summaryrefslogtreecommitdiff
path: root/board/corori/board.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/corori/board.c')
-rw-r--r--board/corori/board.c488
1 files changed, 0 insertions, 488 deletions
diff --git a/board/corori/board.c b/board/corori/board.c
deleted file mode 100644
index 323a5a8d71..0000000000
--- a/board/corori/board.c
+++ /dev/null
@@ -1,488 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Lalala board-specific configuration */
-
-#include "adc_chip.h"
-#include "button.h"
-#include "cbi_fw_config.h"
-#include "cbi_ssfc.h"
-#include "cbi_fw_config.h"
-#include "charge_manager.h"
-#include "charge_state_v2.h"
-#include "charger.h"
-#include "chipset.h"
-#include "common.h"
-#include "compile_time_macros.h"
-#include "driver/temp_sensor/thermistor.h"
-#include "temp_sensor.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/charger/isl923x.h"
-#include "driver/tcpm/raa489000.h"
-#include "driver/tcpm/tcpci.h"
-#include "driver/usb_mux/pi3usb3x532.h"
-#include "extpower.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "keyboard_config.h"
-#include "keyboard_raw.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "stdbool.h"
-#include "switch.h"
-#include "system.h"
-#include "task.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usb_pd_tcpm.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-#define INT_RECHECK_US 5000
-
-#define ADC_VOL_UP_MASK BIT(0)
-#define ADC_VOL_DOWN_MASK BIT(1)
-
-
-/******************************************************************************/
-/* USB-A Configuration */
-const int usb_port_enable[USB_PORT_COUNT] = {
- GPIO_EN_USB_A0_VBUS,
-};
-
-/* Keyboard scan setting */
-__override struct keyboard_scan_config keyscan_config = {
- /*
- * F3 key scan cycle completed but scan input is not
- * charging to logic high when EC start scan next
- * column for "T" key, so we set .output_settle_us
- * to 80us from 50us.
- */
- .output_settle_us = 80,
- .debounce_down_us = 9 * MSEC,
- .debounce_up_us = 30 * MSEC,
- .scan_period_us = 3 * MSEC,
- .min_post_scan_delay_us = 1000,
- .poll_timeout_us = 100 * MSEC,
- .actual_key_mask = {
- 0x1c, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
- 0xa4, 0xff, 0xfe, 0x55, 0xfe, 0xff, 0xff, 0xff, /* full set */
- },
-};
-
-static const struct ec_response_keybd_config lalala_keybd = {
- /* Default Chromeos keyboard config */
- .num_top_row_keys = 10,
- .action_keys = {
- TK_BACK, /* T1 */
- TK_FORWARD, /* T2 */
- TK_REFRESH, /* T3 */
- TK_FULLSCREEN, /* T4 */
- TK_OVERVIEW, /* T5 */
- TK_BRIGHTNESS_DOWN, /* T6 */
- TK_BRIGHTNESS_UP, /* T7 */
- TK_VOL_MUTE, /* T8 */
- TK_VOL_DOWN, /* T9 */
- TK_VOL_UP, /* T10 */
- },
- /* No function keys, no numeric keypad, has screenlock key */
- .capabilities = KEYBD_CAP_SCRNLOCK_KEY,
-};
-
-__override const struct ec_response_keybd_config
-*board_vivaldi_keybd_config(void)
-{
- return &lalala_keybd;
-}
-
-/* C0 interrupt line shared by BC 1.2 and charger */
-static void check_c0_line(void);
-DECLARE_DEFERRED(check_c0_line);
-
-static void notify_c0_chips(void)
-{
- /*
- * The interrupt line is shared between the TCPC and BC 1.2 detection
- * chip. Therefore we'll need to check both ICs.
