diff options
Diffstat (limited to 'board/coffeecake/board.h')
| -rw-r--r-- | board/coffeecake/board.h | 143 |
1 files changed, 0 insertions, 143 deletions
diff --git a/board/coffeecake/board.h b/board/coffeecake/board.h deleted file mode 100644 index d655466a14..0000000000 --- a/board/coffeecake/board.h +++ /dev/null @@ -1,143 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Coffee cake configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* Free up flash space */ -#define CONFIG_LTO - -/* 48 MHz SYSCLK clock frequency */ -#define CPU_CLOCK 48000000 - -/* the UART console is on USART1 (PA9/PA10) */ -#define CONFIG_UART_CONSOLE 1 - -/* Optional features */ -#define CONFIG_STM_HWTIMER32 -#define CONFIG_ADC -#define CONFIG_BOARD_PRE_INIT -#define CONFIG_CMD_CHARGER -#define CONFIG_CMD_GPIO_EXTENDED -#define CONFIG_CMD_SPI_FLASH -#define CONFIG_CHARGER_SY21612 -#define CONFIG_HW_CRC -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_RSA -#define CONFIG_RWSIG -#define CONFIG_RWSIG_TYPE_USBPD1 -#define CONFIG_SHA256 -/* TODO(tbroch) Re-enable once STM spi master can be inhibited at boot so it - doesn't interfere with HDMI loading its f/w */ -#undef CONFIG_SPI_FLASH -#define CONFIG_SPI_CS_GPIO GPIO_PD_MCDP_SPI_CS_L -#define CONFIG_USB -#define CONFIG_USB_BOS -#define CONFIG_USB_INHIBIT_CONNECT -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV1 -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_HW_DEV_ID_BOARD_MAJOR USB_PD_HW_DEV_ID_HOHO -#define CONFIG_USB_PD_HW_DEV_ID_BOARD_MINOR 2 -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_FLASH -#define CONFIG_USB_PD_INTERNAL_COMP -#define CONFIG_USB_PD_IDENTITY_HW_VERS 1 -#define CONFIG_USB_PD_IDENTITY_SW_VERS 1 -#define CONFIG_USB_PD_LOGGING -#undef CONFIG_EVENT_LOG_SIZE -#define CONFIG_EVENT_LOG_SIZE 256 -#define CONFIG_USB_PD_CUSTOM_PDO -#define CONFIG_USB_PD_PORT_MAX_COUNT 1 -#define CONFIG_USB_PD_TCPC -#define CONFIG_USB_PD_TCPM_STUB -#define CONFIG_USB_PD_VBUS_DETECT_NONE -/* mcdp2850 serial interface */ -#define CONFIG_MCDP28X0 usart3_hw -#define CONFIG_STREAM_USART -#define CONFIG_STREAM_USART3 -#undef CONFIG_WATCHDOG_HELP -#undef CONFIG_LID_SWITCH -#undef CONFIG_TASK_PROFILING - -/* USB configuration */ -#define CONFIG_USB_PID 0x502f -#define CONFIG_USB_BCD_DEV 0x0001 /* v 0.01 */ - -/* No Write-protect GPIO, force the write-protection */ -#define CONFIG_WP_ALWAYS -#define CONFIG_FLASH_READOUT_PROTECTION - -/* Inform VIF generator that this board is an Alt Mode Adapter */ -#define CONFIG_USB_ALT_MODE_ADAPTER - -#ifndef __ASSEMBLER__ - -/* Timer selection */ -#define TIM_CLOCK32 2 -#define TIM_ADC 3 - -#include "gpio_signal.h" - -/* ADC signal */ -enum adc_channel { - ADC_CH_CC1_PD = 0, - ADC_VBUS_MON, - ADC_DAC_REF_TP28, - ADC_DAC_VOLT, - /* Number of ADC channels */ - ADC_CH_COUNT -}; - -/* USB string indexes */ -enum usb_strings { - USB_STR_DESC = 0, - USB_STR_VENDOR, - USB_STR_PRODUCT, - USB_STR_VERSION, - USB_STR_BB_URL, - - USB_STR_COUNT -}; - -/* 3.0A Rp */ -#define PD_SRC_VNC PD_SRC_3_0_VNC_MV -#define PD_SRC_RD_THRESHOLD PD_SRC_3_0_RD_THRESH_MV - -/* delay necessary for the voltage transition on the power supply */ -/* TODO (code.google.com/p/chrome-os-partner/issues/detail?id=37078) - * Need to measure these and adjust for honeybuns. - */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 50000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 50000 /* us */ - -/* Define typical operating power and max power */ -#define PD_OPERATING_POWER_MW 1000 -#define PD_MAX_POWER_MW 22500 -#define PD_MAX_CURRENT_MA 2500 -#define PD_MAX_VOLTAGE_MV 9000 - -/* Board interfaces */ -void board_set_usb_output_voltage(int mv); - -#endif /* !__ASSEMBLER__ */ - -/* USB Device class */ -#define USB_DEV_CLASS USB_CLASS_BILLBOARD - -/* USB interface indexes (use define rather than enum to expand them) */ -#define USB_IFACE_COUNT 0 - -/* USB endpoint indexes (use define rather than enum to expand them) */ -#define USB_EP_CONTROL 0 -#define USB_EP_COUNT 1 - -/* I2C ports */ -#define I2C_PORT_SY21612 0 - -#endif /* __CROS_EC_BOARD_H */ |