1 files changed, 0 insertions, 117 deletions
diff --git a/board/careena/board.c b/board/careena/board.c
deleted file mode 100644
index ea2a886c03..0000000000
--- a/board/careena/board.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/* Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Careena board-specific configuration */
-
-#include "button.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "extpower.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "switch.h"
-#include "thermal.h"
-
-#include "gpio_list.h"
-
-const enum gpio_signal hibernate_wake_pins[] = {
-	GPIO_LID_OPEN,
-	GPIO_AC_PRESENT,
-	GPIO_POWER_BUTTON_L,
-	GPIO_EC_RST_ODL,
-};
-const int hibernate_wake_pins_used =  ARRAY_SIZE(hibernate_wake_pins);
-
-/* I2C port map. */
-const struct i2c_port_t i2c_ports[] = {
-	{"power",   I2C_PORT_POWER,   100, GPIO_I2C0_SCL, GPIO_I2C0_SDA},
-	{"tcpc0",   I2C_PORT_TCPC0,   400, GPIO_I2C1_SCL, GPIO_I2C1_SDA},
-	{"tcpc1",   I2C_PORT_TCPC1,   400, GPIO_I2C2_SCL, GPIO_I2C2_SDA},
-	{"thermal", I2C_PORT_THERMAL_AP, 400, GPIO_I2C3_SCL, GPIO_I2C3_SDA},
-	{"sensor",  I2C_PORT_SENSOR,  400, GPIO_I2C7_SCL, GPIO_I2C7_SDA},
-};
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_KBLIGHT] = {
-		.channel = 5,
-		.flags = PWM_CONFIG_DSLEEP,
-		.freq = 100,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT] = {
-	[TEMP_SENSOR_SOC] = {
-		.temp_host = {
-			[EC_TEMP_THRESH_WARN] = 0,
-			[EC_TEMP_THRESH_HIGH] = C_TO_K(74),
-			[EC_TEMP_THRESH_HALT] = C_TO_K(79),
-		},
-		.temp_host_release = {
-			[EC_TEMP_THRESH_WARN] = 0,
-			[EC_TEMP_THRESH_HIGH] = C_TO_K(71),
-			[EC_TEMP_THRESH_HALT] = 0,
-		},
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
-
-static void board_init(void)
-{
-	/*
-	 * Ensure PROCHOT is deasserted after sysjump.
-	 * The GPIO was an input in old RO images. On sysjump to new RW, the
-	 * direction is changed to output but the level is not set, which
-	 * results in the output driving low, which asserts PROCHOT incorrectly.
-	 * (crbug.com/1226694)
-	 */
-	gpio_set_level(GPIO_CPU_PROCHOT, 1);
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-#ifdef CONFIG_KEYBOARD_FACTORY_TEST
-/*
- * We have total 24 pins for keyboard connecter, {-1, -1} mean
- * the N/A pin that don't consider it and reserve index 0 area
- * that we don't have pin 0.
- */
-const int keyboard_factory_scan_pins[][2] = {
-		{-1, -1}, {0, 5}, {1, 1}, {1, 0}, {0, 6},
-		{0, 7}, {1, 4}, {1, 3}, {1, 6}, {-1, -1},
-		{3, 1}, {2, 0}, {1, 5}, {2, 6}, {-1, -1},
-		{2, 1}, {2, 4}, {2, 5}, {1, 2}, {2, 3},
-		{2, 2}, {3, 0}, {-1, -1}, {-1, -1}, {-1, -1},
-};
-
-const int keyboard_factory_scan_pins_used =
-			ARRAY_SIZE(keyboard_factory_scan_pins);
-
-static int board_is_support_ps8755_tcpc(void)
-{
-	/*
-	 * 0: PS8751
-	 * 1: PS8755
-	 */
-	return gpio_get_level(GPIO_TCPC_ID);
-}
-
-__override uint16_t board_get_ps8xxx_product_id(int port)
-{
-	/* Careena variant doesn't have ps8xxx product in the port 0 */
-	if (port == 0)
-		return 0;
-
-	if (board_is_support_ps8755_tcpc())
-		return PS8755_PRODUCT_ID;
-
-	return PS8751_PRODUCT_ID;
-}
-#endif