diff options
Diffstat (limited to 'board/dratini/board.c')
| -rw-r--r-- | board/dratini/board.c | 119 |
1 files changed, 59 insertions, 60 deletions
diff --git a/board/dratini/board.c b/board/dratini/board.c index 61634d3a7b..84759b74b6 100644 --- a/board/dratini/board.c +++ b/board/dratini/board.c @@ -1,4 +1,4 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. +/* Copyright 2019 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -43,8 +43,8 @@ #include "usbc_ppc.h" #include "util.h" -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) +#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ##args) +#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ##args) static void check_reboot_deferred(void); DECLARE_DEFERRED(check_reboot_deferred); @@ -128,16 +128,16 @@ static void bc12_interrupt(enum gpio_signal signal) /******************************************************************************/ /* SPI devices */ -const struct spi_device_t spi_devices[] = { -}; +const struct spi_device_t spi_devices[] = {}; const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices); /******************************************************************************/ /* PWM channels. Must be in the exactly same order as in enum pwm_channel. */ const struct pwm_t pwm_channels[] = { - [PWM_CH_KBLIGHT] = { .channel = 3, .flags = 0, .freq = 100 }, - [PWM_CH_FAN] = {.channel = 5, .flags = PWM_CONFIG_OPEN_DRAIN, - .freq = 25000}, + [PWM_CH_KBLIGHT] = { .channel = 3, .flags = 0, .freq = 100 }, + [PWM_CH_FAN] = { .channel = 5, + .flags = PWM_CONFIG_OPEN_DRAIN, + .freq = 25000 }, }; BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); @@ -163,16 +163,20 @@ const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { }, }; -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { +const struct usb_mux_chain usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { [USB_PD_PORT_TCPC_0] = { - .usb_port = USB_PD_PORT_TCPC_0, - .driver = &anx7447_usb_mux_driver, - .hpd_update = &anx7447_tcpc_update_hpd_status, + .mux = &(const struct usb_mux) { + .usb_port = USB_PD_PORT_TCPC_0, + .driver = &anx7447_usb_mux_driver, + .hpd_update = &anx7447_tcpc_update_hpd_status, + }, }, [USB_PD_PORT_TCPC_1] = { - .usb_port = USB_PD_PORT_TCPC_1, - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, + .mux = &(const struct usb_mux) { + .usb_port = USB_PD_PORT_TCPC_1, + .driver = &tcpci_tcpm_usb_mux_driver, + .hpd_update = &ps8xxx_tcpc_update_hpd_status, + }, } }; @@ -201,17 +205,13 @@ static struct bmi_drv_data_t g_bmi160_data; static struct accelgyro_saved_data_t g_bma255_data; /* Matrix to rotate accelrator into standard reference frame */ -static const mat33_fp_t base_standard_ref = { - { FLOAT_TO_FP(-1), 0, 0}, - { 0, FLOAT_TO_FP(-1), 0}, - { 0, 0, FLOAT_TO_FP(1)} -}; +static const mat33_fp_t base_standard_ref = { { FLOAT_TO_FP(-1), 0, 0 }, + { 0, FLOAT_TO_FP(-1), 0 }, + { 0, 0, FLOAT_TO_FP(1) } }; -static const mat33_fp_t lid_standard_ref = { - { FLOAT_TO_FP(1), 0, 0}, - { 0, FLOAT_TO_FP(-1), 0}, - { 0, 0, FLOAT_TO_FP(-1)} -}; +static const mat33_fp_t lid_standard_ref = { { FLOAT_TO_FP(1), 0, 0 }, + { 0, FLOAT_TO_FP(-1), 0 }, + { 0, 0, FLOAT_TO_FP(-1) } }; struct motion_sensor_t motion_sensors[] = { [LID_ACCEL] = { @@ -291,7 +291,7 @@ unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors); const struct fan_conf fan_conf_0 = { .flags = FAN_USE_RPM_MODE, - .ch = MFT_CH_0, /* Use MFT id to control fan */ + .ch = MFT_CH_0, /* Use MFT id to control fan */ .pgood_gpio = -1, .enable_gpio = GPIO_EN_PP5000_FAN, }; @@ -310,44 +310,43 @@ const struct fan_t fans[FAN_CH_COUNT] = { /******************************************************************************/ /* MFT channels. These are logically separate from pwm_channels. */ const struct mft_t mft_channels[] = { - [MFT_CH_0] = {NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN}, + [MFT_CH_0] = { NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN }, }; BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); /* ADC channels */ const struct adc_t adc_channels[] = { - [ADC_TEMP_SENSOR_1] = { - "TEMP_CHARGER", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_TEMP_SENSOR_2] = { - "TEMP_5V_REG", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_TEMP_SENSOR_3] = { - "TEMP_CPU", NPCX_ADC_CH2, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, + [ADC_TEMP_SENSOR_1] = { "TEMP_CHARGER", NPCX_ADC_CH0, ADC_MAX_VOLT, + ADC_READ_MAX + 1, 0 }, + [ADC_TEMP_SENSOR_2] = { "TEMP_5V_REG", NPCX_ADC_CH1, ADC_MAX_VOLT, + ADC_READ_MAX + 1, 0 }, + [ADC_TEMP_SENSOR_3] = { "TEMP_CPU", NPCX_ADC_CH2, ADC_MAX_VOLT, + ADC_READ_MAX + 1, 0 }, }; BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); const struct temp_sensor_t temp_sensors[] = { - [TEMP_SENSOR_1] = {.name = "Charger", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_1}, - [TEMP_SENSOR_2] = {.name = "5V Reg", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_2}, - [TEMP_SENSOR_3] = {.name = "CPU", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_3}, + [TEMP_SENSOR_1] = { .name = "Charger", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_30k9_47k_4050b, + .idx = ADC_TEMP_SENSOR_1 }, + [TEMP_SENSOR_2] = { .name = "5V Reg", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_30k9_47k_4050b, + .idx = ADC_TEMP_SENSOR_2 }, + [TEMP_SENSOR_3] = { .name = "CPU", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_30k9_47k_4050b, + .idx = ADC_TEMP_SENSOR_3 }, }; BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); - /* Dratini Temperature sensors */ /* * TODO(b/202062363): Remove when clang is fixed. */ -#define THERMAL_A \ - { \ +#define THERMAL_A \ + { \ .temp_host = { \ [EC_TEMP_THRESH_WARN] = 0, \ [EC_TEMP_THRESH_HIGH] = C_TO_K(73), \ @@ -366,8 +365,8 @@ __maybe_unused static const struct ec_thermal_config thermal_a = THERMAL_A; /* * TODO(b/202062363): Remove when clang is fixed. */ -#define THERMAL_B \ - { \ +#define THERMAL_B \ + { \ .temp_host = { \ [EC_TEMP_THRESH_WARN] = 0, \ [EC_TEMP_THRESH_HIGH] = C_TO_K(68), \ @@ -404,8 +403,8 @@ bool board_is_convertible(void) * Dratini is not. * Unprovisioned SKU 255. */ - return sku_id == 21 || sku_id == 22 || sku_id == 23 || - sku_id == 24 || sku_id == 255; + return sku_id == 21 || sku_id == 22 || sku_id == 23 || sku_id == 24 || + sku_id == 255; } static void board_update_sensor_config_from_sku(void) @@ -485,7 +484,7 @@ bool board_has_kb_backlight(void) * Unprovisioned: 255 */ return sku_id == 2 || sku_id == 3 || sku_id == 5 || sku_id == 8 || - sku_id == 22 || sku_id == 24 || sku_id == 255; + sku_id == 22 || sku_id == 24 || sku_id == 255; } __override uint32_t board_override_feature_flags0(uint32_t flags0) @@ -503,15 +502,15 @@ __override uint32_t board_override_feature_flags0(uint32_t flags0) * The connector has 24 pins total, and there is no pin 0. */ const int keyboard_factory_scan_pins[][2] = { - {-1, -1}, {0, 5}, {1, 1}, {1, 0}, {0, 6}, - {0, 7}, {1, 4}, {1, 3}, {1, 6}, {1, 7}, - {3, 1}, {2, 0}, {1, 5}, {2, 6}, {2, 7}, - {2, 1}, {2, 4}, {2, 5}, {1, 2}, {2, 3}, - {2, 2}, {3, 0}, {-1, -1}, {-1, -1}, {-1, -1}, + { -1, -1 }, { 0, 5 }, { 1, 1 }, { 1, 0 }, { 0, 6 }, + { 0, 7 }, { 1, 4 }, { 1, 3 }, { 1, 6 }, { 1, 7 }, + { 3, 1 }, { 2, 0 }, { 1, 5 }, { 2, 6 }, { 2, 7 }, + { 2, 1 }, { 2, 4 }, { 2, 5 }, { 1, 2 }, { 2, 3 }, + { 2, 2 }, { 3, 0 }, { -1, -1 }, { -1, -1 }, { -1, -1 }, }; const int keyboard_factory_scan_pins_used = - ARRAY_SIZE(keyboard_factory_scan_pins); + ARRAY_SIZE(keyboard_factory_scan_pins); #endif /* Disable HDMI power while AP is suspended / off */ @@ -540,7 +539,7 @@ __override void board_chipset_forced_shutdown(void) hook_call_deferred(&check_reboot_deferred_data, -1); } DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_chipset_forced_shutdown, - HOOK_PRIO_DEFAULT); + HOOK_PRIO_DEFAULT); static void check_reboot_deferred(void) { |