diff options
Diffstat (limited to 'board/fennel')
-rw-r--r-- | board/fennel/battery.c | 104 | ||||
-rw-r--r-- | board/fennel/board.c | 683 | ||||
-rw-r--r-- | board/fennel/board.h | 160 | ||||
-rw-r--r-- | board/fennel/build.mk | 15 | ||||
-rw-r--r-- | board/fennel/ec.tasklist | 20 | ||||
-rw-r--r-- | board/fennel/gpio.inc | 121 | ||||
-rw-r--r-- | board/fennel/led.c | 115 | ||||
-rw-r--r-- | board/fennel/vif_override.xml | 3 |
8 files changed, 0 insertions, 1221 deletions
diff --git a/board/fennel/battery.c b/board/fennel/battery.c deleted file mode 100644 index cfd17a136f..0000000000 --- a/board/fennel/battery.c +++ /dev/null @@ -1,104 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "battery.h" -#include "battery_fuel_gauge.h" -#include "gpio.h" - -const struct board_batt_params board_battery_info[] = { - /* LGC L20L3PG2, Gauge IC: RAJ240047A20DNP. */ - [BATTERY_LGC] = { - .fuel_gauge = { - .manuf_name = "LGC", - .device_name = "L20L3PG2", - .ship_mode = { - .reg_addr = 0x34, - .reg_data = { 0x0000, 0x1000 }, - }, - .fet = { - .reg_addr = 0x34, - .reg_mask = 0x0100, - .disconnect_val = 0x0100, - } - }, - .batt_info = { - .voltage_max = 13050, /* mV */ - .voltage_normal = 11400, /* mV */ - .voltage_min = 9000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 50, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = -20, - .discharging_max_c = 73, - }, - }, - /* Sunwoda L20D3PG2, Gauge IC: BQ40Z697A. */ - [BATTERY_SUNWODA] = { - .fuel_gauge = { - .manuf_name = "Sunwoda", - .device_name = "L20D3PG2", - .ship_mode = { - .reg_addr = 0x34, - .reg_data = { 0x0000, 0x1000 }, - }, - .fet = { - .reg_addr = 0x34, - .reg_mask = 0x0100, - .disconnect_val = 0x0100, - } - }, - .batt_info = { - .voltage_max = 13050, /* mV */ - .voltage_normal = 11250, /* mV */ - .voltage_min = 9000, /* mV */ - .precharge_current = 200, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 50, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = -20, - .discharging_max_c = 60, - }, - }, - - /* SIMPLO L20M3PG2, Gauge IC: BQ40Z697A. */ - [BATTERY_SMP] = { - .fuel_gauge = { - .manuf_name = "SMP", - .device_name = "L20M3PG2", - .ship_mode = { - .reg_addr = 0x34, - .reg_data = { 0x0000, 0x1000 }, - }, - .fet = { - .reg_addr = 0x34, - .reg_mask = 0x0100, - .disconnect_val = 0x0100, - }, - }, - .batt_info = { - .voltage_max = 13050, /* mV */ - .voltage_normal = 11250, /* mV */ - .voltage_min = 9000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 45, - .charging_min_c = 0, - .charging_max_c = 45, - .discharging_min_c = -40, - .discharging_max_c = 73, - }, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT); - -const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_LGC; - -enum battery_present battery_hw_present(void) -{ - return gpio_get_level(GPIO_EC_BATT_PRES_ODL) ? BP_NO : BP_YES; -} diff --git a/board/fennel/board.c b/board/fennel/board.c deleted file mode 100644 index 0706813592..0000000000 --- a/board/fennel/board.c +++ /dev/null @@ -1,683 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "adc.h" -#include "backlight.h" -#include "button.h" -#include "charge_manager.h" -#include "charge_ramp.h" -#include "charge_state.h" -#include "charger.h" -#include "chipset.h" -#include "common.h" -#include "console.h" -#include "driver/accel_lis2dw12.h" -#include "driver/accelgyro_bmi_common.h" -#include "driver/accelgyro_icm_common.h" -#include "driver/accelgyro_icm42607.h" -#include "driver/battery/max17055.h" -#include "driver/bc12/pi3usb9201.h" -#include "driver/charger/isl923x.h" -#include "driver/tcpm/fusb302.h" -#include "driver/usb_mux/it5205.h" -#include "ec_commands.h" -#include "extpower.h" -#include "gpio.h" -#include "hooks.h" -#include "host_command.h" -#include "i2c.h" -#include "i2c_bitbang.h" -#include "it8801.h" -#include "keyboard_scan.h" -#include "keyboard_backlight.h" -#include "lid_switch.h" -#include "power.h" -#include "power_button.h" -#include "registers.h" -#include "spi.h" -#include "system.h" -#include "tablet_mode.h" -#include "task.h" -#include "tcpm/tcpm.h" -#include "timer.h" -#include "usb_charge.h" -#include "usb_mux.h" -#include "usb_pd_tcpm.h" -#include "util.h" - -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -static void tcpc_alert_event(enum gpio_signal signal) -{ - schedule_deferred_pd_interrupt(0 /* port */); -} - -#include "gpio_list.h" - -/******************************************************************************/ -/* ADC channels. Must be in the exactly same order as in enum adc_channel. */ -const struct adc_t adc_channels[] = { - [ADC_BOARD_ID] = {"BOARD_ID", 3300, 4096, 0, STM32_AIN(10)}, - [ADC_EC_SKU_ID] = {"EC_SKU_ID", 3300, 4096, 0, STM32_AIN(8)}, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -/******************************************************************************/ -/* I2C ports */ -const struct i2c_port_t i2c_ports[] = { - {"typec", 0, 400, GPIO_I2C1_SCL, GPIO_I2C1_SDA}, - {"other", 1, 400, GPIO_I2C2_SCL, GPIO_I2C2_SDA}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -const struct i2c_port_t i2c_bitbang_ports[] = { - {"battery", 2, 100, GPIO_I2C3_SCL, GPIO_I2C3_SDA, .drv = &bitbang_drv}, -}; -const unsigned int i2c_bitbang_ports_used = ARRAY_SIZE(i2c_bitbang_ports); - -#define BC12_I2C_ADDR PI3USB9201_I2C_ADDR_3 - -/* power signal list. Must match order of enum power_signal. */ -const struct power_signal_info power_signal_list[] = { - {GPIO_AP_IN_SLEEP_L, POWER_SIGNAL_ACTIVE_LOW, "AP_IN_S3_L"}, - {GPIO_PMIC_EC_RESETB, POWER_SIGNAL_ACTIVE_HIGH, "PMIC_PWR_GOOD"}, -}; -BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT); - -/* Keyboard scan setting */ -__override struct keyboard_scan_config keyscan_config = { - /* - * TODO(b/133200075): Tune this once we have the final performance - * out of the driver and the i2c bus. - */ - .output_settle_us = 35, - .debounce_down_us = 5 * MSEC, - .debounce_up_us = 40 * MSEC, - .scan_period_us = 10 * MSEC, - .min_post_scan_delay_us = 10 * MSEC, - .poll_timeout_us = 100 * MSEC, - .actual_key_mask = { - 0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff, - 0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca /* full set */ - }, -}; - -struct ioexpander_config_t ioex_config[CONFIG_IO_EXPANDER_PORT_COUNT] = { - [0] = { - .i2c_host_port = IT8801_KEYBOARD_PWM_I2C_PORT, - .i2c_addr_flags = IT8801_I2C_ADDR1, - .drv = &it8801_ioexpander_drv, - }, -}; - -/******************************************************************************/ -/* SPI devices */ -const struct spi_device_t spi_devices[] = { - { CONFIG_SPI_ACCEL_PORT, 2, GPIO_EC_SENSOR_SPI_NSS }, -}; -const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices); - -const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = { - { - .i2c_port = I2C_PORT_BC12, - .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS, - }, -}; - -/******************************************************************************/ -const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_TCPC0, - .addr_flags = FUSB302_I2C_ADDR_FLAGS, - }, - .drv = &fusb302_tcpm_drv, - }, -}; - -static void board_hpd_status(const struct usb_mux *me, - mux_state_t mux_state) -{ - /* - * svdm_dp_attention() did most of the work, we only need to notify - * host here. - */ - host_set_single_event(EC_HOST_EVENT_USB_MUX); -} - -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .usb_port = 0, - .i2c_port = I2C_PORT_USB_MUX, - .i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS, - .driver = &it5205_usb_mux_driver, - .hpd_update = &board_hpd_status, - }, -}; - -/* Charger config. Start i2c address at 1, update during runtime */ -struct charger_config_t chg_chips[] = { - { - .i2c_port = 1, - .i2c_addr_flags = ISL923X_ADDR_FLAGS, - .drv = &isl923x_drv, - }, -}; - -/* Board version depends on ADCs, so init i2c port after ADC */ -static void charger_config_complete(void) -{ - chg_chips[0].i2c_port = board_get_charger_i2c(); -} -DECLARE_HOOK(HOOK_INIT, charger_config_complete, HOOK_PRIO_INIT_ADC + 1); - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - - if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL)) - status |= PD_STATUS_TCPC_ALERT_0; - - return status; -} - -static int force_discharge; - -int board_set_active_charge_port(int charge_port) -{ - CPRINTS("New chg p%d", charge_port); - - /* ignore all request when discharge mode is on */ - if (force_discharge && charge_port != CHARGE_PORT_NONE) - return EC_SUCCESS; - - switch (charge_port) { - case CHARGE_PORT_USB_C: - /* Don't charge from a source port */ - if (board_vbus_source_enabled(charge_port)) - return -1; - break; - case CHARGE_PORT_NONE: - /* - * To ensure the fuel gauge (max17055) is always powered - * even when battery is disconnected, keep VBAT rail on but - * set the charging current to minimum. - */ - charger_set_current(CHARGER_SOLO, 0); - break; - default: - panic("Invalid charge port\n"); - break; - } - - return EC_SUCCESS; -} - -void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - charge_ma = (charge_ma * 95) / 100; - charge_set_input_current_limit(MAX(charge_ma, - CONFIG_CHARGER_INPUT_CURRENT), charge_mv); -} - -int board_discharge_on_ac(int enable) -{ - int ret, port; - - if (enable) { - port = CHARGE_PORT_NONE; - } else { - /* restore the charge port state */ - port = charge_manager_get_override(); - if (port == OVERRIDE_OFF) - port = charge_manager_get_active_charge_port(); - } - - ret = charger_discharge_on_ac(enable); - if (ret) - return ret; - - force_discharge = enable; - return board_set_active_charge_port(port); -} - -int pd_snk_is_vbus_provided(int port) -{ - /* TODO(b:138352732): read IT8801 GPIO EN_USBC_CHARGE_L */ - return EC_ERROR_UNIMPLEMENTED; -} - -void bc12_interrupt(enum gpio_signal signal) -{ - task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12); -} - -#ifndef VARIANT_KUKUI_NO_SENSORS -static void board_spi_enable(void) -{ - /* - * Pin mux spi peripheral away from emmc, since RO might have - * left them there. - */ - gpio_config_module(MODULE_SPI_FLASH, 0); - - /* Enable clocks to SPI2 module. */ - STM32_RCC_APB1ENR |= STM32_RCC_PB1_SPI2; - - /* Reset SPI2 to clear state left over from the emmc slave. */ - STM32_RCC_APB1RSTR |= STM32_RCC_PB1_SPI2; - STM32_RCC_APB1RSTR &= ~STM32_RCC_PB1_SPI2; - - /* Reinitialize spi peripheral. */ - spi_enable(&spi_devices[0], 1); - - /* Pin mux spi peripheral toward the sensor. */ - gpio_config_module(MODULE_SPI_CONTROLLER, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_STARTUP, - board_spi_enable, - MOTION_SENSE_HOOK_PRIO - 1); - -static void board_spi_disable(void) -{ - /* Set pins to a state calming the sensor down. */ - gpio_set_flags(GPIO_EC_SENSOR_SPI_CK, GPIO_OUT_LOW); - gpio_set_level(GPIO_EC_SENSOR_SPI_CK, 0); - /* Pull SPI_NSS pin to low to prevent a leakage. */ - gpio_set_flags(GPIO_EC_SENSOR_SPI_NSS, GPIO_OUT_LOW); - gpio_set_level(GPIO_EC_SENSOR_SPI_NSS, 0); - gpio_config_module(MODULE_SPI_CONTROLLER, 0); - - /* Disable spi peripheral and clocks. */ - spi_enable(&spi_devices[0], 0); - STM32_RCC_APB1ENR &= ~STM32_RCC_PB1_SPI2; -} -DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, - board_spi_disable, - MOTION_SENSE_HOOK_PRIO + 1); -#endif /* !VARIANT_KUKUI_NO_SENSORS */ - -static void board_init(void) -{ - /* If the reset cause is external, pulse PMIC force reset. */ - if (system_get_reset_flags() == EC_RESET_FLAG_RESET_PIN) { - gpio_set_level(GPIO_PMIC_FORCE_RESET_ODL, 0); - msleep(100); - gpio_set_level(GPIO_PMIC_FORCE_RESET_ODL, 1); - } - - /* Enable TCPC alert interrupts */ - gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL); - -#ifndef VARIANT_KUKUI_NO_SENSORS - /* Enable interrupts from BMI160 sensor. */ - gpio_enable_interrupt(GPIO_ACCEL_INT_ODL); - - /* For some reason we have to do this again in case of sysjump */ - board_spi_enable(); -#endif /* !VARIANT_KUKUI_NO_SENSORS */ - - /* Enable interrupt from PMIC. */ - gpio_enable_interrupt(GPIO_PMIC_EC_RESETB); - - /* Enable BC12 interrupt */ - gpio_enable_interrupt(GPIO_BC12_EC_INT_ODL); -} -DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); - -#ifndef VARIANT_KUKUI_NO_SENSORS -/* Motion sensors */ -/* Mutexes */ -static struct mutex g_lid_mutex; -static struct mutex g_base_mutex; - -/* Rotation matrixes */ -static const mat33_fp_t base_standard_ref = { - {0, FLOAT_TO_FP(1), 0}, - {FLOAT_TO_FP(-1), 0, 0}, - {0, 0, FLOAT_TO_FP(1)} -}; - -static const mat33_fp_t lid_standard_ref = { - {FLOAT_TO_FP(-1), 0, 0}, - {0, FLOAT_TO_FP(1), 0}, - {0, 0, FLOAT_TO_FP(-1) } -}; - -/* sensor private data */ -/* Lid accel private data */ -static struct stprivate_data g_lis2dwl_data; -/* Base accel private data */ -static struct bmi_drv_data_t g_bmi160_data; -static struct icm_drv_data_t g_icm42607_data; - -enum base_accelgyro_type { - BASE_GYRO_NONE = 0, - BASE_GYRO_BMI160 = 1, - BASE_GYRO_ICM426XX = 2, -}; - -static enum base_accelgyro_type base_accelgyro_config; - -struct motion_sensor_t icm42607_base_accel = { - .name = "Accel", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_ICM42607, - .type = MOTIONSENSE_TYPE_ACCEL, - .location = MOTIONSENSE_LOC_BASE, - .drv = &icm42607_drv, - .mutex = &g_base_mutex, - .drv_data = &g_icm42607_data, - .port = CONFIG_SPI_ACCEL_PORT, - .i2c_spi_addr_flags = ACCEL_MK_SPI_ADDR_FLAGS(CONFIG_SPI_ACCEL_PORT), - .