diff options
Diffstat (limited to 'board/baklava/board.h')
| -rw-r--r-- | board/baklava/board.h | 98 |
1 files changed, 0 insertions, 98 deletions
diff --git a/board/baklava/board.h b/board/baklava/board.h deleted file mode 100644 index e061d2342d..0000000000 --- a/board/baklava/board.h +++ /dev/null @@ -1,98 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Baklava board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* Baseboard features */ -#include "baseboard.h" - -/* Optional features */ -/* - * For MP release, CONFIG_SYSTEM_UNLOCKED must be undefined, and - * CONFIG_FLASH_PSTATE_LOCKED must be defined in order to enable write protect - * using option bytes WRP registers. - */ -#define CONFIG_SYSTEM_UNLOCKED /* Allow dangerous commands while in dev. */ -#undef CONFIG_FLASH_PSTATE_LOCKED - -/* USB Type C and USB PD defines */ -#define USB_PD_PORT_HOST 0 -#define USB_PD_PORT_USB3 1 - -/* - * Only the host and display usbc ports are usb-pd capable. There is a 2nd usbc - * port, but this is type-c capable only. Only the PPC for this port needs to be - * controlled by FW. - */ -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_MUX_PS8822 - -#undef CONFIG_USB_VID -#define CONFIG_USB_VID 0x502 -#define CONFIG_USB_PID 0x1195 -#define CONFIG_USB_BCD_DEV 0x0001 /* v 0.01 */ -#define CONFIG_USB_PD_IDENTITY_HW_VERS 1 -#define CONFIG_USB_PD_IDENTITY_SW_VERS 1 - -/* I2C port names */ -#define I2C_PORT_I2C1 0 -#define I2C_PORT_I2C2 1 -#define I2C_PORT_I2C3 2 - -/* Required symbolic I2C port names */ -#define I2C_PORT_MP4245 I2C_PORT_I2C3 -#define I2C_PORT_EEPROM I2C_PORT_I2C3 -#define MP4245_I2C_ADDR_FLAGS MP4245_I2C_ADDR_0_FLAGS - -/* Include math_util for bitmask_uint64 used in pd_timers */ -#define CONFIG_MATH_UTIL - -#ifndef __ASSEMBLER__ - -#include "registers.h" - -#define GPIO_DP_HPD GPIO_DDI_MST_IN_HPD -#define GPIO_USBC_UF_ATTACHED_SRC GPIO_USBC_UF_MUX_VBUS_EN -#define GPIO_BPWR_DET GPIO_HUB_BPWRDET -#define GPIO_USB_HUB_OCP_NOTIFY GPIO_USBC_DATA_OCP_NOTIFY -#define GPIO_UFP_PLUG_DET GPIO_MST_UFP_PLUG_DET - -#define BUTTON_PRESSED_LEVEL 1 -#define BUTTON_RELEASED_LEVEL 0 - -#define GPIO_TRIGGER_1 GPIO_USB3_A5_CDP_EN -#define GPIO_TRIGGER_2 GPIO_USB3_A6_CDP_EN - -enum debug_gpio { - TRIGGER_1 = 0, - TRIGGER_2, -}; - -/* - * Function used to control GPIO signals as a timing marker. This is intended to - * be used for development/debugging purposes. - * - * @param trigger GPIO debug signal selection - * @param level desired level of the debug gpio signal - * @param pulse_usec pulse width if non-zero - */ -void board_debug_gpio(enum debug_gpio trigger, int level, int pulse_usec); - -/* - * Function called in power on case to enable usbc related interrupts - */ -void board_enable_usbc_interrupts(void); - -/* - * Function called in power off case to disable usbc related interrupts - */ -void board_disable_usbc_interrupts(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |