summaryrefslogtreecommitdiff
path: root/board/driblee
diff options
context:
space:
mode:
Diffstat (limited to 'board/driblee')
-rw-r--r--board/driblee/battery.c634
-rw-r--r--board/driblee/board.c497
-rw-r--r--board/driblee/board.h150
-rw-r--r--board/driblee/build.mk14
-rw-r--r--board/driblee/cbi_ssfc.c36
-rw-r--r--board/driblee/cbi_ssfc.h60
-rw-r--r--board/driblee/ec.tasklist21
-rw-r--r--board/driblee/gpio.inc141
-rw-r--r--board/driblee/led.c79
-rw-r--r--board/driblee/usb_pd_policy.c61
-rw-r--r--board/driblee/vif_override.xml3
11 files changed, 0 insertions, 1696 deletions
diff --git a/board/driblee/battery.c b/board/driblee/battery.c
deleted file mode 100644
index ff67e823ff..0000000000
--- a/board/driblee/battery.c
+++ /dev/null
@@ -1,634 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Battery pack vendor provided charging profile
- */
-
-#include "battery_fuel_gauge.h"
-#include "charge_state.h"
-#include "common.h"
-
-/*
- * Battery info for lalala battery types. Note that the fields
- * start_charging_min/max and charging_min/max are not used for the charger.
- * The effective temperature limits are given by discharging_min/max_c.
- *
- * Fuel Gauge (FG) parameters which are used for determining if the battery
- * is connected, the appropriate ship mode (battery cutoff) command, and the
- * charge/discharge FETs status.
- *
- * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
- * register. For some batteries, the charge/discharge FET bits are set when
- * charging/discharging is active, in other types, these bits set mean that
- * charging/discharging is disabled. Therefore, in addition to the mask for
- * these bits, a disconnect value must be specified. Note that for TI fuel
- * gauge, the charge/discharge FET status is found in Operation Status (0x54),
- * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
- * Operation status which contains the FET status bits.
- *
- * The assumption for battery types supported is that the charge/discharge FET
- * status can be read with a sb_read() command and therefore, only the register
- * address, mask, and disconnect value need to be provided.
- */
-const struct board_batt_params board_battery_info[] = {
- /* BYD Battery Information */
- [BATTERY_BYD_1VX1H] = {
- .fuel_gauge = {
- .manuf_name = "BYD",
- .device_name = "DELL 1VX1H",
- .ship_mode = {
- .wb_support = 1,
- .reg_addr = 0x44,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- .cfet_mask = 0x4000,
- .cfet_off_val = 0x4000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
-
- /* BYD Battery Information */
- [BATTERY_BYD_YT39X] = {
- .fuel_gauge = {
- .manuf_name = "BYD",
- .device_name = "DELL YT39X",
- .ship_mode = {
- .wb_support = 1,
- .reg_addr = 0x44,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- .cfet_mask = 0x4000,
- .cfet_off_val = 0x4000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
-
- /* BYD Battery Information */
- [BATTERY_BYD_X0Y5M] = {
- .fuel_gauge = {
- .manuf_name = "BYD",
- .device_name = "DELL X0Y5M",
- .ship_mode = {
- .reg_addr = 0x00,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x043,
- .reg_mask = 0x0001,
- .disconnect_val = 0x0000,
- .cfet_mask = 0x0002,
- .cfet_off_val = 0x0000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
-
- /* LGC Battery Information */
- [BATTERY_LGC_FDRHM] = {
- .fuel_gauge = {
- .manuf_name = "LGC-LGC3.65",
- .device_name = "DELL FDRHM",
- .ship_mode = {
- .wb_support = 1,
- .reg_addr = 0x44,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- .cfet_mask = 0x4000,
- .cfet_off_val = 0x4000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11460,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
-
- /* LGC Battery Information */
- [BATTERY_LGC_8GHCX] = {
- .fuel_gauge = {
- .manuf_name = "LGC-LGC3.65",
- .device_name = "DELL 8GHCX",
- .ship_mode = {
- .wb_support = 1,
- .reg_addr = 0x44,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- .cfet_mask = 0x4000,
- .cfet_off_val = 0x4000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11460,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
-
-
- /* SWD-ATL Battery Information */
- [BATTERY_SWD_ATL_WJPC4] = {
- .fuel_gauge = {
- .manuf_name = "SWD-ATL3.618",
- .device_name = "DELL WJPC4",
- .ship_mode = {
- .wb_support = 1,
- .reg_addr = 0x44,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- .cfet_mask = 0x4000,
- .cfet_off_val = 0x4000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
-
- /* SWD-ATL Battery Information */
- [BATTERY_SWD_ATL_CTGKT] = {
- .fuel_gauge = {
- .manuf_name = "SWD-ATL3.618",
- .device_name = "DELL CTGKT",
- .ship_mode = {
- .wb_support = 1,
- .reg_addr = 0x44,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- .cfet_mask = 0x4000,
- .cfet_off_val = 0x4000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
-
- /* SWD-COS Battery Information */
- [BATTERY_SWD_COS_WJPC4] = {
- .fuel_gauge = {
- .manuf_name = "SWD-COS3.634",
- .device_name = "DELL WJPC4",
- .ship_mode = {
- .wb_support = 1,
- .reg_addr = 0x44,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- .cfet_mask = 0x4000,
- .cfet_off_val = 0x4000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
-
- /* SWD-COS Battery Information */
- [BATTERY_SWD_COS_CTGKT] = {
- .fuel_gauge = {
- .manuf_name = "SWD-COS3.634",
- .device_name = "DELL CTGKT",
- .ship_mode = {
- .wb_support = 1,
- .reg_addr = 0x44,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- .cfet_mask = 0x4000,
- .cfet_off_val = 0x4000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
-
- /* SMP-ATL Battery Information */
- [BATTERY_SMP_ATL_VM732] = {
- .fuel_gauge = {
- .manuf_name = "SMP-ATL-3.61",
- .device_name = "DELL VM732",
- .ship_mode = {
- .wb_support = 1,
- .reg_addr = 0x44,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- .cfet_mask = 0x4000,
- .cfet_off_val = 0x4000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
-
- /* SMP-ATL Battery Information */
- [BATTERY_SMP_ATL_26JGK] = {
- .fuel_gauge = {
- .manuf_name = "SMP-ATL-3.61",
- .device_name = "DELL 26JGK",
- .ship_mode = {
- .wb_support = 1,
- .reg_addr = 0x44,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- .cfet_mask = 0x4000,
- .cfet_off_val = 0x4000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
-
- /* SMP-ATL Battery Information */
- [BATTERY_SMP_ATL_RF9H3] = {
- .fuel_gauge = {
- .manuf_name = "SMP-ATL-3.61",
- .device_name = "DELL RF9H3",
- .ship_mode = {
- .reg_addr = 0x00,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x43,
