1 files changed, 0 insertions, 143 deletions
diff --git a/board/boten/board.h b/board/boten/board.h
deleted file mode 100644
index 0e2a72015c..0000000000
--- a/board/boten/board.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Boten board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* Select Baseboard features */
-#define VARIANT_DEDEDE_EC_IT8320
-#include "baseboard.h"
-
-/* Battery */
-#define CONFIG_BATTERY_FUEL_GAUGE
-#define CONFIG_BATTERY_V2
-#define CONFIG_BATTERY_COUNT 1
-#define CONFIG_HOSTCMD_BATTERY_V2
-
-/* BC 1.2 */
-#define CONFIG_BC12_DETECT_PI3USB9201
-
-/* Charger */
-#define CONFIG_CHARGE_RAMP_HW
-#define CONFIG_CHARGER_RAA489000
-#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10
-#define CONFIG_CHARGER_SENSE_RESISTOR 10
-#define CONFIG_OCPC_DEF_RBATT_MOHMS 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr */
-#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE
-#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (100 * MSEC)
-
-/* DAC for PSYS */
-#define CONFIG_DAC
-
-/* LED */
-#define CONFIG_LED_ONOFF_STATES
-
-/* PWM */
-#define CONFIG_PWM
-
-/* Sensors */
-#define CONFIG_ACCEL_LIS2DWL		/* Lid accel */
-#define CONFIG_ACCELGYRO_LSM6DSM	/* Base accel */
-#define CONFIG_ACCEL_LSM6DSM_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-/* Sensors without hardware FIFO are in forced mode */
-#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
-
-#define CONFIG_ACCEL_INTERRUPTS
-/* Enable sensor fifo, must also define the _SIZE and _THRES */
-#define CONFIG_ACCEL_FIFO
-/* Power of 2 - Too large of a fifo causes too much timestamp jitter */
-#define CONFIG_ACCEL_FIFO_SIZE 256
-#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3)
-
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_UPDATE
-#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-
-#define CONFIG_TABLET_MODE
-#define CONFIG_TABLET_MODE_SWITCH
-#define CONFIG_GMR_TABLET_MODE
-
-/* TCPC */
-#define CONFIG_USB_PD_PORT_MAX_COUNT 1
-#define CONFIG_USB_PD_TCPM_RAA489000
-
-/* USB defines specific to external TCPCs */
-#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
-#define CONFIG_USB_PD_VBUS_DETECT_TCPC
-#define CONFIG_USB_PD_DISCHARGE_TCPC
-#define CONFIG_USB_PD_TCPC_LOW_POWER
-
-/* EC console commands */
-#define CONFIG_CMD_TCPC_DUMP
-#define CONFIG_CMD_ACCELS
-#define CONFIG_CMD_ACCEL_INFO
-
-/* Variant references the TCPCs to determine Vbus sourcing */
-#define CONFIG_USB_PD_5V_EN_CUSTOM
-
-/* Thermistors */
-#define CONFIG_TEMP_SENSOR
-#define CONFIG_THERMISTOR
-#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B
-
-/* USB Mux */
-#define CONFIG_USB_MUX_IT5205
-
-/* USB Type A Features */
-#define USB_PORT_COUNT 1
-#define CONFIG_USB_PORT_POWER_DUMB
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-enum pwm_channel {
-	PWM_CH_KBLIGHT,
-	PWM_CH_LED_RED,
-	PWM_CH_LED_GREEN,
-	PWM_CH_LED_WHITE,
-	PWM_CH_COUNT,
-};
-
-/* Motion sensors */
-enum sensor_id {
-	LID_ACCEL,
-	BASE_ACCEL,
-	BASE_GYRO,
-	SENSOR_COUNT
-};
-
-/* ADC channels */
-enum adc_channel {
-	ADC_VSNS_PP3300_A,     /* ADC0 */
-	ADC_TEMP_SENSOR_1,     /* ADC2 */
-	ADC_TEMP_SENSOR_2,     /* ADC3 */
-	ADC_CH_COUNT
-};
-
-enum temp_sensor_id {
-	TEMP_SENSOR_1,
-	TEMP_SENSOR_2,
-	TEMP_SENSOR_COUNT
-};
-
-/* List of possible batteries */
-enum battery_type {
-	BATTERY_SMP,
-	BATTERY_LGC,
-	BATTERY_SUNWODA,
-	BATTERY_TYPE_COUNT,
-};
-
-void pen_detect_interrupt(enum gpio_signal s);
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */