diff options
Diffstat (limited to 'board/atlas/board.h')
| -rw-r--r-- | board/atlas/board.h | 269 |
1 files changed, 0 insertions, 269 deletions
diff --git a/board/atlas/board.h b/board/atlas/board.h deleted file mode 100644 index 56685f1856..0000000000 --- a/board/atlas/board.h +++ /dev/null @@ -1,269 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Atlas board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* - * By default, enable all console messages excepted HC, ACPI and event: - * The sensor stack is generating a lot of activity. - */ -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) -#undef CONFIG_HOSTCMD_DEBUG_MODE -#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF - -/* EC */ -#define CONFIG_ADC -#define CONFIG_BOARD_FORCE_RESET_PIN -#define CONFIG_DPTF -#define CONFIG_FPU -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_LID_SWITCH -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_LTO -#define CONFIG_CHIP_PANIC_BACKUP -#define CONFIG_SOFTWARE_PANIC -#define CONFIG_PWM -#define CONFIG_PWM_KBLIGHT -#define CONFIG_SHA256_UNROLLED - -/* Internal SPI flash on NPCX7 */ -#define CONFIG_FLASH_SIZE_BYTES (512 * 1024) /* It's really 1MB. */ -#define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25Q80 /* Internal SPI flash type. */ - -#define CONFIG_VBOOT_HASH -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 -#define CONFIG_WATCHDOG_HELP - -/* EC console commands */ -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO -#define CONFIG_CMD_BATT_MFG_ACCESS -#define CONFIG_CMD_CHARGER_ADC_AMON_BMON -#define CONFIG_HOSTCMD_PD_CONTROL - -/* SOC */ -#define CONFIG_CHIPSET_SKYLAKE -#define CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESET -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_CPU_PROCHOT_ACTIVE_LOW -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 - -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#define CONFIG_KEYBOARD_REFRESH_ROW3 - -/* Battery */ -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION" -#define CONFIG_BATTERY_LEVEL_NEAR_FULL 95 -#define CONFIG_BATTERY_HW_PRESENT_CUSTOM -#define CONFIG_BATTERY_PRESENT_CUSTOM -#define CONFIG_BATTERY_SMART -/* battery briefly requests V=0, A=0 when woken up */ -#define CONFIG_BATTERY_REQUESTS_NIL_WHEN_DEAD - -/* Charger */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGE_MANAGER_EXTERNAL_POWER_LIMIT -#define CONFIG_CHARGER -#define CONFIG_CHARGER_ISL9238 -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_PROFILE_OVERRIDE -#define CONFIG_CHARGER_PSYS -#define CONFIG_CHARGER_PSYS_READ -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30 -#define CONFIG_POWER_S0IX -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE -#define CONFIG_PWR_STATE_DISCHARGE_FULL - -/* LEDs */ -#define CONFIG_LED_COMMON -#define CONFIG_LED_PWM_ACTIVE_CHARGE_PORT_ONLY -#define CONFIG_LED_PWM_COUNT 2 -#undef CONFIG_LED_PWM_NEAR_FULL_COLOR -#define CONFIG_LED_PWM_NEAR_FULL_COLOR EC_LED_COLOR_WHITE - -/* Temperature Sensor */ -#define CONFIG_TEMP_SENSOR -#define CONFIG_TEMP_SENSOR_BD99992GW -#define CONFIG_THERMISTOR_NCP15WB - -/* Sensor */ -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_HOST_EVENT -#define CONFIG_ALS -#define CONFIG_ALS_OPT3001 -#define ALS_COUNT 1 -#define OPT3001_I2C_ADDR_FLAGS OPT3001_I2C_ADDR1_FLAGS -/* Enable sensor fifo, must also define the _SIZE and _THRES */ -#define CONFIG_ACCEL_FIFO -/* FIFO size is a power of 2. */ -#define CONFIG_ACCEL_FIFO_SIZE 1024 -/* Depends on how fast the AP boots and typical ODRs. */ -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) -#define CONFIG_ACCEL_INTERRUPTS - -/* USB */ -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_COMM_LOCKED -#define CONFIG_USB_PD_DISCHARGE -#define CONFIG_USB_PD_DISCHARGE_TCPC -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT TYPEC_RP_3A0 -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_VBUS_DETECT_TCPC -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_PS8751 -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TRY_SRC -#undef CONFIG_USB_PD_TRY_SRC_MIN_BATT_SOC -#define CONFIG_USB_PD_TRY_SRC_MIN_BATT_SOC 2 -#define CONFIG_USB_PD_VBUS_MEASURE_NOT_PRESENT -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV1 -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY /* FIXME: b/77151299 */ -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP - -/* Optional feature to configure npcx chip */ -#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ -#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ -#define NPCX_TACH_SEL2 0 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ -#define NPCX7_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */ -#define CONFIG_HIBERNATE_PSL /* Enable PSL pins for wakeup */ - -/* I2C ports */ -#define I2C_PORT_POWER NPCX_I2C_PORT0_0 /* pmic/charger */ -#define I2C_PORT_TCPC0 NPCX_I2C_PORT1_0 -#define I2C_PORT_TCPC1 NPCX_I2C_PORT2_0 -#define I2C_PORT_SENSOR NPCX_I2C_PORT3_0 /* als */ -#define I2C_PORT_BATTERY NPCX_I2C_PORT4_1 -#define I2C_PORT_GYRO NPCX_I2C_PORT5_0 /* accel/gyro */ - -#define I2C_PORT_ACCEL I2C_PORT_GYRO -#define I2C_PORT_CHARGER I2C_PORT_POWER -#define I2C_PORT_PMIC I2C_PORT_POWER -#define I2C_PORT_THERMAL I2C_PORT_POWER - -/* I2C addresses */ -#define I2C_ADDR_TCPC_FLAGS 0x0B -#define I2C_ADDR_MP2949_FLAGS 0x20 -#define I2C_ADDR_BD99992_FLAGS 0x30 - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -enum temp_sensor_id { - TEMP_SENSOR_BATTERY, /* BD99956GW TSENSE */ - TEMP_SENSOR_SYSTHERM0, /* BD99992GW SYSTHERM0 */ - TEMP_SENSOR_SYSTHERM1, /* BD99992GW SYSTHERM1 */ - TEMP_SENSOR_SYSTHERM2, /* BD99992GW SYSTHERM2 */ - TEMP_SENSOR_SYSTHERM3, /* BD99992GW SYSTHERM3 */ - TEMP_SENSOR_COUNT -}; - -enum pwm_channel { - PWM_CH_KBLIGHT, - PWM_CH_DB0_LED_BLUE, - PWM_CH_DB0_LED_RED, - PWM_CH_DB0_LED_GREEN, - PWM_CH_DB1_LED_BLUE, - PWM_CH_DB1_LED_RED, - PWM_CH_DB1_LED_GREEN, - PWM_CH_COUNT -}; - -enum sensor_id { - LID_ALS, - SENSOR_COUNT, -}; - -/* LID_ALS needs to be polled */ -#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ALS) - -enum adc_channel { - ADC_AMON_BMON, - ADC_PSYS, - ADC_CH_COUNT -}; - -/* - * delay to turn on the power supply max is ~16ms. - * delay to turn off the power supply max is about ~180ms. - */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* delay to turn on/off vconn */ - -/* Define typical operating power and max power */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 60000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 - -/* Board specific handlers */ -int board_get_version(void); -void board_reset_pd_mcu(void); - -#endif /* !__ASSEMBLER__ */ - -/* - * these are mappings from signal names used in the atlas schematics - * vs. names hard-coded in various parts of the EC codebase. - */ - -#define GPIO_AC_PRESENT GPIO_ROP_EC_ACOK -#define GPIO_BATTERY_PRESENT_L GPIO_EC_BATT_PRES_L -#define GPIO_BOARD_VERSION1 GPIO_EC_BRD_ID1 -#define GPIO_BOARD_VERSION2 GPIO_EC_BRD_ID2 -#define GPIO_BOARD_VERSION3 GPIO_EC_BRD_ID3 -#define GPIO_CPU_PROCHOT GPIO_EC_PROCHOT_ODL -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_KBD_KSO2 GPIO_EC_KB_ROW02_INV -#define GPIO_PCH_ACOK GPIO_EC_PCH_ACPRESENT -#define GPIO_PCH_PWRBTN_L GPIO_EC_PCH_PWR_BTN_L -#define GPIO_PCH_RSMRST_L GPIO_RSMRST_L -#define GPIO_PCH_SLP_SUS_L GPIO_SLP_SUS_L_PCH -#define GPIO_PCH_WAKE_L GPIO_EC_PCH_WAKE_L -#define GPIO_PMIC_DPWROK GPIO_ROP_DSW_PWROK_EC -#define GPIO_PMIC_SLP_SUS_L GPIO_SLP_SUS_L_PMIC -#define GPIO_POWER_BUTTON_L GPIO_MECH_PWR_BTN_ODL -#define GPIO_RSMRST_L_PGOOD GPIO_ROP_EC_RSMRST_L -#define GPIO_PCH_SLP_S0_L GPIO_SLP_S0_L -#define GPIO_USB_C0_5V_EN GPIO_EN_USB_C0_5V_OUT -#define GPIO_USB_C0_PD_RST_L GPIO_USB_PD_RST_L -#define GPIO_USB_C1_5V_EN GPIO_EN_USB_C1_5V_OUT -#define GPIO_USB_C1_PD_RST_L GPIO_USB_PD_RST_L -#define GPIO_WP_L GPIO_EC_WP_L - -/* ps8751 requires 1ms reset down assertion */ -#define PS8XXX_RST_L_RST_H_DELAY_MS 1 - -#define ATLAS_REV_FIXED_EC_WP 4 - -#endif /* __CROS_EC_BOARD_H */ |