set_color_battery(enum ec_led_colors color, int duty) -{ - mt6360_led_set_brightness(MT6360_LED_RGB1, duty); - mt6360_led_enable(MT6360_LED_RGB1, color == EC_LED_COLOR_WHITE); -} - -static enum ec_error_list set_color(enum ec_led_id led_id, - enum ec_led_colors color, - int duty) -{ - switch (led_id) { - case EC_LED_ID_LEFT_LED: - led_set_color_left(color, duty); - return EC_SUCCESS; - case EC_LED_ID_RIGHT_LED: - led_set_color_right(color, duty); - return EC_SUCCESS; - case EC_LED_ID_POWER_LED: - led_set_color_power(color, duty); - return EC_SUCCESS; - case EC_LED_ID_BATTERY_LED: - led_set_color_battery(color, duty); - return EC_SUCCESS; - default: - return EC_ERROR_INVAL; - } -} - -void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) -{ - switch (led_id) { - case EC_LED_ID_LEFT_LED: - brightness_range[EC_LED_COLOR_AMBER] = - MT6360_LED_BRIGHTNESS_MAX; - brightness_range[EC_LED_COLOR_WHITE] = - MT6360_LED_BRIGHTNESS_MAX; - break; - case EC_LED_ID_RIGHT_LED: - brightness_range[EC_LED_COLOR_AMBER] = 100; - brightness_range[EC_LED_COLOR_WHITE] = 100; - break; - case EC_LED_ID_POWER_LED: - brightness_range[EC_LED_COLOR_WHITE] = 100; - break; - case EC_LED_ID_BATTERY_LED: - brightness_range[EC_LED_COLOR_WHITE] = - MT6360_LED_BRIGHTNESS_MAX; - break; - default: - break; - } -} - -int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness) -{ - if (brightness[EC_LED_COLOR_AMBER]) - return set_color(led_id, EC_LED_COLOR_AMBER, - brightness[EC_LED_COLOR_AMBER]); - if (brightness[EC_LED_COLOR_WHITE]) - return set_color(led_id, EC_LED_COLOR_WHITE, - brightness[EC_LED_COLOR_WHITE]); - - return set_color(led_id, LED_OFF, 0); -} - -static void update_led(enum ec_led_id led_id, bool is_active_charge_port, - int duty, int tick) -{ - enum charge_state power_state = charge_get_state(); - - if (power_state == PWR_STATE_IDLE) { - /* Factory mode: blinking white (2sec on + 2sec off) */ - set_color(led_id, (tick % 8 < 4) ? EC_LED_COLOR_WHITE : LED_OFF, - duty); - } else if (power_state == PWR_STATE_ERROR) { - /* Battery error: blinking amber (1sec on + 1sec off) */ - set_color(led_id, (tick % 4 < 2) ? EC_LED_COLOR_AMBER : LED_OFF, - duty); - } else if (is_active_charge_port) { - /* - * Active charge port: amber when charging, white if fully - * charged. - */ - if (power_state == PWR_STATE_CHARGE) - set_color(led_id, EC_LED_COLOR_AMBER, duty); - else - set_color(led_id, EC_LED_COLOR_WHITE, duty); - } else { - /* - * Non-active port: - * Solid white in S0, blinking amber (3sec on + 1sec off) in S3, - * and LED off in S5 - */ - if (chipset_in_state(CHIPSET_STATE_ON)) - set_color(led_id, EC_LED_COLOR_WHITE, duty); - else if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND)) - set_color( - led_id, - (tick % 8 < 6) ? EC_LED_COLOR_AMBER : LED_OFF, - duty); - else - set_color(led_id, LED_OFF, 0); - - } -} - -static void led_tick(void) -{ - static int tick; - int port = charge_manager_get_active_charge_port(); - - ++tick; - /* Pick duty 1 and 50 respectively to have same brightness */ - if (led_auto_control_is_enabled(EC_LED_ID_LEFT_LED)) - update_led(EC_LED_ID_LEFT_LED, port == 0, 1, tick); - if (led_auto_control_is_enabled(EC_LED_ID_RIGHT_LED)) - update_led(EC_LED_ID_RIGHT_LED, port == 1, 50, tick); - /* Turn off unused LEDs */ - if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED)) - set_color(EC_LED_ID_POWER_LED, LED_OFF, 0); - if (led_auto_control_is_enabled(EC_LED_ID_BATTERY_LED)) - set_color(EC_LED_ID_BATTERY_LED, LED_OFF, 0); -} -DECLARE_HOOK(HOOK_TICK, led_tick, HOOK_PRIO_DEFAULT); -DECLARE_HOOK(HOOK_INIT, led_tick, HOOK_PRIO_DEFAULT); diff --git a/board/asurada/led_hayato.c b/board/asurada/led_hayato.c deleted file mode 100644 index 1d3108c47b..0000000000 --- a/board/asurada/led_hayato.c +++ /dev/null @@ -1,120 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "ec_commands.h" -#include "gpio.h" -#include "led_common.h" -#include "led_onoff_states.h" -#include "chipset.h" -#include "driver/bc12/mt6360.h" - -__override const int led_charge_lvl_1 = 5; -__override const int led_charge_lvl_2 = 95; - -__override struct led_descriptor - led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = { - [STATE_CHARGING_LVL_1] = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} }, - [STATE_CHARGING_LVL_2] = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} }, - [STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} }, - [STATE_DISCHARGE_S0] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_DISCHARGE_S0_BAT_LOW] = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC}, - {LED_OFF, 3 * LED_ONE_SEC} }, - [STATE_DISCHARGE_S3] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_DISCHARGE_S5] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_BATTERY_ERROR] = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC}, - {LED_OFF, 1 * LED_ONE_SEC} }, - [STATE_FACTORY_TEST] = {{EC_LED_COLOR_WHITE, 2 * LED_ONE_SEC}, - {EC_LED_COLOR_AMBER, 2 * LED_ONE_SEC} }, -}; - -__override const struct led_descriptor - led_pwr_state_table[PWR_LED_NUM_STATES][LED_NUM_PHASES] = { - [PWR_LED_STATE_ON] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} }, - [PWR_LED_STATE_SUSPEND_AC] = {{EC_LED_COLOR_WHITE, 1 * LED_ONE_SEC}, - {LED_OFF, 3 * LED_ONE_SEC} }, - [PWR_LED_STATE_SUSPEND_NO_AC] = {{EC_LED_COLOR_WHITE, 1 * LED_ONE_SEC}, - {LED_OFF, 3 * LED_ONE_SEC} }, - [PWR_LED_STATE_OFF] = {{LED_OFF, LED_INDEFINITE} }, -}; - - -const enum ec_led_id supported_led_ids[] = { - EC_LED_ID_BATTERY_LED, - EC_LED_ID_POWER_LED, -}; - -const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); - -__override void led_set_color_battery(enum ec_led_colors color) -{ - mt6360_led_set_brightness(MT6360_LED_RGB2, 50); - mt6360_led_set_brightness(MT6360_LED_RGB3, 50); - - switch (color) { - case EC_LED_COLOR_AMBER: - mt6360_led_enable(MT6360_LED_RGB2, 0); - mt6360_led_enable(MT6360_LED_RGB3, 1); - break; - case EC_LED_COLOR_WHITE: - mt6360_led_enable(MT6360_LED_RGB2, 1); - mt6360_led_enable(MT6360_LED_RGB3, 0); - break; - default: /* LED_OFF and other unsupported colors */ - mt6360_led_enable(MT6360_LED_RGB2, 0); - mt6360_led_enable(MT6360_LED_RGB3, 0); - break; - } -} - -__override void led_set_color_power(enum ec_led_colors color) -{ - mt6360_led_set_brightness(MT6360_LED_RGB1, 1); - mt6360_led_enable(MT6360_LED_RGB1, color == EC_LED_COLOR_WHITE); -} - -void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) -{ - if (led_id == EC_LED_ID_BATTERY_LED) { - brightness_range[EC_LED_COLOR_AMBER] = - MT6360_LED_BRIGHTNESS_MAX; - brightness_range[EC_LED_COLOR_WHITE] = - MT6360_LED_BRIGHTNESS_MAX; - } else if (led_id == EC_LED_ID_POWER_LED) { - brightness_range[EC_LED_COLOR_WHITE] = - MT6360_LED_BRIGHTNESS_MAX; - } -} - -int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness) -{ - if (led_id == EC_LED_ID_BATTERY_LED) { - if (brightness[EC_LED_COLOR_AMBER] != 0) - led_set_color_battery(EC_LED_COLOR_AMBER); - else if (brightness[EC_LED_COLOR_WHITE] != 0) - led_set_color_battery(EC_LED_COLOR_WHITE); - else - led_set_color_battery(LED_OFF); - } else if (led_id == EC_LED_ID_POWER_LED) { - if (brightness[EC_LED_COLOR_WHITE] != 0) - led_set_color_power(EC_LED_COLOR_WHITE); - else - led_set_color_power(LED_OFF); - } - - return EC_SUCCESS; -} - -__override enum led_states board_led_get_state(enum led_states desired_state) -{ - if (desired_state == STATE_BATTERY_ERROR) { - if (chipset_in_state(CHIPSET_STATE_ON)) - return desired_state; - else if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND)) - return STATE_DISCHARGE_S3; - else - return STATE_DISCHARGE_S5; - } - return desired_state; -} diff --git a/board/asurada/usbc_config.c b/board/asurada/usbc_config.c deleted file mode 100644 index 2f35816abb..0000000000 --- a/board/asurada/usbc_config.c +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Asurada board-specific USB-C configuration */ - -#include "driver/ppc/syv682x.h" -#include "driver/usb_mux/ps8743.h" -#include "hooks.h" - -__override int syv682x_board_is_syv682c(int port) -{ - return board_get_version() > 2; -} - -void board_usb_mux_init(void) -{ - if (board_get_sub_board() == SUB_BOARD_TYPEC) { - ps8743_tune_usb_eq(&usb_muxes[1], - PS8743_USB_EQ_TX_12_8_DB, - PS8743_USB_EQ_RX_12_8_DB); - ps8743_write(&usb_muxes[1], - PS8743_REG_HS_DET_THRESHOLD, - PS8743_USB_HS_THRESH_NEG_10); - } -} -DECLARE_HOOK(HOOK_INIT, board_usb_mux_init, HOOK_PRIO_INIT_I2C + 1); diff --git a/board/asurada/vif_override.xml b/board/asurada/vif_override.xml deleted file mode 100644 index 32736caf64..0000000000 --- a/board/asurada/vif_override.xml +++ /dev/null @@ -1,3 +0,0 @@ -<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File - Definition from the USB-IF. ---> |