- */
- schedule_deferred_pd_interrupt(0);
- task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-}
-
-static void check_c0_line(void)
-{
- /*
- * If line is still being held low, see if there's more to process from
- * one of the chips
- */
- if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
- notify_c0_chips();
- hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
- }
-}
-
-static void usb_c0_interrupt(enum gpio_signal s)
-{
- /* Cancel any previous calls to check the interrupt line */
- hook_call_deferred(&check_c0_line_data, -1);
-
- /* Notify all chips using this line that an interrupt came in */
- notify_c0_chips();
-
- /* Check the line again in 5ms */
- hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
-
-}
-
-static void c0_ccsbu_ovp_interrupt(enum gpio_signal s)
-{
- cprints(CC_USBPD, "C0: CC OVP, SBU OVP, or thermal event");
- pd_handle_cc_overvoltage(0);
-}
-
-#include "gpio_list.h"
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
- [ADC_TEMP_SENSOR_1] = {
- .name = "TEMP_SENSOR1",
- .input_ch = NPCX_ADC_CH0,
- .factor_mul = ADC_MAX_VOLT,
- .factor_div = ADC_READ_MAX + 1,
- .shift = 0,
- },
- [ADC_TEMP_SENSOR_2] = {
- .name = "TEMP_SENSOR2",
- .input_ch = NPCX_ADC_CH1,
- .factor_mul = ADC_MAX_VOLT,
- .factor_div = ADC_READ_MAX + 1,
- .shift = 0,
- },
- [ADC_VSNS_PP3300_A] = {
- .name = "PP3300_A_PGOOD",
- .input_ch = NPCX_ADC_CH9,
- .factor_mul = ADC_MAX_VOLT,
- .factor_div = ADC_READ_MAX + 1,
- .shift = 0,
- },
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/* Thermistors */
-const struct temp_sensor_t temp_sensors[] = {
- [TEMP_SENSOR_1] = {.name = "Memory",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = get_temp_3v3_51k1_47k_4050b,
- .idx = ADC_TEMP_SENSOR_1},
- [TEMP_SENSOR_2] = {.name = "Charger",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = get_temp_3v3_51k1_47k_4050b,
- .idx = ADC_TEMP_SENSOR_2},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-const static struct ec_thermal_config thermal_a = {
- .temp_host = {
- [EC_TEMP_THRESH_WARN] = 0,
- [EC_TEMP_THRESH_HIGH] = C_TO_K(70),
- [EC_TEMP_THRESH_HALT] = C_TO_K(85),
- },
- .temp_host_release = {
- [EC_TEMP_THRESH_WARN] = 0,
- [EC_TEMP_THRESH_HIGH] = C_TO_K(65),
- [EC_TEMP_THRESH_HALT] = 0,
- },
-};
-
-const static struct ec_thermal_config thermal_b = {
- .temp_host = {
- [EC_TEMP_THRESH_WARN] = 0,
- [EC_TEMP_THRESH_HIGH] = C_TO_K(73),
- [EC_TEMP_THRESH_HALT] = C_TO_K(85),
- },
- .temp_host_release = {
- [EC_TEMP_THRESH_WARN] = 0,
- [EC_TEMP_THRESH_HIGH] = C_TO_K(65),
- [EC_TEMP_THRESH_HALT] = 0,
- },
-};
-
-struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT];
-
-static void setup_thermal(void)
-{
- thermal_params[TEMP_SENSOR_1] = thermal_a;
- thermal_params[TEMP_SENSOR_2] = thermal_b;
-}
-
-void board_hibernate(void)
-{
- /*
- * Both charger ICs need to be put into their "low power mode" before
- * entering the Z-state.
- */
- raa489000_hibernate(1, true);
- raa489000_hibernate(0, true);
-}
-
-void board_reset_pd_mcu(void)
-{
- /*
- * TODO(b:147316511): Here we could issue a digital reset to the IC,
- * unsure if we actually want to do that or not yet.
- */
-}
-
-static void set_5v_gpio(int level)
-{
- gpio_set_level(GPIO_EN_PP5000, level);
- gpio_set_level(GPIO_EN_USB_A0_VBUS, level);
-}
-
-__override void board_power_5v_enable(int enable)
-{
- /*
- * Port 0 simply has a GPIO to turn on the 5V regulator, however, 5V is
- * generated locally on the sub board and we need to set the comparator
- * polarity on the sub board charger IC.
- */
- set_5v_gpio(!!enable);
-}
-
-int board_is_sourcing_vbus(int port)
-{
- int regval;
-
- tcpc_read(port, TCPC_REG_POWER_STATUS, &regval);
- return !!(regval & TCPC_REG_POWER_STATUS_SOURCING_VBUS);
-
-}
-
-int board_set_active_charge_port(int port)
-{
- int is_real_port = (port >= 0 &&
- port < CONFIG_USB_PD_PORT_MAX_COUNT);
- int i;
- int old_port;
-
- if (!is_real_port && port != CHARGE_PORT_NONE)
- return EC_ERROR_INVAL;
-
- old_port = charge_manager_get_active_charge_port();
-
- CPRINTS("New chg p%d", port);
-
- /* Disable all ports. */
- if (port == CHARGE_PORT_NONE) {
- for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++)
- tcpc_write(i, TCPC_REG_COMMAND,
- TCPC_REG_COMMAND_SNK_CTRL_LOW);
-
- return EC_SUCCESS;
- }
-
- /* Check if port is sourcing VBUS. */
- if (board_is_sourcing_vbus(port)) {
- CPRINTS("Skip enable p%d", port);
- return EC_ERROR_INVAL;
- }
-
- /*
- * Turn off the other ports' sink path FETs, before enabling the
- * requested charge port.
- */
- for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) {
- if (i == port)
- continue;
-
- if (tcpc_write(i, TCPC_REG_COMMAND,
- TCPC_REG_COMMAND_SNK_CTRL_LOW))
- CPRINTS("p%d: sink path disable failed.", i);
- }
-
- /*
- * Stop the charger IC from switching while changing ports. Otherwise,
- * we can overcurrent the adapter we're switching to. (crbug.com/926056)
- */
- if (old_port != CHARGE_PORT_NONE)
- charger_discharge_on_ac(1);
-
- /* Enable requested charge port. */
- if (tcpc_write(port, TCPC_REG_COMMAND,
- TCPC_REG_COMMAND_SNK_CTRL_HIGH)) {
- CPRINTS("p%d: sink path enable failed.", port);
- charger_discharge_on_ac(0);
- return EC_ERROR_UNKNOWN;
- }
-
- /* Allow the charger IC to begin/continue switching. */
- charger_discharge_on_ac(0);
-
- return EC_SUCCESS;
-}
-
-void board_set_charge_limit(int port, int supplier, int charge_ma,
- int max_ma, int charge_mv)
-{
- int icl = MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT);
-
- /*
- * b/147463641: The charger IC seems to overdraw ~4%, therefore we
- * reduce our target accordingly.
