diff options
Diffstat (limited to 'board/fleex')
| -rw-r--r-- | board/fleex/analyzestack.yaml | 278 | ||||
| -rw-r--r-- | board/fleex/battery.c | 320 | ||||
| -rw-r--r-- | board/fleex/board.c | 333 | ||||
| -rw-r--r-- | board/fleex/board.h | 125 | ||||
| -rw-r--r-- | board/fleex/build.mk | 16 | ||||
| -rw-r--r-- | board/fleex/ec.tasklist | 25 | ||||
| -rw-r--r-- | board/fleex/gpio.inc | 193 | ||||
| -rw-r--r-- | board/fleex/led.c | 80 | ||||
| -rw-r--r-- | board/fleex/usb_pd_policy.c | 8 | ||||
| -rw-r--r-- | board/fleex/vif_override.xml | 3 |
10 files changed, 0 insertions, 1381 deletions
diff --git a/board/fleex/analyzestack.yaml b/board/fleex/analyzestack.yaml deleted file mode 100644 index 08c8ba93a9..0000000000 --- a/board/fleex/analyzestack.yaml +++ /dev/null @@ -1,278 +0,0 @@ -# Size of extra stack frame needed by exception context switch. -# See core/cortex-m/switch.S -exception_frame_size: 224 -# Missing calls -add: - # TCPC stack - tcpm_set_cc[driver/tcpm/tcpm.h:139]: - - tcpci_tcpm_set_cc - tcpm_set_rx_enable[driver/tcpm/tcpm.h:160]: - - tcpci_tcpm_set_rx_enable - tcpm_set_snk_ctrl[driver/tcpm/tcpm.h:179]: - - tcpci_tcpm_set_snk_ctrl - tcpm_get_cc[driver/tcpm/tcpm.h:124]: - - tcpci_tcpm_get_cc - enter_low_power_mode[driver/usb_mux.c:42]: - - tcpci_enter_low_power_mode - svdm_exit_dp_mode[baseboard/octopus/usb_pd_policy.c:346]: - - anx7447_tcpc_update_hpd_status - - ps8xxx_tcpc_update_hpd_status - tcpm_set_src_ctrl[driver/tcpm/tcpm.h:187]: - - tcpci_tcpm_set_src_ctrl - tcpm_init[driver/tcpm/tcpm.h:106]: - - anx7447_init - - tcpci_tcpm_init - tcpm_get_vbus_level[driver/tcpm/tcpm.h:129]: - - anx7447_tcpm_get_vbus_level - - tcpci_tcpm_get_vbus_level - baseboard_tcpc_init[baseboard/octopus/baseboard.c:212]: - - anx7447_tcpc_update_hpd_status - - ps8xxx_tcpc_update_hpd_status - tcpm_get_chip_info[driver/tcpm/tcpm.h:240]: - - tcpci_get_chip_info - - ps8xxx_get_chip_info - tcpm_transmit[driver/tcpm/tcpm.h:172]: - - tcpci_tcpm_transmit - - ps8xxx_tcpm_transmit - tcpc_alert[driver/tcpm/tcpm.h:195]: - - anx7447_tcpc_alert - - tcpci_tcpc_alert - tcpm_set_msg_header[driver/tcpm/tcpm.h:154]: - - tcpci_tcpm_set_msg_header - tcpm_set_vconn[driver/tcpm/tcpm.h:149]: - - tcpci_tcpm_set_vconn - tcpm_select_rp_value[driver/tcpm/tcpm.h:134]: - - tcpci_tcpm_select_rp_value - tcpm_enqueue_message[driver/tcpm/tcpci.c:404]: - - tcpci_tcpm_get_message_raw - svdm_dp_post_config[baseboard/octopus/usb_pd_policy.c:320]: - - anx7447_tcpc_update_hpd_status - - ps8xxx_tcpc_update_hpd_status - svdm_dp_attention[baseboard/octopus/usb_pd_policy.c:335]: - - anx7447_tcpc_update_hpd_status - - ps8xxx_tcpc_update_hpd_status - tcpm_release[driver/tcpm/tcpm.h:119]: - - anx7447_release - - ps8xxx_tcpm_release - tcpm_set_polarity[driver/tcpm/tcpm.h:144]: - - tcpci_tcpm_set_polarity - tcpm_enable_drp_toggle[driver/tcpm/tcpm.h:211]: - - tcpci_tcpc_drp_toggle - tcpm_enter_low_power_mode[driver/tcpm/tcpm.h:218]: - - tcpci_enter_low_power_mode - # USB mux - usb_mux_flip[driver/usb_mux.c:163]: - - anx7447_mux_get - - tcpci_tcpm_mux_get - usb_mux_flip[driver/usb_mux.c:174]: - - anx7447_mux_set - - tcpci_tcpm_mux_set - usb_mux_set[driver/usb_mux.c:112]: - - anx7447_mux_set - - tcpci_tcpm_mux_set - usb_mux_init[driver/usb_mux.c:64]: - - anx7447_mux_init - - tcpci_tcpm_mux_init - usb_mux_get[driver/usb_mux.c:140]: - - anx7447_mux_get - - tcpci_tcpm_mux_get - hc_usb_pd_mux_info[driver/usb_mux.c:240]: - - anx7447_mux_get - - tcpci_tcpm_mux_get - # PPC - ppc_is_sourcing_vbus[common/usbc_ppc.c:42]: - - nx20p348x_is_sourcing_vbus - ppc_init[common/usbc_ppc.c:26]: - - nx20p348x_init - ppc_vbus_sink_enable[common/usbc_ppc.c:86]: - - nx20p348x_vbus_sink_enable - ppc_discharge_vbus[common/usbc_ppc.c:68]: - - nx20p348x_discharge_vbus - ppc_vbus_source_enable[common/usbc_ppc.c:107]: - - nx20p348x_vbus_source_enable - ppc_set_vbus_source_current_limit[common/usbc_ppc.c:60]: - - nx20p348x_set_vbus_source_current_limit - command_ppc_dump[common/usbc_ppc.c:135]: - - nx20p348x_dump - # Motion sensors - command_accelrange[common/motion_sense.c:1513]: - - set_range[driver/accel_lis2dh.c] - - set_range[driver/accelgyro_lsm6dsm.c] - command_accelrange[common/motion_sense.c:1519]: - - get_range[driver/accel_lis2dh.c] - - get_range[driver/accelgyro_lsm6dsm.c] - motion_sensor_time_to_read[common/motion_sense.c:213]: - - st_get_data_rate[driver/stm_mems_common.c] - motion_sense_read[common/motion_sense.c:694]: - - st_get_data_rate[driver/stm_mems_common.c] - motion_sense_read[common/motion_sense.c:707]: - - read[driver/accel_lis2dh.c] - - read[driver/accelgyro_lsm6dsm.c] - motion_sense_process[common/motion_sense.c:719]: - - irq_handler[driver/accelgyro_lsm6dsm.c] - sensor_init_done[common/motion_sense.c:468]: - - set_range[driver/accel_lis2dh.c] - - set_range[driver/accelgyro_lsm6dsm.c] - sensor_init_done[common/motion_sense.c:471]: - - get_range[driver/accel_lis2dh.c] - - get_range[driver/accelgyro_lsm6dsm.c] - motion_sense_set_ec_rate_from_ap[common/motion_sense.c:305]: - - st_get_data_rate[driver/stm_mems_common.c] - host_cmd_motion_sense[common/motion_sense.c:1242]: - - set_range[driver/accel_lis2dh.c] - - set_range[driver/accelgyro_lsm6dsm.c] - host_cmd_motion_sense[common/motion_sense.c:1253]: - - get_range[driver/accel_lis2dh.c] - - get_range[driver/accelgyro_lsm6dsm.c] - host_cmd_motion_sense[common/motion_sense.c:1268]: - - st_set_offset[driver/stm_mems_common.c] - host_cmd_motion_sense[common/motion_sense.c:1303]: - - None - host_cmd_motion_sense[common/motion_sense.c:1306]: - - st_get_offset[driver/stm_mems_common.c] - motion_sense_init[common/motion_sense.c:447]: - - init[driver/accel_lis2dh.c] - - init[driver/accelgyro_lsm6dsm.c] - motion_sense_set_data_rate[common/motion_sense.c:267]: - - set_data_rate[driver/accel_lis2dh.c] - - set_data_rate[driver/accelgyro_lsm6dsm.c] - motion_sense_set_data_rate[common/motion_sense.c:287]: - - st_get_data_rate[driver/stm_mems_common.c] - motion_sense_set_motion_intervals[common/motion_sense.c:411]: - - st_get_data_rate[driver/stm_mems_common.c] - calculate_lid_angle[common/motion_lid.c:385]: - - get_range[driver/accelgyro_lsm6dsm.c] - calculate_lid_angle[common/motion_lid.c:386]: - - get_range[driver/accel_lis2dh.c] - motion_sense_set_data_rate[common/motion_sense.c:286]: - - st_get_data_rate[driver/stm_mems_common.c] - command_accel_read_xyz[common/motion_sense.c:1657]: - - read[driver/accel_lis2dh.c] - - read[driver/accelgyro_lsm6dsm.c] - host_cmd_motion_sense[common/motion_sense.c:1294]: - - None - host_cmd_motion_sense[common/motion_sense.c:1297]: - - st_get_offset[driver/stm_mems_common.c] - command_accelresolution[common/motion_sense.c:1562]: - - None - command_accelresolution[common/motion_sense.c:1566]: - - st_get_resolution[driver/stm_mems_common.c] - command_accelrange[common/motion_sense.c:1518]: - - get_range[driver/accel_lis2dh.c] - - get_range[driver/accelgyro_lsm6dsm.c] - st_normalize[driver/stm_mems_common.c:137]: - - get_range[driver/accel_lis2dh.c] - - get_range[driver/accelgyro_lsm6dsm.c] - command_accel_data_rate[common/motion_sense.c:1621]: - - st_get_data_rate[driver/stm_mems_common.c] - # Misc. - host_send_response[common/host_command.c:153]: - - host_packet_respond - pd_dfp_enter_mode[common/usb_pd_policy.c:465]: - - svdm_enter_dp_mode[baseboard/octopus/usb_pd_policy.c] - - svdm_enter_gfu_mode[baseboard/octopus/usb_pd_policy.c] - pd_svdm[common/usb_pd_policy.c:773]: - - svdm_dp_status[baseboard/octopus/usb_pd_policy.c] - - svdm_gfu_status[baseboard/octopus/usb_pd_policy.c] - pd_svdm[common/usb_pd_policy.c:784]: - - svdm_dp_config[baseboard/octopus/usb_pd_policy.c] - - svdm_gfu_config[baseboard/octopus/usb_pd_policy.c] - pd_svdm[common/usb_pd_policy.c:790]: - - svdm_dp_post_config[baseboard/octopus/usb_pd_policy.c] - dfp_consume_attention[common/usb_pd_policy.c:503]: - - svdm_dp_attention[baseboard/octopus/usb_pd_policy.c] - - svdm_gfu_attention[baseboard/octopus/usb_pd_policy.c] - kblight_set_deferred[common/keyboard_backlight.c:35]: - - kblight_pwm_set - temp_sensor_read[common/temp_sensor.c:26]: - - charge_get_battery_temp - - get_temp_3v3_51k1_47k_4050b - - get_temp_3v3_13k7_47k_4050b - kblight_enable[common/keyboard_backlight.c:61]: - - kblight_pwm_enable - host_packet_respond[common/host_command.c:240]: - - lpc_send_response - kblight_init[common/keyboard_backlight.c:28]: - - kblight_pwm_init - vfnprintf[common/printf.c:75]: - - __tx_char - vfnprintf[common/printf.c:88]: - - __tx_char - vfnprintf[common/printf.c:96]: - - __tx_char - vfnprintf[common/printf.c:171]: - - __tx_char - vfnprintf[common/printf.c:172]: - - __tx_char - vfnprintf[common/printf.c:310]: - - __tx_char - vfnprintf[common/printf.c:315]: - - __tx_char - vfnprintf[common/printf.c:318]: - - __tx_char - pd_dfp_exit_mode[common/usb_pd_policy.c:569]: - - svdm_exit_dp_mode[baseboard/octopus/usb_pd_policy.c] - - svdm_exit_gfu_mode[baseboard/octopus/usb_pd_policy.c] - pd_dfp_exit_mode[common/usb_pd_policy.c:586]: - - svdm_exit_dp_mode[baseboard/octopus/usb_pd_policy.c] - - svdm_exit_gfu_mode[baseboard/octopus/usb_pd_policy.c] - # Indirect callsites in common structures - likely common for all boards - handle_command[common/console.c:248]: - - { name: __cmds, stride: 16, offset: 4 } - host_command_process[common/host_command.c:704]: - - { name: __hcmds, stride: 12, offset: 0 } - mkbp_get_next_event[common/mkbp_event.c:160]: - - { name: __mkbp_evt_srcs, stride: 8, offset: 4 } - hook_task[common/hooks.c:199]: - - { name: __deferred_funcs, stride: 4, offset: 0 } - # Note: This assumes worse case, where all hook functions can be called from - # any hook_notify call - # Generate using `grep hooks_.*_end build/$BOARD/R*/ec.R*.smap | - # sed -e 's/.*\(__hooks.*\)_end/ - { name: \1, stride: 8, offset: 0 }/' | - # sort -u` - hook_notify[common/hooks.c:129]: - - { name: __hooks_ac_change, stride: 8, offset: 0 } - - { name: __hooks_base_attached_change, stride: 8, offset: 0 } - - { name: __hooks_battery_soc_change, stride: 8, offset: 0 } - - { name: __hooks_chipset_pre_init, stride: 8, offset: 0 } - - { name: __hooks_chipset_reset, stride: 8, offset: 0 } - - { name: __hooks_chipset_resume, stride: 8, offset: 0 } - - { name: __hooks_chipset_shutdown, stride: 8, offset: 0 } - - { name: __hooks_chipset_startup, stride: 8, offset: 0 } - - { name: __hooks_chipset_suspend, stride: 8, offset: 0 } - - { name: __hooks_freq_change, stride: 8, offset: 0 } - - { name: __hooks_init, stride: 8, offset: 0 } - - { name: __hooks_lid_change, stride: 8, offset: 0 } - - { name: __hooks_pre_freq_change, stride: 8, offset: 0 } - - { name: __hooks_pwrbtn_change, stride: 8, offset: 0 } - - { name: __hooks_second, stride: 8, offset: 0 } - - { name: __hooks_sysjump, stride: 8, offset: 0 } - - { name: __hooks_tablet_mode_change, stride: 8, offset: 0 } - - { name: __hooks_tick, stride: 8, offset: 0 } - - { name: __hooks_usb_pd_disconnect, stride: 8, offset: 0 } - # NULL function pointers - i2c_command_passthru[common/i2c_master.c:678]: - - None - pd_svdm[common/usb_pd_policy.c:720]: - - None - usb_mux_init[driver/usb_mux.c:75]: - - None -remove: -# Remove panic callsites. Once panicking, we no longer care about stack usage -- panic_assert_fail -# Remove reset_device_and_notify for all non-PD analysis since it can only be called from PD task IDs. Comment this out for the PD tasks -- reset_device_and_notify -# Remove the LPM path because the PD_FLAGS_LPM_TRANSITION flag presents this loop -- [ reset_device_and_notify, tcpci_tcpm_init, [ tcpc_read, tcpc_write16 ], pd_wait_for_wakeup ] -# Remove nonesense hook paths that come from the general hook_notify above (Note: these are not a comprehensive list, but a list of -# paths that came up as longest during analysis -# These functions do not call HOOK_INIT -- [ [ s0ix_transition, charger_task, power_button_change_deferred, jump_to_image, tablet_set_mode, pd_set_suspend, set_state, extpower_deferred, lid_switch_open, lid_switch_close, espi_chipset_reset, lpc_chipset_reset ], hook_notify, [ usb_charger_init, baseboard_tcpc_init, motion_sense_startup, gmr_tablet_switch_init, powerbtn_x86_init, cbi_init ] ] -# These functions do not call HOOK_CHIPSET_SHUTDOWN -- [ [ s0ix_transition, charger_task, power_button_change_deferred, jump_to_image, tablet_set_mode, pd_set_suspend, set_state, extpower_deferred, lid_switch_open, lid_switch_close, hook_task, espi_chipset_reset, lpc_chipset_reset ], hook_notify, [ system_common_shutdown, motion_sense_shutdown, board_disable_a1_redriver ] ] -# These functions do not call HOOK_LID_CHANGE -- [ [ s0ix_transition, charger_task, power_button_change_deferred, jump_to_image, tablet_set_mode, pd_set_suspend, set_state, extpower_deferred, hook_task, espi_chipset_reset, lpc_chipset_reset ], hook_notify, powerbtn_x86_lid_change ] -# These functions do not call HOOK_BATTERY_SOC_CHANGE -- [ [ s0ix_transition, power_button_change_deferred, jump_to_image, tablet_set_mode, pd_set_suspend, set_state, extpower_deferred, lid_switch_open, lid_switch_close, hook_task, espi_chipset_reset, lpc_chipset_reset ], hook_notify, power_up_inhibited_cb ] -# These functions do not call HOOK_CHIPSET_STARTUP -- [ [ charger_task, power_button_change_deferred, jump_to_image, tablet_set_mode, pd_set_suspend, set_state, extpower_deferred, lid_switch_open, lid_switch_close, hook_task, espi_chipset_reset, lpc_chipset_reset ], hook_notify, board_enable_a1_redriver ] diff --git a/board/fleex/battery.c b/board/fleex/battery.c deleted file mode 100644 index 57a5246052..0000000000 --- a/board/fleex/battery.c +++ /dev/null @@ -1,320 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery pack vendor provided charging profile - */ - -#include "battery_fuel_gauge.h" -#include "common.h" -#include "util.h" - -/* - * Battery info for all fleex battery types. Note that the fields - * start_charging_min/max and charging_min/max are not used for the charger. - * The effective temperature limits are given by discharging_min/max_c. - * - * Fuel Gauge (FG) parameters which are used for determining if the battery - * is connected, the appropriate ship mode (battery cutoff) command, and the - * charge/discharge FETs status. - * - * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery - * register. For some batteries, the charge/discharge FET bits are set when - * charging/discharging is active, in other types, these bits set mean that - * charging/discharging is disabled. Therefore, in addition to the mask for - * these bits, a disconnect value must be specified. Note that for TI fuel - * gauge, the charge/discharge FET status is found in Operation Status (0x54), - * but a read of Manufacturer Access (0x00) will return the lower 16 bits of - * Operation status which contains the FET status bits. - * - * The assumption for battery types supported is that the charge/discharge FET - * status can be read with a sb_read() command and therefore, only the register - * address, mask, and disconnect value need to be provided. - */ -const struct board_batt_params board_battery_info[] = { - /* BYD Battery Information */ - [BATTERY_BYD] = { - .fuel_gauge = { - .manuf_name = "BYD", - .ship_mode = { - .reg_addr = 0x00, - .reg_data = { 0x0010, 0x0010 }, - }, - .fet = { - .reg_addr = 0x0, - .reg_mask = 0x2000, - .disconnect_val = 0x2000, - } - }, - .batt_info = { - .voltage_max = 13200, /* mV */ - .voltage_normal = 11400, /* mV */ - .voltage_min = 9000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 50, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = -20, - .discharging_max_c = 70, - }, - }, - - /* BYD 16DPHYMD Battery Information */ - [BATTERY_BYD16] = { - .fuel_gauge = { - .manuf_name = "BYD-BYD3.685", - .ship_mode = { - .reg_addr = 0x00, - .reg_data = { 0x0010, 0x0010 }, - }, - .fet = { - .reg_addr = 0x043, - .reg_mask = 0x0001, - .disconnect_val = 0x000, - } - }, - .batt_info = { - .voltage_max = 13200, /* mV */ - .voltage_normal = 11400, /* mV */ - .voltage_min = 9000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 50, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = 0, - .discharging_max_c = 70, - }, - }, - - /* LGC Battery Information */ - [BATTERY_LGC] = { - .fuel_gauge = { - .manuf_name = "LGC-LGC3.553", - .ship_mode = { - .reg_addr = 0x00, - .reg_data = { 0x0010, 0x0010 }, - }, - .fet = { - .reg_addr = 0x0, - .reg_mask = 0x2000, - .disconnect_val = 0x2000, - } - }, - .batt_info = { - .voltage_max = 13200, /* mV */ - .voltage_normal = 11400, /* mV */ - .voltage_min = 9000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 50, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = -20, - .discharging_max_c = 70, - }, - }, - - /* LGC JPFMRYMD Battery Information */ - [BATTERY_LGC3] = { - .fuel_gauge = { - .manuf_name = "LGC-LGC3.685", - .ship_mode = { - .wb_support = 1, - .reg_addr = 0x44, - .reg_data = { 0x0010, 0x0010 }, - }, - .fet = { - .reg_addr = 0x0, - .reg_mask = 0x2000, - .disconnect_val = 0x2000, - } - }, - .batt_info = { - .voltage_max = 13200, /* mV */ - .voltage_normal = 11400, /* mV */ - .voltage_min = 9000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 50, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = 0, - .discharging_max_c = 70, - }, - }, - - /* SIMPLO Battery Information */ - [BATTERY_SIMPLO] = { - .fuel_gauge = { - .manuf_name = "SMP-SDI3.72", - .ship_mode = { - .reg_addr = 0x0, - .reg_data = { 0x0010, 0x0010 }, - }, - .fet = { - .reg_addr = 0x043, - .reg_mask = 0x0001, - .disconnect_val = 0x000, - } - }, - .batt_info = { - .voltage_max = 13200, /* mV */ - .voltage_normal = 11400, /* mV */ - .voltage_min = 9000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 50, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = -20, - .discharging_max_c = 70, - }, - }, - - /* SIMPLO-ATL 7T0D3YMD Battery Information */ - [BATTERY_SIMPLO_ATL] = { - .fuel_gauge = { - .manuf_name = "SMP-ATL3.61", - .ship_mode = { - .reg_addr = 0x0, - .reg_data = { 0x0010, 0x0010 }, - }, - .fet = { - .reg_addr = 0x043, - .reg_mask = 0x0001, - .disconnect_val = 0x000, - } - }, - .batt_info = { - .voltage_max = 13200, /* mV */ - .voltage_normal = 11400, /* mV */ - .voltage_min = 9000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 50, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = 0, - .discharging_max_c = 70, - }, - }, - - /* SIMPLO-LISHEN 7T0D3YMD Battery Information */ - [BATTERY_SIMPLO_LS] = { - .fuel_gauge = { - .manuf_name = "SMP-LS3.66", - .ship_mode = { - .reg_addr = 0x0, - .reg_data = { 0x0010, 0x0010 }, - }, - .fet = { - .reg_addr = 0x043, - .reg_mask = 0x0001, - .disconnect_val = 0x000, - } - }, - .batt_info = { - .voltage_max = 13200, /* mV */ - .voltage_normal = 11400, /* mV */ - .voltage_min = 9000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 50, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = 0, - .discharging_max_c = 70, - }, - }, - - /* SIMPLO-COSMX 7T0D3YMD Battery Information */ - [BATTERY_SIMPLO_COS] = { - .fuel_gauge = { - .manuf_name = "SMP-COS3.63", - .ship_mode = { - .reg_addr = 0x0, - .reg_data = { 0x0010, 0x0010 }, - }, - .fet = { - .reg_addr = 0x043, - .reg_mask = 0x0001, - .disconnect_val = 0x000, - } - }, - .batt_info = { - .voltage_max = 13200, /* mV */ - .voltage_normal = 11400, /* mV */ - .voltage_min = 9000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 50, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = 0, - .discharging_max_c = 70, - }, - }, - - /* SWD-ATL 65N6HYMD Battery Information */ - [BATTERY_SWD_ATL] = { - .fuel_gauge = { - .manuf_name = "SWD-ATL3.618", - .ship_mode = { - .wb_support = 1, - .reg_addr = 0x44, - .reg_data = { 0x0010, 0x0010 }, - }, - .fet = { - .reg_addr = 0x0, - .reg_mask = 0x2000, - .disconnect_val = 0x2000, - } - }, - .batt_info = { - .voltage_max = 13200, /* mV */ - .voltage_normal = 11400, /* mV */ - .voltage_min = 9000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 50, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = 0, - .discharging_max_c = 70, - }, - }, - - /* SWD-COSLIGHT 65N6HYMD Battery Information */ - [BATTERY_SWD_COS] = { - .fuel_gauge = { - .manuf_name = "SWD-COS3.634", - .ship_mode = { - .wb_support = 1, - .reg_addr = 0x44, - .reg_data = { 0x0010, 0x0010 }, - }, - .fet = { - .reg_addr = 0x0, - .reg_mask = 0x2000, - .disconnect_val = 0x2000, - } - }, - .batt_info = { - .voltage_max = 13200, /* mV */ - .voltage_normal = 11400, /* mV */ - .voltage_min = 9000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 50, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = 0, - .discharging_max_c = 70, - }, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT); - -const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_LGC; diff --git a/board/fleex/board.c b/board/fleex/board.c deleted file mode 100644 index 7e11d671c6..0000000000 --- a/board/fleex/board.c +++ /dev/null @@ -1,333 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Fleex board-specific configuration */ - -#include "adc.h" -#include "battery.h" -#include "button.h" -#include "charge_manager.h" -#include "charge_state.h" -#include "common.h" -#include "console.h" -#include "cros_board_info.h" -#include "driver/accel_lis2dh.h" -#include "driver/accelgyro_lsm6dsm.h" -#include "driver/charger/isl923x.h" -#include "driver/ppc/nx20p348x.h" -#include "driver/ppc/syv682x.h" -#include "driver/tcpm/anx7447.h" -#include "driver/tcpm/ps8xxx.h" -#include "driver/tcpm/tcpci.h" -#include "driver/tcpm/tcpm.h" -#include "extpower.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "keyboard_scan.h" -#include "lid_switch.h" -#include "motion_sense.h" -#include "power.h" -#include "power_button.h" -#include "switch.h" -#include "system.h" -#include "task.h" -#include "tablet_mode.h" -#include "tcpm/tcpci.h" -#include "temp_sensor.h" -#include "temp_sensor/thermistor.h" -#include "usb_mux.h" -#include "usbc_ppc.h" -#include "util.h" - -#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -#define USB_PD_PORT_ANX7447 0 -#define USB_PD_PORT_PS8751 1 - -static uint8_t sku_id; -static int is_support_syv_ppc; - -const struct ppc_config_t ppc_syv682x_port0 = { - .i2c_port = I2C_PORT_TCPC0, - .i2c_addr_flags = SYV682X_ADDR0_FLAGS, - .drv = &syv682x_drv, -}; - -const struct ppc_config_t ppc_syv682x_port1 = { - .i2c_port = I2C_PORT_TCPC1, - .i2c_addr_flags = SYV682X_ADDR0_FLAGS, - .drv = &syv682x_drv, -}; - -/* Check PPC_ID pin status to decide which one ppc is used. */ -static int board_is_syv_ppc(void) -{ - return gpio_get_level(GPIO_PPC_ID); -} - -static void board_update_ppc_config_from_board(void) -{ - if (!is_support_syv_ppc) - return; - - memcpy(&ppc_chips[USB_PD_PORT_TCPC_0], - &ppc_syv682x_port0, - sizeof(struct ppc_config_t)); - memcpy(&ppc_chips[USB_PD_PORT_TCPC_1], - &ppc_syv682x_port1, - sizeof(struct ppc_config_t)); - - gpio_set_flags(GPIO_USB_PD_C0_INT_ODL, GPIO_INT_BOTH); - gpio_set_flags(GPIO_USB_PD_C1_INT_ODL, GPIO_INT_BOTH); -} - -static void ppc_interrupt(enum gpio_signal signal) -{ - switch (signal) { - case GPIO_USB_PD_C0_INT_ODL: - if (is_support_syv_ppc) - syv682x_interrupt(0); - else - nx20p348x_interrupt(0); - break; - - case GPIO_USB_PD_C1_INT_ODL: - if (is_support_syv_ppc) - syv682x_interrupt(1); - else - nx20p348x_interrupt(1); - break; - - default: - break; - } -} - -/* Must come after other header files and GPIO interrupts*/ -#include "gpio_list.h" - -/* ADC channels */ -const struct adc_t adc_channels[] = { - [ADC_TEMP_SENSOR_AMB] = { - "TEMP_AMB", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_TEMP_SENSOR_CHARGER] = { - "TEMP_CHARGER", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_VBUS_C0] = {"VBUS_C0", NPCX_ADC_CH9, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0}, - [ADC_VBUS_C1] = {"VBUS_C1", NPCX_ADC_CH4, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0}, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -const struct temp_sensor_t temp_sensors[] = { - [TEMP_SENSOR_BATTERY] = {.name = "Battery", - .type = TEMP_SENSOR_TYPE_BATTERY, - .read = charge_get_battery_temp, - .idx = 0}, - [TEMP_SENSOR_AMBIENT] = {.name = "Ambient", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_51k1_47k_4050b, - .idx = ADC_TEMP_SENSOR_AMB}, - [TEMP_SENSOR_CHARGER] = {.name = "Charger", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_13k7_47k_4050b, - .idx = ADC_TEMP_SENSOR_CHARGER}, -}; -BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); - -/* Motion sensors */ -/* Mutexes */ -static struct mutex g_lid_mutex; -static struct mutex g_base_mutex; - -/* Matrix to rotate accelerometer into standard reference frame */ -const mat33_fp_t lid_standard_ref = { - { 0, FLOAT_TO_FP(1), 0}, - { FLOAT_TO_FP(-1), 0, 0}, - { 0, 0, FLOAT_TO_FP(1)} -}; - - const mat33_fp_t base_standard_ref = { - { FLOAT_TO_FP(-1), 0, 0}, - { 0, FLOAT_TO_FP(-1), 0}, - { 0, 0, FLOAT_TO_FP(1)} - }; - -/* sensor private data */ -static struct stprivate_data g_lis2dh_data; -static struct lsm6dsm_data lsm6dsm_data = LSM6DSM_DATA; - -/* Drivers */ -struct motion_sensor_t motion_sensors[] = { - [LID_ACCEL] = { - .name = "Lid Accel", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_LIS2DE, - .type = MOTIONSENSE_TYPE_ACCEL, - .location = MOTIONSENSE_LOC_LID, - .drv = &lis2dh_drv, - .mutex = &g_lid_mutex, - .drv_data = &g_lis2dh_data, - .port = I2C_PORT_SENSOR, - .i2c_spi_addr_flags = LIS2DH_ADDR1_FLAGS, - .rot_standard_ref = &lid_standard_ref, - .default_range = 2, /* g */ - /* We only use 2g because its resolution is only 8-bits */ - .min_frequency = LIS2DH_ODR_MIN_VAL, - .max_frequency = LIS2DH_ODR_MAX_VAL, - .config = { - /* EC use accel for angle detection */ - [SENSOR_CONFIG_EC_S0] = { - .odr = 10000 | ROUND_UP_FLAG, - }, - /* Sensor on for lid angle detection */ - [SENSOR_CONFIG_EC_S3] = { - .odr = 10000 | ROUND_UP_FLAG, - }, - }, - }, - - [BASE_ACCEL] = { - .name = "Base Accel", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_LSM6DSM, - .type = MOTIONSENSE_TYPE_ACCEL, - .location = MOTIONSENSE_LOC_BASE, - .drv = &lsm6dsm_drv, - .mutex = &g_base_mutex, - .drv_data = LSM6DSM_ST_DATA(lsm6dsm_data, - MOTIONSENSE_TYPE_ACCEL), - .int_signal = GPIO_BASE_SIXAXIS_INT_L, - .flags = MOTIONSENSE_FLAG_INT_SIGNAL, - .port = I2C_PORT_SENSOR, - .i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS, - .rot_standard_ref = &base_standard_ref, - .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs */ - .min_frequency = LSM6DSM_ODR_MIN_VAL, - .max_frequency = LSM6DSM_ODR_MAX_VAL, - .config = { - /* EC use accel for angle detection */ - [SENSOR_CONFIG_EC_S0] = { - .odr = 13000 | ROUND_UP_FLAG, - .ec_rate = 100 * MSEC, - }, - /* Sensor on for angle detection */ - [SENSOR_CONFIG_EC_S3] = { - .odr = 10000 | ROUND_UP_FLAG, - .ec_rate = 100 * MSEC, - }, - }, - }, - - [BASE_GYRO] = { - .name = "Base Gyro", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_LSM6DSM, - .type = MOTIONSENSE_TYPE_GYRO, - .location = MOTIONSENSE_LOC_BASE, - .drv = &lsm6dsm_drv, - .mutex = &g_base_mutex, - .drv_data = LSM6DSM_ST_DATA(lsm6dsm_data, - MOTIONSENSE_TYPE_GYRO), - .int_signal = GPIO_BASE_SIXAXIS_INT_L, - .flags = MOTIONSENSE_FLAG_INT_SIGNAL, - .port = I2C_PORT_SENSOR, - .i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS, - .default_range = 1000 | ROUND_UP_FLAG, /* dps */ - .rot_standard_ref = &base_standard_ref, - .min_frequency = LSM6DSM_ODR_MIN_VAL, - .max_frequency = LSM6DSM_ODR_MAX_VAL, - }, -}; - -unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors); - -static int board_is_convertible(void) -{ - return sku_id == 0x21 || sku_id == 0x22 || sku_id == 0x23 - || sku_id == 0xff; -} - -static void board_update_sensor_config_from_sku(void) -{ - if (board_is_convertible()) { - motion_sensor_count = ARRAY_SIZE(motion_sensors); - /* Enable Base Accel interrupt */ - gpio_enable_interrupt(GPIO_BASE_SIXAXIS_INT_L); - } else { - motion_sensor_count = 0; - gmr_tablet_switch_disable(); - /* Base accel is not stuffed, don't allow line to float */ - gpio_set_flags(GPIO_BASE_SIXAXIS_INT_L, - GPIO_INPUT | GPIO_PULL_DOWN); - } -} - -static void cbi_init(void) -{ - uint32_t val; - - if (cbi_get_sku_id(&val) == EC_SUCCESS) - sku_id = val; - ccprints("SKU: 0x%04x", sku_id); - - board_update_sensor_config_from_sku(); -} -DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_INIT_I2C + 1); - -/* This callback disables keyboard when convertibles are fully open */ -__override void lid_angle_peripheral_enable(int enable) -{ - /* - * If the lid is in tablet position via other sensors, - * ignore the lid angle, which might be faulty then - * disable keyboard. - */ - if (tablet_get_mode()) - enable = 0; - if (board_is_convertible()) - keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE); -} - -void board_overcurrent_event(int port, int is_overcurrented) -{ - /* Check that port number is valid. */ - if ((port < 0) || (port >= CONFIG_USB_PD_PORT_MAX_COUNT)) - return; - - /* Note that the level is inverted because the pin is active low. */ - gpio_set_level(GPIO_USB_C_OC, !is_overcurrented); -} - -static void charger_set_buck_boost_mode(void) -{ - int reg; - /* Reduce Buck-boost mode switching frequency to improve power efficiency. */ - if (i2c_read16(I2C_PORT_CHARGER, I2C_ADDR_CHARGER_FLAGS, - ISL9238_REG_CONTROL3, ®) == EC_SUCCESS) { - reg |= ISL9238_C3_BB_SWITCHING_PERIOD; - if (i2c_write16(I2C_PORT_CHARGER, I2C_ADDR_CHARGER_FLAGS, - ISL9238_REG_CONTROL3, reg)) - ccprints("Failed to set isl9238"); - } -} - -static void board_init(void) -{ - charger_set_buck_boost_mode(); - - is_support_syv_ppc = board_is_syv_ppc(); - - board_update_ppc_config_from_board(); -} -DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); - -int ppc_get_alert_status(int port) -{ - if (port == 0) - return gpio_get_level(GPIO_USB_PD_C0_INT_ODL) == 0; - - return gpio_get_level(GPIO_USB_PD_C1_INT_ODL) == 0; -} diff --git a/board/fleex/board.h b/board/fleex/board.h deleted file mode 100644 index cd04f31687..0000000000 --- a/board/fleex/board.h +++ /dev/null @@ -1,125 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Fleex board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* Select Baseboard features */ -#define VARIANT_OCTOPUS_EC_NPCX796FB -#define VARIANT_OCTOPUS_CHARGER_ISL9238 -#include "baseboard.h" - -/* EC console commands */ -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO - -#define CONFIG_LED_COMMON -#define CONFIG_LED_ONOFF_STATES_BAT_LOW 10 - -/* - * Some fuel gagues will return 1% immediately, without the battery being - * charged to the point of being able to withstand Vbus loss, so re-set - * allowable Try.SRC level and reset level to 2% - */ -#undef CONFIG_USB_PD_TRY_SRC_MIN_BATT_SOC -#define CONFIG_USB_PD_TRY_SRC_MIN_BATT_SOC 2 - -#define CONFIG_USB_PD_RESET_MIN_BATT_SOC 2 - -/* Sensors */ -#define CONFIG_ACCEL_LIS2DE /* Lid accel */ -#define CONFIG_ACCELGYRO_LSM6DSM /* Base accel */ -/* Sensors without hardware FIFO are in forced mode */ -#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) -#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT - -/* Volume button */ -#define CONFIG_VOLUME_BUTTONS -#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL -#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL - -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_UPDATE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL - -#define CONFIG_TEMP_SENSOR -#define CONFIG_THERMISTOR -#define CONFIG_STEINHART_HART_3V3_13K7_47K_4050B -#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B - -/* TI gauge IC 500ms WDT timeout setting under battery sleep mode - * induced battery cut-off, under the following conditions: - * 1. SMBus communication on FC is once per minute which allows - * battery entering sleep mode; - * 2. System load < 10mA and accumulate 5 hours will trigger battery - * simulation and result in a 500ms WDT timeout. So change charge - * max sleep time from once/minute to once/10 seconds to prevent - * battery entering sleep mode. See b/133375756. - */ -#define CHARGE_MAX_SLEEP_USEC (10 * SECOND) - -#define CONFIG_ACCEL_LSM6DSM_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) - -/* Additional PPC second source */ -#define CONFIG_USBC_PPC_SYV682X -#define CONFIG_USBC_PPC_DEDICATED_INT -/* SYV682 isn't connected to CC, so TCPC must provide VCONN */ -#define CONFIG_USBC_PPC_SYV682X_NO_CC - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -enum adc_channel { - ADC_TEMP_SENSOR_AMB, /* ADC0 */ - ADC_TEMP_SENSOR_CHARGER, /* ADC1 */ - ADC_VBUS_C0, /* ADC9 */ - ADC_VBUS_C1, /* ADC4 */ - ADC_CH_COUNT -}; - -enum temp_sensor_id { - TEMP_SENSOR_BATTERY, - TEMP_SENSOR_AMBIENT, - TEMP_SENSOR_CHARGER, - TEMP_SENSOR_COUNT -}; - -enum pwm_channel { - PWM_CH_KBLIGHT, - PWM_CH_COUNT -}; - -/* Motion sensors */ -enum sensor_id { - LID_ACCEL, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT -}; - -/* List of possible batteries */ -enum battery_type { - BATTERY_BYD, - BATTERY_BYD16, - BATTERY_LGC, - BATTERY_LGC3, - BATTERY_SIMPLO, - BATTERY_SIMPLO_ATL, - BATTERY_SIMPLO_COS, - BATTERY_SIMPLO_LS, - BATTERY_SWD_ATL, - BATTERY_SWD_COS, - BATTERY_TYPE_COUNT, -}; - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ diff --git a/board/fleex/build.mk b/board/fleex/build.mk deleted file mode 100644 index 7e806f4667..0000000000 --- a/board/fleex/build.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -*- makefile -*- -# Copyright 2018 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Board specific files build -# - -CHIP:=npcx -CHIP_FAMILY:=npcx7 -CHIP_VARIANT:=npcx7m6fb -BASEBOARD:=octopus - -board-y=board.o led.o -board-$(CONFIG_BATTERY_SMART)+=battery.o -board-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o diff --git a/board/fleex/ec.tasklist b/board/fleex/ec.tasklist deleted file mode 100644 index d98db145e7..0000000000 --- a/board/fleex/ec.tasklist +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* - * See CONFIG_TASK_LIST in config.h for details. - */ - -#define CONFIG_TASK_LIST \ - TASK_ALWAYS(HOOKS, hook_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, LARGER_TASK_STACK_SIZE) \ - TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 1, LARGER_TASK_STACK_SIZE) \ - TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_NOTEST(CHIPSET, chipset_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \ - TASK_ALWAYS(HOSTCMD, host_command_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(POWERBTN, power_button_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, VENTI_TASK_STACK_SIZE) diff --git a/board/fleex/gpio.inc b/board/fleex/gpio.inc deleted file mode 100644 index efedd6989b..0000000000 --- a/board/fleex/gpio.inc +++ /dev/null @@ -1,193 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. */ - -/* Wake Source interrupts */ -GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH | - GPIO_HIB_WAKE_HIGH, lid_interrupt) -GPIO_INT(POWER_BUTTON_L, PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt) /* MECH_PWR_BTN_ODL */ -GPIO_INT(AC_PRESENT, PIN(0, 0), GPIO_INT_BOTH | - GPIO_HIB_WAKE_HIGH, extpower_interrupt) /* ACOK_OD */ - -/* Volume button interrupts */ -GPIO_INT(EC_VOLUP_BTN_ODL, PIN(7, 5), GPIO_INT_BOTH, button_interrupt) -GPIO_INT(EC_VOLDN_BTN_ODL, PIN(4, 0), GPIO_INT_BOTH, button_interrupt) - -/* USB-C interrupts */ -GPIO_INT(USB_C0_MUX_INT_ODL, PIN(6, 1), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C1_MUX_INT_ODL, PIN(F, 5), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_PD_C0_INT_ODL, PIN(E, 0), GPIO_INT_FALLING, ppc_interrupt) -GPIO_INT(USB_PD_C1_INT_ODL, PIN(F, 1), GPIO_INT_FALLING, ppc_interrupt) - -/* Power State interrupts */ -#ifdef CONFIG_POWER_S0IX -GPIO_INT(PCH_SLP_S0_L, PIN(A, 4), GPIO_INT_BOTH, power_signal_interrupt) /* SLP_S0_L */ -#endif -GPIO_INT(PCH_SLP_S4_L, PIN(A, 3), GPIO_INT_BOTH, power_signal_interrupt) /* SLP_S4_L */ -GPIO_INT(PCH_SLP_S3_L, PIN(A, 6), GPIO_INT_BOTH, power_signal_interrupt) /* SLP_S3_L */ -GPIO_INT(SUSPWRDNACK, PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt) /* SUSPWRDNACK */ -GPIO_INT(RSMRST_L_PGOOD, PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt) /* PMIC_EC_RSMRST_ODL */ -GPIO_INT(ALL_SYS_PGOOD, PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt) /* PMIC_EC_PWROK_OD */ - -/* Other interrupts */ -GPIO_INT(WP_L, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt) /* EC_WP_ODL */ -GPIO_INT(TABLET_MODE_L, PIN(8, 6), GPIO_INT_BOTH, gmr_tablet_switch_isr) - -GPIO_INT(BASE_SIXAXIS_INT_L, PIN(5, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, lsm6dsm_interrupt) -GPIO(LID_ACCEL_INT_L, PIN(5, 0), GPIO_INPUT | GPIO_SEL_1P8V) - -/* Define PCH_SLP_S0_L after all interrupts if CONFIG_POWER_S0IX not defined. */ -#ifndef CONFIG_POWER_S0IX -GPIO(PCH_SLP_S0_L, PIN(A, 4), GPIO_INPUT) /* SLP_S0_L */ -#endif - -/* - * PLT_RST_L isn't used since there is a Virtual Wire on eSPI for it. It is here - * only for debugging purposes. - */ -GPIO(PLT_RST_L, PIN(C, 7), GPIO_INPUT) /* Platform Reset from SoC */ -GPIO(SYS_RESET_L, PIN(3, 4), GPIO_ODR_HIGH) /* SYS_RST_ODL */ -GPIO(PCH_RTCRST, PIN(7, 6), GPIO_OUT_LOW) /* EC_PCH_RTCRST */ - -GPIO(ENTERING_RW, PIN(E, 1), GPIO_OUT_LOW) /* EC_ENTERING_RW */ -GPIO(PCH_WAKE_L, PIN(7, 4), GPIO_ODR_HIGH) /* EC_PCH_WAKE_ODL */ -GPIO(PCH_PWRBTN_L, PIN(C, 1), GPIO_ODR_HIGH) /* EC_PCH_PWR_BTN_ODL */ - -GPIO(EN_PP5000, PIN(7, 3), GPIO_OUT_LOW) /* EN_PP5000_A */ -GPIO(PP5000_PG, PIN(C, 0), GPIO_INPUT) /* PP5000_PG_OD */ -GPIO(EN_PP3300, PIN(D, 4), GPIO_OUT_LOW) /* EN_PP3300_A */ -GPIO(PP3300_PG, PIN(6, 0), GPIO_INPUT) /* PP3300_PG_OD */ -GPIO(PMIC_EN, PIN(7, 2), GPIO_OUT_LOW) /* Enable A Rails via PMIC */ -GPIO(PCH_RSMRST_L, PIN(C, 2), GPIO_OUT_LOW) /* RSMRST# to SOC. All _A rails now up. */ -GPIO(PCH_SYS_PWROK, PIN(B, 7), GPIO_OUT_LOW) /* EC_PCH_PWROK. All S0 rails now up. */ - -/* Peripheral rails */ -GPIO(ENABLE_BACKLIGHT, PIN(D, 3), GPIO_ODR_HIGH | - GPIO_SEL_1P8V) /* EC_BL_EN_OD */ -GPIO(EN_P3300_TRACKPAD_ODL, PIN(3, 3), GPIO_ODR_HIGH) - -GPIO(EC_BATT_PRES_L, PIN(E, 5), GPIO_INPUT) - -/* - * EC_RST_ODL acts as a wake source from PSL hibernate mode. However, it does - * not need to be an interrupt for normal EC operations. Thus, configure it as - * GPIO_INPUT with wake on low-to-high edge using GPIO_HIB_WAKE_HIGH so that PSL - * common code can configure PSL_IN correctly. - * - * Reason for choosing low-to-high edge for waking from hibernate is to avoid - * the double reset - one because of PSL_IN wake and other because of VCC1_RST - * being asserted. Also, it should be fine to have the EC in hibernate when H1 - * or servo wants to hold the EC in reset since VCC1 will be down and so entire - * EC logic (except PSL) as well as AP will be in reset. - * - * We need to lock the setting so this gpio can't be reconfigured to overdrive - * the real reset signal. (This is the PSL input pin not the real reset pin). - */ -GPIO(EC_RST_ODL, PIN(0, 2), GPIO_INT_BOTH | - GPIO_HIB_WAKE_HIGH | - GPIO_LOCKED) - -/* - * PCH_PROCHOT_ODL is primarily for monitoring the PROCHOT# signal which is - * normally driven by the PMIC. The EC can also drive this signal in the event - * that the ambient or charger temperature sensors exceeds their thresholds. - */ -GPIO(CPU_PROCHOT, PIN(3, 7), GPIO_INPUT | GPIO_SEL_1P8V) /* PCH_PROCHOT_ODL */ - -/* I2C pins - Alternate function below configures I2C module on these pins */ -GPIO(I2C0_SCL, PIN(B, 5), GPIO_INPUT) /* EC_I2C_BATTERY_3V3_SCL */ -GPIO(I2C0_SDA, PIN(B, 4), GPIO_INPUT) /* EC_I2C_BATTERY_3V3_SDA */ -GPIO(I2C1_SCL, PIN(9, 0), GPIO_INPUT) /* EC_I2C_USB_C0_MUX_SCL */ -GPIO(I2C1_SDA, PIN(8, 7), GPIO_INPUT) /* EC_I2C_USB_C0_MUX_SDA */ -GPIO(I2C2_SCL, PIN(9, 2), GPIO_INPUT) /* EC_I2C_USB_C1_MUX_SCL */ -GPIO(I2C2_SDA, PIN(9, 1), GPIO_INPUT) /* EC_I2C_USB_C1_MUX_SDA */ -GPIO(I2C3_SCL, PIN(D, 1), GPIO_INPUT) /* EC_I2C_EEPROM_SCL */ -GPIO(I2C3_SDA, PIN(D, 0), GPIO_INPUT) /* EC_I2C_EEPROM_SDA */ -GPIO(I2C4_SCL, PIN(F, 3), GPIO_INPUT) /* EC_I2C_CHARGER_3V3_SCL */ -GPIO(I2C4_SDA, PIN(F, 2), GPIO_INPUT) /* EC_I2C_CHARGER_3V3_SDA */ -GPIO(I2C7_SCL, PIN(B, 3), GPIO_INPUT | - GPIO_SEL_1P8V) /* EC_I2C_SENSOR_U_SCL */ -GPIO(I2C7_SDA, PIN(B, 2), GPIO_INPUT | - GPIO_SEL_1P8V) /* EC_I2C_SENSOR_U_SDA */ - -/* USB pins */ -GPIO(EN_USB_A0_5V, PIN(6, 7), GPIO_OUT_LOW) /* Enable A0 5V Charging */ -GPIO(EN_USB_A1_5V, PIN(9, 6), GPIO_OUT_LOW) /* Enable A1 5V Charging */ -GPIO(USB_A0_CHARGE_EN_L, PIN(A, 2), GPIO_OUT_HIGH) /* Enable A0 1.5A Charging */ -GPIO(USB_A1_CHARGE_EN_L, PIN(A, 0), GPIO_OUT_HIGH) /* Enable A1 1.5A Charging */ -GPIO(USB_C0_PD_RST, PIN(8, 3), GPIO_OUT_LOW) /* C0 PD Reset */ -GPIO(USB_C0_BC12_VBUS_ON, PIN(6, 3), GPIO_OUT_LOW) /* C0 BC1.2 Power */ -GPIO(USB_C0_BC12_CHG_DET_L, PIN(9, 5), GPIO_INPUT) /* C0 BC1.2 Detect */ -GPIO(USB_C0_HPD_1V8_ODL, PIN(C, 5), GPIO_INPUT | /* C0 DP Hotplug Detect */ - GPIO_SEL_1P8V) -GPIO(USB_C1_PD_RST_ODL, PIN(7, 0), GPIO_ODR_HIGH) /* C1 PD Reset */ -GPIO(USB_C1_BC12_VBUS_ON, PIN(B, 1), GPIO_OUT_LOW) /* C1 BC1.2 Power */ -GPIO(USB_C1_BC12_CHG_DET_L, PIN(E, 4), GPIO_INPUT) /* C1 BC1.2 Detect */ -GPIO(USB_C1_HPD_1V8_ODL, PIN(C, 6), GPIO_INPUT | /* C1 DP Hotplug Detect */ - GPIO_SEL_1P8V) - -/* LED */ -GPIO(LED_1_PWR_WHITE_L, PIN(C, 3), GPIO_OUT_HIGH) -GPIO(LED_2_CHG_AMBER_L, PIN(C, 4), GPIO_OUT_HIGH) - -/* Not implemented in hardware */ -UNIMPLEMENTED(KB_BL_PWR_EN) - -/* Overcurrent