summaryrefslogtreecommitdiff
path: root/board/dewatt
diff options
context:
space:
mode:
Diffstat (limited to 'board/dewatt')
-rw-r--r--board/dewatt/battery.c127
-rw-r--r--board/dewatt/board.c536
-rw-r--r--board/dewatt/board.h96
-rw-r--r--board/dewatt/board_fw_config.c42
-rw-r--r--board/dewatt/board_fw_config.h38
-rw-r--r--board/dewatt/build.mk12
-rw-r--r--board/dewatt/ec.tasklist26
-rw-r--r--board/dewatt/gpio.inc28
-rw-r--r--board/dewatt/led.c91
-rw-r--r--board/dewatt/vif_override.xml3
10 files changed, 0 insertions, 999 deletions
diff --git a/board/dewatt/battery.c b/board/dewatt/battery.c
deleted file mode 100644
index ddf3adff50..0000000000
--- a/board/dewatt/battery.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Battery pack vendor provided charging profile
- */
-
-#include "battery_fuel_gauge.h"
-
-/*
- * Battery info for all Guybrush battery types. Note that the fields
- * start_charging_min/max and charging_min/max are not used for the charger.
- * The effective temperature limits are given by discharging_min/max_c.
- *
- * Fuel Gauge (FG) parameters which are used for determining if the battery
- * is connected, the appropriate ship mode (battery cutoff) command, and the
- * charge/discharge FETs status.
- *
- * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
- * register. For some batteries, the charge/discharge FET bits are set when
- * charging/discharging is active, in other types, these bits set mean that
- * charging/discharging is disabled. Therefore, in addition to the mask for
- * these bits, a disconnect value must be specified. Note that for TI fuel
- * gauge, the charge/discharge FET status is found in Operation Status (0x54),
- * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
- * Operation status which contains the FET status bits.
- *
- * The assumption for battery types supported is that the charge/discharge FET
- * status can be read with a sb_read() command and therefore, only the register
- * address, mask, and disconnect value need to be provided.
- */
-const struct board_batt_params board_battery_info[] = {
- /* AEC 5477109 */
- [BATTERY_AEC] = {
- .fuel_gauge = {
- .manuf_name = "AEC",
- .ship_mode = {
- .reg_addr = 0x00,
- .reg_data = { 0x0010, 0x0010 },
- },
- .sleep_mode = {
- .sleep_supported = true,
- .reg_addr = 0x00,
- .reg_data = 0x0011,
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- }
- },
- .batt_info = {
- .voltage_max = 8700, /* mV */
- .voltage_normal = 7600,
- .voltage_min = 6000,
- .precharge_current = 100, /* mA */
- .start_charging_min_c = 0,
- .start_charging_max_c = 45,
- .charging_min_c = 0,
- .charging_max_c = 50,
- .discharging_min_c = -20,
- .discharging_max_c = 60,
- },
- },
- /* AP18F4M / LIS4163ACPC */
- [BATTERY_AP18F4M] = {
- .fuel_gauge = {
- .manuf_name = "Murata KT00404001",
- .ship_mode = {
- .reg_addr = 0x3A,
- .reg_data = { 0xC574, 0xC574 },
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- }
- },
- .batt_info = {
- .voltage_max = 8700, /* mV */
- .voltage_normal = 7600,
- .voltage_min = 5500,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = 0,
- .start_charging_max_c = 50,
- .charging_min_c = 0,
- .charging_max_c = 60,
- .discharging_min_c = -20,
- .discharging_max_c = 75,
- },
- },
- /* POW-TECH Battery Information */
- [BATTERY_POWER_TECH] = {
- .fuel_gauge = {
- .manuf_name = "POW-TECH",
- .ship_mode = {
- .reg_addr = 0x0,
- .reg_data = { 0x10, 0x10 },
- },
- .sleep_mode = {
- .sleep_supported = true,
- .reg_addr = 0x00,
- .reg_data = 0x0011,
- },
- .fet = {
- .reg_addr = 0x00,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- }
- },
- .batt_info = {
- .voltage_max = 8800, /* mV */
- .voltage_normal = 7700,
- .voltage_min = 6000,
- .precharge_current = 88, /* mA */
- .start_charging_min_c = 0,
- .start_charging_max_c = 45,
- .charging_min_c = 0,
- .charging_max_c = 45,
- .discharging_min_c = -20,
- .discharging_max_c = 60,
- },
- },
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_AP18F4M;
diff --git a/board/dewatt/board.c b/board/dewatt/board.c
deleted file mode 100644
index 53180d39cb..0000000000
--- a/board/dewatt/board.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Guybrush board-specific configuration */
-
-#include "adc.h"
-#include "base_fw_config.h"
-#include "board_fw_config.h"
-#include "button.h"
-#include "common.h"
-#include "cros_board_info.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/accelgyro_bmi160.h"
-#include "driver/accelgyro_bmi323.h"
-#include "driver/accel_bma422.h"
-#include "driver/retimer/ps8811.h"
-#include "driver/retimer/ps8818.h"
-#include "driver/temp_sensor/sb_tsi.h"
-#include "driver/temp_sensor/tmp112.h"
-#include "extpower.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "switch.h"
-#include "tablet_mode.h"
-#include "temp_sensor.h"
-#include "temp_sensor/thermistor.h"
-#include "temp_sensor/tmp112.h"
-#include "thermal.h"
-#include "usb_mux.h"
-
-#include "gpio_list.h" /* Must come after other header files. */
-
-/* Motion sensor mutex */
-static struct mutex g_lid_mutex;
-static struct mutex g_base_mutex;
-
-/* Motion sensor private data */
-static struct bmi_drv_data_t g_bmi_data;
-static struct accelgyro_saved_data_t g_bma422_data;
-
-/* Matrix to rotate accelrator into standard reference frame */
-const mat33_fp_t base_standard_ref = {
- { FLOAT_TO_FP(-1), 0, 0},
- { 0, FLOAT_TO_FP(1), 0},
- { 0, 0, FLOAT_TO_FP(-1)}
-};
-
-const mat33_fp_t lid_standard_ref = {
- { 0, FLOAT_TO_FP(-1), 0},
- { FLOAT_TO_FP(-1), 0, 0},
- { 0, 0, FLOAT_TO_FP(-1)}
-};
-
-/*
- * We have total 30 pins for keyboard connecter {-1, -1} mean
- * the N/A pin that don't consider it and reserve index 0 area
- * that we don't have pin 0.
- */
-const int keyboard_factory_scan_pins[][2] = {
- {-1, -1}, {0, 5}, {1, 1}, {1, 0}, {0, 6},
- {0, 7}, {-1, -1}, {-1, -1}, {1, 4}, {1, 3},
- {-1, -1}, {1, 6}, {1, 7}, {3, 1}, {2, 0},
- {1, 5}, {2, 6}, {2, 7}, {2, 1}, {2, 4},
- {2, 5}, {1, 2}, {2, 3}, {2, 2}, {3, 0},
- {-1, -1}, {0, 4}, {-1, -1}, {8, 2}, {-1, -1},
- {-1, -1},
-};
-const int keyboard_factory_scan_pins_used =
- ARRAY_SIZE(keyboard_factory_scan_pins);
-
-struct motion_sensor_t motion_sensors[] = {
- [BASE_ACCEL] = {
- .name = "Base Accel",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_BMI323,
- .type = MOTIONSENSE_TYPE_ACCEL,
- .location = MOTIONSENSE_LOC_BASE,
- .drv = &bmi3xx_drv,
- .mutex = &g_base_mutex,
- .drv_data = &g_bmi_data,
- .port = I2C_PORT_SENSOR,
- .i2c_spi_addr_flags = BMI3_ADDR_I2C_PRIM,
- .rot_standard_ref = &base_standard_ref,
- .min_frequency = BMI_ACCEL_MIN_FREQ,
- .max_frequency = BMI_ACCEL_MAX_FREQ,
- .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs */
- .config = {
- /* EC use accel for angle detection */
- [SENSOR_CONFIG_EC_S0] = {
- .odr = 12500 | ROUND_UP_FLAG,
- .ec_rate = 100 * MSEC,
- },
- /* Sensor on in S3 */
- [SENSOR_CONFIG_EC_S3] = {
- .odr = 12500 | ROUND_UP_FLAG,
- .ec_rate = 0,
- },
- },
- },
- [LID_ACCEL] = {
- .name = "Lid Accel",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_BMA422,
