diff options
Diffstat (limited to 'board/fizz/board.h')
| -rw-r--r-- | board/fizz/board.h | 86 |
1 files changed, 41 insertions, 45 deletions
diff --git a/board/fizz/board.h b/board/fizz/board.h index ad1ca85cac..a1499f6105 100644 --- a/board/fizz/board.h +++ b/board/fizz/board.h @@ -1,4 +1,4 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. +/* Copyright 2017 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -12,7 +12,7 @@ * Allow dangerous commands. * TODO: Remove this config before production. */ -#undef CONFIG_SYSTEM_UNLOCKED +#undef CONFIG_SYSTEM_UNLOCKED #define CONFIG_USB_PD_COMM_LOCKED /* EC */ @@ -32,7 +32,7 @@ #define CONFIG_FPU #define CONFIG_I2C #define CONFIG_I2C_CONTROLLER -#undef CONFIG_LID_SWITCH +#undef CONFIG_LID_SWITCH #define CONFIG_POWER_BUTTON_IGNORE_LID #define CONFIG_PWM #define CONFIG_LTO @@ -47,7 +47,7 @@ #define WIRELESS_GPIO_WLAN_POWER GPIO_PP3300_DX_WLAN #define WIRELESS_GPIO_WWAN GPIO_PP3300_DX_LTE #define CEC_GPIO_OUT GPIO_CEC_OUT -#define CEC_GPIO_IN GPIO_CEC_IN +#define CEC_GPIO_IN GPIO_CEC_IN #define CEC_GPIO_PULL_UP GPIO_CEC_PULL_UP #define CONFIG_FANS 1 #undef CONFIG_FAN_INIT_SPEED @@ -63,7 +63,7 @@ #undef CONFIG_CMD_ADC /* Reduce flash space usage */ -#undef CONFIG_CONSOLE_CMDHELP +#undef CONFIG_CONSOLE_CMDHELP /* SOC */ #define CONFIG_CHIPSET_SKYLAKE @@ -71,8 +71,8 @@ #define CONFIG_CHIPSET_HAS_PRE_INIT_CALLBACK #define CONFIG_CHIPSET_RESET_HOOK #define CONFIG_HOST_INTERFACE_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 +#define CONFIG_HOST_INTERFACE_ESPI_VW_SLP_S3 +#define CONFIG_HOST_INTERFACE_ESPI_VW_SLP_S4 #define GPIO_PG_EC_RSMRST_ODL GPIO_RSMRST_L_PGOOD /* Charger */ @@ -82,7 +82,7 @@ #define CONFIG_HOSTCMD_PD_CONTROL #define CONFIG_EXTPOWER_GPIO -#undef CONFIG_EXTPOWER_DEBOUNCE_MS +#undef CONFIG_EXTPOWER_DEBOUNCE_MS #define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 #define CONFIG_POWER_BUTTON #define CONFIG_POWER_BUTTON_X86 @@ -96,7 +96,7 @@ #define CONFIG_TEMP_SENSOR_TMP432 /* USB */ -#undef CONFIG_USB_CHARGER /* dnojiri: verify */ +#undef CONFIG_USB_CHARGER /* dnojiri: verify */ #define CONFIG_USB_PD_ALT_MODE #define CONFIG_USB_PD_ALT_MODE_DFP #define CONFIG_USB_PD_CUSTOM_PDO @@ -119,7 +119,7 @@ #define CONFIG_USBC_VCONN_SWAP /* Charge ports */ -#undef CONFIG_DEDICATED_CHARGE_PORT_COUNT +#undef CONFIG_DEDICATED_CHARGE_PORT_COUNT #define CONFIG_DEDICATED_CHARGE_PORT_COUNT 1 #define DEDICATED_CHARGE_PORT 1 @@ -128,21 +128,21 @@ #define USB_PORT_COUNT 5 /* Optional feature to configure npcx chip */ -#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ -#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ -#define NPCX_TACH_SEL2 1 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ +#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ +#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ +#define NPCX_TACH_SEL2 1 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ /* I2C ports */ -#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 -#define I2C_PORT_EEPROM NPCX_I2C_PORT0_1 -#define I2C_PORT_BATTERY NPCX_I2C_PORT1 -#define I2C_PORT_CHARGER NPCX_I2C_PORT1 -#define I2C_PORT_PMIC NPCX_I2C_PORT2 -#define I2C_PORT_THERMAL NPCX_I2C_PORT3 +#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 +#define I2C_PORT_EEPROM NPCX_I2C_PORT0_1 +#define I2C_PORT_BATTERY NPCX_I2C_PORT1 +#define I2C_PORT_CHARGER NPCX_I2C_PORT1 +#define I2C_PORT_PMIC NPCX_I2C_PORT2 +#define I2C_PORT_THERMAL NPCX_I2C_PORT3 /* I2C addresses */ -#define I2C_ADDR_TCPC0_FLAGS 0x0b -#define I2C_ADDR_EEPROM_FLAGS 0x50 +#define I2C_ADDR_TCPC0_FLAGS 0x0b +#define I2C_ADDR_EEPROM_FLAGS 0x50 /* Verify and jump to RW image on boot */ #define CONFIG_VBOOT_EFS @@ -159,18 +159,17 @@ * end of RW_A and RW_B, respectively. */ #define CONFIG_RW_B -#define CONFIG_RW_B_MEM_OFF CONFIG_RO_MEM_OFF -#undef CONFIG_RO_SIZE -#define CONFIG_RO_SIZE (CONFIG_FLASH_SIZE_BYTES / 4) -#undef CONFIG_RW_SIZE -#define CONFIG_RW_SIZE CONFIG_RO_SIZE -#define CONFIG_RW_A_STORAGE_OFF CONFIG_RW_STORAGE_OFF -#define CONFIG_RW_B_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + \ - CONFIG_RW_SIZE) -#define CONFIG_RW_A_SIGN_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + \ - CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE) -#define CONFIG_RW_B_SIGN_STORAGE_OFF (CONFIG_RW_B_STORAGE_OFF + \ - CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE) +#define CONFIG_RW_B_MEM_OFF CONFIG_RO_MEM_OFF +#undef CONFIG_RO_SIZE +#define CONFIG_RO_SIZE (CONFIG_FLASH_SIZE_BYTES / 4) +#undef CONFIG_RW_SIZE +#define CONFIG_RW_SIZE CONFIG_RO_SIZE +#define CONFIG_RW_A_STORAGE_OFF CONFIG_RW_STORAGE_OFF +#define CONFIG_RW_B_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + CONFIG_RW_SIZE) +#define CONFIG_RW_A_SIGN_STORAGE_OFF \ + (CONFIG_RW_A_STORAGE_OFF + CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE) +#define CONFIG_RW_B_SIGN_STORAGE_OFF \ + (CONFIG_RW_B_STORAGE_OFF + CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE) #define CONFIG_RWSIG #define CONFIG_RWSIG_TYPE_RWSIG @@ -196,15 +195,12 @@ enum charge_port { }; enum temp_sensor_id { - TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */ - TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */ + TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */ + TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */ TEMP_SENSOR_COUNT }; -enum adc_channel { - ADC_VBUS, - ADC_CH_COUNT -}; +enum adc_channel { ADC_VBUS, ADC_CH_COUNT }; enum pwm_channel { PWM_CH_LED_RED, @@ -245,17 +241,17 @@ enum OEM_ID { * delay to turn on the power supply max is ~16ms. * delay to turn off the power supply max is about ~180ms. */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ +#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ +#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ /* delay to turn on/off vconn */ /* Define typical operating power. Since Fizz doesn't have a battery to charge, * we're not interested in any power lower than the AP power-on threshold. */ -#define PD_OPERATING_POWER_MW CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON -#define PD_MAX_POWER_MW 100000 -#define PD_MAX_CURRENT_MA 5000 -#define PD_MAX_VOLTAGE_MV 20000 +#define PD_OPERATING_POWER_MW CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON +#define PD_MAX_POWER_MW 100000 +#define PD_MAX_CURRENT_MA 5000 +#define PD_MAX_VOLTAGE_MV 20000 /* Board specific handlers */ void board_reset_pd_mcu(void); |