event to host */ -GPIO(USB_C_OC, PIN(3, 6), GPIO_ODR_HIGH | GPIO_SEL_1P8V) - -/* Misc. */ -GPIO(CCD_MODE_EC_L, PIN(E, 3), GPIO_INPUT) -GPIO(TRACKPAD_INT_1V8_ODL, PIN(9, 3), GPIO_INPUT | GPIO_SEL_1P8V) - -/* Camera */ -GPIO(EC_GPIO03, PIN(0, 3), GPIO_INPUT) /* TP only */ - -/* MKBP event synchronization */ -GPIO(EC_INT_L, PIN(9, 4), GPIO_ODR_HIGH) /* EC_AP_INT_ODL */ - -GPIO(PPC_ID, PIN(9, 7), GPIO_INPUT | GPIO_PULL_DOWN) /* PPC ID Pin */ - -/* Unused Pins */ -GPIO(CHARGER_PMON, PIN(4, 2), GPIO_INPUT) -GPIO(CHARGER_IADP, PIN(4, 3), GPIO_INPUT) -GPIO(EC_GPIO57, PIN(5, 7), GPIO_INPUT | GPIO_PULL_UP) /* TP Only */ -GPIO(EC_I2S_SFRM, PIN(A, 5), GPIO_INPUT | GPIO_SEL_1P8V) -GPIO(EC_I2S_SCLK, PIN(A, 7), GPIO_INPUT | GPIO_SEL_1P8V) -GPIO(EC_I2S_TX_PCH_RX, PIN(B, 0), GPIO_INPUT | GPIO_SEL_1P8V) -GPIO(LED_3_L, PIN(D, 7), GPIO_INPUT) - -/* Keyboard pins */ -ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) /* KSI_00-01 */ -ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) /* KSI_02-07 */ -ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_00-01 */ -ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_03-09 */ -ALTERNATE(PIN_MASK(0, 0xF0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_10-13 */ -ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_14 */ -GPIO(KBD_KSO2, PIN(1, 7), GPIO_OUT_LOW) /* KSO_02 inverted */ - -/* Alternate functions GPIO definitions */ -/* Cr50 requires no pull-ups on UART pins. */ -ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* UART from EC to Servo */ -ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, 0) /* I2C0 */ -ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0) /* I2C1 SCL / I2C2 */ -ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0) /* I2C1 SDA */ -ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0) /* I2C3 */ -ALTERNATE(PIN_MASK(F, 0x0C), 0, MODULE_I2C, 0) /* I2C4 */ -ALTERNATE(PIN_MASK(B, 0x0C), 0, MODULE_I2C, GPIO_SEL_1P8V) /* I2C7 - 1.8V */ -ALTERNATE(PIN_MASK(4, 0x30), 0, MODULE_ADC, 0) /* ADC0-1 */ -ALTERNATE(PIN_MASK(4, 0x02), 0, MODULE_ADC, 0) /* ADC4 */ -ALTERNATE(PIN_MASK(F, 0x01), 0, MODULE_ADC, 0) /* ADC9 */ -ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0) /* PWM3: KB_BL_PWM */ - -/* Power Switch Logic (PSL) inputs */ -ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, 0) /* GPIOD2 = LID_OPEN */ -ALTERNATE(PIN_MASK(0, 0x07), 0, MODULE_PMU, 0) /* GPIO00 = ACOK_OD, - GPIO01 = MECH_PWR_BTN_ODL - GPIO02 = EC_RST_ODL */ diff --git a/board/fleex/led.c b/board/fleex/led.c deleted file mode 100644 index 4d89f657cd..0000000000 --- a/board/fleex/led.c +++ /dev/null @@ -1,80 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Power and battery LED control for Fleex - */ - -#include "ec_commands.h" -#include "gpio.h" -#include "led_common.h" -#include "led_onoff_states.h" - -#define LED_OFF_LVL 1 -#define LED_ON_LVL 0 - -__override const int led_charge_lvl_1 = 10; - -__override const int led_charge_lvl_2 = 100; - -/* Fleex: Note there is only LED for charge / power */ -__override struct led_descriptor - led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = { - [STATE_CHARGING_LVL_1] = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC}, - {LED_OFF, 1 * LED_ONE_SEC} }, - [STATE_CHARGING_LVL_2] = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} }, - [STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} }, - [STATE_CHARGING_FULL_S5] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_DISCHARGE_S0] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} }, - [STATE_DISCHARGE_S0_BAT_LOW] = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC}, - {LED_OFF, 1 * LED_ONE_SEC} }, - [STATE_DISCHARGE_S3] = {{EC_LED_COLOR_WHITE, 1 * LED_ONE_SEC}, - {LED_OFF, 1 * LED_ONE_SEC} }, - [STATE_DISCHARGE_S5] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_BATTERY_ERROR] = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC}, - {LED_OFF, 1 * LED_ONE_SEC} }, - [STATE_FACTORY_TEST] = {{EC_LED_COLOR_WHITE, 2 * LED_ONE_SEC}, - {EC_LED_COLOR_AMBER, 2 * LED_ONE_SEC} }, -}; -BUILD_ASSERT(ARRAY_SIZE(led_bat_state_table) == LED_NUM_STATES); - -const enum ec_led_id supported_led_ids[] = { EC_LED_ID_BATTERY_LED }; - -const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); - -__override void led_set_color_battery(enum ec_led_colors color) -{ - switch (color) { - case EC_LED_COLOR_WHITE: - gpio_set_level(GPIO_LED_1_PWR_WHITE_L, LED_ON_LVL); - gpio_set_level(GPIO_LED_2_CHG_AMBER_L, LED_OFF_LVL); - break; - case EC_LED_COLOR_AMBER: - gpio_set_level(GPIO_LED_1_PWR_WHITE_L, LED_OFF_LVL); - gpio_set_level(GPIO_LED_2_CHG_AMBER_L, LED_ON_LVL); - break; - default: /* LED_OFF and other unsupported colors */ - gpio_set_level(GPIO_LED_1_PWR_WHITE_L, LED_OFF_LVL); - gpio_set_level(GPIO_LED_2_CHG_AMBER_L, LED_OFF_LVL); - break; - } -} - -void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) -{ - brightness_range[EC_LED_COLOR_WHITE] = 1; - brightness_range[EC_LED_COLOR_AMBER] = 1; -} - -int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness) -{ - if (brightness[EC_LED_COLOR_WHITE] != 0) - led_set_color_battery(EC_LED_COLOR_WHITE); - else if (brightness[EC_LED_COLOR_AMBER] != 0) - led_set_color_battery(EC_LED_COLOR_AMBER); - else - led_set_color_battery(LED_OFF); - - return EC_SUCCESS; -} - diff --git a/board/fleex/usb_pd_policy.c b/board/fleex/usb_pd_policy.c deleted file mode 100644 index 82922f9a4d..0000000000 --- a/board/fleex/usb_pd_policy.c +++ /dev/null @@ -1,8 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "common.h" - -/* TODO(b/78638238): Remove file if still unused after DVT */ diff --git a/board/fleex/vif_override.xml b/board/fleex/vif_override.xml deleted file mode 100644 index 32736caf64..0000000000 --- a/board/fleex/vif_override.xml +++ /dev/null @@ -1,3 +0,0 @@ -<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File - Definition from the USB-IF. ---> |