diff options
Diffstat (limited to 'board/dirinboz/board.c')
| -rw-r--r-- | board/dirinboz/board.c | 84 |
1 files changed, 44 insertions, 40 deletions
diff --git a/board/dirinboz/board.c b/board/dirinboz/board.c index d49f82773b..c6e35cf7e8 100644 --- a/board/dirinboz/board.c +++ b/board/dirinboz/board.c @@ -1,4 +1,4 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. +/* Copyright 2020 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -8,7 +8,7 @@ #include "cros_board_info.h" #include "charge_state.h" #include "driver/bc12/pi3usb9201.h" -#include "driver/ppc/aoz1380.h" +#include "driver/ppc/aoz1380_public.h" #include "driver/ppc/nx20p348x.h" #include "driver/tcpm/nct38xx.h" #include "driver/usb_mux/amd_fp5.h" @@ -35,8 +35,8 @@ #include "usb_pd_tcpm.h" #include "usbc_ppc.h" -#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args) +#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ##args) +#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ##args) /* This I2C moved. Temporarily detect and support the V0 HW. */ int I2C_PORT_BATTERY = I2C_PORT_BATTERY_V1; @@ -98,33 +98,43 @@ const struct usb_mux_driver usbc0_sbu_mux_driver = { * Since PI3USB221 is not a i2c device, .i2c_port and * .i2c_addr_flags are not required here. */ -const struct usb_mux usbc0_sbu_mux = { - .usb_port = USBC_PORT_C0, - .driver = &usbc0_sbu_mux_driver, +const struct usb_mux_chain usbc0_sbu_mux = { + .mux = + &(const struct usb_mux){ + .usb_port = USBC_PORT_C0, + .driver = &usbc0_sbu_mux_driver, + }, }; -struct usb_mux usbc1_amd_fp5_usb_mux = { - .usb_port = USBC_PORT_C1, - .i2c_port = I2C_PORT_USB_AP_MUX, - .i2c_addr_flags = AMD_FP5_MUX_I2C_ADDR_FLAGS, - .driver = &amd_fp5_usb_mux_driver, - .flags = USB_MUX_FLAG_SET_WITHOUT_FLIP, +struct usb_mux_chain usbc1_amd_fp5_usb_mux = { + .mux = + &(const struct usb_mux){ + .usb_port = USBC_PORT_C1, + .i2c_port = I2C_PORT_USB_AP_MUX, + .i2c_addr_flags = AMD_FP5_MUX_I2C_ADDR_FLAGS, + .driver = &amd_fp5_usb_mux_driver, + .flags = USB_MUX_FLAG_SET_WITHOUT_FLIP, + }, }; -struct usb_mux usb_muxes[] = { +struct usb_mux_chain usb_muxes[] = { [USBC_PORT_C0] = { - .usb_port = USBC_PORT_C0, - .i2c_port = I2C_PORT_USB_AP_MUX, - .i2c_addr_flags = AMD_FP5_MUX_I2C_ADDR_FLAGS, - .driver = &amd_fp5_usb_mux_driver, - .next_mux = &usbc0_sbu_mux, + .mux = &(const struct usb_mux) { + .usb_port = USBC_PORT_C0, + .i2c_port = I2C_PORT_USB_AP_MUX, + .i2c_addr_flags = AMD_FP5_MUX_I2C_ADDR_FLAGS, + .driver = &amd_fp5_usb_mux_driver, + }, + .next = &usbc0_sbu_mux, }, [USBC_PORT_C1] = { - .usb_port = USBC_PORT_C1, - .i2c_port = I2C_PORT_TCPC1, - .i2c_addr_flags = PS8743_I2C_ADDR1_FLAG, - .driver = &ps8743_usb_mux_driver, - .next_mux = &usbc1_amd_fp5_usb_mux, + .mux = &(const struct usb_mux) { + .usb_port = USBC_PORT_C1, + .i2c_port = I2C_PORT_TCPC1, + .i2c_addr_flags = PS8743_I2C_ADDR1_FLAG, + .driver = &ps8743_usb_mux_driver, + }, + .next = &usbc1_amd_fp5_usb_mux, } }; BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT); @@ -167,8 +177,7 @@ void ppc_interrupt(enum gpio_signal signal) int board_set_active_charge_port(int port) { - int is_valid_port = (port >= 0 && - port < CONFIG_USB_PD_PORT_MAX_COUNT); + int is_valid_port = (port >= 0 && port < CONFIG_USB_PD_PORT_MAX_COUNT); int i; if (port == CHARGE_PORT_NONE) { @@ -189,7 +198,6 @@ int board_set_active_charge_port(int port) return EC_ERROR_INVAL; } - /* Check if the port is sourcing VBUS. */ if (ppc_is_sourcing_vbus(port)) { CPRINTFUSB("Skip enable C%d", port); @@ -291,7 +299,6 @@ static void reset_nct38xx_port(int port) msleep(NCT3807_RESET_POST_DELAY_MS); } - void board_reset_pd_mcu(void) { /* Reset TCPC0 */ @@ -362,11 +369,9 @@ int board_pd_set_frs_enable(int port, int enable) /* Use the TCPC to enable fast switch when FRS included */ if (port == USBC_PORT_C0) { - rv = ioex_set_level(IOEX_USB_C0_TCPC_FASTSW_CTL_EN, - !!enable); + rv = ioex_set_level(IOEX_USB_C0_TCPC_FASTSW_CTL_EN, !!enable); } else { - rv = ioex_set_level(IOEX_USB_C1_TCPC_FASTSW_CTL_EN, - !!enable); + rv = ioex_set_level(IOEX_USB_C1_TCPC_FASTSW_CTL_EN, !!enable); } return rv; @@ -434,14 +439,13 @@ int usb_port_enable[USBA_PORT_COUNT] = { * The connector has 24 pins total, and there is no pin 0. */ const int keyboard_factory_scan_pins[][2] = { - {0, 5}, {1, 1}, {1, 0}, {0, 6}, {0, 7}, - {1, 4}, {1, 3}, {1, 6}, {1, 7}, {3, 1}, - {2, 0}, {1, 5}, {2, 6}, {2, 7}, {2, 1}, - {2, 4}, {2, 5}, {1, 2}, {2, 3}, {2, 2}, - {3, 0}, {-1, -1}, {-1, -1}, {-1, -1}, + { 0, 5 }, { 1, 1 }, { 1, 0 }, { 0, 6 }, { 0, 7 }, { 1, 4 }, + { 1, 3 }, { 1, 6 }, { 1, 7 }, { 3, 1 }, { 2, 0 }, { 1, 5 }, + { 2, 6 }, { 2, 7 }, { 2, 1 }, { 2, 4 }, { 2, 5 }, { 1, 2 }, + { 2, 3 }, { 2, 2 }, { 3, 0 }, { -1, -1 }, { -1, -1 }, { -1, -1 }, }; const int keyboard_factory_scan_pins_used = - ARRAY_SIZE(keyboard_factory_scan_pins); + ARRAY_SIZE(keyboard_factory_scan_pins); #endif #define CHARGING_CURRENT_500mA 500 @@ -501,13 +505,13 @@ int charger_profile_override(struct charge_state_data *curr) } enum ec_status charger_profile_override_get_param(uint32_t param, - uint32_t *value) + uint32_t *value) { return EC_RES_INVALID_PARAM; } enum ec_status charger_profile_override_set_param(uint32_t param, - uint32_t value) + uint32_t value) { return EC_RES_INVALID_PARAM; } |