diff options
Diffstat (limited to 'board/ezkinil/board.h')
| -rw-r--r-- | board/ezkinil/board.h | 107 |
1 files changed, 42 insertions, 65 deletions
diff --git a/board/ezkinil/board.h b/board/ezkinil/board.h index 72ccbc78d2..aa1fe065f4 100644 --- a/board/ezkinil/board.h +++ b/board/ezkinil/board.h @@ -1,4 +1,4 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. +/* Copyright 2020 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -40,38 +40,34 @@ #define TUSB544_I2C_ADDR_FLAGS1 0x0F /* GPIO mapping from board specific name to EC common name. */ -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_ODL -#define CONFIG_SCI_GPIO GPIO_EC_FCH_SCI_ODL -#define GPIO_AC_PRESENT GPIO_ACOK_OD -#define GPIO_CPU_PROCHOT GPIO_PROCHOT_ODL -#define GPIO_EC_INT_L GPIO_EC_AP_INT_ODL -#define GPIO_ENABLE_BACKLIGHT_L GPIO_EC_EDP_BL_DISABLE -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV -#define GPIO_PCH_PWRBTN_L GPIO_EC_FCH_PWR_BTN_L -#define GPIO_PCH_RSMRST_L GPIO_EC_FCH_RSMRST_L -#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L -#define GPIO_PCH_SLP_S5_L GPIO_SLP_S5_L -#define GPIO_PCH_SYS_PWROK GPIO_EC_FCH_PWROK -#define GPIO_PCH_WAKE_L GPIO_EC_FCH_WAKE_L -#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL -#define GPIO_S0_PGOOD GPIO_S0_PWROK_OD -#define GPIO_S5_PGOOD GPIO_EC_PWROK_OD -#define GPIO_SYS_RESET_L GPIO_EC_SYS_RST_L -#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL -#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL -#define GPIO_WP_L GPIO_EC_WP_L -#define GPIO_PACKET_MODE_EN GPIO_EC_H1_PACKET_MODE -#define GPIO_DP1_HPD GPIO_EC_DP1_HPD -#define IOEX_HDMI_CONN_HPD_3V3_DB IOEX_USB_C1_PPC_ILIM_3A_EN +#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_ODL +#define CONFIG_SCI_GPIO GPIO_EC_FCH_SCI_ODL +#define GPIO_AC_PRESENT GPIO_ACOK_OD +#define GPIO_CPU_PROCHOT GPIO_PROCHOT_ODL +#define GPIO_EC_INT_L GPIO_EC_AP_INT_ODL +#define GPIO_ENABLE_BACKLIGHT_L GPIO_EC_EDP_BL_DISABLE +#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW +#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV +#define GPIO_PCH_PWRBTN_L GPIO_EC_FCH_PWR_BTN_L +#define GPIO_PCH_RSMRST_L GPIO_EC_FCH_RSMRST_L +#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L +#define GPIO_PCH_SLP_S5_L GPIO_SLP_S5_L +#define GPIO_PCH_SYS_PWROK GPIO_EC_FCH_PWROK +#define GPIO_PCH_WAKE_L GPIO_EC_FCH_WAKE_L +#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL +#define GPIO_S0_PGOOD GPIO_S0_PWROK_OD +#define GPIO_S5_PGOOD GPIO_EC_PWROK_OD +#define GPIO_SYS_RESET_L GPIO_EC_SYS_RST_L +#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL +#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL +#define GPIO_WP_L GPIO_EC_WP_L +#define GPIO_PACKET_MODE_EN GPIO_EC_H1_PACKET_MODE +#define GPIO_DP1_HPD GPIO_EC_DP1_HPD +#define IOEX_HDMI_CONN_HPD_3V3_DB IOEX_USB_C1_PPC_ILIM_3A_EN #ifndef __ASSEMBLER__ -enum adc_channel { - ADC_TEMP_SENSOR_CHARGER, - ADC_TEMP_SENSOR_SOC, - ADC_CH_COUNT -}; +enum adc_channel { ADC_TEMP_SENSOR_CHARGER, ADC_TEMP_SENSOR_SOC, ADC_CH_COUNT }; enum battery_type { BATTERY_AP19B8M, @@ -85,11 +81,7 @@ enum mft_channel { MFT_CH_COUNT, }; -enum pwm_channel { - PWM_CH_KBLIGHT = 0, - PWM_CH_FAN, - PWM_CH_COUNT -}; +enum pwm_channel { PWM_CH_KBLIGHT = 0, PWM_CH_FAN, PWM_CH_COUNT }; enum temp_sensor_id { TEMP_SENSOR_CHARGER = 0, @@ -98,11 +90,7 @@ enum temp_sensor_id { TEMP_SENSOR_COUNT }; -enum usba_port { - USBA_PORT_A0 = 0, - USBA_PORT_A1, - USBA_PORT_COUNT -}; +enum usba_port { USBA_PORT_A0 = 0, USBA_PORT_A1, USBA_PORT_COUNT }; /***************************************************************************** * CBI EC FW Configuration @@ -153,57 +141,46 @@ enum ec_cfg_usb_db_type { #include "cbi_ec_fw_config.h" -#define HAS_USBA1_RETIMER_TUSB522 \ - (BIT(EZKINIL_DB_T_OPT2_USBAC)) +#define HAS_USBA1_RETIMER_TUSB522 (BIT(EZKINIL_DB_T_OPT2_USBAC)) static inline bool ec_config_has_usba1_retimer_tusb522(void) { - return !!(BIT(ec_config_get_usb_db()) & - HAS_USBA1_RETIMER_TUSB522); + return !!(BIT(ec_config_get_usb_db()) & HAS_USBA1_RETIMER_TUSB522); } -#define HAS_USBC1_RETIMER_PS8743 \ - (BIT(EZKINIL_DB_T_OPT2_USBAC)) +#define HAS_USBC1_RETIMER_PS8743 (BIT(EZKINIL_DB_T_OPT2_USBAC)) static inline bool ec_config_has_usbc1_retimer_ps8743(void) { - return !!(BIT(ec_config_get_usb_db()) & - HAS_USBC1_RETIMER_PS8743); + return !!(BIT(ec_config_get_usb_db()) & HAS_USBC1_RETIMER_PS8743); } -#define HAS_USBC1_RETIMER_TUSB544 \ - (BIT(EZKINIL_DB_T_OPT1_USBC_HDMI)) +#define HAS_USBC1_RETIMER_TUSB544 (BIT(EZKINIL_DB_T_OPT1_USBC_HDMI)) static inline bool ec_config_has_usbc1_retimer_tusb544(void) { - return !!(BIT(ec_config_get_usb_db()) & - HAS_USBC1_RETIMER_TUSB544); + return !!(BIT(ec_config_get_usb_db()) & HAS_USBC1_RETIMER_TUSB544); } -#define HAS_HDMI_RETIMER_PI3HDX1204 \ - (BIT(EZKINIL_DB_T_OPT1_USBC_HDMI)) +#define HAS_HDMI_RETIMER_PI3HDX1204 (BIT(EZKINIL_DB_T_OPT1_USBC_HDMI)) static inline bool ec_config_has_hdmi_retimer_pi3hdx1204(void) { - return !!(BIT(ec_config_get_usb_db()) & - HAS_HDMI_RETIMER_PI3HDX1204); + return !!(BIT(ec_config_get_usb_db()) & HAS_HDMI_RETIMER_PI3HDX1204); } -#define HAS_HDMI_CONN_HPD \ - (BIT(EZKINIL_DB_T_OPT1_USBC_HDMI)) +#define HAS_HDMI_CONN_HPD (BIT(EZKINIL_DB_T_OPT1_USBC_HDMI)) static inline bool ec_config_has_hdmi_conn_hpd(void) { - return !!(BIT(ec_config_get_usb_db()) & - HAS_HDMI_CONN_HPD); + return !!(BIT(ec_config_get_usb_db()) & HAS_HDMI_CONN_HPD); } /* TODO: Fill in with GPIO values */ -#define PORT_TO_HPD(port) ((port == 0) \ - ? GPIO_USB_C0_HPD \ - : (ec_config_has_usbc1_retimer_ps8743()) \ - ? GPIO_DP1_HPD \ - : GPIO_DP2_HPD) +#define PORT_TO_HPD(port) \ + ((port == 0) ? GPIO_USB_C0_HPD : \ + (ec_config_has_usbc1_retimer_ps8743()) ? GPIO_DP1_HPD : \ + GPIO_DP2_HPD) extern const struct usb_mux usbc1_tusb544; extern const struct usb_mux usbc1_ps8818; |