- .type = MOTIONSENSE_TYPE_ACCEL,
- .location = MOTIONSENSE_LOC_LID,
- .drv = &bma4_accel_drv,
- .mutex = &g_lid_mutex,
- .drv_data = &g_bma422_data,
- .port = I2C_PORT_SENSOR,
- .i2c_spi_addr_flags = BMA4_I2C_ADDR_PRIMARY,
- .rot_standard_ref = &lid_standard_ref,
- .min_frequency = BMA4_ACCEL_MIN_FREQ,
- .max_frequency = BMA4_ACCEL_MAX_FREQ,
- .default_range = 2, /* g, enough for laptop. */
- .config = {
- /* EC use accel for angle detection */
- [SENSOR_CONFIG_EC_S0] = {
- .odr = 12500 | ROUND_UP_FLAG,
- .ec_rate = 100 * MSEC,
- },
- /* Sensor on in S3 */
- [SENSOR_CONFIG_EC_S3] = {
- .odr = 12500 | ROUND_UP_FLAG,
- .ec_rate = 0,
- },
- },
- },
- [BASE_GYRO] = {
- .name = "Base Gyro",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_BMI323,
- .type = MOTIONSENSE_TYPE_GYRO,
- .location = MOTIONSENSE_LOC_BASE,
- .drv = &bmi3xx_drv,
- .mutex = &g_base_mutex,
- .drv_data = &g_bmi_data,
- .port = I2C_PORT_SENSOR,
- .i2c_spi_addr_flags = BMI3_ADDR_I2C_PRIM,
- .default_range = 1000, /* dps */
- .rot_standard_ref = &base_standard_ref,
- .min_frequency = BMI_GYRO_MIN_FREQ,
- .max_frequency = BMI_GYRO_MAX_FREQ,
- },
-};
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-struct motion_sensor_t bmi160_base_accel = {
- .name = "Base Accel",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_BMI160,
- .type = MOTIONSENSE_TYPE_ACCEL,
- .location = MOTIONSENSE_LOC_BASE,
- .drv = &bmi160_drv,
- .mutex = &g_base_mutex,
- .drv_data = &g_bmi_data,
- .port = I2C_PORT_SENSOR,
- .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
- .rot_standard_ref = &base_standard_ref,
- .min_frequency = BMI_ACCEL_MIN_FREQ,
- .max_frequency = BMI_ACCEL_MAX_FREQ,
- .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs */
- .config = {
- /* EC use accel for angle detection */
- [SENSOR_CONFIG_EC_S0] = {
- .odr = 10000 | ROUND_UP_FLAG,
- .ec_rate = 100 * MSEC,
- },
- /* Sensor on in S3 */
- [SENSOR_CONFIG_EC_S3] = {
- .odr = 10000 | ROUND_UP_FLAG,
- .ec_rate = 0,
- },
- },
-};
-
-struct motion_sensor_t bmi160_base_gyro = {
- .name = "Base Gyro",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_BMI160,
- .type = MOTIONSENSE_TYPE_GYRO,
- .location = MOTIONSENSE_LOC_BASE,
- .drv = &bmi160_drv,
- .mutex = &g_base_mutex,
- .drv_data = &g_bmi_data,
- .port = I2C_PORT_SENSOR,
- .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
- .default_range = 1000, /* dps */
- .rot_standard_ref = &base_standard_ref,
- .min_frequency = BMI_GYRO_MIN_FREQ,
- .max_frequency = BMI_GYRO_MAX_FREQ,
-};
-
-__override enum ec_error_list
-board_a1_ps8811_retimer_init(const struct usb_mux *me)
-{
- /* Set channel A output swing */
- RETURN_ERROR(ps8811_i2c_field_update(
- me, PS8811_REG_PAGE1, PS8811_REG1_USB_CHAN_A_SWING,
- PS8811_CHAN_A_SWING_MASK, 0x2 << PS8811_CHAN_A_SWING_SHIFT));
-
- /* Set channel B output swing */
- RETURN_ERROR(ps8811_i2c_field_update(
- me, PS8811_REG_PAGE1, PS8811_REG1_USB_CHAN_B_SWING,
- PS8811_CHAN_B_SWING_MASK, 0x2 << PS8811_CHAN_B_SWING_SHIFT));
-
- /* Set channel B de-emphasis to -6dB and pre-shoot to 1.5 dB */
- RETURN_ERROR(ps8811_i2c_field_update(
- me, PS8811_REG_PAGE1, PS8811_REG1_USB_CHAN_B_DE_PS_LSB,
- PS8811_CHAN_B_DE_PS_LSB_MASK, PS8811_CHAN_B_DE_6_PS_1_5_LSB));
-
- RETURN_ERROR(ps8811_i2c_field_update(
- me, PS8811_REG_PAGE1, PS8811_REG1_USB_CHAN_B_DE_PS_MSB,
- PS8811_CHAN_B_DE_PS_MSB_MASK, PS8811_CHAN_B_DE_6_PS_1_5_MSB));
-
- return EC_SUCCESS;
-}
-
-/*
- * PS8818 set mux board tuning.
