diff options
Diffstat (limited to 'board/corori/board.c')
| -rw-r--r-- | board/corori/board.c | 128 |
1 files changed, 58 insertions, 70 deletions
diff --git a/board/corori/board.c b/board/corori/board.c index 3453fccef4..4fe1e01fec 100644 --- a/board/corori/board.c +++ b/board/corori/board.c @@ -1,4 +1,4 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. +/* Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -40,14 +40,13 @@ #include "usb_pd.h" #include "usb_pd_tcpm.h" -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) +#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ##args) +#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ##args) #define INT_RECHECK_US 5000 -#define ADC_VOL_UP_MASK BIT(0) -#define ADC_VOL_DOWN_MASK BIT(1) - +#define ADC_VOL_UP_MASK BIT(0) +#define ADC_VOL_DOWN_MASK BIT(1) /******************************************************************************/ /* USB-A Configuration */ @@ -73,8 +72,8 @@ static const struct ec_response_keybd_config corori_keybd = { /* No function keys, no numeric keypad, no screenlock key */ }; -__override const struct ec_response_keybd_config -*board_vivaldi_keybd_config(void) +__override const struct ec_response_keybd_config * +board_vivaldi_keybd_config(void) { return &corori_keybd; } @@ -115,7 +114,6 @@ static void usb_c0_interrupt(enum gpio_signal s) /* Check the line again in 5ms */ hook_call_deferred(&check_c0_line_data, INT_RECHECK_US); - } static void c0_ccsbu_ovp_interrupt(enum gpio_signal s) @@ -154,22 +152,22 @@ BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); /* Thermistors */ const struct temp_sensor_t temp_sensors[] = { - [TEMP_SENSOR_1] = {.name = "Memory", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_51k1_47k_4050b, - .idx = ADC_TEMP_SENSOR_1}, - [TEMP_SENSOR_2] = {.name = "Charger", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_51k1_47k_4050b, - .idx = ADC_TEMP_SENSOR_2}, + [TEMP_SENSOR_1] = { .name = "Memory", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_51k1_47k_4050b, + .idx = ADC_TEMP_SENSOR_1 }, + [TEMP_SENSOR_2] = { .name = "Charger", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_51k1_47k_4050b, + .idx = ADC_TEMP_SENSOR_2 }, }; BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); /* * TODO(b/202062363): Remove when clang is fixed. */ -#define THERMAL_A \ - { \ +#define THERMAL_A \ + { \ .temp_host = { \ [EC_TEMP_THRESH_WARN] = 0, \ [EC_TEMP_THRESH_HIGH] = C_TO_K(70), \ @@ -186,8 +184,8 @@ __maybe_unused static const struct ec_thermal_config thermal_a = THERMAL_A; /* * TODO(b/202062363): Remove when clang is fixed. */ -#define THERMAL_B \ - { \ +#define THERMAL_B \ + { \ .temp_host = { \ [EC_TEMP_THRESH_WARN] = 0, \ [EC_TEMP_THRESH_HIGH] = C_TO_K(73), \ @@ -249,13 +247,11 @@ int board_is_sourcing_vbus(int port) tcpc_read(port, TCPC_REG_POWER_STATUS, ®val); return !!(regval & TCPC_REG_POWER_STATUS_SOURCING_VBUS); - } int board_set_active_charge_port(int port) { - int is_real_port = (port >= 0 && - port < CONFIG_USB_PD_PORT_MAX_COUNT); + int is_real_port = (port >= 0 && port < CONFIG_USB_PD_PORT_MAX_COUNT); int i; int old_port; @@ -315,8 +311,8 @@ int board_set_active_charge_port(int port) return EC_SUCCESS; } -void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) +void board_set_charge_limit(int port, int supplier, int charge_ma, int max_ma, + int charge_mv) { int icl = MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT); @@ -353,9 +349,8 @@ void board_init(void) } DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); -__override void ocpc_get_pid_constants(int *kp, int *kp_div, - int *ki, int *ki_div, - int *kd, int *kd_div) +__override void ocpc_get_pid_constants(int *kp, int *kp_div, int *ki, + int *ki_div, int *kd, int *kd_div) { *kp = 1; *kp_div = 20; @@ -399,12 +394,15 @@ const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { }, }; -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { +const struct usb_mux_chain usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { { - .usb_port = 0, - .i2c_port = I2C_PORT_USB_C0, - .i2c_addr_flags = PI3USB3X532_I2C_ADDR0, - .driver = &pi3usb3x532_usb_mux_driver, + .mux = + &(const struct usb_mux){ + .usb_port = 0, + .i2c_port = I2C_PORT_USB_C0, + .i2c_addr_flags = PI3USB3X532_I2C_ADDR0, + .driver = &pi3usb3x532_usb_mux_driver, + }, }, }; @@ -446,46 +444,36 @@ static void board_extpower(void) DECLARE_HOOK(HOOK_AC_CHANGE, board_extpower, HOOK_PRIO_DEFAULT); const struct i2c_port_t i2c_ports[] = { - { - .name = "eeprom", - .port = I2C_PORT_EEPROM, - .kbps = 400, - .scl = GPIO_EC_I2C_EEPROM_SCL, - .sda = GPIO_EC_I2C_EEPROM_SDA - }, - - { - .name = "battery", - .port = I2C_PORT_BATTERY, - .kbps = 100, - .scl = GPIO_EC_I2C_BATTERY_SCL, - .sda = GPIO_EC_I2C_BATTERY_SDA - }, + { .name = "eeprom", + .port = I2C_PORT_EEPROM, + .kbps = 400, + .scl = GPIO_EC_I2C_EEPROM_SCL, + .sda = GPIO_EC_I2C_EEPROM_SDA }, + + { .name = "battery", + .port = I2C_PORT_BATTERY, + .kbps = 100, + .scl = GPIO_EC_I2C_BATTERY_SCL, + .sda = GPIO_EC_I2C_BATTERY_SDA }, #ifdef HAS_TASK_MOTIONSENSE - { - .name = "sensor", - .port = I2C_PORT_SENSOR, - .kbps = 400, - .scl = GPIO_EC_I2C_SENSOR_SCL, - .sda = GPIO_EC_I2C_SENSOR_SDA - }, + { .name = "sensor", + .port = I2C_PORT_SENSOR, + .kbps = 400, + .scl = GPIO_EC_I2C_SENSOR_SCL, + .sda = GPIO_EC_I2C_SENSOR_SDA }, #endif - { - .name = "usbc0", - .port = I2C_PORT_USB_C0, - .kbps = 1000, - .scl = GPIO_EC_I2C_USB_C0_SCL, - .sda = GPIO_EC_I2C_USB_C0_SDA - }, + { .name = "usbc0", + .port = I2C_PORT_USB_C0, + .kbps = 1000, + .scl = GPIO_EC_I2C_USB_C0_SCL, + .sda = GPIO_EC_I2C_USB_C0_SDA }, #if CONFIG_USB_PD_PORT_MAX_COUNT > 1 - { - .name = "sub_usbc1", - .port = I2C_PORT_SUB_USB_C1, - .kbps = 1000, - .scl = GPIO_EC_I2C_SUB_USB_C1_SCL, - .sda = GPIO_EC_I2C_SUB_USB_C1_SDA - }, + { .name = "sub_usbc1", + .port = I2C_PORT_SUB_USB_C1, + .kbps = 1000, + .scl = GPIO_EC_I2C_SUB_USB_C1_SCL, + .sda = GPIO_EC_I2C_SUB_USB_C1_SDA }, #endif }; |