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs.*/ - .rot_standard_ref = NULL, - .min_frequency = ICM42607_ACCEL_MIN_FREQ, - .max_frequency = ICM42607_ACCEL_MAX_FREQ, - .config = { - /* EC use accel for angle detection */ - [SENSOR_CONFIG_EC_S0] = { - .odr = 10000 | ROUND_UP_FLAG, - .ec_rate = 100 * MSEC, - }, - /* Sensor on for angle detection */ - [SENSOR_CONFIG_EC_S3] = { - .odr = 10000 | ROUND_UP_FLAG, - .ec_rate = 100 * MSEC, - }, - }, -}; - -struct motion_sensor_t icm42607_base_gyro = { - .name = "Gyro", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_ICM42607, - .type = MOTIONSENSE_TYPE_GYRO, - .location = MOTIONSENSE_LOC_BASE, - .drv = &icm42607_drv, - .mutex = &g_base_mutex, - .drv_data = &g_icm42607_data, - .port = CONFIG_SPI_ACCEL_PORT, - .i2c_spi_addr_flags = ACCEL_MK_SPI_ADDR_FLAGS(CONFIG_SPI_ACCEL_PORT), - .default_range = 1000, /* dps */ - .rot_standard_ref = NULL, - .min_frequency = ICM42607_GYRO_MIN_FREQ, - .max_frequency = ICM42607_GYRO_MAX_FREQ, -}; - -struct motion_sensor_t motion_sensors[] = { - [LID_ACCEL] = { - .name = "Lid Accel", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_LIS2DWL, - .type = MOTIONSENSE_TYPE_ACCEL, - .location = MOTIONSENSE_LOC_LID, - .drv = &lis2dw12_drv, - .mutex = &g_lid_mutex, - .drv_data = &g_lis2dwl_data, - .port = I2C_PORT_SENSORS, - .i2c_spi_addr_flags = LIS2DWL_ADDR1_FLAGS, - .rot_standard_ref = &lid_standard_ref, - .default_range = 2, /* g */ - .min_frequency = LIS2DW12_ODR_MIN_VAL, - .max_frequency = LIS2DW12_ODR_MAX_VAL, - .config = { - /* EC use accel for angle detection */ - [SENSOR_CONFIG_EC_S0] = { - .odr = 12500 | ROUND_UP_FLAG, - }, - /* Sensor on for lid angle detection */ - [SENSOR_CONFIG_EC_S3] = { - .odr = 10000 | ROUND_UP_FLAG, - }, - }, - }, - /* - * Note: bmi160: supports accelerometer and gyro sensor - * Requirement: accelerometer sensor must init before gyro sensor - * DO NOT change the order of the following table. - */ - [BASE_ACCEL] = { - .name = "Accel", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_BMI160, - .type = MOTIONSENSE_TYPE_ACCEL, - .location = MOTIONSENSE_LOC_BASE, - .drv = &bmi160_drv, - .mutex = &g_base_mutex, - .drv_data = &g_bmi160_data, - .port = CONFIG_SPI_ACCEL_PORT, - .i2c_spi_addr_flags = ACCEL_MK_SPI_ADDR_FLAGS(CONFIG_SPI_ACCEL_PORT), - .rot_standard_ref = &base_standard_ref, - .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs */ - .min_frequency = BMI_ACCEL_MIN_FREQ, - .max_frequency = BMI_ACCEL_MAX_FREQ, - .config = { - /* EC use accel for angle detection */ - [SENSOR_CONFIG_EC_S0] = { - .odr = 10000 | ROUND_UP_FLAG, - .ec_rate = 100 * MSEC, - }, - /* Sensor on for angle detection */ - [SENSOR_CONFIG_EC_S3] = { - .odr = 10000 | ROUND_UP_FLAG, - .ec_rate = 100 * MSEC, - }, - }, - }, - [BASE_GYRO] = { - .name = "Gyro", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_BMI160, - .type = MOTIONSENSE_TYPE_GYRO, - .location = MOTIONSENSE_LOC_BASE, - .drv = &bmi160_drv, - .mutex = &g_base_mutex, - .drv_data = &g_bmi160_data, - .port = CONFIG_SPI_ACCEL_PORT, - .i2c_spi_addr_flags = ACCEL_MK_SPI_ADDR_FLAGS(CONFIG_SPI_ACCEL_PORT), - .default_range = 1000, /* dps */ - .rot_standard_ref = &base_standard_ref, - .min_frequency = BMI_GYRO_MIN_FREQ, - .max_frequency = BMI_GYRO_MAX_FREQ, - }, -}; -const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors); - -static void board_detect_motionsensor(void) -{ - int ret; - int val; - - if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) - return; - if (base_accelgyro_config != BASE_GYRO_NONE) - return; - /* Check base accelgyro chip */ - ret = icm_read8(&icm42607_base_accel, - ICM42607_REG_WHO_AM_I, &val); - if (ret) - ccprints("Get ICM fail."); - if (val == ICM42607_CHIP_ICM42607P) { - motion_sensors[BASE_ACCEL] = icm42607_base_accel; - motion_sensors[BASE_GYRO] = icm42607_base_gyro; - } - base_accelgyro_config = (val == ICM42607_CHIP_ICM42607P) - ? BASE_GYRO_ICM426XX : BASE_GYRO_BMI160; - ccprints("BASE Accelgyro: %s", (val == ICM42607_CHIP_ICM42607P) - ? "ICM42607" : "BMI160"); -} -DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_detect_motionsensor, - HOOK_PRIO_DEFAULT); -/* - * board_spi_enable() will be called in the board_init() when sysjump to rw - * the board_init() is DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT) - * the board_detect_motionsensor() reads data via sensor SPI - * so the priority of