- * Adds in board specific gain and DP lane count configuration
- * TODO(b/179036200): Adjust PS8818 tuning for guybrush reference
- */
-__override int board_c1_ps8818_mux_set(const struct usb_mux *me,
- mux_state_t mux_state)
-{
- int rv = EC_SUCCESS;
-
- /* USB specific config */
- if (mux_state & USB_PD_MUX_USB_ENABLED) {
- /* Boost the USB gain */
- rv = ps8818_i2c_field_update8(me,
- PS8818_REG_PAGE1,
- PS8818_REG1_APTX1EQ_10G_LEVEL,
- PS8818_EQ_LEVEL_UP_MASK,
- PS8818_EQ_LEVEL_UP_19DB);
- if (rv)
- return rv;
-
- rv = ps8818_i2c_field_update8(me,
- PS8818_REG_PAGE1,
- PS8818_REG1_APTX2EQ_10G_LEVEL,
- PS8818_EQ_LEVEL_UP_MASK,
- PS8818_EQ_LEVEL_UP_19DB);
- if (rv)
- return rv;
-
- rv = ps8818_i2c_field_update8(me,
- PS8818_REG_PAGE1,
- PS8818_REG1_APTX1EQ_5G_LEVEL,
- PS8818_EQ_LEVEL_UP_MASK,
- PS8818_EQ_LEVEL_UP_19DB);
- if (rv)
- return rv;
-
- rv = ps8818_i2c_field_update8(me,
- PS8818_REG_PAGE1,
- PS8818_REG1_APTX2EQ_5G_LEVEL,
- PS8818_EQ_LEVEL_UP_MASK,
- PS8818_EQ_LEVEL_UP_19DB);
- if (rv)
- return rv;
-
- /* Set the RX input termination */
- rv = ps8818_i2c_field_update8(me,
- PS8818_REG_PAGE1,
- PS8818_REG1_RX_PHY,
- PS8818_RX_INPUT_TERM_MASK,
- PS8818_RX_INPUT_TERM_112_OHM);
- if (rv)
- return rv;
- }
-
- /* DP specific config */
- if (mux_state & USB_PD_MUX_DP_ENABLED) {
- /* Boost the DP gain */
- rv = ps8818_i2c_field_update8(me,
- PS8818_REG_PAGE1,
- PS8818_REG1_DPEQ_LEVEL,
- PS8818_DPEQ_LEVEL_UP_MASK,
- PS8818_DPEQ_LEVEL_UP_19DB);
- if (rv)
- return rv;
-
- /* Enable HPD on the DB */
- gpio_set_level(GPIO_USB_C1_HPD, 1);
- } else {
- /* Disable HPD on the DB */
- gpio_set_level(GPIO_USB_C1_HPD, 0);
- }
-
- return rv;
-}
-
-/*
- * ANX7491(A1) and ANX7451(C1) are on the same i2c bus. Both default
- * to 0x29 for the USB i2c address. This moves ANX7451(C1) USB i2c
- * address to 0x2A. ANX7491(A1) will stay at the default 0x29.
- */
-uint16_t board_anx7451_get_usb_i2c_addr(const struct usb_mux *me)
-{
- ASSERT(me->usb_port == USBC_PORT_C1);
- return 0x2a;
-}
-
-/*
- * Base Gyro Sensor dynamic configuration
- */
-static int base_gyro_config;
-
-static void board_update_motion_sensor_config(void)
-{
- if (board_is_convertible()) {
- if (get_board_version() == 1) {
- motion_sensors[BASE_ACCEL] = bmi160_base_accel;
- motion_sensors[BASE_GYRO] = bmi160_base_gyro;
- base_gyro_config = BASE_GYRO_BMI160;
- ccprints("BASE GYRO is BMI160");
- } else {
- base_gyro_config = BASE_GYRO_BMI323;
- ccprints("BASE GYRO is BMI323");
- }
-
- motion_sensor_count = ARRAY_SIZE(motion_sensors);
- /* Enable Base Accel and Gyro interrupt */
- gpio_enable_interrupt(GPIO_6AXIS_INT_L);
- } else {
- motion_sensor_count = 0;
- gmr_tablet_switch_disable();
- /* Base accel is not stuffed, don't allow line to float */
- gpio_set_flags(GPIO_6AXIS_INT_L, GPIO_INPUT | GPIO_PULL_DOWN);
- }
-}
-
-void motion_interrupt(enum gpio_signal signal)
-{
- switch (base_gyro_config) {
- case BASE_GYRO_BMI160:
- bmi160_interrupt(signal);
- break;
- case BASE_GYRO_BMI323:
- default:
- bmi3xx_interrupt(signal);
- break;
- }
-}
-
-static void board_init(void)
-{
- board_update_motion_sensor_config();
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-static void board_chipset_startup(void)
-{
- if (get_board_version() > 1)
- tmp112_init();
-}
-DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_chipset_startup,
- HOOK_PRIO_DEFAULT);
-
-int board_get_soc_temp_k(int idx, int *temp_k)
-{
- if (chipset_in_state(CHIPSET_STATE_HARD_OFF))
- return EC_ERROR_NOT_POWERED;
-
- return tmp112_get_val_k(idx, temp_k);
-}
-
-int board_get_soc_temp_mk(int *temp_mk)
-{
- if (chipset_in_state(CHIPSET_STATE_HARD_OFF))
- return EC_ERROR_NOT_POWERED;
-
- return tmp112_get_val_mk(TMP112_SOC, temp_mk);
-}
-
-int board_get_ambient_temp_mk(int *temp_mk)
-{
- if (chipset_in_state(CHIPSET_STATE_HARD_OFF))
- return EC_ERROR_NOT_POWERED;
-
- return tmp112_get_val_mk(TMP112_AMB, temp_mk);
-}
-
-/* ADC Channels */
-const struct adc_t adc_channels[] = {
- [ADC_TEMP_SENSOR_SOC] = {
- .name = "SOC",
- .input_ch = NPCX_ADC_CH0,
- .factor_mul = ADC_MAX_VOLT,
- .factor_div = ADC_READ_MAX + 1,
- .shift = 0,
- },
- [ADC_TEMP_SENSOR_CHARGER] = {
- .name = "CHARGER",
- .input_ch = NPCX_ADC_CH1,
- .factor_mul = ADC_MAX_VOLT,
- .factor_div = ADC_READ_MAX + 1,
- .shift = 0,
- },
- [ADC_TEMP_SENSOR_MEMORY] = {
- .name = "MEMORY",
- .input_ch = NPCX_ADC_CH2,
- .factor_mul = ADC_MAX_VOLT,
- .factor_div = ADC_READ_MAX + 1,
- .shift = 0,
- },
- [ADC_CORE_IMON1] = {
- .name = "CORE_I",
- .input_ch = NPCX_ADC_CH3,
- .factor_mul = ADC_MAX_VOLT,
- .factor_div = ADC_READ_MAX + 1,
- .shift = 0,
- },
- [ADC_SOC_IMON2] = {
- .name = "SOC_I",
- .input_ch = NPCX_ADC_CH4,
- .factor_mul = ADC_MAX_VOLT,
- .factor_div = ADC_READ_MAX + 1,
- .shift = 0,
- },
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/* Temp Sensors */
-static int board_get_memory_temp(int, int *);
-
-const struct tmp112_sensor_t tmp112_sensors[] = {
- { I2C_PORT_SENSOR, TMP112_I2C_ADDR_FLAGS0 },
- { I2C_PORT_SENSOR, TMP112_I2C_ADDR_FLAGS1 },
-};
-BUILD_ASSERT(ARRAY_SIZE(tmp112_sensors) == TMP112_COUNT);
-
-const struct temp_sensor_t temp_sensors[] = {
- [TEMP_SENSOR_SOC] = {
- .name = "SOC",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = board_get_soc_temp_k,
- .idx = TMP112_SOC,
- },
- [TEMP_SENSOR_CHARGER] = {
- .name = "Charger",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = get_temp_3v3_30k9_47k_4050b,
- .idx = ADC_TEMP_SENSOR_CHARGER,
- },
- [TEMP_SENSOR_MEMORY] = {
- .name = "Memory",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = board_get_memory_temp,
- .idx = ADC_TEMP_SENSOR_MEMORY,
- },
- [TEMP_SENSOR_CPU] = {
- .name = "CPU",
- .type = TEMP_SENSOR_TYPE_CPU,
- .read = sb_tsi_get_val,
- .idx = 0,
- },
- [TEMP_SENSOR_AMBIENT] = {
- .name = "Ambient",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = tmp112_get_val_k,
- .idx = TMP112_AMB,
- },
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT] = {
- [TEMP_SENSOR_SOC] = {
- .temp_host = {
- [EC_TEMP_THRESH_HIGH] = C_TO_K(100),
- [EC_TEMP_THRESH_HALT] = C_TO_K(105),
- },
- .temp_host_release = {
- [EC_TEMP_THRESH_HIGH] = C_TO_K(80),
- },
- /* TODO: Setting fan off to 0 so it's allways on */
- .temp_fan_off = C_TO_K(0),
- .temp_fan_max = C_TO_K(70),
- },
- [TEMP_SENSOR_CHARGER] = {
- .temp_host = {
- [EC_TEMP_THRESH_HIGH] = C_TO_K(100),
- [EC_TEMP_THRESH_HALT] = C_TO_K(105),
- },
- .temp_host_release = {
- [EC_TEMP_THRESH_HIGH] = C_TO_K(80),
- },
- .temp_fan_off = 0,
- .temp_fan_max = 0,
- },
- [TEMP_SENSOR_MEMORY] = {
- .temp_host = {
- [EC_TEMP_THRESH_HIGH] = C_TO_K(100),
- [EC_TEMP_THRESH_HALT] = C_TO_K(105),
- },
- .temp_host_release = {
- [EC_TEMP_THRESH_HIGH] = C_TO_K(80),
- },
- .temp_fan_off = 0,
- .temp_fan_max = 0,
- },
- [TEMP_SENSOR_CPU] = {
- .temp_host = {
- [EC_TEMP_THRESH_HIGH] = C_TO_K(100),
- [EC_TEMP_THRESH_HALT] = C_TO_K(105),
- },
- .temp_host_release = {
- [EC_TEMP_THRESH_HIGH] = C_TO_K(80),
- },
- /*
- * CPU temp sensor fan thresholds are high because they are a
- * backup for the SOC temp sensor fan thresholds.
