diff options
Diffstat (limited to 'board/dalboz/board.h')
| -rw-r--r-- | board/dalboz/board.h | 210 |
1 files changed, 0 insertions, 210 deletions
diff --git a/board/dalboz/board.h b/board/dalboz/board.h deleted file mode 100644 index eecdc72d41..0000000000 --- a/board/dalboz/board.h +++ /dev/null @@ -1,210 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Trembyle board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -#define VARIANT_ZORK_DALBOZ - -#include <stdbool.h> -#include "baseboard.h" - -#define CONFIG_IO_EXPANDER_PCAL6408 - -#define CONFIG_USBC_PPC_NX20P3483 -#define CONFIG_USB_MUX_PS8740 -#define CONFIG_USB_MUX_PS8743 -#define CONFIG_USB_MUX_RUNTIME_CONFIG - -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PORT_ENABLE_DYNAMIC - -/* USB-A config */ -#define GPIO_USB1_ILIM_SEL IOEX_USB_A0_CHARGE_EN_L -#define GPIO_USB2_ILIM_SEL IOEX_USB_A1_CHARGE_EN_DB_L - -/* Motion sensing drivers */ -#define CONFIG_ACCELGYRO_LSM6DSM -#define CONFIG_ACCEL_LSM6DSM_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) -#define CONFIG_ACCEL_LIS2DWL -#define CONFIG_ACCEL_INTERRUPTS -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO -#define CONFIG_TABLET_MODE -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_UPDATE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL - - - -/* GPIO mapping from board specific name to EC common name. */ -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_ODL -#define CONFIG_SCI_GPIO GPIO_EC_FCH_SCI_ODL -#define GPIO_AC_PRESENT GPIO_ACOK_OD -#define GPIO_CPU_PROCHOT GPIO_PROCHOT_ODL -#define GPIO_EC_INT_L GPIO_EC_AP_INT_ODL -#define GPIO_ENABLE_BACKLIGHT_L GPIO_EC_EDP_BL_DISABLE -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV -#define GPIO_PCH_PWRBTN_L GPIO_EC_FCH_PWR_BTN_L -#define GPIO_PCH_RSMRST_L GPIO_EC_FCH_RSMRST_L -#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L -#define GPIO_PCH_SLP_S5_L GPIO_SLP_S5_L -#define GPIO_PCH_SYS_PWROK GPIO_EC_FCH_PWROK -#define GPIO_PCH_WAKE_L GPIO_EC_FCH_WAKE_L -#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL -#define GPIO_S0_PGOOD GPIO_S0_PWROK_OD -#define GPIO_S5_PGOOD GPIO_EC_PWROK_OD -#define GPIO_SYS_RESET_L GPIO_EC_SYS_RST_L -#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL -#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL -#define GPIO_WP_L GPIO_EC_WP_L -#define GPIO_PACKET_MODE_EN GPIO_EC_H1_PACKET_MODE - -#ifndef __ASSEMBLER__ - -/* This I2C moved. Temporarily detect and support the V0 HW. */ -extern int I2C_PORT_BATTERY; - -enum adc_channel { - ADC_TEMP_SENSOR_CHARGER, - ADC_TEMP_SENSOR_SOC, - ADC_CH_COUNT -}; - -enum battery_type { - BATTERY_SMP, - BATTERY_LGC, - BATTERY_CEL, - BATTERY_TYPE_COUNT, -}; - -enum pwm_channel { - PWM_CH_KBLIGHT = 0, - PWM_CH_COUNT -}; - -enum ioex_port { - IOEX_C0_NCT3807 = 0, - IOEX_C1_NCT3807, - IOEX_HDMI_PCAL6408, - IOEX_PORT_COUNT -}; - -#define PORT_TO_HPD(port) ((port == 0) \ - ? GPIO_USB3_C0_DP2_HPD \ - : GPIO_DP1_HPD) - -enum temp_sensor_id { - TEMP_SENSOR_CHARGER = 0, - TEMP_SENSOR_SOC, - TEMP_SENSOR_CPU, - TEMP_SENSOR_COUNT -}; - -enum usba_port { - USBA_PORT_A0 = 0, - USBA_PORT_A1, - USBA_PORT_COUNT -}; - -enum usbc_port { - USBC_PORT_C0 = 0, - USBC_PORT_C1, - USBC_PORT_COUNT -}; - -/***************************************************************************** - * CBI EC FW Configuration - */ - -/** - * DALBOZ_MB_USBAC - * USB-A0 Speed: 5 Gbps - * Retimer: none - * USB-C0 Speed: 5 Gbps - * Retimer: none - * TCPC: NCT3807 - * PPC: AOZ1380 - * IOEX: TCPC - */ -enum ec_cfg_usb_mb_type { - DALBOZ_MB_USBAC = 0, -}; - -/** - * DALBOZ_DB_D_OPT1_USBAC - * USB-A1 Speed: 5 Gbps - * Retimer: TUSB522 - * USB-C1 Speed: 5 Gbps - * Retimer: PS8740 - * TCPC: NCT3807 - * PPC: NX20P3483 - * IOEX: TCPC - * HDMI Exists: no - * Retimer: none - * MST Hub: none - * - * DALBOZ_DB_D_OPT2_USBA_HDMI - * USB-A1 Speed: 5 Gbps - * Retimer: TUSB522 - * USB-C1 none - * IOEX: PCAL6408 - * HDMI Exists: yes - * Retimer: PI3HDX1204 - * MST Hub: none - */ -enum ec_cfg_usb_db_type { - DALBOZ_DB_D_OPT1_USBAC = 0, - DALBOZ_DB_D_OPT2_USBA_HDMI = 1, -}; - -#include "cbi_ec_fw_config.h" - -#define HAS_USBC1 \ - (BIT(DALBOZ_DB_D_OPT1_USBAC)) - -static inline bool ec_config_has_usbc1(void) -{ - return !!(BIT(ec_config_get_usb_db()) & - HAS_USBC1); -} - -#define HAS_USBC1_RETIMER_PS8740 \ - (BIT(DALBOZ_DB_D_OPT1_USBAC)) - -static inline bool ec_config_has_usbc1_retimer_ps8740(void) -{ - return !!(BIT(ec_config_get_usb_db()) & - HAS_USBC1_RETIMER_PS8740); -} - -#define HAS_HDMI_RETIMER_PI3HDX1204 \ - (BIT(DALBOZ_DB_D_OPT2_USBA_HDMI)) - -static inline bool ec_config_has_hdmi_retimer_pi3hdx1204(void) -{ - return !!(BIT(ec_config_get_usb_db()) & - HAS_HDMI_RETIMER_PI3HDX1204); -} - -/* These IO expander GPIOs vary with DB option. */ -extern enum gpio_signal IOEX_USB_A1_RETIMER_EN; -extern enum gpio_signal IOEX_USB_A1_CHARGE_EN_DB_L; - -void board_reset_pd_mcu(void); - -/* Common definition for the USB PD interrupt handlers. */ -void tcpc_alert_event(enum gpio_signal signal); -void bc12_interrupt(enum gpio_signal signal); -void ppc_interrupt(enum gpio_signal signal); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |