diff options
Diffstat (limited to 'board/fizz')
-rw-r--r-- | board/fizz/board.c | 834 | ||||
-rw-r--r-- | board/fizz/board.h | 263 | ||||
-rw-r--r-- | board/fizz/build.mk | 14 | ||||
-rw-r--r-- | board/fizz/dev_key.pem | 39 | ||||
-rw-r--r-- | board/fizz/ec.tasklist | 19 | ||||
-rw-r--r-- | board/fizz/gpio.inc | 114 | ||||
-rw-r--r-- | board/fizz/led.c | 232 | ||||
-rw-r--r-- | board/fizz/usb_pd_policy.c | 142 | ||||
-rw-r--r-- | board/fizz/vif_override.xml | 3 |
9 files changed, 0 insertions, 1660 deletions
diff --git a/board/fizz/board.c b/board/fizz/board.c deleted file mode 100644 index 5b830b9150..0000000000 --- a/board/fizz/board.c +++ /dev/null @@ -1,834 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Fizz board-specific configuration */ - -#include "adc.h" -#include "als.h" -#include "battery.h" -#include "bd99992gw.h" -#include "board_config.h" -#include "button.h" -#include "charge_manager.h" -#include "charge_state.h" -#include "charger.h" -#include "chipset.h" -#include "console.h" -#include "cros_board_info.h" -#include "driver/pmic_tps650x30.h" -#include "driver/temp_sensor/tmp432.h" -#include "driver/tcpm/ps8xxx.h" -#include "driver/tcpm/tcpci.h" -#include "driver/tcpm/tcpm.h" -#include "espi.h" -#include "extpower.h" -#include "espi.h" -#include "fan.h" -#include "fan_chip.h" -#include "gpio.h" -#include "hooks.h" -#include "host_command.h" -#include "i2c.h" -#include "math_util.h" -#include "pi3usb9281.h" -#include "power.h" -#include "power_button.h" -#include "pwm.h" -#include "pwm_chip.h" -#include "spi.h" -#include "switch.h" -#include "system.h" -#include "task.h" -#include "temp_sensor.h" -#include "timer.h" -#include "uart.h" -#include "usb_charge.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usb_pd_tcpm.h" -#include "util.h" - -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -static uint16_t board_version; -static uint8_t oem; -static uint8_t sku; - -static void tcpc_alert_event(enum gpio_signal signal) -{ - schedule_deferred_pd_interrupt(0 /* port */); -} - -#define ADP_DEBOUNCE_MS 1000 /* Debounce time for BJ plug/unplug */ -/* - * ADP_IN pin state. It's initialized to 1 (=unplugged) because the IRQ won't - * be triggered if BJ is the power source. - */ -static int adp_in_state = 1; - -static void adp_in_deferred(void); -DECLARE_DEFERRED(adp_in_deferred); -static void adp_in_deferred(void) -{ - struct charge_port_info pi = { 0 }; - int level = gpio_get_level(GPIO_ADP_IN_L); - - /* Debounce */ - if (level == adp_in_state) - return; - if (!level) { - /* BJ is inserted but the voltage isn't effective because PU3 - * is still disabled. */ - pi.voltage = 19500; - if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) - /* - * It doesn't matter what we set here because we'll - * brown out anyway when charge_manager switches - * input. - */ - pi.current = 3330; - } - charge_manager_update_charge(CHARGE_SUPPLIER_DEDICATED, - DEDICATED_CHARGE_PORT, &pi); - /* - * Explicitly notifies the host that BJ is plugged or unplugged - * (when running on a type-c adapter). - */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - adp_in_state = level; -} - -/* IRQ for BJ plug/unplug. It shouldn't be called if BJ is the power source. */ -void adp_in(enum gpio_signal signal) -{ - if (adp_in_state == gpio_get_level(GPIO_ADP_IN_L)) - return; - hook_call_deferred(&adp_in_deferred_data, ADP_DEBOUNCE_MS * MSEC); -} - -void vbus0_evt(enum gpio_signal signal) -{ - task_wake(TASK_ID_PD_C0); -} - -#include "gpio_list.h" - -/* Hibernate wake configuration */ -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_POWER_BUTTON_L, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/* ADC channels */ -const struct adc_t adc_channels[] = { - /* Vbus sensing (1/10 voltage divider). */ - [ADC_VBUS] = {"VBUS", NPCX_ADC_CH2, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0}, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -/******************************************************************************/ -/* Physical fans. These are logically separate from pwm_channels. */ -const struct fan_conf fan_conf_0 = { - .flags = FAN_USE_RPM_MODE, - .ch = MFT_CH_0, /* Use MFT id to control fan */ - .pgood_gpio = -1, - .enable_gpio = GPIO_FAN_PWR_EN, -}; - -const struct fan_rpm fan_rpm_0 = { - .rpm_min = 2200, - .rpm_start = 2200, - .rpm_max = 5600, -}; - -const struct fan_rpm fan_rpm_1 = { - .rpm_min = 2800, - .rpm_start = 2800, - .rpm_max = 5600, -}; - -struct fan_t fans[] = { - [FAN_CH_0] = { .conf = &fan_conf_0, .rpm = &fan_rpm_0, }, -}; -BUILD_ASSERT(ARRAY_SIZE(fans) == FAN_CH_COUNT); - -/******************************************************************************/ -/* MFT channels. These are logically separate from pwm_channels. */ -const struct mft_t mft_channels[] = { - [MFT_CH_0] = {NPCX_MFT_MODULE_2, TCKC_LFCLK, PWM_CH_FAN}, -}; -BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); - -/* I2C port map */ -const struct i2c_port_t i2c_ports[] = { - {"tcpc", NPCX_I2C_PORT0_0, 400, GPIO_I2C0_0_SCL, GPIO_I2C0_0_SDA}, - {"eeprom", NPCX_I2C_PORT0_1, 400, GPIO_I2C0_1_SCL, GPIO_I2C0_1_SDA}, - {"charger", NPCX_I2C_PORT1, 100, GPIO_I2C1_SCL, GPIO_I2C1_SDA}, - {"pmic", NPCX_I2C_PORT2, 400, GPIO_I2C2_SCL, GPIO_I2C2_SDA}, - {"thermal", NPCX_I2C_PORT3, 400, GPIO_I2C3_SCL, GPIO_I2C3_SDA}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -/* TCPC mux configuration */ -const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = NPCX_I2C_PORT0_0, - .addr_flags = I2C_ADDR_TCPC0_FLAGS, - }, - .drv = &ps8xxx_tcpm_drv, - }, -}; - -static int ps8751_tune_mux(const struct usb_mux *me) -{ - /* 0x98 sets lower EQ of DP port (4.5db) */ - mux_write(me, PS8XXX_REG_MUX_DP_EQ_CONFIGURATION, 0x98); - return EC_SUCCESS; -} - -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .usb_port = 0, - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, - .board_init = &ps8751_tune_mux, - } -}; - -const int usb_port_enable[USB_PORT_COUNT] = { - GPIO_USB1_ENABLE, - GPIO_USB2_ENABLE, - GPIO_USB3_ENABLE, - GPIO_USB4_ENABLE, - GPIO_USB5_ENABLE, -}; - -void board_reset_pd_mcu(void) -{ - gpio_set_level(GPIO_USB_C0_PD_RST_ODL, 0); - msleep(1); - gpio_set_level(GPIO_USB_C0_PD_RST_ODL, 1); -} - -void board_tcpc_init(void) -{ - int reg; - - /* This needs to be executed only once per boot. It could be run by RO - * if we boot in recovery mode. It could be run by RW if we boot in - * normal or dev mode. Note EFS makes RO jump to RW before HOOK_INIT. */ - board_reset_pd_mcu(); - - /* - * Wake up PS8751. If PS8751 remains in low power mode after sysjump, - * TCPM_INIT will fail due to not able to access PS8751. - * Note PS8751 A3 will wake on any I2C access. - */ - i2c_read8(I2C_PORT_TCPC0, I2C_ADDR_TCPC0_FLAGS, 0xA0, ®); - - /* Enable TCPC interrupts */ - gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL); - - /* - * Initialize HPD to low; after sysjump SOC needs to see - * HPD pulse to enable video path - */ - for (int port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; ++port) - usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED | - USB_PD_MUX_HPD_IRQ_DEASSERTED); -} -DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C+1); - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - - if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL)) { - if (gpio_get_level(GPIO_USB_C0_PD_RST_ODL)) - status |= PD_STATUS_TCPC_ALERT_0; - } - - return status; -} - -/* - * TMP431 has one local and one remote sensor. - * - * Temperature sensors data; must be in same order as enum temp_sensor_id. - * Sensor index and name must match those present in coreboot: - * src/mainboard/google/${board}/acpi/dptf.asl - */ -const struct temp_sensor_t temp_sensors[] = { - {"TMP431_Internal", TEMP_SENSOR_TYPE_BOARD, tmp432_get_val, - TMP432_IDX_LOCAL}, - {"TMP431_Sensor_1", TEMP_SENSOR_TYPE_BOARD, tmp432_get_val, - TMP432_IDX_REMOTE1}, -}; -BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); - -/* - * Thermal limits for each temp sensor. All temps are in degrees K. Must be in - * same order as enum temp_sensor_id. To always ignore any temp, use 0. - */ -struct ec_thermal_config thermal_params[] = { - /* {Twarn, Thigh, Thalt}, <on> - * {Twarn, Thigh, X }, <off> - * fan_off, fan_max - */ - {{0, C_TO_K(80), C_TO_K(81)}, {0, C_TO_K(78), 0}, - C_TO_K(4), C_TO_K(76)}, /* TMP431_Internal */ - {{0, 0, 0}, {0, 0, 0}, 0, 0}, /* TMP431_Sensor_1 */ -}; -BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT); - -/* Initialize PMIC */ -#define I2C_PMIC_READ(reg, data) \ - i2c_read8(I2C_PORT_PMIC, TPS650X30_I2C_ADDR1_FLAGS, (reg), (data)) - -#define I2C_PMIC_WRITE(reg, data) \ - i2c_write8(I2C_PORT_PMIC, TPS650X30_I2C_ADDR1_FLAGS, (reg), (data)) - -static void board_pmic_init(void) -{ - int err; - int error_count = 0; - static uint8_t pmic_initialized = 0; - - if (pmic_initialized) - return; - - /* Read vendor ID */ - while (1) { - int data; - err = I2C_PMIC_READ(TPS650X30_REG_VENDORID, &data); - if (!err && data == TPS650X30_VENDOR_ID) - break; - else if (error_count > 5) - goto pmic_error; - error_count++; - } - - /* - * VCCIOCNT register setting - * [6] : CSDECAYEN - * otherbits: default - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_VCCIOCNT, 0x4A); - if (err) - goto pmic_error; - - /* - * VRMODECTRL: - * [4] : VCCIOLPM clear - * otherbits: default - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_VRMODECTRL, 0x2F); - if (err) - goto pmic_error; - - /* - * PGMASK1 : Exclude VCCIO from Power Good Tree - * [7] : MVCCIOPG clear - * otherbits: default - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_PGMASK1, 0x80); - if (err) - goto pmic_error; - - /* - * PWFAULT_MASK1 Register settings - * [7] : 1b V4 Power Fault Masked - * [4] : 1b V7 Power Fault Masked - * [2] : 1b V9 Power Fault Masked - * [0] : 1b V13 Power Fault Masked - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_PWFAULT_MASK1, 0x95); - if (err) - goto pmic_error; - - /* - * Discharge control 4 register configuration - * [7:6] : 00b Reserved - * [5:4] : 01b V3.3S discharge resistance (V6S), 100 Ohm - * [3:2] : 01b V18S discharge resistance (V8S), 100 Ohm - * [1:0] : 01b V100S discharge resistance (V11S), 100 Ohm - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_DISCHCNT4, 0x15); - if (err) - goto pmic_error; - - /* - * Discharge control 3 register configuration - * [7:6] : 01b V1.8U_2.5U discharge resistance (V9), 100 Ohm - * [5:4] : 01b V1.2U discharge resistance (V10), 100 Ohm - * [3:2] : 01b V100A discharge resistance (V11), 100 Ohm - * [1:0] : 01b V085A discharge resistance (V12), 100 Ohm - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_DISCHCNT3, 0x55); - if (err) - goto pmic_error; - - /* - * Discharge control 2 register configuration - * [7:6] : 01b V5ADS3 discharge resistance (V5), 100 Ohm - * [5:4] : 01b V33A_DSW discharge resistance (V6), 100 Ohm - * [3:2] : 01b V33PCH discharge resistance (V7), 100 Ohm - * [1:0] : 01b V18A discharge resistance (V8), 100 Ohm - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_DISCHCNT2, 0x55); - if (err) - goto pmic_error; - - /* - * Discharge control 1 register configuration - * [7:2] : 00b Reserved - * [1:0] : 01b VCCIO discharge resistance (V4), 100 Ohm - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_DISCHCNT1, 0x01); - if (err) - goto pmic_error; - - /* - * Increase Voltage - * [7:0] : 0x2a default - * [5:4] : 10b default - * [5:4] : 01b 5.1V (0x1a) - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_V5ADS3CNT, 0x1a); - if (err) - goto pmic_error; - - /* - * PBCONFIG Register configuration - * [7] : 1b Power button debounce, 0ms (no debounce) - * [6] : 0b Power button reset timer logic, no action (default) - * [5:0] : 011111b Force an Emergency reset time, 31s (default) - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_PBCONFIG, 0x9F); - if (err) - goto pmic_error; - - /* - * V3.3A_DSW (VR3) control. Default: 0x2A. - * [7:6] : 00b Disabled - * [5:4] : 00b Vnom + 3%. (default: 10b 0%) - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_V33ADSWCNT, 0x0A); - if (err) - goto pmic_error; - - /* - * V100ACNT Register Field Description. Default: 0x2A - * [1:0] : 11b Forced PWM Operation. - * [5:4] : 01b Output Voltage Select Vnom (1V) - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_V100ACNT, 0x1B); - if (err) - goto pmic_error; - - CPRINTS("PMIC init done"); - pmic_initialized = 1; - return; - -pmic_error: - CPRINTS("PMIC init failed"); -} - -void chipset_pre_init_callback(void) -{ - board_pmic_init(); -} - -/** - * Notify the AC presence GPIO to the PCH. - */ -static void board_extpower(void) -{ - gpio_set_level(GPIO_PCH_ACPRESENT, extpower_is_present()); -} -DECLARE_HOOK(HOOK_AC_CHANGE, board_extpower, HOOK_PRIO_DEFAULT); - -/* Mapping to the old schematics */ -#define GPIO_U42_P GPIO_TYPE_C_60W -#define GPIO_U22_C GPIO_TYPE_C_65W - -/* - * Board version 2.1 or before uses a different current monitoring circuitry. - */ -static void set_charge_limit(int charge_ma) -{ - /* - * We have two FETs connected to two registers: PR257 & PR258. - * These control thresholds of the over current monitoring system. - * - * PR257, PR258 - * For 4.62A (90W BJ adapter), on, off - * For 3.33A (65W BJ adapter), off, on - * For 3.00A (Type-C adapter), off, off - * - * The over current monitoring system doesn't support less than 3A - * (e.g. 2.25A, 2.00A). These current most likely won't be enough to - * power the system. However, if they're needed, EC can monitor - * PMON_PSYS and trigger H_PROCHOT by itself. - */ - if (charge_ma >= 4620) { - gpio_set_level(GPIO_U42_P, 1); - gpio_set_level(GPIO_U22_C, 0); - } else if (charge_ma >= 3330) { - gpio_set_level(GPIO_U42_P, 0); - gpio_set_level(GPIO_U22_C, 1); - } else if (charge_ma >= 3000) { - gpio_set_level(GPIO_U42_P, 0); - gpio_set_level(GPIO_U22_C, 0); - } else { - /* TODO(http://crosbug.com/p/65013352) */ - CPRINTS("Current %dmA not supported", charge_ma); - } -} - -void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - int p87w = 0, p65w = 0, p60w = 0; - - /* - * Turn on/off power shortage alert. Performs the same check as - * system_can_boot_ap(). It's repeated here because charge_manager - * hasn't updated charge_current/voltage when board_set_charge_limit - * is called. - */ - led_alert(charge_ma * charge_mv < - CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON * 1000); - - /* - * In terms of timing, this should always work because - * HOOK_PRIO_CHARGE_MANAGER_INIT is notified after HOOK_PRIO_INIT_I2C. - * If CBI isn't initialized or contains invalid data, we assume it's - * a new board. - */ - if (0 < board_version && board_version < 0x0202) - return set_charge_limit(charge_ma); - /* - * We have three FETs connected to three registers: PR257, PR258, - * PR7824. These control the thresholds of the current monitoring - * system. - * - * PR257 PR7824 PR258 - * For BJ (65W or 90W) off off off - * For 4.35A (87W) on off off - * For 3.25A (65W) off off on - * For 3.00A (60W) off on off - * - * The system power consumption is capped by PR259, which is stuffed - * differently depending on the SKU (65W v.s. 90W or U42 v.s. U22). - * So, we only need to monitor type-c adapters. For example: - * - * a 90W system powered by 65W type-c charger - * b 65W system powered by 60W type-c charger - * c 65W system powered by 87W type-c charger - * - * In a case such as (c), we actually do not need to monitor the current - * because the max is capped by PR259. - * - * AP is expected to read type-c adapter wattage from EC and control - * power consumption to avoid over-current or system browns out. - * - */ - if (supplier != CHARGE_SUPPLIER_DEDICATED) { - /* Apple 87W charger offers 4.3A @20V. */ - if (charge_ma >= 4300) { - p87w = 1; - } else if (charge_ma >= 3250) { - p65w = 1; - } else if (charge_ma >= 3000) { - p60w = 1; - } else { - /* - * TODO:http://crosbug.com/p/65013352. - * The current monitoring system doesn't support lower - * current. These currents are most likely not enough to - * power the system. However, if they're needed, EC can - * monitor PMON_PSYS and trigger H_PROCHOT by itself. - */ - p60w = 1; - CPRINTS("Current %dmA not supported", charge_ma); - } - } - - gpio_set_level(GPIO_TYPE_C_87W, p87w); - gpio_set_level(GPIO_TYPE_C_65W, p65w); - gpio_set_level(GPIO_TYPE_C_60W, p60w); -} - -int64_t get_time_dsw_pwrok(void) -{ - /* DSW_PWROK is turned on before EC was powered. */ - return -20 * MSEC; -} - -const struct pwm_t pwm_channels[] = { - [PWM_CH_LED_RED] = { 3, PWM_CONFIG_DSLEEP, 100 }, - [PWM_CH_LED_GREEN] = { 5, PWM_CONFIG_DSLEEP, 100 }, - [PWM_CH_FAN] = {4, PWM_CONFIG_OPEN_DRAIN, 25000}, -}; -BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); - -struct fan_step { - int on; - int off; - int rpm; -}; - -static const struct fan_step *fan_table; - -/* Note: Do not make the fan on/off point equal to 0 or 100 */ -static const struct fan_step fan_table0[] = { - {.on = 0, .off = 1, .rpm = 0}, - {.on = 36, .off = 1, .rpm = 2800}, - {.on = 58, .off = 58, .rpm = 3200}, - {.on = 66, .off = 61, .rpm = 3400}, - {.on = 75, .off = 69, .rpm = 4200}, - {.on = 81, .off = 76, .rpm = 4800}, - {.on = 88, .off = 83, .rpm = 5200}, - {.on = 98, .off = 91, .rpm = 5600}, -}; -static const struct fan_step fan_table1[] = { - {.on = 0, .off = 1, .rpm = 0}, - {.on = 36, .off = 1, .rpm = 2800}, - {.on = 62, .off = 58, .rpm = 3200}, - {.on = 68, .off = 63, .rpm = 3400}, - {.on = 75, .off = 69, .rpm = 4200}, - {.on = 81, .off = 76, .rpm = 4800}, - {.on = 88, .off = 83, .rpm = 5200}, - {.on = 98, .off = 91, .rpm = 5600}, -}; -static const struct fan_step fan_table2[] = { - {.on = 0, .off = 1, .rpm = 0}, - {.on = 36, .off = 1, .rpm = 2200}, - {.on = 63, .off = 56, .rpm = 2900}, - {.on = 69, .off = 65, .rpm = 3000}, - {.on = 75, .off = 70, .rpm = 3300}, - {.on = 80, .off = 76, .rpm = 3600}, - {.on = 87, .off = 81, .rpm = 3900}, - {.on = 98, .off = 91, .rpm = 5000}, -}; -static const struct fan_step fan_table3[] = { - {.on = 0, .off = 1, .rpm = 0}, - {.on = 36, .off = 22, .rpm = 2500}, - {.on = 54, .off = 49, .rpm = 3200}, - {.on = 61, .off = 56, .rpm = 3500}, - {.on = 68, .off = 63, .rpm = 3900}, - {.on = 75, .off = 69, .rpm = 4500}, - {.on = 82, .off = 76, .rpm = 5100}, - {.on = 92, .off = 85, .rpm = 5400}, -}; -/* All fan tables must have the same number of levels */ -#define NUM_FAN_LEVELS ARRAY_SIZE(fan_table0) -BUILD_ASSERT(ARRAY_SIZE(fan_table1) == NUM_FAN_LEVELS); -BUILD_ASSERT(ARRAY_SIZE(fan_table2) == NUM_FAN_LEVELS); -BUILD_ASSERT(ARRAY_SIZE(fan_table3) == NUM_FAN_LEVELS); - -static void setup_fan(void) -{ - /* Configure Fan */ - switch (oem) { - case OEM_KENCH: - case OEM_TEEMO: - case OEM_BLEEMO: - default: - fans[FAN_CH_0].rpm = &fan_rpm_1; - fan_table = fan_table0; - break; - case OEM_SION: - fans[FAN_CH_0].rpm = &fan_rpm_1; - fan_table = fan_table1; - break; - case OEM_WUKONG_N: - case OEM_WUKONG_A: - case OEM_WUKONG_M: - fans[FAN_CH_0].rpm = &fan_rpm_0; - fan_table = fan_table2; - break; - case OEM_JAX: - fan_set_count(0); - break; - case OEM_EXCELSIOR: - fans[FAN_CH_0].rpm = &fan_rpm_0; - fan_table = fan_table3; - break; - } -} - -static void cbi_init(void) -{ - uint32_t val; - if (cbi_get_board_version(&val) == EC_SUCCESS && val <= UINT16_MAX) - board_version = val; - CPRINTS("Board Version: 0x%04x", board_version); - - if (cbi_get_oem_id(&val) == EC_SUCCESS && val < OEM_COUNT) - oem = val; - CPRINTS("OEM: %d", oem); - - if (cbi_get_sku_id(&val) == EC_SUCCESS && val <= UINT8_MAX) - sku = val; - CPRINTS("SKU: 0x%02x", sku); - - setup_fan(); -} -DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_INIT_I2C + 1); - -/* List of BJ adapters shipped with Fizz or its variants */ -enum bj_adapter { - BJ_65W_19V, - BJ_90W_19V, - BJ_65W_19P5V, - BJ_90W_19P5V, -}; - -/* BJ adapter specs */ -static const struct charge_port_info bj_adapters[] = { - [BJ_65W_19V] = { .current = 3420, .voltage = 19000 }, - [BJ_90W_19V] = { .current = 4740, .voltage = 19000 }, - [BJ_65W_19P5V] = { .current = 3330, .voltage = 19500 }, - [BJ_90W_19P5V] = { .current = 4620, .voltage = 19500 }, -}; - -/* - * Bit masks to map SKU ID to BJ adapter wattage. 1:90W 0:65W - * KBL-R i7 8550U 4 90 - * KBL-R i5 8250U 5 90 - * KBL-R i3 8130U 6 90 - * KBL-U i7 7600 3 65 - * KBL-U i5 7500 2 65 - * KBL-U i3 7100 1 65 - * KBL-U Celeron 3965 7 65 - * KBL-U Celeron 3865 0 65 - */ -#define BJ_ADAPTER_90W_MASK (BIT(4) | BIT(5) | BIT(6)) - -static void setup_bj(void) -{ - enum bj_adapter bj; - - switch (oem) { - case OEM_KENCH: - bj = (BJ_ADAPTER_90W_MASK & BIT(sku)) ? - BJ_90W_19P5V : BJ_65W_19P5V; - break; - case OEM_TEEMO: - case OEM_BLEEMO: - case OEM_SION: - case OEM_WUKONG_N: - case OEM_WUKONG_A: - case OEM_WUKONG_M: - case OEM_EXCELSIOR: - bj = (BJ_ADAPTER_90W_MASK & BIT(sku)) ? - BJ_90W_19V : BJ_65W_19V; - break; - case OEM_JAX: - bj = BJ_65W_19V; - break; - default: - bj = (BJ_ADAPTER_90W_MASK & BIT(sku)) ? - BJ_90W_19P5V : BJ_65W_19P5V; - break; - } - - charge_manager_update_charge(CHARGE_SUPPLIER_DEDICATED, - DEDICATED_CHARGE_PORT, &bj_adapters[bj]); -} - -/* - * Since fizz has no battery, it must source all of its power from either - * USB-C or the barrel jack (preferred). Fizz operates in continuous safe - * mode (charge_manager_leave_safe_mode() will never be called), which - * modifies port / ILIM selection as follows: - * - * - Dual-role / dedicated capability of the port partner is ignored. - * - Charge ceiling on PD voltage transition is ignored. - * - CHARGE_PORT_NONE will never be selected. - */ -static void board_charge_manager_init(void) -{ - enum charge_port port; - int i, j; - - /* Initialize all charge suppliers to 0 */ - for (i = 0; i < CHARGE_PORT_COUNT; i++) { - for (j = 0; j < CHARGE_SUPPLIER_COUNT; j++) - charge_manager_update_charge(j, i, NULL); - } - - port = gpio_get_level(GPIO_ADP_IN_L) ? - CHARGE_PORT_TYPEC0 : CHARGE_PORT_BARRELJACK; - CPRINTS("Power source is p%d (%s)", port, - port == CHARGE_PORT_TYPEC0 ? "USB-C" : "BJ"); - - /* Initialize the power source supplier */ - switch (port) { - case CHARGE_PORT_TYPEC0: - typec_set_input_current_limit(port, 3000, 5000); - break; - case CHARGE_PORT_BARRELJACK: - setup_bj(); - break; - } -} -DECLARE_HOOK(HOOK_INIT, board_charge_manager_init, - HOOK_PRIO_CHARGE_MANAGER_INIT + 1); - -static void board_init(void) -{ - /* Provide AC status to the PCH */ - board_extpower(); - - gpio_enable_interrupt(GPIO_USB_C0_VBUS_WAKE_L); -} -DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); - -int fan_percent_to_rpm(int fan, int pct) -{ - static int current_level; - static int previous_pct; - int i; - - /* - * Compare the pct and previous pct, we have the three paths : - * 1. decreasing path. (check the off point) - * 2. increasing path. (check the on point) - * 3. invariant path. (return the current RPM) - */ - if (pct < previous_pct) { - for (i = current_level; i >= 0; i--) { - if (pct <= fan_table[i].off) - current_level = i - 1; - else - break; - } - } else if (pct > previous_pct) { - for (i = current_level + 1; i < NUM_FAN_LEVELS; i++) { - if (pct >= fan_table[i].on) - current_level = i; - else - break; - } - } - - if (current_level < 0) - current_level = 0; - - previous_pct = pct; - - if (fan_table[current_level].rpm != - fan_get_rpm_target(FAN_CH(fan))) - cprints(CC_THERMAL, "Setting fan RPM to %d", - fan_table[current_level].rpm); - - return fan_table[current_level].rpm; -} diff --git a/board/fizz/board.h b/board/fizz/board.h deleted file mode 100644 index d0cccd09ac..0000000000 --- a/board/fizz/board.h +++ /dev/null @@ -1,263 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Eve board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* - * Allow dangerous commands. - * TODO: Remove this config before production. - */ -#undef CONFIG_SYSTEM_UNLOCKED -#define CONFIG_USB_PD_COMM_LOCKED - -/* EC */ -#define CONFIG_ADC -#define CONFIG_BOARD_VERSION_CBI -#define CONFIG_BOARD_HAS_RTC_RESET -#define CONFIG_CRC8 -#define CONFIG_CEC -#define CONFIG_CBI_EEPROM -#define CONFIG_DEDICATED_RECOVERY_BUTTON -#define CONFIG_EMULATED_SYSRQ -#define CONFIG_LED_COMMON -#define CONFIG_MKBP_INPUT_DEVICES -#define CONFIG_MKBP_USE_HOST_EVENT -#define CONFIG_DPTF -#define CONFIG_FLASH_SIZE_BYTES 0x80000 -#define CONFIG_FPU -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#undef CONFIG_LID_SWITCH -#define CONFIG_POWER_BUTTON_IGNORE_LID -#define CONFIG_PWM -#define CONFIG_LTO -#define CONFIG_CHIP_PANIC_BACKUP -#define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25X40 -#define CONFIG_WATCHDOG_HELP -#define CONFIG_WIRELESS -#define CONFIG_WIRELESS_SUSPEND \ - (EC_WIRELESS_SWITCH_WLAN | EC_WIRELESS_SWITCH_WLAN_POWER) -#define WIRELESS_GPIO_WLAN GPIO_WLAN_OFF_L -#define WIRELESS_GPIO_WLAN_POWER GPIO_PP3300_DX_WLAN -#define WIRELESS_GPIO_WWAN GPIO_PP3300_DX_LTE -#define CEC_GPIO_OUT GPIO_CEC_OUT -#define CEC_GPIO_IN GPIO_CEC_IN -#define CEC_GPIO_PULL_UP GPIO_CEC_PULL_UP -#define CONFIG_FANS 1 -#undef CONFIG_FAN_INIT_SPEED -#define CONFIG_FAN_INIT_SPEED 50 -#define CONFIG_FAN_DYNAMIC -#define CONFIG_FAN_RPM_CUSTOM -#define CONFIG_THROTTLE_AP -#define CONFIG_CHIPSET_CAN_THROTTLE -#define CONFIG_PWM - -/* EC console commands */ -#define CONFIG_CMD_BUTTON - -/* SOC */ -#define CONFIG_CHIPSET_SKYLAKE -#define CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESET -#define