- */
- icl = icl * 96 / 100;
- charge_set_input_current_limit(icl, charge_mv);
-}
-
-__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp)
-{
- if (port < 0 || port > board_get_usb_pd_port_count())
- return;
-
- raa489000_set_output_current(port, rp);
-}
-
-void board_init(void)
-{
- int on;
-
- gpio_enable_interrupt(GPIO_USB_C0_INT_ODL);
- check_c0_line();
-
- /* Turn on 5V if the system is on, otherwise turn it off. */
- on = chipset_in_state(CHIPSET_STATE_ON | CHIPSET_STATE_ANY_SUSPEND |
- CHIPSET_STATE_SOFT_OFF);
- board_power_5v_enable(on);
-
- /* Initialize THERMAL */
- setup_thermal();
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-__override void ocpc_get_pid_constants(int *kp, int *kp_div,
- int *ki, int *ki_div,
- int *kd, int *kd_div)
-{
- *kp = 1;
- *kp_div = 20;
- *ki = 1;
- *ki_div = 250;
- *kd = 0;
- *kd_div = 1;
-}
-
-int pd_snk_is_vbus_provided(int port)
-{
- return pd_check_vbus_level(port, VBUS_PRESENT);
-}
-
-const struct charger_config_t chg_chips[] = {
- {
- .i2c_port = I2C_PORT_USB_C0,
- .i2c_addr_flags = ISL923X_ADDR_FLAGS,
- .drv = &isl923x_drv,
- },
-};
-const unsigned int chg_cnt = ARRAY_SIZE(chg_chips);
-
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
- {
- .i2c_port = I2C_PORT_USB_C0,
- .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
- .flags = PI3USB9201_ALWAYS_POWERED,
- },
-};
-
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
- {
- .bus_type = EC_BUS_TYPE_I2C,
- .i2c_info = {
- .port = I2C_PORT_USB_C0,
- .addr_flags = RAA489000_TCPC0_I2C_FLAGS,
- },
- .flags = TCPC_FLAGS_TCPCI_REV2_0,
- .drv = &raa489000_tcpm_drv,
- },
-};
-
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
- {
- .usb_port = 0,
- .i2c_port = I2C_PORT_USB_C0,
- .i2c_addr_flags = PI3USB3X532_I2C_ADDR0,
- .driver = &pi3usb3x532_usb_mux_driver,
- },
-};
-
-uint16_t tcpc_get_alert_status(void)
-{
- uint16_t status = 0;
- int regval;
-
- /*
- * The interrupt line is shared between the TCPC and BC1.2 detector IC.
- * Therefore, go out and actually read the alert registers to report the
- * alert status.
- */
- if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
- if (!tcpc_read16(0, TCPC_REG_ALERT, &regval)) {
- /* The TCPCI Rev 1.0 spec says to ignore bits 14:12. */
- if (!(tcpc_config[0].flags & TCPC_FLAGS_TCPCI_REV2_0))
- regval &= ~((1 << 14) | (1 << 13) | (1 << 12));
-
- if (regval)
- status |= PD_STATUS_TCPC_ALERT_0;
- }
- }
-
- return status;
-}
-
-static void board_extpower(void)
-{
- int extpower_present;
-
- if (pd_is_connected(0))
- extpower_present = extpower_is_present();
- else
- extpower_present = 0;
-
- gpio_set_level(GPIO_EC_ACOK_OTG, extpower_present);
-}
-DECLARE_HOOK(HOOK_AC_CHANGE, board_extpower, HOOK_PRIO_DEFAULT);
-
-const struct i2c_port_t i2c_ports[] = {
- {
- "eeprom", I2C_PORT_EEPROM, 400, GPIO_EC_I2C_EEPROM_SCL,
- GPIO_EC_I2C_EEPROM_SDA
- },
-
- {
- "battery", I2C_PORT_BATTERY, 100, GPIO_EC_I2C_BATTERY_SCL,
- GPIO_EC_I2C_BATTERY_SDA
- },
-
-#ifdef HAS_TASK_MOTIONSENSE
- {
- "sensor", I2C_PORT_SENSOR, 400, GPIO_EC_I2C_SENSOR_SCL,
- GPIO_EC_I2C_SENSOR_SDA
- },
-#endif
-
- {
- "usbc0", I2C_PORT_USB_C0, 1000, GPIO_EC_I2C_USB_C0_SCL,
- GPIO_EC_I2C_USB_C0_SDA
- },
-#if CONFIG_USB_PD_PORT_MAX_COUNT > 1
- {
- "sub_usbc1", I2C_PORT_SUB_USB_C1, 1000,
- GPIO_EC_I2C_SUB_USB_C1_SCL, GPIO_EC_I2C_SUB_USB_C1_SDA
- },
-#endif
-};
View Lorry Controller Status