- */
- .temp_fan_off = C_TO_K(60),
- .temp_fan_max = C_TO_K(90),
- },
- /*
- * Note: Leave ambient entries at 0, both as it does not represent a
- * hotspot and as not all boards have this sensor
- */
-};
-BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
-
-static int board_get_memory_temp(int idx, int *temp_k)
-{
- if (chipset_in_state(CHIPSET_STATE_HARD_OFF))
- return EC_ERROR_NOT_POWERED;
- return get_temp_3v3_30k9_47k_4050b(idx, temp_k);
-}
diff --git a/board/dewatt/board.h b/board/dewatt/board.h
deleted file mode 100644
index f5c47718d5..0000000000
--- a/board/dewatt/board.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Guybrush board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* Baseboard features */
-#include "baseboard.h"
-
-/* Motion sensing drivers */
-
-/* Keyboard features */
-#define CONFIG_KEYBOARD_FACTORY_TEST
-
-/* Sensors */
-#define CONFIG_ACCELGYRO_BMI160
-#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
- TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define CONFIG_ACCELGYRO_BMI3XX
-#define CONFIG_ACCELGYRO_BMI3XX_INT_EVENT \
- TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define CONFIG_ACCEL_INTERRUPTS
-#define CONFIG_ACCEL_BMA4XX
-
-#define I2C_PORT_ACCEL I2C_PORT_SENSOR
-
-/* EC console commands */
-#define CONFIG_CMD_ACCELS
-#define CONFIG_CMD_ACCEL_INFO
-#define CONFIG_CMD_BUTTON
-
-/* USB Type C and USB PD defines */
-#define CONFIG_USB_MUX_ANX7451
-#define CONFIG_USBC_RETIMER_ANX7451
-
-/* USB Type A Features */
-
-/* BC 1.2 */
-
-/* Volume Button feature */
-
-/* Fan features */
-
-/* LED features */
-#define CONFIG_LED_COMMON
-#define CONFIG_LED_ONOFF_STATES
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-/* Motion sensor interrupt */
-void motion_interrupt(enum gpio_signal signal);
-
-/* Battery Types */
-enum battery_type {
- BATTERY_AEC,
- BATTERY_AP18F4M,
- BATTERY_POWER_TECH,
- BATTERY_TYPE_COUNT,
-};
-
-enum base_accelgyro_type {
- BASE_GYRO_NONE = 0,
- BASE_GYRO_BMI160 = 1,
- BASE_GYRO_BMI323 = 2,
-};
-
-/* ADC Channels */
-enum adc_channel {
- ADC_TEMP_SENSOR_SOC = 0,
- ADC_TEMP_SENSOR_CHARGER,
- ADC_TEMP_SENSOR_MEMORY,
- ADC_CORE_IMON1,
- ADC_SOC_IMON2,
- ADC_CH_COUNT
-};
-
-/* Temp Sensors */
-enum temp_sensor_id {
- TEMP_SENSOR_SOC = 0,
- TEMP_SENSOR_CHARGER,
- TEMP_SENSOR_MEMORY,
- TEMP_SENSOR_CPU,
- TEMP_SENSOR_AMBIENT,
- TEMP_SENSOR_COUNT
-};
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/dewatt/board_fw_config.c b/board/dewatt/board_fw_config.c
deleted file mode 100644
index c919d82851..0000000000
--- a/board/dewatt/board_fw_config.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "base_fw_config.h"
-#include "board_fw_config.h"
-
-bool board_is_convertible(void)
-{
- return (get_fw_config_field(FW_CONFIG_FORM_FACTOR_OFFSET,
- FW_CONFIG_FORM_FACTOR_WIDTH)
- == FW_CONFIG_FORM_FACTOR_CONVERTIBLE);
-}
-
-bool board_has_kblight(void)
-{
- return (get_fw_config_field(FW_CONFIG_KBLIGHT_OFFSET,
- FW_CONFIG_KBLIGHT_WIDTH) == FW_CONFIG_KBLIGHT_YES);
-}
-
-enum board_usb_c1_mux board_get_usb_c1_mux(void)
-{
- int usb_db = get_fw_config_field(FW_CONFIG_USB_DB_OFFSET,
- FW_CONFIG_USB_DB_WIDTH);
- if (usb_db == FW_CONFIG_USB_DB_A1_PS8811_C1_PS8818)
- return USB_C1_MUX_PS8818;
- if (usb_db == FW_CONFIG_USB_DB_A1_ANX7491_C1_ANX7451)
- return USB_C1_MUX_ANX7451;
- return USB_C1_MUX_UNKNOWN;
-};
-
-enum board_usb_a1_retimer board_get_usb_a1_retimer(void)
-{
- int usb_db = get_fw_config_field(FW_CONFIG_USB_DB_OFFSET,
- FW_CONFIG_USB_DB_WIDTH);
- if (usb_db == FW_CONFIG_USB_DB_A1_PS8811_C1_PS8818)
- return USB_A1_RETIMER_PS8811;
- if (usb_db == FW_CONFIG_USB_DB_A1_ANX7491_C1_ANX7451)
- return USB_A1_RETIMER_ANX7491;
- return USB_A1_RETIMER_UNKNOWN;
-};
diff --git a/board/dewatt/board_fw_config.h b/board/dewatt/board_fw_config.h
deleted file mode 100644
index 1de417d77a..0000000000
--- a/board/dewatt/board_fw_config.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#ifndef _GUYBRUSH_BOARD_FW_CONFIG__H_
-#define _GUYBRUSH_BOARD_FW_CONFIG__H_
-
-/****************************************************************************
- * Guybrush CBI FW Configuration
- */
-
-/*
- * USB Daughter Board (2 bits)
- */
-#define FW_CONFIG_USB_DB_OFFSET 0
-#define FW_CONFIG_USB_DB_WIDTH 2
-#define FW_CONFIG_USB_DB_A1_PS8811_C1_PS8818 0
-#define FW_CONFIG_USB_DB_A1_ANX7491_C1_ANX7451 1
-
-/*
- * Form Factor (1 bits)
- */
-#define FW_CONFIG_FORM_FACTOR_OFFSET 2
-#define FW_CONFIG_FORM_FACTOR_WIDTH 1
-#define FW_CONFIG_FORM_FACTOR_CLAMSHELL 0
-#define FW_CONFIG_FORM_FACTOR_CONVERTIBLE 1
-
-/*
- * Keyboard Backlight (1 bit)
- */
-#define FW_CONFIG_KBLIGHT_OFFSET 3
-#define FW_CONFIG_KBLIGHT_WIDTH 1
-#define FW_CONFIG_KBLIGHT_NO 0
-#define FW_CONFIG_KBLIGHT_YES 1
-
-
-#endif /* _GUYBRUSH_CBI_FW_CONFIG__H_ */
diff --git a/board/dewatt/build.mk b/board/dewatt/build.mk
deleted file mode 100644
index e4fdcf4afd..0000000000
--- a/board/dewatt/build.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-# -*- makefile -*-
-# Copyright 2021 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-
-BASEBOARD:=guybrush
-
-board-y=board.o
-board-y+=board_fw_config.o led.o battery.o
diff --git a/board/dewatt/ec.tasklist b/board/dewatt/ec.tasklist
deleted file mode 100644
index 94ff657db3..0000000000
--- a/board/dewatt/ec.tasklist
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * See CONFIG_TASK_LIST in config.h for details.
- */
-
-#define CONFIG_TASK_LIST \
- TASK_ALWAYS(HOOKS, hook_task, NULL, LARGER_TASK_STACK_SIZE) \
- TASK_ALWAYS(CHG_RAMP, chg_ramp_task, NULL, TASK_STACK_SIZE) \
- TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, TASK_STACK_SIZE) \
- TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 1, TASK_STACK_SIZE) \
- TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_NOTEST(CHIPSET, chipset_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \
- TASK_ALWAYS(HOSTCMD, host_command_task, NULL, LARGER_TASK_STACK_SIZE) \
- TASK_ALWAYS(POWERBTN, power_button_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, LARGER_TASK_STACK_SIZE) \
- TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, VENTI_TASK_STACK_SIZE) \
- TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, VENTI_TASK_STACK_SIZE)
diff --git a/board/dewatt/gpio.inc b/board/dewatt/gpio.inc
deleted file mode 100644
index 1bab89ed63..0000000000
--- a/board/dewatt/gpio.inc
+++ /dev/null
@@ -1,28 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the board GPIOs that we care about. */
-
-#include "base_gpio.inc"
-
-GPIO_INT(6AXIS_INT_L, PIN(A, 0), GPIO_INT_FALLING | GPIO_PULL_UP, motion_interrupt) /* 6 Axis IMU */
-GPIO_INT(TABLET_MODE, PIN(C, 1), GPIO_INT_BOTH, gmr_tablet_switch_isr) /* 360 Tablet Mode */
-
-/* LED Signals */
-ALTERNATE(/*EC_PWM_LED_CHRG_L*/ PIN_MASK(C, BIT(4)), 0, MODULE_PWM, 0) /* Charging LED */
-ALTERNATE(/*EC_PWM_LED_FULL_L*/ PIN_MASK(8, BIT(0)), 0, MODULE_PWM, 0) /* Full LED */
-
-/* Test Points */
-GPIO(EC_GPIO56, PIN(5, 6), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(EC_PS2_CLK, PIN(6, 7), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(EC_PS2_DAT, PIN(7, 0), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(EC_PS2_RST, PIN(6, 2), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(EC_GPIOB0, PIN(B, 0), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(EC_GPIO81, PIN(8, 1), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(EC_FLPRG2, PIN(8, 6), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(EC_PSL_GPO, PIN(D, 7), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(EC_PWM7, PIN(6, 0), GPIO_INPUT | GPIO_PULL_UP) \ No newline at end of file
diff --git a/board/dewatt/led.c b/board/dewatt/led.c
deleted file mode 100644
index b17c8be488..0000000000
--- a/board/dewatt/led.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Guybrush specific PWM LED settings.