CONFIG_CHIPSET_HAS_PRE_INIT_CALLBACK -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 - -/* Charger */ -#define CONFIG_CHARGE_MANAGER - -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 50000 - -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_EXTPOWER_GPIO -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_BUTTON_INIT_IDLE -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30 -#define CONFIG_DELAY_DSW_PWROK_TO_PWRBTN - -/* Sensor */ -#define CONFIG_TEMP_SENSOR -#define CONFIG_TEMP_SENSOR_TMP432 - -/* USB */ -#undef CONFIG_USB_CHARGER /* dnojiri: verify */ -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_CUSTOM_PDO -#define CONFIG_USB_PD_DISCHARGE_TCPC -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_PORT_MAX_COUNT 1 -#define CONFIG_USB_PD_VBUS_DETECT_GPIO -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TCPM_PS8751 -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV1 -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP - -/* Charge ports */ -#undef CONFIG_DEDICATED_CHARGE_PORT_COUNT -#define CONFIG_DEDICATED_CHARGE_PORT_COUNT 1 -#define DEDICATED_CHARGE_PORT 1 - -/* USB-A config */ -#define CONFIG_USB_PORT_POWER_DUMB -#define USB_PORT_COUNT 5 - -/* Optional feature to configure npcx chip */ -#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ -#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ -#define NPCX_TACH_SEL2 1 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ - -/* I2C ports */ -#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 -#define I2C_PORT_EEPROM NPCX_I2C_PORT0_1 -#define I2C_PORT_BATTERY NPCX_I2C_PORT1 -#define I2C_PORT_CHARGER NPCX_I2C_PORT1 -#define I2C_PORT_PMIC NPCX_I2C_PORT2 -#define I2C_PORT_THERMAL NPCX_I2C_PORT3 - -/* I2C addresses */ -#define I2C_ADDR_TCPC0_FLAGS 0x0b -#define I2C_ADDR_EEPROM_FLAGS 0x50 - -/* Verify and jump to RW image on boot */ -#define CONFIG_VBOOT_EFS -#define CONFIG_VBOOT_HASH -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 - -/* - * Flash layout. Since config_flash_layout.h is included before board.h, - * we can only overwrite (=undef/define) these parameters here. - * - * Flash stores 3 images: RO, RW_A, RW_B. We divide the flash by 4. - * A public key is stored at the end of RO. Signatures are stored at the - * end of RW_A and RW_B, respectively. - */ -#define CONFIG_RW_B -#define CONFIG_RW_B_MEM_OFF CONFIG_RO_MEM_OFF -#undef CONFIG_RO_SIZE -#define CONFIG_RO_SIZE (CONFIG_FLASH_SIZE_BYTES / 4) -#undef CONFIG_RW_SIZE -#define CONFIG_RW_SIZE CONFIG_RO_SIZE -#define CONFIG_RW_A_STORAGE_OFF CONFIG_RW_STORAGE_OFF -#define CONFIG_RW_B_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + \ - CONFIG_RW_SIZE) -#define CONFIG_RW_A_SIGN_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + \ - CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE) -#define CONFIG_RW_B_SIGN_STORAGE_OFF (CONFIG_RW_B_STORAGE_OFF + \ - CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE) - -#define CONFIG_RWSIG -#define CONFIG_RWSIG_TYPE_RWSIG -#define CONFIG_RSA -#ifdef SECTION_IS_RO -#define CONFIG_RSA_OPTIMIZED -#endif -#define CONFIG_SHA256 -#ifdef SECTION_IS_RO -#define CONFIG_SHA256_UNROLLED -#endif -#define CONFIG_RSA_KEY_SIZE 3072 -#define CONFIG_RSA_EXPONENT_3 - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -enum charge_port { - CHARGE_PORT_TYPEC0, - CHARGE_PORT_BARRELJACK, -}; - -enum temp_sensor_id { - TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */ - TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */ - TEMP_SENSOR_COUNT -}; - -enum adc_channel { - ADC_VBUS, - ADC_CH_COUNT -}; - -enum pwm_channel { - PWM_CH_LED_RED, - PWM_CH_LED_GREEN, - PWM_CH_FAN, - /* Number of PWM channels */ - PWM_CH_COUNT -}; - -enum fan_channel { - FAN_CH_0, - /* Number of FAN channels */ - FAN_CH_COUNT -}; - -enum mft_channel { - MFT_CH_0, - /* Number of MFT channels */ - MFT_CH_COUNT -}; - -enum OEM_ID { - OEM_KENCH = 0, - OEM_TEEMO = 1, - OEM_SION = 2, - OEM_WUKONG_N = 3, - OEM_WUKONG_A = 4, - OEM_WUKONG_M = 5, - OEM_BLEEMO = 6, - OEM_JAX = 8, - OEM_EXCELSIOR = 10, - /* Number of OEM IDs */ - OEM_COUNT -}; - -/* TODO(crosbug.com/p/61098): Verify the numbers below. */ -/* - * delay to turn on the power supply max is ~16ms. - * delay to turn off the power supply max is about ~180ms. - */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* delay to turn on/off vconn */ - -/* Define typical operating power. Since Fizz doesn't have a battery to charge, - * we're not interested in any power lower than the AP power-on threshold. */ -#define PD_OPERATING_POWER_MW CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON -#define PD_MAX_POWER_MW 100000 -#define PD_MAX_CURRENT_MA 5000 -#define PD_MAX_VOLTAGE_MV 20000 - -/* Board specific handlers */ -void board_reset_pd_mcu(void); -void board_set_tcpc_power_mode(int port, int mode); -void led_alert(int enable); -void led_critical(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ diff --git a/board/fizz/build.mk b/board/fizz/build.mk deleted file mode 100644 index 74094ac834..0000000000 --- a/board/fizz/build.mk +++ /dev/null @@ -1,14 +0,0 @@ -# -*- makefile -*- -# Copyright 2017 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Board specific files build -# - -CHIP:=npcx -CHIP_VARIANT:=npcx5m6g - -board-y=board.o -board-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o -board-y+=led.o diff --git a/board/fizz/dev_key.pem b/board/fizz/dev_key.pem deleted file mode 100644 index b72c787613..0000000000 --- a/board/fizz/dev_key.pem +++ /dev/null @@ -1,39 +0,0 @@ ------BEGIN RSA PRIVATE KEY----- -MIIG4gIBAAKCAYEAseZZZlXXDP+KrjqV+XhP0ZgPlU5mX4GCm27yzTqcKiFWLlHZ -3f8seGG0lKNiL7WvHim8uSEDaPbp2us4uaJ6nTHEpbSGi2QVp90tE3aJG34HyKlg -jcaE1r/0n6ynG/bf0Xx4O63Plp3Czi3TBYW49vT6+T/Jyfl2JpGQ9KNcD0umafsv -uaEmdrLGrzjN8w1mFZfwscFkfVDh0cdiFNJ+UkTSpO9/yPapXbo4/lOMwdO9xILF -cEZV9I7K7lBSvQ5Uep+w0SqNPTh2cGhoeEeDyH+Ce0LA8H7ZwbVnwLe1RswF9Wek -uzqp9lMSNkkwMtTkumTuJLLGJX9rc0MVQTKgNV8wIzizf5lkCCBCJLf7aRBaeWCJ -cXjKiavSPOZXDcnqCWqRJT3jN4ibAsU1GQtqLa8pTAi2wkE0fjuvAWK3NYuvpukg -qNq2LI+BJkF4+dCZoeB1PDNyFNzdOFvkxj2+ImS3DLlPYVng4vHsTK1HRUUpL5Ag -jjfMhMs4NC7HMOCTAgEDAoIBgHaZkO7j5LNVBx7RuVD63+EQCmOJmZUBAbz0od4n -EsbA5B7hO+lUyFBBIw3CQXUjyhQb0yYWAkX58Tyc0HvBpxN2gxkjBFztY8U+Hgz5 -sLz+r9sblbPZreR/+GpzGhKklTZS+tJz37m+gd7JN1kD0KSjUft/29v7pBm2YKMX -krTdGZv8ynvAxE8h2col3qII7rkP9cvWQv416+EvlriMVDbYjG30/9tPG5PRe1Q3 -syvifoMB2PWEOU20h0mK4dNe4d7E96s1Q+RTmTUtyipxUp6d4PIufAjMtM8yfkb0 -/0z81IsWQ0NOhefrMAi8TEcDkbyNSBPqHqbqH2FosFWo2cU3r6TXv2LdvFzc5BA+ -U6c+fXz7BDjv+NT3Bh98whKvTdJYcIgSg6vqzW7ZWJWWllZQtpJnQccIq4sPaL4S -osFg8jd1kcbjVakCN0wYtfvMa/+WBZNNsZLUHoeIJvO7qnT7VKzhceoKHCJCMxNR -Ypu5eELxCwebTXiImDqmFsKIawKBwQDpDjff6eatHbjmGV1elTyV5MLi95Tc0T7P -FZHC1KLXkA/mEuXjAGfoZuLB5a3WmrA8r8fWNZoKV+0RBKIs3at1JFxZn9YiA0Hy -5qmnYkXjMaY4p5AyO3eJsc2kbsh9r0cy2cb5GdwFDApeoVICoQh+dW9FpvIS+9AF -0DVc2/Rg//cuXLlCMonF+PZVmDxRNhjBvwvRjxeowiu2ntI4sa83nHMhXI/RfvV4 -xcSng8gSIvabUmunDcPKvqO3rnpHzVECgcEAw2oFcHDAuZ1Xuopb2ghLRK3uLQVy -BnqLu9QYk3OTe8C3PrNZ80R5MgtnZ0kP8bTZ4uE6MJ3+IMhPUCFqk9euGGdMUlU+ -SUmHie5CZPg4CwD4BUBy6dVdwId7aTxrdBOuGwwhYAhBsJxcfd3eNgiALcCoKsbi -BLhjJ9Rch2rOsnpNJVwMvFMr6RM33oQrrufe4MBhDa/QD9yDtnDYH/KPO09E6AqU -sMvBNsjbCC9rSYv+L9QkW8EUhT+wJIcqxUajAoHBAJtez+qb7x4T0JlmPj8OKGPt -10H6Yz3g1IoOYSyNweUKtUQMmUIARUWZ7IFDyTm8dX3KhTl5EVw6ngtYbB3pHPjC -6Du/5Bas1qHvG8TsLpd2btBvtXbST7EhM8L0hakfhMyRL1C76ANdXD8WNqxrWv74 -9NkZ9rdSiq6Kzj3n+ECqpMmTJiwhsS6l+Y5lfYt5ZdZ/XTZfZRssHSRp4XshH3po -TMDoX+D/TlCD2G+tMAwXTxI28m9egocpwnp0UYUziwKBwQCCRq5K9dXRE4/RsZKR -WtzYc/QeA6FZpwfSjWW3omJSgHopzOaiLaYhXO+aMLVLzeaXQNF1vqlrMDTgFkcN -OnQQRN2MONQw26+xSYGYpXqyAKVY1aHxOOkrBPzw0vJNYnQSCBZABYEgaD2pPpQk -BarJKxrHL0FYeuzFOD2vnInMUYjDkrMoN3KbYiU/AsfJ7+nrKutedTVf6FfO9eVq -obTSNNiasbh13St52zywH5zbsql1OBg9K2MDf8rDBMcuLxcCgcBfM9FWZivdG2tJ -5REvL0vPAQfcjVi4HUHvnaCuwMYEuF5T2Xf9P8d8ZflfWHaGlkl/qPvE897fns2l -PZvvhRnr9GlHKt940ZOTI2v+hjlwcHGAAQc+p7BcKeUYLChwhVK/cZ9f6ZCotZNh -543ecG4KZiJaqBZ/mDRaW7Py0w6lbOAzprrHF3ChvQ6VAllajoWx4CeINRcxX2vP -bAPZxvt0gwpoHtUAsZo/bKEF0sM5qM/fK43gH5KhJeunq/xHO7E= ------END RSA PRIVATE KEY----- diff --git a/board/fizz/ec.tasklist b/board/fizz/ec.tasklist deleted file mode 100644 index 75a09a43df..0000000000 --- a/board/fizz/ec.tasklist +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* - * See CONFIG_TASK_LIST in config.h for details. - */ - -#define CONFIG_TASK_LIST \ - TASK_ALWAYS(HOOKS, hook_task, NULL, 2048) \ - /* Larger stack for RW verification (i.e. sha256, rsa) */ \ - TASK_NOTEST(CHIPSET, chipset_task, NULL, TASK_STACK_SIZE) \ - TASK_ALWAYS(HOSTCMD, host_command_task, NULL, 2048) \ - TASK_ALWAYS(CONSOLE, console_task, NULL, LARGER_TASK_STACK_SIZE) \ - TASK_ALWAYS(POWERBTN, power_button_task, NULL, LARGER_TASK_STACK_SIZE) \ - TASK_ALWAYS(PD_C0, pd_task, NULL, LARGER_TASK_STACK_SIZE) \ - TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, TASK_STACK_SIZE) \ - TASK_ALWAYS(CEC, cec_task, NULL, TASK_STACK_SIZE) diff --git a/board/fizz/gpio.inc b/board/fizz/gpio.inc deleted file mode 100644 index 7da0bfce71..0000000000 --- a/board/fizz/gpio.inc +++ /dev/null @@ -1,114 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. */ - -GPIO_INT(USB_C0_PD_INT_ODL, PIN(3, 7), GPIO_INT_FALLING | GPIO_PULL_UP, tcpc_alert_event) -GPIO_INT(AC_PRESENT, PIN(C, 1), GPIO_INT_BOTH, extpower_interrupt) -GPIO_INT(POWER_BUTTON_L, PIN(0, 4), GPIO_INT_BOTH | GPIO_PULL_UP, power_button_interrupt) /* MECH_PWR_BTN_ODL */ - -GPIO_INT(PCH_SLP_S0_L, PIN(7, 5), GPIO_INT_BOTH, power_signal_interrupt) -#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -GPIO_INT(PCH_SLP_S3_L, PIN(7, 3), GPIO_INT_BOTH, power_signal_interrupt) -#endif -#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S4 -GPIO_INT(PCH_SLP_S4_L, PIN(8, 6), GPIO_INT_BOTH, power_signal_interrupt) -#endif -GPIO_INT(PCH_SLP_SUS_L, PIN(6, 2), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(RSMRST_L_PGOOD, PIN(B, 0), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(PMIC_DPWROK, PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(WP_L, PIN(9, 3), GPIO_INT_BOTH, switch_interrupt) -GPIO_INT(ADP_IN_L, PIN(C, 5), GPIO_INT_BOTH | GPIO_PULL_UP, adp_in) /* Low: BJ detected */ -GPIO_INT(USB_C0_VBUS_WAKE_L, PIN(9, 7), GPIO_INT_BOTH | GPIO_PULL_UP, vbus0_evt) -GPIO_INT(RECOVERY_L, PIN(8, 2), GPIO_INT_BOTH, button_interrupt) /* Recovery button */ -GPIO(PCH_RTCRST, PIN(E, 7), GPIO_OUT_LOW) /* RTCRST# to SOC */ -GPIO(WLAN_OFF_L, PIN(7, 2), GPIO_OUT_LOW) /* Disable WLAN */ -GPIO(PP3300_DX_WLAN, PIN(A, 7), GPIO_OUT_LOW) /* Enable WLAN 3.3V Power */ -GPIO(CPU_PROCHOT, PIN(8, 1), GPIO_OUT_HIGH) /* PROCHOT# to SOC */ -GPIO(PCH_ACPRESENT, PIN(5, 0), GPIO_ODR_LOW) /* ACOK to SOC */ -GPIO(PCH_WAKE_L, PIN(A, 3), GPIO_ODR_HIGH) /* Wake SOC */ -GPIO(PCH_RSMRST_L, PIN(7, 0), GPIO_OUT_LOW) /* RSMRST# to SOC */ -GPIO(PCH_PWRBTN_L, PIN(7, 4), GPIO_ODR_HIGH) /* Power Button to SOC */ -GPIO(EC_PLATFORM_RST, PIN(4, 5), GPIO_OUT_LOW) /* EC Reset to LDO_EN */ -GPIO(SYS_RESET_L, PIN(6, 1), GPIO_ODR_HIGH) /* Cold Reset to SOC */ -GPIO(PMIC_SLP_SUS_L, PIN(8, 5), GPIO_OUT_LOW) /* SLP_SUS# to PMIC */ -GPIO(CCD_MODE_ODL, PIN(6, 3), GPIO_INPUT) /* Case Closed Debug Mode */ -GPIO(EC_HAVEN_RESET_ODL, PIN(0, 2), GPIO_ODR_HIGH) /* H1 Reset */ -GPIO(ENTERING_RW, PIN(7, 6), GPIO_OUTPUT) /* EC Entering RW */ -GPIO(PMIC_INT_L, PIN(6, 0), GPIO_INPUT) /* PMIC interrupt */ -GPIO(TYPE_C_60W, PIN(3, 3), GPIO_OUTPUT | GPIO_PULL_DOWN) -GPIO(TYPE_C_65W, PIN(3, 4), GPIO_OUTPUT | GPIO_PULL_DOWN) -GPIO(TYPE_C_87W, PIN(4, 4), GPIO_OUTPUT | GPIO_PULL_DOWN) -GPIO(POWER_RATE, PIN(7, 1), GPIO_INPUT) /* High: i3/5/7. Low: Celeron */ - -/* Fizz specific pins */ -GPIO(LAN_PWR_EN, PIN(8, 3), GPIO_OUT_HIGH) /* Ethernet power enabled */ - -GPIO(PP5000_DX_NFC, PIN(1, 5), GPIO_OUTPUT) - -GPIO(PP3300_DX_CAM, PIN(1, 0), GPIO_OUT_HIGH) -GPIO(CAM_PMIC_RST_L, PIN(0, 7), GPIO_INPUT) - -GPIO(WLAN_PE_RST, PIN(1, 2), GPIO_OUTPUT) -GPIO(PP3300_DX_LTE, PIN(0, 5), GPIO_OUT_LOW) -GPIO(PP3300_DX_BASE, PIN(1, 1), GPIO_OUT_LOW) - -/* I2C pins - these will be reconfigured for alternate function below */ -GPIO(I2C0_0_SCL, PIN(B, 5), GPIO_INPUT) /* EC_I2C_USB_C0_PD_SCL */ -GPIO(I2C0_0_SDA, PIN(B, 4), GPIO_INPUT) /* EC_I2C_USB_C0_PD_SDA */ -GPIO(I2C0_1_SCL, PIN(B, 3), GPIO_INPUT) /* EC_I2C_EEPROM_SCL */ -GPIO(I2C0_1_SDA, PIN(B, 2), GPIO_INPUT) /* EC_I2C_EEPROM_SDA */ -GPIO(I2C1_SCL, PIN(9, 0), GPIO_INPUT) /* EC_I2C_BAT_SCL */ -GPIO(I2C1_SDA, PIN(8, 7), GPIO_INPUT) /* EC_I2C_BAT_SDA */ -GPIO(I2C2_SCL, PIN(9, 2), GPIO_INPUT) /* EC_ROP_I2C_CLK */ -GPIO(I2C2_SDA, PIN(9, 1), GPIO_INPUT) /* EC_ROP_I2C_SDA */ -GPIO(I2C3_SCL, PIN(D, 1), GPIO_INPUT) /* EC_THEM_CLK */ -GPIO(I2C3_SDA, PIN(D, 0), GPIO_INPUT) /* EC_THEM_SDA */ - -/* 5V enables: INPUT=1.5A, OUT_LOW=OFF, OUT_HIGH=3A */ -GPIO(USB_C0_5V_EN, PIN(4, 2), GPIO_OUT_LOW | GPIO_PULL_UP) /* C0 5V Enable */ -GPIO(USB_C0_CHARGE_L, PIN(C, 0), GPIO_OUT_LOW) /* C0 Charge enable */ -GPIO(AC_JACK_CHARGE_L, PIN(C, 3), GPIO_OUT_LOW) /* AC jack charge enable */ -GPIO(USB_C0_PD_RST_ODL, PIN(0, 3), GPIO_OUT_LOW) /* C0 PD Reset */ -GPIO(USB_C0_DP_HPD, PIN(9, 4), GPIO_INPUT) /* C0 DP Hotplug Detect */ -GPIO(USB_C0_TCPC_PWR, PIN(8, 4), GPIO_OUT_LOW) /* Enable C0 TCPC Power */ -GPIO(FAN_PWR_EN, PIN(9, 5), GPIO_OUT_HIGH) /* Fan power */ -GPIO(USB1_ENABLE, PIN(3, 2), GPIO_OUT_LOW) /* Rear port, bottom */ -GPIO(USB2_ENABLE, PIN(C, 6), GPIO_OUT_LOW) /* Rear port, top */ -GPIO(USB3_ENABLE, PIN(A, 1), GPIO_OUT_LOW) /* Rear port, single */ -GPIO(USB4_ENABLE, PIN(0, 0), GPIO_OUT_LOW) /* Front port 1 */ -GPIO(USB5_ENABLE, PIN(B, 1), GPIO_OUT_LOW) /* Front port 2 */ -GPIO(USB_A_CHARGE_EN_L, PIN(A, 5), GPIO_OUT_LOW) - -GPIO(CEC_OUT, PIN(3, 6), GPIO_OUT_HIGH | GPIO_OPEN_DRAIN) -GPIO(CEC_IN, PIN(4, 0), GPIO_INPUT) -GPIO(CEC_PULL_UP, PIN(D, 3), GPIO_OUT_HIGH) - -/* Board ID */ -GPIO(BOARD_VERSION1, PIN(C, 4), GPIO_INPUT) /* Board ID bit0 */ -GPIO(BOARD_VERSION2, PIN(C, 2), GPIO_INPUT) /* Board ID bit1 */ -GPIO(BOARD_VERSION3, PIN(0, 1), GPIO_INPUT) /* Board ID bit2 */ - -/* Test points */ -GPIO(TP248, PIN(5, 7), GPIO_INPUT | GPIO_PULL_UP) /* EC_GPIO57 */ -GPIO(TP249, PIN(6, 6), GPIO_INPUT | GPIO_PULL_UP) /* EC_GPO66_ARM_L */ -GPIO(TP250, PIN(3, 5), GPIO_INPUT | GPIO_PULL_UP) /* EC_GPIO35_TEST_L */ - -/* Alternate functions GPIO definitions */ -ALTERNATE(PIN_MASK(6, 0x30), 1, MODULE_UART, 0) /* GPIO64-65 */ /* UART from EC to Servo */ -ALTERNATE(PIN_MASK(8, 0x80), 1, MODULE_I2C, 0) /* GPIO87 */ /* EC_I2C1_3V3_SDA */ -ALTERNATE(PIN_MASK(9, 0x01), 1, MODULE_I2C, 0) /* GPIO90 */ /* EC_I2C1_3V3_SCL */ -ALTERNATE(PIN_MASK(9, 0x06), 1, MODULE_I2C, 0) /* GPIO91-92 */ /* EC_I2C2_PMIC_3V3_SDA/SCL */ -ALTERNATE(PIN_MASK(A, 0x40), 1, MODULE_PWM, 0) /* GPIOA6 */ /* TACH2 */ -ALTERNATE(PIN_MASK(B, 0x30), 1, MODULE_I2C, 0) /* GPIOB4-B5 */ /* EC_I2C0_0_USBC_3V3_SDA/SCL */ -ALTERNATE(PIN_MASK(B, 0x40), 1, MODULE_PWM, 0) /* GPIOB6 */ /* EC_FAN_PWM */ -ALTERNATE(PIN_MASK(B, 0x0C), 1, MODULE_I2C, 0) /* GPOPB2-B3 */ /* EC_I2C0_1_3V3_SDA/SCL */ -ALTERNATE(PIN_MASK(D, 0x03), 1, MODULE_I2C, 0) /* GPIOD0-D1 */ /* EC_I2C3_SENSOR_1V8_SDA/SCL */ -/* Alternate functions for LED PWM */ -ALTERNATE(PIN_MASK(8, 0x01), 1, MODULE_PWM, 0) /* GPIO80 PWM3 Red*/ -ALTERNATE(PIN_MASK(B, 0x80), 1, MODULE_PWM, 0) /* GPOB7 PWM5 Green*/ diff --git a/board/fizz/led.c b/board/fizz/led.c deleted file mode 100644 index 9b6942d241..0000000000 --- a/board/fizz/led.c +++ /dev/null @@ -1,232 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Power and battery LED control for Fizz - */ - -#include "chipset.h" -#include "console.h" -#include "ec_commands.h" -#include "gpio.h" -#include "hooks.h" -#include "led_common.h" -#include "pwm.h" -#include "timer.h" -#include "util.h" - -const enum ec_led_id supported_led_ids[] = {EC_LED_ID_POWER_LED}; -const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); - -enum led_color { - LED_OFF = 0, - LED_RED, - LED_GREEN, - LED_AMBER, - - /* Number of colors, not a color itself */ - LED_COLOR_COUNT -}; - -static int set_color_power(enum led_color color, int duty) -{ - int green = 0; - int red = 0; - - if (duty < 0 || 100 < duty) - return EC_ERROR_UNKNOWN; - - switch (color) { - case LED_OFF: - break; - case LED_GREEN: - green = 1; - break; - case LED_RED: - red = 1; - break; - case LED_AMBER: - green = 1; - red = 1; - break; - default: - return EC_ERROR_UNKNOWN; - } - - if (red) - pwm_set_duty(PWM_CH_LED_RED, duty); - else - pwm_set_duty(PWM_CH_LED_RED, 0); - - if (green) - pwm_set_duty(PWM_CH_LED_GREEN, duty); - else - pwm_set_duty(PWM_CH_LED_GREEN, 0); - - return EC_SUCCESS; -} - -static int set_color(enum ec_led_id id, enum led_color color, int duty) -{ - switch (id) { - case EC_LED_ID_POWER_LED: - return set_color_power(color, duty); - default: - return EC_ERROR_UNKNOWN; - } -} - -#define LED_PULSE_US (2 * SECOND) -/* 40 msec for nice and smooth transition. */ -#define LED_PULSE_TICK_US (40 * MSEC) - -/* When pulsing is enabled, brightness is incremented by <duty_inc> every - * <interval> usec from 0 to 100% in LED_PULSE_US usec. Then it's decremented - * likewise in LED_PULSE_US usec. */ -static struct { - uint32_t interval; - int duty_inc; - enum led_color color; - int duty; -} led_pulse; - -#define CONFIG_TICK(interval, color) \ - config_tick((interval), 100 / (LED_PULSE_US / (interval)), (color)) - -static void config_tick(uint32_t interval, int duty_inc, enum led_color color) -{ - led_pulse.interval = interval; - led_pulse.duty_inc = duty_inc; - led_pulse.color = color; - led_pulse.duty = 0; -} - -static void pulse_power_led(enum led_color color) -{ - set_color(EC_LED_ID_POWER_LED, color, led_pulse.duty); - if (led_pulse.duty + led_pulse.duty_inc > 100) - led_pulse.duty_inc = led_pulse.duty_inc * -1; - else if (led_pulse.duty + led_pulse.duty_inc < 0) - led_pulse.duty_inc = led_pulse.duty_inc * -1; - led_pulse.duty += led_pulse.duty_inc; -} - -static void led_tick(void); -DECLARE_DEFERRED(led_tick); -static void led_tick(void) -{ - uint32_t elapsed; - uint32_t next = 0; - uint32_t start = get_time().le.lo; - static uint8_t pwm_enabled = 0; - - if (!pwm_enabled) { - pwm_enable(PWM_CH_LED_RED, 1); - pwm_enable(PWM_CH_LED_GREEN, 1); - pwm_enabled = 1; - } - if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED)) - pulse_power_led(led_pulse.color); - elapsed = get_time().le.lo - start; - next = led_pulse.interval > elapsed ? led_pulse.interval - elapsed : 0; - hook_call_deferred(&led_tick_data, next); -} - -static void led_suspend(void) -{ - CONFIG_TICK(LED_PULSE_TICK_US, LED_GREEN); - led_tick(); -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, led_suspend, HOOK_PRIO_DEFAULT); - -static void led_shutdown(void) -{ - hook_call_deferred(&led_tick_data, -1); - if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED)) - set_color(EC_LED_ID_POWER_LED, LED_OFF, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, led_shutdown, HOOK_PRIO_DEFAULT); - -static void led_resume(void) -{ - /* Assume there is no race condition with led_tick, which also - * runs in hook_task. */ - hook_call_deferred(&led_tick_data, -1); - if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED)) - set_color(EC_LED_ID_POWER_LED, LED_GREEN, 100); -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, led_resume, HOOK_PRIO_DEFAULT); - -void led_alert(int enable) -{ - if (enable) { - /* Overwrite the current signal */ - config_tick(1 * SECOND, 100, LED_RED); - led_tick(); - } else { - /* Restore the previous signal */ - if (chipset_in_state(CHIPSET_STATE_ON)) - led_resume(); - else if (chipset_in_state(CHIPSET_STATE_SUSPEND)) - led_suspend(); - else if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) - led_shutdown(); - } -} - -void led_critical(void) -{ - hook_call_deferred(&led_tick_data, -1); - if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED)) - set_color(EC_LED_ID_POWER_LED, LED_RED, 100); -} - -static int command_led(int argc, char **argv) -{ - enum ec_led_id id = EC_LED_ID_POWER_LED; - - if (argc < 2) - return EC_ERROR_PARAM_COUNT; - - if (!strcasecmp(argv[1], "debug")) { - led_auto_control(id, !led_auto_control_is_enabled(id)); - ccprintf("o%s\n", led_auto_control_is_enabled(id) ? "ff" : "n"); - } else if (!strcasecmp(argv[1], "off")) { - set_color(id, LED_OFF, 0); - } else if (!strcasecmp(argv[1], "red")) { - set_color(id, LED_RED, 100); - } else if (!strcasecmp(argv[1], "green")) { - set_color(id, LED_GREEN, 100); - } else if (!strcasecmp(argv[1], "amber")) { - set_color(id, LED_AMBER, 100); - } else if (!strcasecmp(argv[1], "alert")) { - led_alert(1); - } else if (!strcasecmp(argv[1], "crit")) { - led_critical(); - } else { - return EC_ERROR_PARAM1; - } - return EC_SUCCESS; -} -DECLARE_CONSOLE_COMMAND(led, command_led, - "[debug|red|green|amber|off|alert|crit]", - "Turn on/off LED."); - -void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) -{ - brightness_range[EC_LED_COLOR_RED] = 100; - brightness_range[EC_LED_COLOR_GREEN] = 100; - brightness_range[EC_LED_COLOR_AMBER] = 100; -} - -int led_set_brightness(enum ec_led_id id, const uint8_t *brightness) -{ - if (brightness[EC_LED_COLOR_RED]) - return set_color(id, LED_RED, brightness[EC_LED_COLOR_RED]); - else if (brightness[EC_LED_COLOR_GREEN]) - return set_color(id, LED_GREEN, brightness[EC_LED_COLOR_GREEN]); - else if (brightness[EC_LED_COLOR_AMBER]) - return set_color(id, LED_AMBER, brightness[EC_LED_COLOR_AMBER]); - else - return set_color(id, LED_OFF, 0); -} diff --git a/board/fizz/usb_pd_policy.c b/board/fizz/usb_pd_policy.c deleted file mode 100644 index 5de57f3c9b..0000000000 --- a/board/fizz/usb_pd_policy.c +++ /dev/null @@ -1,142 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "atomic.h" -#include "extpower.h" -#include "charge_manager.h" -#include "common.h" -#include "console.h" -#include "driver/tcpm/anx74xx.h" -#include "driver/tcpm/ps8xxx.h" -#include "gpio.h" -#include "hooks.h" -#include "host_command.h" -#include "registers.h" -#include "system.h" -#include "task.h" -#include "timer.h" -#include "util.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usb_pd_tcpm.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -#define PDO_FIXED_FLAGS (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP |\ - PDO_FIXED_COMM_CAP) - -const uint32_t pd_src_pdo[] = { - PDO_FIXED(5000, 3000, PDO_FIXED_FLAGS), -}; -const int pd_src_pdo_cnt = ARRAY_SIZE(pd_src_pdo); - -const uint32_t pd_snk_pdo[] = { - PDO_FIXED(5000, 500, PDO_FIXED_FLAGS), - PDO_BATT(4750, 21000, 50000), - PDO_VAR(4750, 21000, 3000), -}; -const int pd_snk_pdo_cnt = ARRAY_SIZE(pd_snk_pdo); - -int board_vbus_source_enabled(int port) -{ - if (port != 0) - return 0; - return gpio_get_level(GPIO_USB_C0_5V_EN); -} - -int pd_set_power_supply_ready(int port) -{ - /* Disable charging */ - gpio_set_level(GPIO_USB_C0_CHARGE_L, 1); - - /* Enable VBUS source */ - gpio_set_level(GPIO_USB_C0_5V_EN, 1); - - /* notify host of power info change */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; /* we are ready */ -} - -void pd_power_supply_reset(int port) -{ - /* Disable VBUS source */ - gpio_set_level(GPIO_USB_C0_5V_EN, 0); - - /* notify host of power info change */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_snk_is_vbus_provided(int port) -{ - return !gpio_get_level(GPIO_USB_C0_VBUS_WAKE_L); -} - -__override int pd_check_power_swap(int port) -{ - /* If type-c port is supplying power, we never swap PR (to source) */ - if (port == charge_manager_get_active_charge_port()) - return 0; - /* - * Allow power swap as long as we are acting as a dual role device, - * otherwise assume our role is fixed (not in S0 or console command - * to fix our role). - */ - return pd_get_dual_role(port) == PD_DRP_TOGGLE_ON ? 1 : 0; -} - -int pd_check_vconn_swap(int port) -{ - /* in G3, do not allow vconn swap since pp5000_A rail is off */ - return gpio_get_level(GPIO_PMIC_SLP_SUS_L); -} - -int board_set_active_charge_port(int port) -{ - const int active_port = charge_manager_get_active_charge_port(); - - if (port < 0 || CHARGE_PORT_COUNT <= port) - return EC_ERROR_INVAL; - - if (port == active_port) - return EC_SUCCESS; - - /* Don't charge from a source port */ - if (board_vbus_source_enabled(port)) - return EC_ERROR_INVAL; - - CPRINTS("New charger p%d", port); - - switch (port) { - case CHARGE_PORT_TYPEC0: - /* This is connected to TP on board version 2.2+ thus no-op */ - gpio_set_level(GPIO_USB_C0_CHARGE_L, 0); - gpio_set_level(GPIO_AC_JACK_CHARGE_L, 1); - gpio_enable_interrupt(GPIO_ADP_IN_L); - break; - case CHARGE_PORT_BARRELJACK: - /* Make sure BJ adapter is sourcing power */ - if (gpio_get_level(GPIO_ADP_IN_L)) - return EC_ERROR_INVAL; - /* This will cause brown out when switching from type-c on - * board version 2.2+ thus the rest of the code is no-op. */ - gpio_set_level(GPIO_AC_JACK_CHARGE_L, 0); - /* If type-c voltage > BJ voltage, we'll brown out due to the - * reverse current protection of PU3 but it's intended. */ - gpio_set_level(GPIO_USB_C0_CHARGE_L, 1); - gpio_disable_interrupt(GPIO_ADP_IN_L); - break; - default: - return EC_ERROR_INVAL; - } - - return EC_SUCCESS; -} - -int board_get_battery_soc(void) -{ - return 100; -} diff --git a/board/fizz/vif_override.xml b/board/fizz/vif_override.xml deleted file mode 100644 index 32736caf64..0000000000 --- a/board/fizz/vif_override.xml +++ /dev/null @@ -1,3 +0,0 @@ -<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File - Definition from the USB-IF. ---> |