board_detect_motionsensor should be HOOK_PRIO_DEFAULT+1 - */ -DECLARE_HOOK(HOOK_INIT, board_detect_motionsensor, HOOK_PRIO_DEFAULT + 1); - -void motion_interrupt(enum gpio_signal signal) -{ - switch (base_accelgyro_config) { - case BASE_GYRO_ICM426XX: - icm42607_interrupt(signal); - break; - case BASE_GYRO_BMI160: - default: - bmi160_interrupt(signal); - break; - } -} - -const struct it8801_pwm_t it8801_pwm_channels[] = { - [IT8801_PWM_CH_KBLIGHT] = {.index = 4}, -}; - -void board_kblight_init(void) -{ - kblight_register(&kblight_it8801); -} - -bool board_has_kb_backlight(void) -{ - /* Default enable keyboard backlight */ - return true; -} -#endif /* !VARIANT_KUKUI_NO_SENSORS */ - -/* Battery functions */ -#define SB_SMARTCHARGE 0x26 -/* Quick charge enable bit */ -#define SMART_QUICK_CHARGE 0x02 -/* Quick charge support bit */ -#define MODE_QUICK_CHARGE_SUPPORT 0x01 - -static void sb_quick_charge_mode(int enable) -{ - int val, rv; - - rv = sb_read(SB_SMARTCHARGE, &val); - if (rv || !(val & MODE_QUICK_CHARGE_SUPPORT)) - return; - - if (enable) - val |= SMART_QUICK_CHARGE; - else - val &= ~SMART_QUICK_CHARGE; - - sb_write(SB_SMARTCHARGE, val); -} - -/* Called on AP S0iX -> S0 transition */ -static void board_chipset_resume(void) -{ -#ifndef VARIANT_KUKUI_NO_SENSORS - if (board_has_kb_backlight()) - ioex_set_level(IOEX_KB_BL_EN, 1); -#endif - - /* Normal charge mode */ - sb_quick_charge_mode(0); -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT); -DECLARE_HOOK(HOOK_INIT, board_chipset_resume, HOOK_PRIO_DEFAULT); - -/* Called on AP S0 -> S0iX transition */ -static void board_chipset_suspend(void) -{ -#ifndef VARIANT_KUKUI_NO_SENSORS - if (board_has_kb_backlight()) - ioex_set_level(IOEX_KB_BL_EN, 0); -#endif - - /* Quick charge mode */ - sb_quick_charge_mode(1); -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT); - -/* Called on AP S5 -> S3 transition */ -static void board_chipset_startup(void) -{ - gpio_set_level(GPIO_EN_USBA_5V, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_chipset_startup, HOOK_PRIO_DEFAULT); - -/* Called on AP S3 -> S5 transition */ -static void board_chipset_shutdown(void) -{ - gpio_set_level(GPIO_EN_USBA_5V, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_chipset_shutdown, HOOK_PRIO_DEFAULT); - -int board_get_charger_i2c(void) -{ - /* TODO(b:138415463): confirm the bus allocation for future builds */ - return board_get_version() == 1 ? 2 : 1; -} - -int board_get_battery_i2c(void) -{ - return board_get_version() >= 1 ? 2 : 1; -} - -#ifdef SECTION_IS_RW -static int it8801_get_target_channel(enum pwm_channel *channel, - int type, int index) -{ - switch (type) { - case EC_PWM_TYPE_GENERIC: - *channel = index; - break; - default: - return -1; - } - - return *channel >= 1; -} - -static enum ec_status -host_command_pwm_set_duty(struct host_cmd_handler_args *args) -{ - const struct ec_params_pwm_set_duty *p = args->params; - enum pwm_channel channel; - uint16_t duty; - - if (it8801_get_target_channel(&channel, p->pwm_type, p->index)) - return EC_RES_INVALID_PARAM; - - duty = (uint32_t) p->duty * 255 / 65535; - it8801_pwm_set_raw_duty(channel, duty); - it8801_pwm_enable(channel, p->duty > 0); - - return EC_RES_SUCCESS; -} -DECLARE_HOST_COMMAND(EC_CMD_PWM_SET_DUTY, - host_command_pwm_set_duty, - EC_VER_MASK(0)); - -static enum ec_status -host_command_pwm_get_duty(struct host_cmd_handler_args *args) -{ - const struct ec_params_pwm_get_duty *p = args->params; - struct ec_response_pwm_get_duty *r = args->response; - - enum pwm_channel channel; - - if (it8801_get_target_channel(&channel, p->pwm_type, p->index)) - return EC_RES_INVALID_PARAM; - - r->duty = (uint32_t) it8801_pwm_get_raw_duty(channel) * 65535 / 255; - args->response_size = sizeof(*r); - - return EC_RES_SUCCESS; -} -DECLARE_HOST_COMMAND(EC_CMD_PWM_GET_DUTY, - host_command_pwm_get_duty, - EC_VER_MASK(0)); -#endif diff --git a/board/fennel/board.h b/board/fennel/board.h deleted file mode 100644 index 697480770c..0000000000 --- a/board/fennel/board.h +++ /dev/null @@ -1,160 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Configuration for Fennel */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -#define VARIANT_KUKUI_JACUZZI -#define VARIANT_KUKUI_BATTERY_SMART -#define VARIANT_KUKUI_CHARGER_ISL9238 -#define VARIANT_KUKUI_EC_STM32F098 -#undef CONFIG_CMD_MFALLOW -#ifndef SECTION_IS_RW -#define VARIANT_KUKUI_NO_SENSORS -#endif /* SECTION_IS_RW */ - -#include "baseboard.h" - -#undef CONFIG_CHIPSET_POWER_SEQ_VERSION -#define CONFIG_CHIPSET_POWER_SEQ_VERSION 1 -#undef CONFIG_SYSTEM_UNLOCKED - -#define CONFIG_BATTERY_HW_PRESENT_CUSTOM - -#define CONFIG_CHARGER_PSYS - -#define CONFIG_CHARGER_RUNTIME_CONFIG - -#define CONFIG_BC12_DETECT_PI3USB9201 - -#define CONFIG_EXTPOWER_GPIO -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 200 - -#define CONFIG_I2C_BITBANG -#undef I2C_BITBANG_PORT_COUNT -#define I2C_BITBANG_PORT_COUNT 1 -#undef CONFIG_I2C_NACK_RETRY_COUNT -#define CONFIG_I2C_NACK_RETRY_COUNT 10 -#define CONFIG_SMBUS_PEC - -#define CONFIG_USB_PD_TCPM_FUSB302 -#define CONFIG_USB_PD_DISCHARGE_GPIO -#define CONFIG_USB_PD_TCPC_LOW_POWER - -#define CONFIG_USB_MUX_IT5205 - -#define CONFIG_LED_ONOFF_STATES - -/* Motion Sensors */ -#ifndef VARIANT_KUKUI_NO_SENSORS -#define CONFIG_ACCEL_LIS2DWL /* Lid accel */ -#define CONFIG_ACCELGYRO_BMI160 /* Base accel */ -#define CONFIG_ACCEL_INTERRUPTS -#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) -#define CONFIG_ACCELGYRO_ICM42607 /* Base accel second source*/ -#define CONFIG_ACCELGYRO_ICM42607_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(LID_ACCEL) -#define CONFIG_ALS -#define CONFIG_CMD_ACCEL_INFO - -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_UPDATE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL - -#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) - -#ifdef SECTION_IS_RW -#define CONFIG_IO_EXPANDER_IT8801_PWM -#define CONFIG_KEYBOARD_BACKLIGHT -#endif - -#endif /* VARIANT_KUKUI_NO_SENSORS */ - -/* I2C ports */ -#define I2C_PORT_BC12 0 -#define I2C_PORT_TCPC0 0 -#define I2C_PORT_USB_MUX 0 -#define I2C_PORT_CHARGER board_get_charger_i2c() -#define I2C_PORT_SENSORS 1 -#define IT8801_KEYBOARD_PWM_I2C_PORT 1 -#define I2C_PORT_VIRTUAL_BATTERY I2C_PORT_BATTERY -#define I2C_PORT_BATTERY 2 - -/* IT8801 I2C address */ -#define IT8801_KEYBOARD_PWM_I2C_ADDR_FLAGS IT8801_I2C_ADDR1 - -/* Enable Accel over SPI */ -#define CONFIG_SPI_ACCEL_PORT 0 /* The first SPI master port (SPI2) */ - -#define CONFIG_KEYBOARD_PROTOCOL_MKBP -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_GPIO - -#ifndef __ASSEMBLER__ - -enum adc_channel { - /* Real ADC channels begin here */ - ADC_BOARD_ID = 0, - ADC_EC_SKU_ID, - ADC_CH_COUNT -}; - -/* power signal definitions */ -enum power_signal { - AP_IN_S3_L, - PMIC_PWR_GOOD, - - /* Number of signals */ - POWER_SIGNAL_COUNT, -}; - -/* Motion sensors */ -enum sensor_id { - LID_ACCEL = 0, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT, -}; - -enum charge_port { - CHARGE_PORT_USB_C, -}; - -enum battery_type { - BATTERY_LGC, - BATTERY_SUNWODA, - BATTERY_SMP, - BATTERY_TYPE_COUNT, -}; - -enum pwm_channel { - IT8801_PWM_CH_KBLIGHT = 0, -}; - -#include "gpio_signal.h" -#include "registers.h" - -#ifdef SECTION_IS_RO -/* Interrupt handler for emmc task */ -void emmc_cmd_interrupt(enum gpio_signal signal); -#endif - -void bc12_interrupt(enum gpio_signal signal); -void board_reset_pd_mcu(void); -int board_get_version(void); -void motion_interrupt(enum gpio_signal signal); - -/* returns the i2c port number of charger/battery */ -int board_get_charger_i2c(void); -int board_get_battery_i2c(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ diff --git a/board/fennel/build.mk b/board/fennel/build.mk deleted file mode 100644 index a6e1c010d7..0000000000 --- a/board/fennel/build.mk +++ /dev/null @@ -1,15 +0,0 @@ -# -*- makefile -*- -# Copyright 2020 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Board specific files build -# -# -# STmicro STM32F098VC -CHIP:=stm32 -CHIP_FAMILY:=stm32f0 -CHIP_VARIANT:=stm32f09x -BASEBOARD:=kukui - -board-y=battery.o board.o led.o diff --git a/board/fennel/ec.tasklist b/board/fennel/ec.tasklist deleted file mode 100644 index c1330b86f8..0000000000 --- a/board/fennel/ec.tasklist +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/** - * See CONFIG_TASK_LIST in config.h for details. - */ -#define CONFIG_TASK_LIST \ - TASK_ALWAYS(HOOKS, hook_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(USB_CHG_P0, usb_charger_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_NOTEST(CHIPSET, chipset_task, NULL, LARGER_TASK_STACK_SIZE) \ - TASK_ALWAYS_RW(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(HOSTCMD, host_command_task, NULL, 1024) \ - TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, LARGER_TASK_STACK_SIZE) \ - TASK_ALWAYS(PD_C0, pd_task, NULL, 1280) \ - TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, 1024) \ - TASK_ALWAYS_RO(EMMC, emmc_task, NULL, LARGER_TASK_STACK_SIZE) diff --git a/board/fennel/gpio.inc b/board/fennel/gpio.inc deleted file mode 100644 index 29518fbc4e..0000000000 --- a/board/fennel/gpio.inc +++ /dev/null @@ -1,121 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* - * Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. - */ - -/* Interrupts */ -GPIO_INT(USB_C0_PD_INT_ODL, PIN(B, 1), GPIO_INT_FALLING | GPIO_PULL_UP, - tcpc_alert_event) -GPIO_INT(POWER_BUTTON_L, PIN(A, 0), GPIO_INT_BOTH | GPIO_PULL_UP, - power_button_interrupt) /* EC_PWR_BTN_ODL */ -GPIO_INT(AP_IN_SLEEP_L, PIN(C, 12), GPIO_INT_BOTH | GPIO_PULL_DOWN, - power_signal_interrupt) -GPIO_INT(PMIC_EC_RESETB, PIN(B, 7), GPIO_INT_BOTH | GPIO_PULL_DOWN, - power_signal_interrupt) -GPIO_INT(WARM_RESET_REQ, PIN(A, 3), GPIO_INT_RISING | GPIO_PULL_DOWN, - chipset_reset_request_interrupt) -GPIO_INT_RW(ACCEL_INT_ODL, PIN(A, 4), GPIO_INT_FALLING | GPIO_SEL_1P8V | GPIO_PULL_UP, - motion_interrupt) -GPIO_INT_RO(EMMC_CMD, PIN(B, 15), GPIO_INT_FALLING, - emmc_cmd_interrupt) -GPIO_INT(SPI1_NSS, PIN(A, 15), GPIO_INT_BOTH | GPIO_PULL_UP, - spi_event) /* SPI_AP_EC_CS_L */ -GPIO_INT(LID_OPEN, PIN(C, 5), GPIO_INT_BOTH, - lid_interrupt) -GPIO_INT(AC_PRESENT, PIN(A, 6), GPIO_INT_BOTH, - extpower_interrupt) /* ACOK_OD */ -GPIO_INT(BC12_EC_INT_ODL, PIN(C, 9), GPIO_INT_FALLING, - bc12_interrupt) -GPIO_INT(IT8801_SMB_INT, PIN(A, 8), GPIO_INT_FALLING | GPIO_PULL_UP, - io_expander_it8801_interrupt) /* KB_INT_ODL */ -GPIO_INT(AP_EC_WATCHDOG_L, PIN(D, 2), GPIO_INT_FALLING, - chipset_watchdog_interrupt) -GPIO_INT(TABLET_MODE_L, PIN(B, 11), GPIO_INT_BOTH, - gmr_tablet_switch_isr) - -/* Unimplemented interrupts */ -GPIO(ALS_RGB_INT_ODL, PIN(C, 10), GPIO_INPUT) - -/* Reset pins */ -GPIO(AP_SYS_RST_L, PIN(C, 11), GPIO_OUT_LOW) -GPIO(PMIC_WATCHDOG_L, PIN(A, 2), GPIO_OUT_LOW) -GPIO(PMIC_EN_ODL, PIN(F, 0), GPIO_ODR_HIGH) - -/* - * I2C pins should be configured as inputs until I2C module is - * initialized. This will avoid driving the lines unintentionally. - */ -GPIO(I2C1_SCL, PIN(B, 8), GPIO_INPUT) -GPIO(I2C1_SDA, PIN(B, 9), GPIO_INPUT) -GPIO(I2C2_SCL, PIN(A, 11), GPIO_INPUT) -GPIO(I2C2_SDA, PIN(A, 12), GPIO_INPUT) -GPIO(I2C3_SCL, PIN(A, 5), GPIO_ODR_HIGH) -GPIO(I2C3_SDA, PIN(C, 4), GPIO_ODR_HIGH) - -/* Analog pins */ -GPIO(BOARD_ID, PIN(C, 0), GPIO_ANALOG) -GPIO(EC_SKU_ID, PIN(B, 0), GPIO_ANALOG) - -/* Other input pins */ -GPIO(WP_L, PIN(C, 8), GPIO_INPUT) /* EC_FLASH_WP_ODL */ -GPIO(BOOT0, PIN(F, 11), GPIO_INPUT) -GPIO(CCD_MODE_ODL, PIN(A, 1), GPIO_INPUT) - -/* Other output pins */ -GPIO(EC_BATT_PRES_ODL, PIN(A, 7), GPIO_INPUT) -GPIO(EC_BL_EN_OD, PIN(A, 13), GPIO_ODR_HIGH) -GPIO(EN_USBA_5V, PIN(C, 14), GPIO_OUT_LOW) -GPIO(EC_SENSOR_SPI_MISO, PIN(C, 2), GPIO_INPUT) -GPIO(EC_SENSOR_SPI_MOSI, PIN(C, 3), GPIO_OUT_LOW) -GPIO(EC_SENSOR_SPI_NSS, PIN(B, 12), GPIO_OUT_HIGH) -GPIO(EC_SENSOR_SPI_CK, PIN(B, 10), GPIO_OUT_LOW) -GPIO(ENTERING_RW, PIN(C, 6), GPIO_ODR_HIGH) /* EC_ENTERING_RW_ODL */ -GPIO(EC_INT_L, PIN(C, 7), GPIO_ODR_HIGH) /* EC_AP_INT_ODL */ -GPIO(EC_BOARD_ID_EN_L, PIN(C, 15), GPIO_ODR_HIGH) /* EC_BOARD_ID_EN_ODL */ -GPIO(USB_C0_HPD_OD, PIN(F, 1), GPIO_ODR_LOW) -GPIO(BOOTBLOCK_EN_L, PIN(C, 1), GPIO_ODR_HIGH) -GPIO(EN_PP1800_S5_L, PIN(A, 14), GPIO_OUT_LOW) -GPIO(USB_C0_DISCHARGE, PIN(B, 6), GPIO_OUT_LOW) - -IOEX(PWR_LED_WHITE_L, EXPIN(0, 1, 4), GPIO_OUT_HIGH) -IOEX(BAT_LED_GREEN_FULL_L, EXPIN(0, 1, 3), GPIO_OUT_HIGH) -IOEX(BAT_LED_RED_L, EXPIN(0, 1, 2), GPIO_OUT_HIGH) -IOEX(KB_BL_EN, EXPIN(0, 0, 7), GPIO_OUT_LOW) - -/* - * TODO(b:138352732): On IT88801 expander, To be readded once IT8801 driver and - * gpio expander framework has landed. - */ -UNIMPLEMENTED(EN_PP5000_USBC) -UNIMPLEMENTED(PMIC_FORCE_RESET_ODL) -UNIMPLEMENTED(EN_USBC_CHARGE_L) - -/* USART1: PA9/PA10 */ -ALTERNATE(PIN_MASK(A, 0x0600), 1, MODULE_UART, 0) -/* I2C MASTER: PB8/9 */ -ALTERNATE(PIN_MASK(B, 0x0300), 1, MODULE_I2C, GPIO_ODR_HIGH ) -/* I2C MASTER: PA11/12 */ -ALTERNATE(PIN_MASK(A, 0x1800), 5, MODULE_I2C, GPIO_ODR_HIGH ) - - -/* SPI1 */ -/* SPI SLAVE: PB3/4/5 */ -ALTERNATE(PIN_MASK(B, 0x0038), 0, MODULE_SPI, 0) -/* SPI SLAVE CS: PA15 */ -ALTERNATE(PIN_MASK(A, 0x8000), 0, MODULE_SPI, 0) - -/* SPI2 */ -/* Shared between slave for emmc and master for bmi160 */ -/* They're mutually exclusive with gpio_config_module. */ -/* EMMC SPI SLAVE: PB13/14/15 */ -ALTERNATE(PIN_MASK(B, 0xE000), 0, MODULE_SPI_FLASH, 0) -/* SENSORS SPI MASTER: PB10, PB12, PC2, PC3 */ -ALTERNATE(PIN_MASK(B, 0x0400), 5, MODULE_SPI_CONTROLLER, 0) -ALTERNATE(PIN_MASK(C, 0x000C), 1, MODULE_SPI_CONTROLLER, 0) diff --git a/board/fennel/led.c b/board/fennel/led.c deleted file mode 100644 index 7d95c4807e..0000000000 --- a/board/fennel/led.c +++ /dev/null @@ -1,115 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Power and battery LED control for Fennel - */ -#include "common.h" -#include "ioexpander.h" -#include "driver/ioexpander/it8801.h" -#include "ec_commands.h" -#include "led_common.h" -#include "led_onoff_states.h" - -#define LED_ON_LVL 0 -#define LED_OFF_LVL 1 - -__override const int led_charge_lvl_1 = 5; -__override const int led_charge_lvl_2 = 97; - -__override struct led_descriptor - led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = { - [STATE_CHARGING_LVL_1] = {{EC_LED_COLOR_RED, LED_INDEFINITE} }, - [STATE_CHARGING_LVL_2] = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} }, - [STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_GREEN, LED_INDEFINITE} }, - [STATE_DISCHARGE_S0] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_DISCHARGE_S3] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_DISCHARGE_S5] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_BATTERY_ERROR] = {{EC_LED_COLOR_RED, 1 * LED_ONE_SEC}, - {LED_OFF, 1 * LED_ONE_SEC} }, - [STATE_FACTORY_TEST] = {{EC_LED_COLOR_RED, 2 * LED_ONE_SEC}, - {EC_LED_COLOR_GREEN, 2 * LED_ONE_SEC} }, -}; - -__override const struct led_descriptor - led_pwr_state_table[PWR_LED_NUM_STATES][LED_NUM_PHASES] = { - [PWR_LED_STATE_ON] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} }, - [PWR_LED_STATE_SUSPEND_AC] = {{EC_LED_COLOR_WHITE, 1 * LED_ONE_SEC}, - {LED_OFF, 3 * LED_ONE_SEC} }, - [PWR_LED_STATE_SUSPEND_NO_AC] = {{EC_LED_COLOR_WHITE, 1 * LED_ONE_SEC}, - {LED_OFF, 3 * LED_ONE_SEC} }, - [PWR_LED_STATE_OFF] = {{LED_OFF, LED_INDEFINITE} }, -}; - -const enum ec_led_id supported_led_ids[] = { - EC_LED_ID_BATTERY_LED, - EC_LED_ID_POWER_LED -}; -const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); - -__override void led_set_color_battery(enum ec_led_colors color) -{ - switch (color) { - case EC_LED_COLOR_GREEN: - ioex_set_level(IOEX_BAT_LED_GREEN_FULL_L, LED_ON_LVL); - ioex_set_level(IOEX_BAT_LED_RED_L, LED_OFF_LVL); - break; - case EC_LED_COLOR_AMBER: - ioex_set_level(IOEX_BAT_LED_GREEN_FULL_L, LED_ON_LVL); - ioex_set_level(IOEX_BAT_LED_RED_L, LED_ON_LVL); - break; - case EC_LED_COLOR_RED: - ioex_set_level(IOEX_BAT_LED_GREEN_FULL_L, LED_OFF_LVL); - ioex_set_level(IOEX_BAT_LED_RED_L, LED_ON_LVL); - break; - default: /* LED_OFF and other unsupported colors */ - ioex_set_level(IOEX_BAT_LED_GREEN_FULL_L, LED_OFF_LVL); - ioex_set_level(IOEX_BAT_LED_RED_L, LED_OFF_LVL); - break; - } -} - -__override void led_set_color_power(enum ec_led_colors color) -{ - switch (color) { - case EC_LED_COLOR_WHITE: - ioex_set_level(IOEX_PWR_LED_WHITE_L, LED_ON_LVL); - break; - default: - ioex_set_level(IOEX_PWR_LED_WHITE_L, LED_OFF_LVL); - break; - } -} - -void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) -{ - if (led_id == EC_LED_ID_BATTERY_LED) { - brightness_range[EC_LED_COLOR_GREEN] = 1; - brightness_range[EC_LED_COLOR_AMBER] = 1; - brightness_range[EC_LED_COLOR_RED] = 1; - } else if (led_id == EC_LED_ID_POWER_LED) { - brightness_range[EC_LED_COLOR_WHITE] = 1; - } -} - -int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness) -{ - if (led_id == EC_LED_ID_BATTERY_LED) { - if (brightness[EC_LED_COLOR_GREEN] != 0) - led_set_color_battery(EC_LED_COLOR_GREEN); - else if (brightness[EC_LED_COLOR_AMBER] != 0) - led_set_color_battery(EC_LED_COLOR_AMBER); - else if (brightness[EC_LED_COLOR_RED] != 0) - led_set_color_battery(EC_LED_COLOR_RED); - else - led_set_color_battery(LED_OFF); - } else if (led_id == EC_LED_ID_POWER_LED) { - if (brightness[EC_LED_COLOR_WHITE] != 0) - led_set_color_power(EC_LED_COLOR_WHITE); - else - led_set_color_power(LED_OFF); - } else { - return EC_ERROR_INVAL; - } - return EC_SUCCESS; -} diff --git a/board/fennel/vif_override.xml b/board/fennel/vif_override.xml deleted file mode 100644 index 32736caf64..0000000000 --- a/board/fennel/vif_override.xml +++ /dev/null @@ -1,3 +0,0 @@ -<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File - Definition from the USB-IF. ---> |