- */
-
-#include "common.h"
-#include "led_onoff_states.h"
-#include "led_common.h"
-#include "gpio.h"
-#include "pwm.h"
-
-/* Note PWM LEDs are active low */
-#define LED_OFF_LVL 1
-#define LED_ON_LVL 0
-
-#define CPRINTS(format, args...) cprints(CC_PWM, format, ## args)
-
-__override const int led_charge_lvl_1 = 5;
-
-__override const int led_charge_lvl_2 = 97;
-
-__override struct led_descriptor
- led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = {
- [STATE_CHARGING_LVL_1] = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} },
- [STATE_CHARGING_LVL_2] = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} },
- [STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} },
- [STATE_DISCHARGE_S0] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} },
- [STATE_DISCHARGE_S3] = {{EC_LED_COLOR_WHITE, 1 * LED_ONE_SEC},
- {LED_OFF, 1 * LED_ONE_SEC} },
- [STATE_DISCHARGE_S5] = {{LED_OFF, LED_INDEFINITE} },
- [STATE_BATTERY_ERROR] = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC},
- {LED_OFF, 1 * LED_ONE_SEC} },
- [STATE_FACTORY_TEST] = {{EC_LED_COLOR_AMBER, 2 * LED_ONE_SEC},
- {EC_LED_COLOR_WHITE, 2 * LED_ONE_SEC} },
-};
-
-const enum ec_led_id supported_led_ids[] = {
- EC_LED_ID_BATTERY_LED,
-};
-
-const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
-
-__override void led_set_color_battery(enum ec_led_colors color)
-{
- switch (color) {
- case EC_LED_COLOR_AMBER:
- pwm_enable(PWM_CH_LED_CHRG, LED_ON_LVL);
- pwm_enable(PWM_CH_LED_FULL, LED_OFF_LVL);
- break;
- case EC_LED_COLOR_WHITE:
- pwm_enable(PWM_CH_LED_CHRG, LED_OFF_LVL);
- pwm_enable(PWM_CH_LED_FULL, LED_ON_LVL);
- break;
- case LED_OFF:
- pwm_enable(PWM_CH_LED_CHRG, LED_OFF_LVL);
- pwm_enable(PWM_CH_LED_FULL, LED_OFF_LVL);
- break;
- default: /* Unsupported colors */
- CPRINTS("Unsupported LED color: %d", color);
- pwm_enable(PWM_CH_LED_CHRG, LED_OFF_LVL);
- pwm_enable(PWM_CH_LED_FULL, LED_OFF_LVL);
- break;
- }
-}
-
-void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
-{
- if (led_id == EC_LED_ID_BATTERY_LED) {
- brightness_range[EC_LED_COLOR_AMBER] = 1;
- brightness_range[EC_LED_COLOR_WHITE] = 1;
- }
-}
-
-int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
-{
- if (led_id == EC_LED_ID_BATTERY_LED) {
- if (brightness[EC_LED_COLOR_WHITE] != 0)
- led_set_color_battery(EC_LED_COLOR_WHITE);
- else if (brightness[EC_LED_COLOR_AMBER] != 0)
- led_set_color_battery(EC_LED_COLOR_AMBER);
- else
- led_set_color_battery(LED_OFF);
- } else {
- CPRINTS("Unsupported LED set: %d", led_id);
- return EC_ERROR_INVAL;
- }
-
- return EC_SUCCESS;
-}
diff --git a/board/dewatt/vif_override.xml b/board/dewatt/vif_override.xml
deleted file mode 100644
index 32736caf64..0000000000
--- a/board/dewatt/vif_override.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File
- Definition from the USB-IF.
--->
View Lorry Controller Status