diff options
Diffstat (limited to 'board/endeavour/board.h')
| -rw-r--r-- | board/endeavour/board.h | 152 |
1 files changed, 0 insertions, 152 deletions
diff --git a/board/endeavour/board.h b/board/endeavour/board.h deleted file mode 100644 index 36afe69d6c..0000000000 --- a/board/endeavour/board.h +++ /dev/null @@ -1,152 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Endeavour board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* - * Allow dangerous commands. - * TODO: Remove this config before production. - */ -#undef CONFIG_SYSTEM_UNLOCKED -#define CONFIG_USB_PD_COMM_LOCKED - -/* EC */ -#define CONFIG_ADC -#define CONFIG_BOARD_VERSION_CBI -#define CONFIG_BOARD_HAS_RTC_RESET -#define CONFIG_CRC8 -#define CONFIG_CBI_EEPROM -#define CONFIG_DEDICATED_RECOVERY_BUTTON -#define CONFIG_EMULATED_SYSRQ -#define CONFIG_LED_COMMON -#define CONFIG_MKBP_INPUT_DEVICES -#define CONFIG_MKBP_USE_HOST_EVENT -#define CONFIG_DPTF -#define CONFIG_FLASH_SIZE_BYTES 0x80000 -#define CONFIG_FPU -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#undef CONFIG_LID_SWITCH -#define CONFIG_POWER_BUTTON_IGNORE_LID -#define CONFIG_PWM -#define CONFIG_LTO -#define CONFIG_CHIP_PANIC_BACKUP -#define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25X40 -#define CONFIG_WATCHDOG_HELP -#define CONFIG_WIRELESS -#define CONFIG_WIRELESS_SUSPEND \ - (EC_WIRELESS_SWITCH_WLAN | EC_WIRELESS_SWITCH_WLAN_POWER) -#define WIRELESS_GPIO_WLAN GPIO_WLAN_OFF_L -#define WIRELESS_GPIO_WLAN_POWER GPIO_PP3300_DX_WLAN -#define CONFIG_FANS 1 -#define CONFIG_FAN_RPM_CUSTOM -#define CONFIG_THROTTLE_AP -#define CONFIG_CHIPSET_CAN_THROTTLE -#define CONFIG_PWM - -/* EC console commands */ -#define CONFIG_CMD_BUTTON - -/* SOC */ -#define CONFIG_CHIPSET_SKYLAKE -#define CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESET -#define CONFIG_CHIPSET_HAS_PRE_INIT_CALLBACK -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 - -#define CONFIG_EXTPOWER_GPIO -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_BUTTON_INIT_IDLE -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30 -#define CONFIG_DELAY_DSW_PWROK_TO_PWRBTN - -/* Sensor */ -#define CONFIG_TEMP_SENSOR -#define CONFIG_TEMP_SENSOR_TMP432 - -/* USB-A config */ -#define CONFIG_USB_PORT_POWER_DUMB -#define USB_PORT_COUNT 4 - -/* Optional feature to configure npcx chip */ -#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ -#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ -#define NPCX_TACH_SEL2 1 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ - -/* I2C ports */ -#define I2C_PORT_PSE NPCX_I2C_PORT0_0 -#define I2C_PORT_EEPROM NPCX_I2C_PORT0_1 -#define I2C_PORT_PMIC NPCX_I2C_PORT2 -#define I2C_PORT_THERMAL NPCX_I2C_PORT3 - -/* I2C addresses */ -#define I2C_ADDR_EEPROM_FLAGS 0x50 - -#define CONFIG_VBOOT_HASH -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -enum charge_port { - CHARGE_PORT_BARRELJACK, -}; - -enum temp_sensor_id { - TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */ - TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */ - TEMP_SENSOR_COUNT -}; - -enum adc_channel { - ADC_VBUS, - ADC_CH_COUNT -}; - -enum pwm_channel { - PWM_CH_LED_RED, - PWM_CH_LED_WHITE, - PWM_CH_FAN, - /* Number of PWM channels */ - PWM_CH_COUNT -}; - -enum fan_channel { - FAN_CH_0, - /* Number of FAN channels */ - FAN_CH_COUNT -}; - -enum mft_channel { - MFT_CH_0, - /* Number of MFT channels */ - MFT_CH_COUNT -}; - -enum OEM_ID { - OEM_ENDEAVOUR = 9, - /* Number of OEM IDs */ - OEM_COUNT -}; - -/* Board specific handlers */ -void show_critical_error(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |