1 files changed, 0 insertions, 143 deletions
diff --git a/board/bobba/board.h b/board/bobba/board.h
deleted file mode 100644
index 129f84b1a8..0000000000
--- a/board/bobba/board.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Bobba board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* Select Baseboard features */
-#define VARIANT_OCTOPUS_EC_NPCX796FB
-#define VARIANT_OCTOPUS_CHARGER_ISL9238
-#include "baseboard.h"
-
-/* I2C bus configuraiton */
-#define I2C_PORT_ACCEL	I2C_PORT_SENSOR
-
-/* EC console commands  */
-#define CONFIG_CMD_ACCEL_INFO
-#undef CONFIG_CMD_ACCELSPOOF
-#undef CONFIG_CMD_MFALLOW
-
-/* Reduce flash space usage */
-#define CONFIG_DEBUG_ASSERT_BRIEF
-#define CONFIG_USB_PD_DEBUG_LEVEL 2
-
-#define CONFIG_LED_COMMON
-
-/*
- * Some bad battery which can report battery level correctly
- * but D-FET is disabled and can't be revived, so define reset
- * level to eable CL:1980406 function.
- */
-#define CONFIG_USB_PD_RESET_MIN_BATT_SOC 2
-
-/* Sensors */
-#define CONFIG_ACCEL_KX022	/* Lid accel */
-#define CONFIG_ACCELGYRO_BMI160	/* Base accel main source*/
-#define CONFIG_ACCELGYRO_ICM426XX	/* Base accel second source*/
-#define CONFIG_SYNC		/* Camera VSYNC */
-
-#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT
-/* Sensors without hardware FIFO are in forced mode */
-#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
-
-/* Motion Sense Task Events */
-#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define CONFIG_ACCELGYRO_ICM426XX_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-
-
-#define CONFIG_SYNC_INT_EVENT	\
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(VSYNC)
-
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_UPDATE
-#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-
-#define CONFIG_VOLUME_BUTTONS
-#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL
-#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL
-
-#define CONFIG_TEMP_SENSOR
-#define CONFIG_THERMISTOR
-#define CONFIG_STEINHART_HART_3V3_13K7_47K_4050B
-#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B
-
-/* Keyboard backliht */
-#define CONFIG_PWM
-#define CONFIG_PWM_KBLIGHT
-
-/* keypad */
-#define CONFIG_KEYBOARD_KEYPAD
-
-/* Additional PPC second source */
-#define CONFIG_USBC_PPC_SYV682X
-#define CONFIG_USBC_PPC_DEDICATED_INT
-#undef CONFIG_SYV682X_HV_ILIM
-#define CONFIG_SYV682X_HV_ILIM SYV682X_HV_ILIM_5_50
-/* SYV682 isn't connected to CC, so TCPC must provide VCONN */
-#define CONFIG_USBC_PPC_SYV682X_NO_CC
-
-#ifndef __ASSEMBLER__
-
-/* support factory keyboard test */
-#define CONFIG_KEYBOARD_FACTORY_TEST
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-enum adc_channel {
-	ADC_TEMP_SENSOR_AMB,		/* ADC0 */
-	ADC_TEMP_SENSOR_CHARGER,	/* ADC1 */
-	ADC_VBUS_C0,			/* ADC9 */
-	ADC_VBUS_C1,			/* ADC4 */
-	ADC_CH_COUNT
-};
-
-enum temp_sensor_id {
-	TEMP_SENSOR_BATTERY,
-	TEMP_SENSOR_AMBIENT,
-	TEMP_SENSOR_CHARGER,
-	TEMP_SENSOR_COUNT
-};
-
-enum pwm_channel {
-	PWM_CH_KBLIGHT,
-	PWM_CH_COUNT
-};
-
-/* Motion sensors */
-enum sensor_id {
-	LID_ACCEL,
-	BASE_ACCEL,
-	BASE_GYRO,
-	VSYNC,
-	SENSOR_COUNT
-};
-
-/* List of possible batteries */
-enum battery_type {
-	BATTERY_LGC15,
-	BATTERY_PANASONIC_AP15O5L,
-	BATTERY_SANYO,
-	BATTERY_SONY,
-	BATTERY_SMP_AP13J7K,
-	BATTERY_PANASONIC_AC15A3J,
-	BATTERY_LGC_AP18C8K,
-	BATTERY_MURATA_AP18C4K,
-	BATTERY_LGC_AP19A8K,
-	BATTERY_LGC_G023,
-	BATTERY_PANASONIC_AP19A5K,
-	BATTERY_TYPE_COUNT,
-};
-
-void motion_interrupt(enum gpio_signal signal);
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */