1 files changed, 0 insertions, 143 deletions
diff --git a/board/gimble/board.c b/board/gimble/board.c
deleted file mode 100644
index 6483d8ca6d..0000000000
--- a/board/gimble/board.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "battery.h"
-#include "button.h"
-#include "charge_ramp.h"
-#include "charge_state_v2.h"
-#include "charger.h"
-#include "common.h"
-#include "compile_time_macros.h"
-#include "console.h"
-#include "driver/charger/bq25710.h"
-#include "gpio.h"
-#include "gpio_signal.h"
-#include "hooks.h"
-#include "driver/accel_bma2x2_public.h"
-#include "driver/accel_bma422.h"
-#include "driver/accelgyro_bmi160.h"
-#include "driver/accelgyro_lsm6dsm.h"
-#include "fw_config.h"
-#include "hooks.h"
-#include "lid_switch.h"
-#include "power_button.h"
-#include "power.h"
-#include "registers.h"
-#include "switch.h"
-#include "tablet_mode.h"
-#include "throttle_ap.h"
-#include "usbc_config.h"
-
-#include "gpio_list.h" /* Must come after other header files. */
-
-/* Console output macros */
-#define CPRINTF(format, args...) cprintf(CC_CHARGER, format, ## args)
-#define CPRINTS(format, args...) cprints(CC_CHARGER, format, ## args)
-
-/******************************************************************************/
-/* USB-A charging control */
-
-const int usb_port_enable[USB_PORT_COUNT] = {
-	GPIO_EN_PP5000_USBA_R,
-};
-BUILD_ASSERT(ARRAY_SIZE(usb_port_enable) == USB_PORT_COUNT);
-
-/******************************************************************************/
-
-__override void board_cbi_init(void)
-{
-	config_usb_db_type();
-}
-
-/* Called on AP S3 -> S0 transition */
-static void board_chipset_resume(void)
-{
-	/* Allow keyboard backlight to be enabled */
-
-	/* TODO(b/190783131)
-	 * Need to implement specific keyboard backlight control method.
-	 */
-}
-DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT);
-
-/* Called on AP S0 -> S3 transition */
-static void board_chipset_suspend(void)
-{
-	/* Turn off the keyboard backlight if it's on. */
-
-	/* TODO(b/190783131)
-	 * Need to implement specific keyboard backlight control method.
-	 */
-}
-DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT);
-
-#ifdef CONFIG_CHARGE_RAMP_SW
-
-/*
- * TODO(b/181508008): tune this threshold
- */
-
-#define BC12_MIN_VOLTAGE 4400
-
-/**
- * Return true if VBUS is too low
- */
-int board_is_vbus_too_low(int port, enum chg_ramp_vbus_state ramp_state)
-{
-	int voltage;
-
-	if (charger_get_vbus_voltage(port, &voltage))
-		voltage = 0;
-
-	if (voltage == 0) {
-		CPRINTS("%s: must be disconnected", __func__);
-		return 1;
-	}
-
-	if (voltage < BC12_MIN_VOLTAGE) {
-		CPRINTS("%s: port %d: vbus %d lower than %d", __func__,
-			port, voltage, BC12_MIN_VOLTAGE);
-		return 1;
-	}
-
-	return 0;
-}
-
-#endif /* CONFIG_CHARGE_RAMP_SW */
-
-enum battery_present battery_hw_present(void)
-{
-	enum gpio_signal batt_pres;
-
-	batt_pres = GPIO_EC_BATT_PRES_ODL;
-
-	/* The GPIO is low when the battery is physically present */
-	return gpio_get_level(batt_pres) ? BP_NO : BP_YES;
-}
-
-static void board_init(void)
-{
-	/* The PPVAR_SYS must same as battery voltage(3 cells * 4.4V) */
-	if (extpower_is_present() && battery_hw_present()) {
-		bq25710_set_min_system_voltage(CHARGER_SOLO, 9200);
-	} else {
-		bq25710_set_min_system_voltage(CHARGER_SOLO, 13200);
-	}
-}
-DECLARE_HOOK(HOOK_SECOND, board_init, HOOK_PRIO_DEFAULT);
-
-__override void board_set_charge_limit(int port, int supplier, int charge_ma,
-			    int max_ma, int charge_mv)
-{
-	/*
-	 * Follow OEM request to limit the input current to
-	 * 90% negotiated limit.
-	 */
-	charge_ma = charge_ma * 90 / 100;
-
-	charge_set_input_current_limit(MAX(charge_ma,
-					CONFIG_CHARGER_INPUT_CURRENT),
-					charge_mv);
-}