diff options
Diffstat (limited to 'board/corori/board.h')
| -rw-r--r-- | board/corori/board.h | 115 |
1 files changed, 0 insertions, 115 deletions
diff --git a/board/corori/board.h b/board/corori/board.h deleted file mode 100644 index 33370ecd27..0000000000 --- a/board/corori/board.h +++ /dev/null @@ -1,115 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Lalala board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -#define VARIANT_KEEBY_EC_NPCX797FC -#include "baseboard.h" - -/* - * The RAM and flash size combination on the the NPCX797FC does not leave - * any unused flash space that can be used to store the .init_rom section. - */ -#undef CONFIG_CHIP_INIT_ROM_REGION - -/* Battery */ -#define CONFIG_BATTERY_FUEL_GAUGE - -/* Charger */ -#define CONFIG_CHARGER_RAA489000 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#undef CONFIG_CMD_CHARGER_DUMP -#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE -#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (100 * MSEC) - -/* Keyboard */ - -#define CONFIG_KEYBOARD_KEYPAD - -/* LED defines */ -#define CONFIG_LED_COMMON -#define CONFIG_BATTERY_LEVEL_NEAR_FULL 94 -#define GPIO_BAT_LED_AMBER GPIO_LED_Y_ODL -#define GPIO_PWR_LED_WHITE GPIO_LED_W_ODL - - -/* PWM */ -#define NPCX7_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */ - -/* Temp sensor */ -#define CONFIG_TEMP_SENSOR -#define CONFIG_THERMISTOR -#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B - -/* USB */ -#define CONFIG_BC12_DETECT_PI3USB9201 - -/* Common USB-A defines */ -#define USB_PORT_COUNT 1 - -/******************************************************************************/ - -/* USB PD */ -#define CONFIG_USB_PD_PORT_MAX_COUNT 1 -#define CONFIG_USB_PD_TCPM_RAA489000 - -/* USB defines specific to external TCPCs */ -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_VBUS_DETECT_TCPC -#define CONFIG_USB_PD_DISCHARGE_TCPC -#define CONFIG_USB_PD_TCPC_LOW_POWER - -/* Variant references the TCPCs to determine Vbus sourcing */ -#define CONFIG_USB_PD_5V_EN_CUSTOM - -/* I2C configuration */ -#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 -#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0 -#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0 -#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0 -#define I2C_PORT_SUB_USB_C1 NPCX_I2C_PORT2_0 -#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 -/* TODO(b:147440290): Need to handle multiple charger ICs */ -#define I2C_PORT_CHARGER I2C_PORT_USB_C0 - -#define I2C_PORT_ACCEL I2C_PORT_SENSOR - -#define I2C_ADDR_EEPROM_FLAGS 0x50 /* 7b address */ - -/* Volume Button feature */ -#define CONFIG_VOLUME_BUTTONS -#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL -#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -enum adc_channel { - ADC_TEMP_SENSOR_1, /* ADC0 */ - ADC_TEMP_SENSOR_2, /* ADC1 */ - ADC_VSNS_PP3300_A, /* ADC9 */ - ADC_CH_COUNT -}; - -enum temp_sensor_id { - TEMP_SENSOR_1, - TEMP_SENSOR_2, - TEMP_SENSOR_COUNT -}; - -enum battery_type { - BATTERY_C21N2018, - BATTERY_TYPE_COUNT, -}; - -int board_is_sourcing_vbus(int port); -#endif /* !__ASSEMBLER__ */ -#endif /* __CROS_EC_BOARD_H */ |