diff options
Diffstat (limited to 'board/coral/board.h')
| -rw-r--r-- | board/coral/board.h | 61 |
1 files changed, 30 insertions, 31 deletions
diff --git a/board/coral/board.h b/board/coral/board.h index 4a1709e7a9..bc6226152c 100644 --- a/board/coral/board.h +++ b/board/coral/board.h @@ -1,4 +1,4 @@ -/* Copyright 2016 The Chromium OS Authors. All rights reserved. +/* Copyright 2016 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -12,7 +12,7 @@ * By default, enable all console messages except Events: * The sensor stack is generating a lot of activity. */ -#define CC_DEFAULT (CC_ALL & ~CC_MASK(CC_EVENTS)) +#define CC_DEFAULT (CC_ALL & ~CC_MASK(CC_EVENTS)) #undef CONFIG_HOSTCMD_DEBUG_MODE #define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF @@ -23,14 +23,14 @@ #define CONFIG_CMD_ACCEL_INFO #define CONFIG_CMD_BATT_MFG_ACCESS #define CONFIG_CMD_CHARGER_ADC_AMON_BMON -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 +#define CONFIG_CHARGER_SENSE_RESISTOR 10 +#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 #define BD9995X_IOUT_GAIN_SELECT \ - BD9995X_CMD_PMON_IOUT_CTRL_SET_IOUT_GAIN_SET_20V + BD9995X_CMD_PMON_IOUT_CTRL_SET_IOUT_GAIN_SET_20V #define CONFIG_CHARGER_PSYS_READ #define BD9995X_PSYS_GAIN_SELECT \ - BD9995X_CMD_PMON_IOUT_CTRL_SET_PMON_GAIN_SET_02UAW + BD9995X_CMD_PMON_IOUT_CTRL_SET_PMON_GAIN_SET_02UAW #define CONFIG_CMD_I2C_STRESS_TEST #define CONFIG_CMD_I2C_STRESS_TEST_ACCEL @@ -44,7 +44,7 @@ #define CONFIG_PORT80_HISTORY_LEN 256 /* Battery */ -#define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION" +#define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION" #define CONFIG_BATTERY_CUT_OFF #define CONFIG_BATTERY_HW_PRESENT_CUSTOM #define CONFIG_BATTERY_LEVEL_NEAR_FULL 94 @@ -90,7 +90,7 @@ #define CONFIG_USB_PD_PORT_MAX_COUNT 2 #define CONFIG_USB_PD_VBUS_DETECT_CHARGER #define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_TCPM_MUX /* for both PS8751 and ANX3429 */ +#define CONFIG_USB_PD_TCPM_MUX /* for both PS8751 and ANX3429 */ #define CONFIG_USB_PD_TCPM_ANX3429 #define CONFIG_USB_PD_TCPM_PS8751 #define CONFIG_USB_PD_TCPM_TCPCI @@ -117,11 +117,11 @@ /* EC */ #define CONFIG_ADC #define CONFIG_EXTPOWER_GPIO -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 +#undef CONFIG_EXTPOWER_DEBOUNCE_MS +#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 #define CONFIG_FPU /* Region sizes are not a power of 2 so we can't use MPU */ -#undef CONFIG_MPU +#undef CONFIG_MPU #define CONFIG_HOSTCMD_FLASH_SPI_INFO #define CONFIG_I2C #define CONFIG_I2C_CONTROLLER @@ -150,7 +150,7 @@ #define CONFIG_WIRELESS #define CONFIG_WIRELESS_SUSPEND EC_WIRELESS_SWITCH_WLAN_POWER #define CONFIG_WLAN_POWER_ACTIVE_LOW -#define WIRELESS_GPIO_WLAN_POWER GPIO_WIRELESS_GPIO_WLAN_POWER +#define WIRELESS_GPIO_WLAN_POWER GPIO_WIRELESS_GPIO_WLAN_POWER #define CONFIG_PWR_STATE_DISCHARGE_FULL /* @@ -168,7 +168,7 @@ #define CONFIG_FLASH_SIZE_BYTES 524288 #define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25Q40 /* FIXME: Should be GD25LQ40? */ +#define CONFIG_SPI_FLASH_W25Q40 /* FIXME: Should be GD25LQ40? */ /* * Enable 1 slot of secure temporary storage to support @@ -178,19 +178,19 @@ #define CONFIG_VSTORE_SLOT_COUNT 1 /* Optional feature - used by nuvoton */ -#define NPCX_UART_MODULE2 1 /* 0:GPIO10/11 1:GPIO64/65 as UART */ -#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 1:GPIOD5/E2/D4/E5 as JTAG*/ +#define NPCX_UART_MODULE2 1 /* 0:GPIO10/11 1:GPIO64/65 as UART */ +#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 1:GPIOD5/E2/D4/E5 as JTAG*/ /* FIXME(dhendrix): these pins are just normal GPIOs on Coral. Do we need * to change some other setting to put them in GPIO mode? */ -#define NPCX_TACH_SEL2 0 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ +#define NPCX_TACH_SEL2 0 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ /* I2C ports */ -#define I2C_PORT_GYRO NPCX_I2C_PORT1 -#define I2C_PORT_LID_ACCEL NPCX_I2C_PORT2 -#define I2C_PORT_BATTERY NPCX_I2C_PORT3 -#define I2C_PORT_CHARGER NPCX_I2C_PORT3 +#define I2C_PORT_GYRO NPCX_I2C_PORT1 +#define I2C_PORT_LID_ACCEL NPCX_I2C_PORT2 +#define I2C_PORT_BATTERY NPCX_I2C_PORT3 +#define I2C_PORT_CHARGER NPCX_I2C_PORT3 /* Accelerometer and Gyroscope are the same device. */ -#define I2C_PORT_ACCEL I2C_PORT_GYRO +#define I2C_PORT_ACCEL I2C_PORT_GYRO /* Sensors */ #define CONFIG_MKBP_EVENT @@ -213,7 +213,6 @@ /* Depends on how fast the AP boots and typical ODRs */ #define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) - #ifndef __ASSEMBLER__ #include "gpio_signal.h" @@ -221,11 +220,11 @@ /* ADC signal */ enum adc_channel { - ADC_TEMP_SENSOR_CHARGER, /* ADC0 */ - ADC_TEMP_SENSOR_AMB, /* ADC1 */ - ADC_BOARD_ID, /* ADC2 */ - ADC_BOARD_SKU_1, /* ADC3 */ - ADC_BOARD_SKU_0, /* ADC4 */ + ADC_TEMP_SENSOR_CHARGER, /* ADC0 */ + ADC_TEMP_SENSOR_AMB, /* ADC1 */ + ADC_BOARD_ID, /* ADC2 */ + ADC_BOARD_SKU_1, /* ADC3 */ + ADC_BOARD_SKU_0, /* ADC4 */ ADC_CH_COUNT }; @@ -283,16 +282,16 @@ enum coral_board_version { * delay to turn on the power supply max is ~16ms. * delay to turn off the power supply max is about ~180ms. */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ +#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ #define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ /* delay to turn on/off vconn */ /* Define typical operating power and max power */ #define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 45000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 +#define PD_MAX_POWER_MW 45000 +#define PD_MAX_CURRENT_MA 3000 +#define PD_MAX_VOLTAGE_MV 20000 /* Reset PD MCU */ void board_reset_pd_mcu(void); |