- .reg_mask = 0x0001,
- .disconnect_val = 0x0000,
- .cfet_mask = 0x0002,
- .cfet_off_val = 0x0000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
-
- /* SMP-COS Battery Information */
- [BATTERY_SMP_COS_VM732] = {
- .fuel_gauge = {
- .manuf_name = "SMP-COS3.63",
- .device_name = "DELL VM732",
- .ship_mode = {
- .wb_support = 1,
- .reg_addr = 0x44,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- .cfet_mask = 0x4000,
- .cfet_off_val = 0x4000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
-
- /* SMP-COS Battery Information */
- [BATTERY_SMP_COS_26JGK] = {
- .fuel_gauge = {
- .manuf_name = "SMP-COS3.63",
- .device_name = "DELL 26JGK",
- .ship_mode = {
- .wb_support = 1,
- .reg_addr = 0x44,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- .cfet_mask = 0x4000,
- .cfet_off_val = 0x4000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
- /* SMP-COS Battery Information */
- [BATTERY_SMP_COS_RF9H3] = {
- .fuel_gauge = {
- .manuf_name = "SMP-COS3.63",
- .device_name = "DELL RF9H3",
- .ship_mode = {
- .reg_addr = 0x00,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x43,
- .reg_mask = 0x0001,
- .disconnect_val = 0x0000,
- .cfet_mask = 0x0002,
- .cfet_off_val = 0x0000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400,
- .voltage_min = 9000,
- .precharge_current = 256, /* mA */
- .start_charging_min_c = -3,
- .start_charging_max_c = 50,
- .charging_min_c = -3,
- .charging_max_c = 60,
- .discharging_min_c = -5,
- .discharging_max_c = 70,
- },
- },
-
- /* BYD 16DPHYMD Battery Information */
- [BATTERY_BYD16] = {
- .fuel_gauge = {
- .manuf_name = "BYD-BYD3.685",
- .ship_mode = {
- .reg_addr = 0x00,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x043,
- .reg_mask = 0x0001,
- .disconnect_val = 0x000,
- .cfet_mask = 0x0002,
- .cfet_off_val = 0x0000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400, /* mV */
- .voltage_min = 9000, /* mV */
- .precharge_current = 256, /* mA */
- .start_charging_min_c = 0,
- .start_charging_max_c = 50,
- .charging_min_c = 0,
- .charging_max_c = 60,
- .discharging_min_c = 0,
- .discharging_max_c = 70,
- },
- },
-
- /* LGC Battery Information */
- [BATTERY_LGC3] = {
- .fuel_gauge = {
- .manuf_name = "LGC-LGC3.553",
- .ship_mode = {
- .reg_addr = 0x00,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x0,
- .reg_mask = 0x2000,
- .disconnect_val = 0x2000,
- .cfet_mask = 0x4000,
- .cfet_off_val = 0x4000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400, /* mV */
- .voltage_min = 9000, /* mV */
- .precharge_current = 256, /* mA */
- .start_charging_min_c = 0,
- .start_charging_max_c = 50,
- .charging_min_c = 0,
- .charging_max_c = 60,
- .discharging_min_c = -20,
- .discharging_max_c = 70,
- },
- },
-
- /* SIMPLO Battery Information */
- [BATTERY_SIMPLO] = {
- .fuel_gauge = {
- .manuf_name = "SMP-SDI3.72",
- .ship_mode = {
- .reg_addr = 0x0,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x043,
- .reg_mask = 0x0001,
- .disconnect_val = 0x000,
- .cfet_mask = 0x0002,
- .cfet_off_val = 0x0000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400, /* mV */
- .voltage_min = 9000, /* mV */
- .precharge_current = 256, /* mA */
- .start_charging_min_c = 0,
- .start_charging_max_c = 50,
- .charging_min_c = 0,
- .charging_max_c = 60,
- .discharging_min_c = -20,
- .discharging_max_c = 70,
- },
- },
-
- /* SIMPLO-LISHEN 7T0D3YMD Battery Information */
- [BATTERY_SIMPLO_LS] = {
- .fuel_gauge = {
- .manuf_name = "SMP-LS3.66",
- .ship_mode = {
- .reg_addr = 0x0,
- .reg_data = { 0x0010, 0x0010 },
- },
- .fet = {
- .reg_addr = 0x043,
- .reg_mask = 0x0001,
- .disconnect_val = 0x000,
- .cfet_mask = 0x0002,
- .cfet_off_val = 0x0000,
- }
- },
- .batt_info = {
- .voltage_max = 13200, /* mV */
- .voltage_normal = 11400, /* mV */
- .voltage_min = 9000, /* mV */
- .precharge_current = 256, /* mA */
- .start_charging_min_c = 0,
- .start_charging_max_c = 50,
- .charging_min_c = 0,
- .charging_max_c = 60,
- .discharging_min_c = 0,
- .discharging_max_c = 70,
- },
- },
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_BYD_1VX1H;
diff --git a/board/driblee/board.c b/board/driblee/board.c
deleted file mode 100644
index d40ebe25a6..0000000000
--- a/board/driblee/board.c
+++ /dev/null
@@ -1,497 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Lalala board-specific configuration */
-
-#include "adc_chip.h"
-#include "button.h"
-#include "cbi_fw_config.h"
-#include "cbi_ssfc.h"
-#include "cbi_fw_config.h"
-#include "charge_manager.h"
-#include "charge_state_v2.h"
-#include "charger.h"
-#include "chipset.h"
-#include "common.h"
-#include "compile_time_macros.h"
-#include "driver/temp_sensor/thermistor.h"
-#include "temp_sensor.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/charger/isl923x.h"
-#include "driver/tcpm/raa489000.h"
-#include "driver/tcpm/tcpci.h"
-#include "driver/usb_mux/pi3usb3x532.h"
-#include "driver/retimer/ps8802.h"
-#include "extpower.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "keyboard_8042.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "stdbool.h"
-#include "switch.h"
-#include "system.h"
-#include "task.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usb_pd_tcpm.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-#define INT_RECHECK_US 5000
-
-#define ADC_VOL_UP_MASK BIT(0)
-#define ADC_VOL_DOWN_MASK BIT(1)
-
-static uint8_t new_adc_key_state;
-
-/******************************************************************************/
-/* USB-A Configuration */
-const int usb_port_enable[USB_PORT_COUNT] = {
- GPIO_EN_USB_A0_VBUS,
-};
-
-/* Keyboard scan setting */
-static const struct ec_response_keybd_config driblee_keybd = {
- /* Default Chromeos keyboard config */
- .num_top_row_keys = 10,
- .action_keys = {
- TK_BACK, /* T1 */
- TK_FORWARD, /* T2 */
- TK_REFRESH, /* T3 */
- TK_FULLSCREEN, /* T4 */
- TK_OVERVIEW, /* T5 */
- TK_BRIGHTNESS_DOWN, /* T6 */
- TK_BRIGHTNESS_UP, /* T7 */
- TK_VOL_MUTE, /* T8 */
- TK_VOL_DOWN, /* T9 */
- TK_VOL_UP, /* T10 */
- },
- /* No function keys, no numeric keypad, has screenlock key */
- .capabilities = KEYBD_CAP_SCRNLOCK_KEY,
-};
-
-__override const struct ec_response_keybd_config
-*board_vivaldi_keybd_config(void)
-{
- return &driblee_keybd;
-}
-
-/* C0 interrupt line shared by BC 1.2 and charger */
-static void check_c0_line(void);
-DECLARE_DEFERRED(check_c0_line);
-
-static void notify_c0_chips(void)
-{
- /*
- * The interrupt line is shared between the TCPC and BC 1.2 detection
- * chip. Therefore we'll need to check both ICs.
- */
- schedule_deferred_pd_interrupt(0);
- task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-}
-
-static void check_c0_line(void)
-{
- /*
- * If line is still being held low, see if there's more to process from
- * one of the chips
- */
- if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
- notify_c0_chips();
- hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
- }
-}
-
-static void usb_c0_interrupt(enum gpio_signal s)
-{
- /* Cancel any previous calls to check the interrupt line */
- hook_call_deferred(&check_c0_line_data, -1);
-
- /* Notify all chips using this line that an interrupt came in */
- notify_c0_chips();
-
- /* Check the line again in 5ms */
- hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
-
-}
-
-static void sub_hdmi_hpd_interrupt(enum gpio_signal s)
-{
- int hdmi_hpd_odl = gpio_get_level(GPIO_EC_I2C_SUB_C1_SDA_HDMI_HPD_ODL);
-
- gpio_set_level(GPIO_EC_AP_USB_C1_HDMI_HPD, !hdmi_hpd_odl);
-}
-
-static void c0_ccsbu_ovp_interrupt(enum gpio_signal s)
-{
- cprints(CC_USBPD, "C0: CC OVP, SBU OVP, or thermal event");
- pd_handle_cc_overvoltage(0);
-}
-
-#include "gpio_list.h"
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
- [ADC_TEMP_SENSOR_1] = {
- .name = "TEMP_SENSOR1",
- .input_ch = NPCX_ADC_CH0,
- .factor_mul = ADC_MAX_VOLT,
- .factor_div = ADC_READ_MAX + 1,
- .shift = 0,
- },
- [ADC_TEMP_SENSOR_2] = {
- .name = "TEMP_SENSOR2",
- .input_ch = NPCX_ADC_CH1,
- .factor_mul = ADC_MAX_VOLT,
- .factor_div = ADC_READ_MAX + 1,
- .shift = 0,
- },
- [ADC_VSNS_PP3300_A] = {
- .name = "PP3300_A_PGOOD",
- .input_ch = NPCX_ADC_CH9,
- .factor_mul = ADC_MAX_VOLT,
- .factor_div = ADC_READ_MAX + 1,
- .shift = 0,
- },
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/* Thermistors */
-const struct temp_sensor_t temp_sensors[] = {
- [TEMP_SENSOR_1] = {.name = "Memory",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = get_temp_3v3_51k1_47k_4050b,
- .idx = ADC_TEMP_SENSOR_1},
- [TEMP_SENSOR_2] = {.name = "Charger",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = get_temp_3v3_51k1_47k_4050b,
- .idx = ADC_TEMP_SENSOR_2},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-const static struct ec_thermal_config thermal_a = {
- .temp_host = {
- [EC_TEMP_THRESH_WARN] = 0,
- [EC_TEMP_THRESH_HIGH] = C_TO_K(70),
- [EC_TEMP_THRESH_HALT] = C_TO_K(85),
- },
- .temp_host_release = {
- [EC_TEMP_THRESH_WARN] = 0,
- [EC_TEMP_THRESH_HIGH] = C_TO_K(65),
- [EC_TEMP_THRESH_HALT] = 0,
- },
-};
-
-const static struct ec_thermal_config thermal_b = {
- .temp_host = {
- [EC_TEMP_THRESH_WARN] = 0,
- [EC_TEMP_THRESH_HIGH] = C_TO_K(73),
- [EC_TEMP_THRESH_HALT] = C_TO_K(85),
- },
- .temp_host_release = {
- [EC_TEMP_THRESH_WARN] = 0,
- [EC_TEMP_THRESH_HIGH] = C_TO_K(65),
- [EC_TEMP_THRESH_HALT] = 0,
- },
-};
-
-struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT];
-
-static void setup_thermal(void)
-{
- thermal_params[TEMP_SENSOR_1] = thermal_a;
- thermal_params[TEMP_SENSOR_2] = thermal_b;
-}
-
-void board_hibernate(void)
-{
- /*
- * Both charger ICs need to be put into their "low power mode" before
- * entering the Z-state.
- */
- if (board_get_charger_chip_count() > 1)
- raa489000_hibernate(1, true);
- raa489000_hibernate(0, true);
-}
-
-void board_reset_pd_mcu(void)
-{
- /*
- * TODO(b:147316511): Here we could issue a digital reset to the IC,
- * unsure if we actually want to do that or not yet.
- */
-}
-
-static void set_5v_gpio(int level)
-{
- gpio_set_level(GPIO_EN_PP5000, level);
- gpio_set_level(GPIO_EN_USB_A0_VBUS, level);
-}
-
-__override void board_power_5v_enable(int enable)
-{
- /*
- * Port 0 simply has a GPIO to turn on the 5V regulator, however, 5V is
- * generated locally on the sub board and we need to set the comparator
- * polarity on the sub board charger IC.
- */
- set_5v_gpio(!!enable);
-}
-
-__override uint8_t board_get_usb_pd_port_count(void)
-{
- return CONFIG_USB_PD_PORT_MAX_COUNT;
-}
-
-__override uint8_t board_get_charger_chip_count(void)
-{
- return CHARGER_NUM;
-}
-
-int board_is_sourcing_vbus(int port)
-{
- int regval;
-
- tcpc_read(port, TCPC_REG_POWER_STATUS, &regval);
- return !!(regval & TCPC_REG_POWER_STATUS_SOURCING_VBUS);
-
-}
-
-int board_set_active_charge_port(int port)
-{
- int is_real_port = (port >= 0 &&
- port < board_get_usb_pd_port_count());
- int i;
- int old_port;
-
- if (!is_real_port && port != CHARGE_PORT_NONE)
- return EC_ERROR_INVAL;
-
- old_port = charge_manager_get_active_charge_port();
-
- CPRINTS("New chg p%d", port);
-
- /* Disable all ports. */
- if (port == CHARGE_PORT_NONE) {
- for (i = 0; i < board_get_usb_pd_port_count(); i++) {
- tcpc_write(i, TCPC_REG_COMMAND,
- TCPC_REG_COMMAND_SNK_CTRL_LOW);
- raa489000_enable_asgate(i, false);
- }
-
- return EC_SUCCESS;
- }
-
- /* Check if port is sourcing VBUS. */
- if (board_is_sourcing_vbus(port)) {
- CPRINTS("Skip enable p%d", port);
- return EC_ERROR_INVAL;
- }
-
- /*
- * Turn off the other ports' sink path FETs, before enabling the
- * requested charge port.
- */
- for (i = 0; i < board_get_usb_pd_port_count(); i++) {
- if (i == port)
- continue;
-
- if (tcpc_write(i, TCPC_REG_COMMAND,
- TCPC_REG_COMMAND_SNK_CTRL_LOW))
- CPRINTS("p%d: sink path disable failed.", i);
- raa489000_enable_asgate(i, false);
- }
-
- /*
- * Stop the charger IC from switching while changing ports. Otherwise,
- * we can overcurrent the adapter we're switching to. (crbug.com/926056)
- */
- if (old_port != CHARGE_PORT_NONE)
- charger_discharge_on_ac(1);
-
- /* Enable requested charge port. */
- if (raa489000_enable_asgate(port, true) ||
- tcpc_write(port, TCPC_REG_COMMAND,
- TCPC_REG_COMMAND_SNK_CTRL_HIGH)) {
- CPRINTS("p%d: sink path enable failed.", port);
- charger_discharge_on_ac(0);
- return EC_ERROR_UNKNOWN;
- }
-
- /* Allow the charger IC to begin/continue switching. */
- charger_discharge_on_ac(0);
-
- return EC_SUCCESS;
-}
-
-void board_set_charge_limit(int port, int supplier, int charge_ma,
- int max_ma, int charge_mv)
-{
- int icl = MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT);
-
- /*
- * b/147463641: The charger IC seems to overdraw ~4%, therefore we
- * reduce our target accordingly.
- */
- icl = icl * 96 / 100;
- charge_set_input_current_limit(icl, charge_mv);
-}
-
-__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp)
-{
- if (port < 0 || port > board_get_usb_pd_port_count())
- return;
-
- raa489000_set_output_current(port, rp);
-}
-
-void board_init(void)
-{
- int on;
-
- gpio_enable_interrupt(GPIO_USB_C0_INT_ODL);
- check_c0_line();
-
- /* Turn on 5V if the system is on, otherwise turn it off. */
- on = chipset_in_state(CHIPSET_STATE_ON | CHIPSET_STATE_ANY_SUSPEND |
- CHIPSET_STATE_SOFT_OFF);
- board_power_5v_enable(on);
-
- /* Initialize THERMAL */
- setup_thermal();
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-/* Enable HDMI any time the SoC is on */
-static void hdmi_enable(void)
-{
- if (get_cbi_fw_config_hdmi() == HDMI_PRESENT) {
- gpio_set_level(GPIO_EC_HDMI_EN_ODL, 0);
- gpio_set_level(GPIO_HDMI_PP3300_EN, 1);
- }
-}
-DECLARE_HOOK(HOOK_CHIPSET_STARTUP, hdmi_enable, HOOK_PRIO_DEFAULT);
-
-static void hdmi_disable(void)
-{
- if (get_cbi_fw_config_hdmi() == HDMI_PRESENT) {
- gpio_set_level(GPIO_EC_HDMI_EN_ODL, 1);
- gpio_set_level(GPIO_HDMI_PP3300_EN, 0);
- }
-}
-DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, hdmi_disable, HOOK_PRIO_DEFAULT);
-
-__override void ocpc_get_pid_constants(int *kp, int *kp_div,
- int *ki, int *ki_div,
- int *kd, int *kd_div)
-{
- *kp = 1;
- *kp_div = 20;
- *ki = 1;
- *ki_div = 250;
- *kd = 0;
- *kd_div = 1;
-}
-
-int pd_snk_is_vbus_provided(int port)
-{
- return pd_check_vbus_level(port, VBUS_PRESENT);
-}
-
-const struct charger_config_t chg_chips[] = {
- {
- .i2c_port = I2C_PORT_USB_C0,
- .i2c_addr_flags = ISL923X_ADDR_FLAGS,
- .drv = &isl923x_drv,
- },
-};
-const unsigned int chg_cnt = ARRAY_SIZE(chg_chips);
-
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
- {
- .i2c_port = I2C_PORT_USB_C0,
- .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
- .flags = PI3USB9201_ALWAYS_POWERED,
- },
-};
-
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
- {
- .bus_type = EC_BUS_TYPE_I2C,
- .i2c_info = {
- .port = I2C_PORT_USB_C0,
- .addr_flags = RAA489000_TCPC0_I2C_FLAGS,
- },
- .flags = TCPC_FLAGS_TCPCI_REV2_0,
- .drv = &raa489000_tcpm_drv,
- },
-};
-
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
- {
- .usb_port = 0,
- .i2c_port = I2C_PORT_USB_C0,
- .i2c_addr_flags = PI3USB3X532_I2C_ADDR0,
- .driver = &pi3usb3x532_usb_mux_driver,
- },
-};
-
-uint16_t tcpc_get_alert_status(void)
-{
- uint16_t status = 0;
- int regval;
-
- /*
- * The interrupt line is shared between the TCPC and BC1.2 detector IC.
- * Therefore, go out and actually read the alert registers to report the
- * alert status.
- */
- if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
- if (!tcpc_read16(0, TCPC_REG_ALERT, &regval)) {
- /* The TCPCI Rev 1.0 spec says to ignore bits 14:12. */
- if (!(tcpc_config[0].flags & TCPC_FLAGS_TCPCI_REV2_0))
- regval &= ~((1 << 14) | (1 << 13) | (1 << 12));
-
- if (regval)
- status |= PD_STATUS_TCPC_ALERT_0;
- }
- }
-
- return status;
-}
-
-int adc_to_physical_value(enum gpio_signal gpio)
-{
- if (gpio == GPIO_VOLUME_UP_L)
- return !!(new_adc_key_state & ADC_VOL_UP_MASK);
- else if (gpio == GPIO_VOLUME_DOWN_L)
- return !!(new_adc_key_state & ADC_VOL_DOWN_MASK);
-
- CPRINTS("Not a volume up or down key");
- return 0;
-}
-
-int button_is_adc_detected(enum gpio_signal gpio)
-{
- return (gpio == GPIO_VOLUME_DOWN_L) || (gpio == GPIO_VOLUME_UP_L);
-}
-
-static void board_extpower(void)
-{
- int extpower_present;
-
- if (pd_is_connected(0))
- extpower_present = extpower_is_present();
- else
- extpower_present = 0;
-
- gpio_set_level(GPIO_EC_ACOK_OTG, extpower_present);
-}
-DECLARE_HOOK(HOOK_AC_CHANGE, board_extpower, HOOK_PRIO_DEFAULT);
diff --git a/board/driblee/board.h b/board/driblee/board.h
deleted file mode 100644
index 9d4ce3b6f2..0000000000
--- a/board/driblee/board.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Lalala board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-#define VARIANT_KEEBY_EC_NPCX797FC
-#include "baseboard.h"
-
-/*
- * The RAM and flash size combination on the the NPCX797FC does not leave
- * any unused flash space that can be used to store the .init_rom section.
- */
-#undef CONFIG_CHIP_INIT_ROM_REGION
-
-/* Battery */
-#define CONFIG_BATTERY_FUEL_GAUGE
-#define CONFIG_BATTERY_V2
-#define CONFIG_BATTERY_COUNT 1
-#define CONFIG_HOSTCMD_BATTERY_V2
-
-/* Charger */
-#define CONFIG_CHARGER_RAA489000
-#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10
-#define CONFIG_CHARGER_SENSE_RESISTOR 10
-#undef CONFIG_CMD_CHARGER_DUMP
-#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE
-#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (100 * MSEC)
-#define CONFIG_MATH_UTIL
-
-/*
- * GPIO for C1 interrupts, for baseboard use
- *
- * Note this line might already have its pull up disabled for HDMI DBs, but
- * it should be fine to set again before z-state.
- */
-#define GPIO_EC_HDMI_EN_ODL GPIO_EC_I2C_SBU_USB_C1_SCL
-#define GPIO_HDMI_PP3300_EN GPIO_SUB_USB_C1_INT_ODL
-
-/* LED defines */
-#define CONFIG_LED_ONOFF_STATES
-#define CONFIG_LED_COMMON
-#define CONFIG_LED_ONOFF_STATES_BAT_LOW 10
-
-/* PWM */
-#define NPCX7_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */
-
-/* Temp sensor */
-#define CONFIG_TEMP_SENSOR
-#define CONFIG_THERMISTOR
-#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B
-
-/* USB */
-#define CONFIG_BC12_DETECT_PI3USB9201
-#define CONFIG_USBC_RETIMER_PS8802
-
-/* Common USB-A defines */
-#define USB_PORT_COUNT 1
-#define CONFIG_USB_PORT_POWER_SMART
-#undef CONFIG_USB_PORT_POWER_SMART_PORT_COUNT
-#define CONFIG_USB_PORT_POWER_SMART_PORT_COUNT 1
-#define CONFIG_USB_PORT_POWER_SMART_CDP_SDP_ONLY
-#define CONFIG_USB_PORT_POWER_SMART_DEFAULT_MODE USB_CHARGE_MODE_CDP
-#define CONFIG_USB_PORT_POWER_SMART_INVERTED
-#define GPIO_USB1_ILIM_SEL GPIO_USB_A0_CHARGE_EN_L
-
-/******************************************************************************/
-
-/* USB PD */
-#define CONFIG_USB_PD_PORT_MAX_COUNT 1
-#define CONFIG_USB_PD_TCPM_RAA489000
-
-/* USB defines specific to external TCPCs */
-#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
-#define CONFIG_USB_PD_VBUS_DETECT_TCPC
-#define CONFIG_USB_PD_DISCHARGE_TCPC
-#define CONFIG_USB_PD_TCPC_LOW_POWER
-
-/* Variant references the TCPCs to determine Vbus sourcing */
-#define CONFIG_USB_PD_5V_EN_CUSTOM
-
-/* I2C configuration */
-#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0
-#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0
-#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0
-#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0
-#define I2C_PORT_SUB_USB_C1 NPCX_I2C_PORT2_0
-#define I2C_PORT_USB_MUX I2C_PORT_USB_C0
-/* TODO(b:147440290): Need to handle multiple charger ICs */
-#define I2C_PORT_CHARGER I2C_PORT_USB_C0
-
-#define I2C_PORT_ACCEL I2C_PORT_SENSOR
-
-#define I2C_ADDR_EEPROM_FLAGS 0x50 /* 7b address */
-
-/* Volume Button feature */
-#define CONFIG_ADC_BUTTONS
-#define CONFIG_VOLUME_BUTTONS
-#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL
-#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-enum adc_channel {
- ADC_TEMP_SENSOR_1, /* ADC0 */
- ADC_TEMP_SENSOR_2, /* ADC1 */
- ADC_VSNS_PP3300_A, /* ADC9 */
- ADC_CH_COUNT
-};
-
-enum temp_sensor_id {
- TEMP_SENSOR_1,
- TEMP_SENSOR_2,
- TEMP_SENSOR_COUNT
-};
-
-/* List of possible batteries */
-enum battery_type {
- BATTERY_BYD_1VX1H,
- BATTERY_BYD_YT39X,
- BATTERY_BYD_X0Y5M,
- BATTERY_LGC_FDRHM,
- BATTERY_LGC_8GHCX,
- BATTERY_SWD_ATL_WJPC4,
- BATTERY_SWD_ATL_CTGKT,
- BATTERY_SWD_COS_WJPC4,
- BATTERY_SWD_COS_CTGKT,
- BATTERY_SMP_ATL_VM732,
- BATTERY_SMP_ATL_26JGK,
- BATTERY_SMP_ATL_RF9H3,
- BATTERY_SMP_COS_VM732,
- BATTERY_SMP_COS_26JGK,
- BATTERY_SMP_COS_RF9H3,
- BATTERY_BYD16,
- BATTERY_LGC3,
- BATTERY_SIMPLO,
- BATTERY_SIMPLO_LS,
- BATTERY_TYPE_COUNT,
-};
-
-int board_is_sourcing_vbus(int port);
-#endif /* !__ASSEMBLER__ */
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/driblee/build.mk b/board/driblee/build.mk
deleted file mode 100644
index b012d8d502..0000000000
--- a/board/driblee/build.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-# -*- makefile -*-
-# Copyright 2021 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-
-CHIP:=npcx
-CHIP_FAMILY:=npcx7
-CHIP_VARIANT:=npcx7m7fc
-BASEBOARD:=keeby
-
-board-y=board.o battery.o cbi_ssfc.o led.o usb_pd_policy.o
diff --git a/board/driblee/cbi_ssfc.c b/board/driblee/cbi_ssfc.c
deleted file mode 100644
index c4b859f133..0000000000
--- a/board/driblee/cbi_ssfc.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "cbi_ssfc.h"
-#include "common.h"
-#include "console.h"
-#include "cros_board_info.h"
-#include "hooks.h"
-
-#define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ##args)
-
-/* Cache SSFC on init since we don't expect it to change in runtime */
-static union dedede_cbi_ssfc cached_ssfc;
-BUILD_ASSERT(sizeof(cached_ssfc) == sizeof(uint32_t));
-
-static void cbi_ssfc_init(void)
-{
- if (cbi_get_ssfc(&cached_ssfc.raw_value) != EC_SUCCESS)
- /* Default to 0 when CBI isn't populated */
- cached_ssfc.raw_value = 0;
-
- CPRINTS("Read CBI SSFC : 0x%04X", cached_ssfc.raw_value);
-}
-DECLARE_HOOK(HOOK_INIT, cbi_ssfc_init, HOOK_PRIO_FIRST);
-
-enum ec_ssfc_base_sensor get_cbi_ssfc_base_sensor(void)
-{
- return (enum ec_ssfc_base_sensor) cached_ssfc.base_sensor;
-}
-
-enum ec_ssfc_lid_sensor get_cbi_ssfc_lid_sensor(void)
-{
- return (enum ec_ssfc_lid_sensor) cached_ssfc.lid_sensor;
-}
diff --git a/board/driblee/cbi_ssfc.h b/board/driblee/cbi_ssfc.h
deleted file mode 100644
index 935049b6ae..0000000000
--- a/board/driblee/cbi_ssfc.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#ifndef _DEDEDE_CBI_SSFC__H_
-#define _DEDEDE_CBI_SSFC__H_
-
-#include "stdint.h"
-
-/****************************************************************************
- * Dedede CBI Second Source Factory Cache
- */
-
-/*
- * Base Sensor (Bits 0-2)
- */
-enum ec_ssfc_base_sensor {
- SSFC_SENSOR_BASE_DEFAULT = 0,
- SSFC_SENSOR_BMI160 = 1,
- SSFC_SENSOR_ICM426XX = 2,
- SSFC_SENSOR_LSM6DSM = 3,
- SSFC_SENSOR_ICM42607 = 4
-};
-
-/*
- * Lid Sensor (Bits 3-5)
- */
-enum ec_ssfc_lid_sensor {
- SSFC_SENSOR_LID_DEFAULT = 0,
- SSFC_SENSOR_BMA255 = 1,
- SSFC_SENSOR_KX022 = 2,
- SSFC_SENSOR_LIS2DWL = 3
-};
-
-union dedede_cbi_ssfc {
- struct {
- uint32_t base_sensor : 3;
- uint32_t lid_sensor : 3;
- uint32_t reserved_2 : 26;
- };
- uint32_t raw_value;
-};
-
-/**
- * Get the Base sensor type from SSFC_CONFIG.
- *
- * @return the Base sensor board type.
- */
-enum ec_ssfc_base_sensor get_cbi_ssfc_base_sensor(void);
-
-/**
- * Get the Lid sensor type from SSFC_CONFIG.
- *
- * @return the Lid sensor board type.
- */
-enum ec_ssfc_lid_sensor get_cbi_ssfc_lid_sensor(void);
-
-
-#endif /* _DEDEDE_CBI_SSFC__H_ */
diff --git a/board/driblee/ec.tasklist b/board/driblee/ec.tasklist
deleted file mode 100644
index 0025c2985b..0000000000
--- a/board/driblee/ec.tasklist
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * See CONFIG_TASK_LIST in config.h for details.
- */
-
-#define CONFIG_TASK_LIST \
- TASK_ALWAYS(HOOKS, hook_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, LARGER_TASK_STACK_SIZE) \
- TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_NOTEST(CHIPSET, chipset_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \
- TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_ALWAYS(HOSTCMD, host_command_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_ALWAYS(POWERBTN, power_button_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_ALWAYS(PD_C0, pd_task, NULL, ULTRA_TASK_STACK_SIZE) \
- TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, ULTRA_TASK_STACK_SIZE)
diff --git a/board/driblee/gpio.inc b/board/driblee/gpio.inc
deleted file mode 100644
index 82ba0d67bc..0000000000
--- a/board/driblee/gpio.inc
+++ /dev/null
@@ -1,141 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first.
- */
-
-/* Power Interrupts */
-GPIO_INT(SLP_S0_L, PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(SLP_S3_L, PIN(A, 5), GPIO_INT_BOTH, baseboard_all_sys_pgood_interrupt)
-GPIO_INT(SLP_S4_L, PIN(D, 4), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(SLP_SUS_L, PIN(D, 7), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(RSMRST_PWRGD_L, PIN(C, 6), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(VCCIN_AUX_VID1, PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(CPU_C10_GATE_L, PIN(6, 7), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(VCCIN_AUX_VID0, PIN(F, 4), GPIO_INT_BOTH | GPIO_SEL_1P8V, power_signal_interrupt)
-GPIO_INT(PG_VCCIO_EXT_OD, PIN(B, 0), GPIO_INT_BOTH, baseboard_all_sys_pgood_interrupt)
-GPIO_INT(PG_PP5000_U_OD, PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(PG_DRAM_OD, PIN(E, 4), GPIO_INT_BOTH, baseboard_all_sys_pgood_interrupt)
-GPIO_INT(PG_PP1050_ST_OD, PIN(4, 2), GPIO_INT_BOTH, power_signal_interrupt)
-
-/* USB-C interrupts */
-GPIO_INT(USB_C0_INT_ODL, PIN(6, 2), GPIO_INT_FALLING | GPIO_PULL_UP, usb_c0_interrupt)
-GPIO_INT(EC_I2C_SUB_C1_SDA_HDMI_HPD_ODL, PIN(9, 1), GPIO_INT_BOTH, sub_hdmi_hpd_interrupt) /* HDMI_HPD */
-GPIO_INT(USB_C0_CCSBU_OVP_ODL, PIN(A, 2), GPIO_INT_FALLING | GPIO_PULL_UP, c0_ccsbu_ovp_interrupt) /* Fault protection */
-
-/* Button interrupts */
-GPIO_INT(EC_PWR_BTN_ODL, PIN(0, 1), GPIO_INT_BOTH | GPIO_PULL_UP, power_button_interrupt)
-
-/* Other interrupts */
-GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH, lid_interrupt)
-GPIO_INT(EC_WP_OD, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt)
-
-/* I2C Ports */
-GPIO(EC_I2C_EEPROM_SCL, PIN(B, 3), GPIO_INPUT)
-GPIO(EC_I2C_EEPROM_SDA, PIN(B, 2), GPIO_INPUT)
-GPIO(EC_I2C_BATTERY_SCL, PIN(3, 3), GPIO_INPUT)
-GPIO(EC_I2C_BATTERY_SDA, PIN(3, 6), GPIO_INPUT)
-GPIO(EC_I2C_SENSOR_SCL, PIN(B, 5), GPIO_INPUT)
-GPIO(EC_I2C_SENSOR_SDA, PIN(B, 4), GPIO_INPUT)
-GPIO(EC_I2C_USB_C0_SCL, PIN(9, 0), GPIO_INPUT)
-GPIO(EC_I2C_USB_C0_SDA, PIN(8, 7), GPIO_INPUT)
-
-/* Misc Enables */
-GPIO(EN_VCCIO_EXT, PIN(6, 1), GPIO_OUT_LOW)
-/* TODO(b:149775160) - Modify if needed if we ever use this signal. */
-GPIO(EN_VCCST, PIN(A, 7), GPIO_INPUT)
-GPIO(EN_PP3300_A, PIN(0, 3), GPIO_OUT_LOW)
-GPIO(EN_PP5000_U, PIN(A, 4), GPIO_OUT_LOW)
-GPIO(EN_SLP_Z, PIN(8, 3), GPIO_OUT_LOW)
-GPIO(EN_BL_OD, PIN(D, 3), GPIO_ODR_LOW)
-GPIO(EC_CBI_WP, PIN(E, 5), GPIO_OUT_LOW)
-GPIO(SUB_USB_C1_INT_ODL, PIN(F, 5), GPIO_OUT_LOW) /* 5V power en */
-GPIO(EC_I2C_SBU_USB_C1_SCL, PIN(9, 2), GPIO_ODR_LOW) /* HDMI en */
-
-/* LED */
-GPIO(LED_1_PWR_WHITE_L, PIN(C, 3), GPIO_OUT_HIGH)
-GPIO(LED_2_CHG_AMBER_L, PIN(C, 4), GPIO_OUT_HIGH)
-
-/* Power Sequencing */
-GPIO(EC_AP_PSYS, PIN(B, 7), GPIO_OUT_LOW)
-GPIO(EC_AP_RSMRST_L, PIN(A, 6), GPIO_OUT_LOW)
-GPIO(EC_AP_PWR_BTN_ODL, PIN(C, 1), GPIO_ODR_HIGH)
-GPIO(EC_AP_RTCRST, PIN(7, 6), GPIO_OUT_LOW)
-GPIO(EC_AP_WAKE_ODL, PIN(7, 4), GPIO_ODR_HIGH)
-GPIO(EC_AP_DPWROK, PIN(A, 3), GPIO_OUT_LOW)
-GPIO(EC_AP_PCH_PWROK_OD, PIN(9, 4), GPIO_ODR_LOW)
-GPIO(EC_AP_VCCST_PWRGD_OD, PIN(B, 1), GPIO_ODR_LOW)
-GPIO(EC_AP_SYS_PWROK, PIN(0, 2), GPIO_OUT_LOW)
-GPIO(EC_AP_MKBP_INT_L, PIN(7, 0), GPIO_ODR_HIGH)
-GPIO(EC_PROCHOT_ODL, PIN(F, 1), GPIO_ODR_HIGH | GPIO_SEL_1P8V)
-GPIO(EC_ENTERING_RW, PIN(E, 3), GPIO_OUT_LOW)
-GPIO(ALL_SYS_PWRGD, PIN(A, 0), GPIO_OUT_LOW)
-GPIO(SYS_RST_ODL, PIN(C, 5), GPIO_ODR_HIGH)
-
-/* USB pins */
-GPIO(EC_AP_USB_C1_HDMI_HPD, PIN(9, 6), GPIO_OUT_LOW)
-GPIO(EC_AP_USB_C0_HPD, PIN(9, 3), GPIO_OUT_LOW)
-GPIO(EC_BATTERY_PRES_ODL, PIN(E, 1), GPIO_INPUT)
-GPIO(EN_USB_A0_VBUS, PIN(4, 1), GPIO_OUT_LOW) /* Enable A0 5V Charging */
-GPIO(USB_A0_CHARGE_EN_L, PIN(6, 3), GPIO_OUT_HIGH) /* Reverse: Enable A0 1.5A Charging */
-/*
- * Lalala doesn't have these physical pins coming to the EC but uses other
- * logic.
- */
-UNIMPLEMENTED(AC_PRESENT)
-UNIMPLEMENTED(PG_EC_DSW_PWROK)
-UNIMPLEMENTED(PG_EC_ALL_SYS_PWRGD)
-UNIMPLEMENTED(VOLDN_BTN_ODL)
-UNIMPLEMENTED(VOLUP_BTN_ODL)
-
-/* Alternate Functions */
-/* ADC */
-ALTERNATE(PIN_MASK(F, BIT(0)), 0, MODULE_ADC, 0) /* ADC9 */
-ALTERNATE(PIN_MASK(4, 0x30), 0, MODULE_ADC, 0) /* ADC0-1 */
-
-/* Keyboard */
-ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT | GPIO_PULL_UP) /* KSI0, KSI1 */
-ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT | GPIO_PULL_UP) /* KSI2-7 */
-ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO0, KSO1 */
-ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO3-9 */
-ALTERNATE(PIN_MASK(0, 0xF0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO10-13 */
-ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO14 */
-GPIO(EC_KSO_02_INV, PIN(1, 7), GPIO_OUT_LOW) /* KSO2 inverted */
-
-/* UART */
-ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* UART1 */
-
-/* I2C */
-ALTERNATE(PIN_MASK(B, 0x3C), 0, MODULE_I2C, 0) /* I2C7,I2C0 */
-ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0) /* I2C5 */
-ALTERNATE(PIN_MASK(9, 0x01), 0, MODULE_I2C, 0) /* I2C2, I2C1 SCL */
-ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0) /* I2C1 SDA */
-
-GPIO(EC_ACOK_OTG, PIN(C, 0), GPIO_OUT_LOW) /* OTG-OVP protect enable */
-
-/* NC pins, enable internal pull-up to avoid floating state. */
-GPIO(GPIO32_NC, PIN(3, 2), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIO35_NC, PIN(3, 5), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIO43_NC, PIN(4, 3), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIO57_NC, PIN(5, 7), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIO81_NC, PIN(8, 1), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIO86_NC, PIN(8, 6), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIOD0_NC, PIN(D, 0), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIOD1_NC, PIN(D, 1), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIOD6_NC, PIN(D, 6), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIOE0_NC, PIN(E, 0), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIO40_NC, PIN(4, 0), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIO50_NC, PIN(5, 0), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIO34_NC, PIN(3, 4), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIO37_NC, PIN(3, 7), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIOF2_NC, PIN(F, 2), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIOF3_NC, PIN(F, 3), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIO72_NC, PIN(7, 2), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIO73_NC, PIN(7, 3), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(GPIO75_NC, PIN(7, 5), GPIO_INPUT | GPIO_PULL_UP)
diff --git a/board/driblee/led.c b/board/driblee/led.c
deleted file mode 100644
index cd34613a7c..0000000000
--- a/board/driblee/led.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Power and battery LED control for lalala
- */
-
-#include "ec_commands.h"
-#include "gpio.h"
-#include "led_common.h"
-#include "led_onoff_states.h"
-#include "chipset.h"
-
-#define LED_ON_LVL 0
-#define LED_OFF_LVL 1
-
-__override const int led_charge_lvl_1 = 10;
-
-__override const int led_charge_lvl_2 = 100;
-
-__override struct led_descriptor
- led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = {
- [STATE_CHARGING_LVL_1] = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC},
- {LED_OFF, 1 * LED_ONE_SEC} },
- [STATE_CHARGING_LVL_2] = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} },
- [STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} },
- [STATE_CHARGING_FULL_S5] = {{LED_OFF, LED_INDEFINITE} },
- [STATE_DISCHARGE_S0] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} },
- [STATE_DISCHARGE_S0_BAT_LOW] = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC},
- {LED_OFF, 1 * LED_ONE_SEC} },
- [STATE_DISCHARGE_S3] = {{EC_LED_COLOR_WHITE, 1 * LED_ONE_SEC},
- {LED_OFF, 1 * LED_ONE_SEC} },
- [STATE_DISCHARGE_S5] = {{LED_OFF, LED_INDEFINITE} },
- [STATE_BATTERY_ERROR] = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC},
- {LED_OFF, 1 * LED_ONE_SEC} },
- [STATE_FACTORY_TEST] = {{EC_LED_COLOR_WHITE, 2 * LED_ONE_SEC},
- {EC_LED_COLOR_AMBER, 2 * LED_ONE_SEC} },
-};
-BUILD_ASSERT(ARRAY_SIZE(led_bat_state_table) == LED_NUM_STATES);
-
-const enum ec_led_id supported_led_ids[] = { EC_LED_ID_BATTERY_LED };
-
-const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
-
-__override void led_set_color_battery(enum ec_led_colors color)
-{
- switch (color) {
- case EC_LED_COLOR_WHITE:
- gpio_set_level(GPIO_LED_1_PWR_WHITE_L, LED_ON_LVL);
- gpio_set_level(GPIO_LED_2_CHG_AMBER_L, LED_OFF_LVL);
- break;
- case EC_LED_COLOR_AMBER:
- gpio_set_level(GPIO_LED_1_PWR_WHITE_L, LED_OFF_LVL);
- gpio_set_level(GPIO_LED_2_CHG_AMBER_L, LED_ON_LVL);
- break;
- default: /* LED_OFF and other unsupported colors */
- gpio_set_level(GPIO_LED_1_PWR_WHITE_L, LED_OFF_LVL);
- gpio_set_level(GPIO_LED_2_CHG_AMBER_L, LED_OFF_LVL);
- break;
- }
-}
-
-void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
-{
- brightness_range[EC_LED_COLOR_WHITE] = 1;
- brightness_range[EC_LED_COLOR_AMBER] = 1;
-}
-
-int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
-{
- if (brightness[EC_LED_COLOR_WHITE] != 0)
- led_set_color_battery(EC_LED_COLOR_WHITE);
- else if (brightness[EC_LED_COLOR_AMBER] != 0)
- led_set_color_battery(EC_LED_COLOR_AMBER);
- else
- led_set_color_battery(LED_OFF);
-
- return EC_SUCCESS;
-}
diff --git a/board/driblee/usb_pd_policy.c b/board/driblee/usb_pd_policy.c
deleted file mode 100644
index 19dd01d37b..0000000000
--- a/board/driblee/usb_pd_policy.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "charge_manager.h"
-#include "chipset.h"
-#include "common.h"
-#include "console.h"
-#include "driver/tcpm/tcpci.h"
-#include "driver/charger/isl923x_public.h"
-#include "usb_pd.h"
-
-#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args)
-#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args)
-
-int pd_check_vconn_swap(int port)
-{
- /* Allow VCONN swaps if the AP is on. */
- return chipset_in_state(CHIPSET_STATE_ANY_SUSPEND | CHIPSET_STATE_ON);
-}
-
-void pd_power_supply_reset(int port)
-{
- /* Disable VBUS */
- tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_LOW);
-
- /* Notify host of power info change. */
- pd_send_host_event(PD_EVENT_POWER_CHANGE);
-}
-
-int pd_set_power_supply_ready(int port)
-{
- int rv;
-
- if (port >= CONFIG_USB_PD_PORT_MAX_COUNT)
- return EC_ERROR_INVAL;
-
- /* Disable charging. */
- rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SNK_CTRL_LOW);
- if (rv)
- return rv;
-
- /* Our policy is not to source VBUS when the AP is off. */
- if (chipset_in_state(CHIPSET_STATE_ANY_OFF))
- return EC_ERROR_NOT_POWERED;
-
- /* Provide Vbus. */
- rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_HIGH);
- if (rv)
- return rv;
-
- rv = raa489000_enable_asgate(port, true);
- if (rv)
- return rv;
-
- /* Notify host of power info change. */
- pd_send_host_event(PD_EVENT_POWER_CHANGE);
-
- return EC_SUCCESS;
-}
diff --git a/board/driblee/vif_override.xml b/board/driblee/vif_override.xml
deleted file mode 100644
index 32736caf64..0000000000
--- a/board/driblee/vif_override.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File
- Definition from the USB-IF.
--->
View Lorry Controller Status