diff options
Diffstat (limited to 'board/cret/board.h')
| -rw-r--r-- | board/cret/board.h | 52 |
1 files changed, 21 insertions, 31 deletions
diff --git a/board/cret/board.h b/board/cret/board.h index 69394fe218..2080185c7c 100644 --- a/board/cret/board.h +++ b/board/cret/board.h @@ -1,4 +1,4 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. +/* Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -29,6 +29,7 @@ /* Charger */ #define CONFIG_CHARGER_RAA489000 +#define PD_MAX_VOLTAGE_MV 20000 #define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 #define CONFIG_CHARGER_SENSE_RESISTOR 10 #undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE @@ -47,7 +48,7 @@ /* PWM */ #define CONFIG_PWM -#define NPCX7_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */ +#define NPCX7_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */ /* USB */ #define CONFIG_BC12_DETECT_PI3USB9201 @@ -74,23 +75,22 @@ #undef PD_POWER_SUPPLY_TURN_OFF_DELAY #undef CONFIG_USBC_VCONN_SWAP_DELAY_US /* 20% margin added for these timings */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 13080 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 16080 /* us */ +#define PD_POWER_SUPPLY_TURN_ON_DELAY 13080 /* us */ +#define PD_POWER_SUPPLY_TURN_OFF_DELAY 16080 /* us */ #undef CONFIG_USBC_VCONN_SWAP_DELAY_US -#define CONFIG_USBC_VCONN_SWAP_DELAY_US 787 /* us */ - +#define CONFIG_USBC_VCONN_SWAP_DELAY_US 787 /* us */ /* I2C configuration */ -#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 -#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0 -#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0 -#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0 +#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 +#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0 +#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0 +#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0 #define I2C_PORT_SUB_USB_C1 NPCX_I2C_PORT2_0 -#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 +#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 /* TODO(b:147440290): Need to handle multiple charger ICs */ -#define I2C_PORT_CHARGER I2C_PORT_USB_C0 +#define I2C_PORT_CHARGER I2C_PORT_USB_C0 -#define I2C_PORT_ACCEL I2C_PORT_SENSOR +#define I2C_PORT_ACCEL I2C_PORT_SENSOR #define I2C_ADDR_EEPROM_FLAGS 0x50 /* 7b address */ @@ -98,18 +98,17 @@ #define CONFIG_CMD_ACCELS #define CONFIG_CMD_ACCEL_INFO -#define CONFIG_ACCEL_LIS2DE /* Lid accel */ -#define CONFIG_ACCELGYRO_LSM6DSO /* Base accel */ +#define CONFIG_ACCEL_LIS2DE /* Lid accel */ +#define CONFIG_ACCELGYRO_LSM6DSO /* Base accel */ #define CONFIG_ACCEL_LSM6DSO_INT_EVENT \ TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) /* Lid operates in forced mode, base in FIFO */ #define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) #define CONFIG_ACCEL_FIFO -#define CONFIG_ACCEL_FIFO_SIZE 256 /* Must be a power of 2 */ +#define CONFIG_ACCEL_FIFO_SIZE 256 /* Must be a power of 2 */ #define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) - #define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT #define CONFIG_LID_ANGLE @@ -132,24 +131,15 @@ #include "registers.h" enum adc_channel { - ADC_TEMP_SENSOR_1, /* ADC0 */ - ADC_TEMP_SENSOR_2, /* ADC1 */ - ADC_VSNS_PP3300_A, /* ADC9 */ + ADC_TEMP_SENSOR_1, /* ADC0 */ + ADC_TEMP_SENSOR_2, /* ADC1 */ + ADC_VSNS_PP3300_A, /* ADC9 */ ADC_CH_COUNT }; -enum sensor_id { - LID_ACCEL, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT -}; +enum sensor_id { LID_ACCEL, BASE_ACCEL, BASE_GYRO, SENSOR_COUNT }; -enum temp_sensor_id { - TEMP_SENSOR_1, - TEMP_SENSOR_2, - TEMP_SENSOR_COUNT -}; +enum temp_sensor_id { TEMP_SENSOR_1, TEMP_SENSOR_2, TEMP_SENSOR_COUNT }; enum pwm_channel { PWM_CH_KBLIGHT, |