diff options
Diffstat (limited to 'board/elm/board.h')
| -rw-r--r-- | board/elm/board.h | 252 |
1 files changed, 0 insertions, 252 deletions
diff --git a/board/elm/board.h b/board/elm/board.h deleted file mode 100644 index 40eb81eab8..0000000000 --- a/board/elm/board.h +++ /dev/null @@ -1,252 +0,0 @@ -/* Copyright 2016 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* elm board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* - * Allow dangerous commands. - * TODO: Remove this config engineering velidation. - */ -#define CONFIG_SYSTEM_UNLOCKED - -/* Free up flash space */ -#undef CONFIG_USB_PD_TCPMV1_DEBUG - -/* Accelero meter and gyro sensor */ -#define CONFIG_ACCEL_KX022 -#undef CONfFIG_CMD_ACCELSPOOF -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL -#define CONFIG_LID_ANGLE_UPDATE - -#define CONFIG_ADC -#undef CONFIG_ADC_WATCHDOG - -/* AC adaptor, charger, battery */ -#define CONFIG_BATTERY_CUT_OFF -#undef CONFIG_BATTERY_PRECHARGE_TIMEOUT -#define CONFIG_BATTERY_PRECHARGE_TIMEOUT 300 -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_BAT_PRESENT_L -#define CONFIG_BATTERY_SMART -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGER -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGE_RAMP_HW -#define CONFIG_CHARGER_ISL9237 -#define CONFIG_CHARGER_MAX_INPUT_CURRENT 3000 -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHIPSET_MT817X -#define CONFIG_CMD_TYPEC -#define CONFIG_EXTPOWER_GPIO - -/* Increase tx buffer size, as we'd like to stream EC log to AP. */ -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 8192 - -/* Wakeup pin: EC_WAKE(PA0) - WKUP1 */ -#define CONFIG_FORCE_CONSOLE_RESUME -#define CONFIG_HIBERNATE -#define CONFIG_HIBERNATE_WAKEUP_PINS (STM32_PWR_CSR_EWUP1) - -/* Other configs */ -#define CONFIG_HOST_COMMAND_STATUS -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_PROTOCOL_MKBP -#define CONFIG_LED_COMMON -#define CONFIG_LID_SWITCH -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_GPIO -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_COMMON -#define CONFIG_USB_CHARGER -#define CONFIG_SPI -#define CONFIG_SPI_CONTROLLER -#define CONFIG_STM_HWTIMER32 -#define CONFIG_VBOOT_HASH -#undef CONFIG_WATCHDOG_HELP -#define CONFIG_SWITCH -#define CONFIG_BOARD_VERSION_GPIO -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 1 -#define CONFIG_TEMP_SENSOR -#define CONFIG_DPTF - -/* Type-C */ -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV1 -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DUAL_ROLE - -#define CONFIG_USB_PD_LOGGING - -#define CONFIG_USB_PD_PORT_MAX_COUNT 1 -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_ANX7688 -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_TCPC -#undef CONFIG_TCPC_I2C_BASE_ADDR_FLAGS -#define CONFIG_TCPC_I2C_BASE_ADDR_FLAGS 0x2C -#define CONFIG_USB_PD_ANX7688 - -/* UART DMA */ -#undef CONFIG_UART_TX_DMA -#undef CONFIG_UART_RX_DMA - -/* BC 1.2 charger */ -#define CONFIG_BC12_DETECT_PI3USB9281 -#define CONFIG_BC12_DETECT_PI3USB9281_CHIP_COUNT 1 - -/* Optional features */ -#define CONFIG_CMD_CHARGER_ADC_AMON_BMON -/* Mark host command structs as aligned */ -#define CONFIG_HOSTCMD_ALIGNED -/* By default, set hcdebug to off */ -#undef CONFIG_HOSTCMD_DEBUG_MODE -#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF -#define CONFIG_CMD_I2C_PROTECT -#define CONFIG_HOSTCMD_PD_CONTROL - -/* - * Flash layout: - * PSTATE(4KB) - * | - * (124KB) v (132KB) - * |<-----Protected Region------>|<------Unprotected Region----->| - * |<--------RO image--------->| | |<--------RW image----------->| - * 0 (120KB) ^ ^ (128KB) - * | | - * | sector 31(132KB sector) - * | - * sector 30(4KB sector) - */ -#undef CONFIG_RW_MEM_OFF -#undef CONFIG_RW_SIZE -#undef CONFIG_EC_WRITABLE_STORAGE_OFF -#undef CONFIG_EC_WRITABLE_STORAGE_SIZE -#undef CONFIG_WP_STORAGE_SIZE -#define CONFIG_RW_MEM_OFF (128 * 1024) -#define CONFIG_RW_SIZE (128 * 1024) -#define CONFIG_EC_WRITABLE_STORAGE_OFF (128 * 1024) -#define CONFIG_EC_WRITABLE_STORAGE_SIZE (128 * 1024) -#define CONFIG_WP_STORAGE_SIZE (128 * 1024) - -/* Drivers */ -#ifndef __ASSEMBLER__ - -/* 48 MHz SYSCLK clock frequency */ -#define CPU_CLOCK 48000000 - -/* Keyboard output port list */ -#define KB_OUT_PORT_LIST GPIO_A, GPIO_B, GPIO_C, GPIO_D - -/* 2 I2C master ports, connect to battery, charger, pd and USB switches */ -#define I2C_PORT_MASTER 0 -#define I2C_PORT_ACCEL 0 -#define I2C_PORT_BATTERY 0 -#define I2C_PORT_CHARGER 0 -#define I2C_PORT_PERICOM 0 -#define I2C_PORT_THERMAL 0 -#define I2C_PORT_PD_MCU 1 -#define I2C_PORT_USB_MUX 1 -#define I2C_PORT_TCPC 1 - -/* Enable Accel over SPI */ -#define CONFIG_SPI_ACCEL_PORT 0 /* First SPI master port (SPI2) */ - -/* Timer selection */ -#define TIM_CLOCK32 2 -#define TIM_WATCHDOG 4 - -/* Define the host events which are allowed to wakeup AP in S3. */ -#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ - (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEYBOARD_RECOVERY) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEYBOARD_FASTBOOT)) - -#include "gpio_signal.h" - -enum power_signal { - MTK_POWER_GOOD = 0, - MTK_SUSPEND_ASSERTED, - /* Number of power signals */ - POWER_SIGNAL_COUNT -}; - -enum pwm_channel { - PWM_CH_POWER_LED = 0, - /* Number of PWM channels */ - PWM_CH_COUNT -}; - -enum adc_channel { - ADC_PSYS = 0, /* PC1: STM32_AIN(2) */ - ADC_AMON_BMON, /* PC0: STM32_AIN(10) */ - ADC_VBUS, /* PA2: STM32_AIN(11) */ - ADC_CH_COUNT -}; - -enum temp_sensor_id { -#ifdef CONFIG_TEMP_SENSOR_TMP432 - /* TMP432 local and remote sensors */ - TEMP_SENSOR_I2C_TMP432_LOCAL, - TEMP_SENSOR_I2C_TMP432_REMOTE1, - TEMP_SENSOR_I2C_TMP432_REMOTE2, -#endif - /* Battery temperature sensor */ - TEMP_SENSOR_BATTERY, - - TEMP_SENSOR_COUNT -}; - -enum sensor_id { - BASE_ACCEL, - LID_ACCEL, - SENSOR_COUNT, -}; - -/* TODO: determine the following board specific type-C power constants */ -/* - * delay to turn on the power supply max is ~16ms. - * delay to turn off the power supply max is about ~180ms. - */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* delay to turn on/off vconn */ - -/* Define typical operating power and max power */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 45000 -#define PD_MAX_CURRENT_MA CONFIG_CHARGER_MAX_INPUT_CURRENT -#define PD_MAX_VOLTAGE_MV 20000 - -/* The lower the input voltage, the higher the power efficiency. */ -#define PD_PREFER_LOW_VOLTAGE - -/* Reset PD MCU */ -void board_reset_pd_mcu(void); -/* Set AP reset pin according to parameter */ -void board_set_ap_reset(int asserted); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |