1 files changed, 0 insertions, 291 deletions
diff --git a/board/gimble/usbc_config.c b/board/gimble/usbc_config.c
deleted file mode 100644
index 9f9f702364..0000000000
--- a/board/gimble/usbc_config.c
+++ /dev/null
@@ -1,291 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include <stdint.h>
-#include <stdbool.h>
-
-#include "common.h"
-#include "compile_time_macros.h"
-#include "console.h"
-#include "driver/bc12/pi3usb9201_public.h"
-#include "driver/ppc/nx20p348x.h"
-#include "driver/ppc/syv682x_public.h"
-#include "driver/tcpm/nct38xx.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "driver/tcpm/ps8xxx_public.h"
-#include "driver/tcpm/tcpci.h"
-#include "ec_commands.h"
-#include "fw_config.h"
-#include "gpio.h"
-#include "gpio_signal.h"
-#include "hooks.h"
-#include "ioexpander.h"
-#include "system.h"
-#include "task.h"
-#include "task_id.h"
-#include "timer.h"
-#include "usbc_config.h"
-#include "usbc_ppc.h"
-#include "usb_charge.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usb_pd_tcpm.h"
-
-#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args)
-#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args)
-
-/* USBC TCPC configuration */
-const struct tcpc_config_t tcpc_config[] = {
-	[USBC_PORT_C0] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_USB_C0_TCPC,
-			.addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS,
-		},
-		.drv = &nct38xx_tcpm_drv,
-		.flags = TCPC_FLAGS_TCPCI_REV2_0,
-	},
-	[USBC_PORT_C1] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_USB_C1_TCPC,
-			.addr_flags = PS8751_I2C_ADDR1_FLAGS,
-		},
-		.drv = &ps8xxx_tcpm_drv,
-		.flags = TCPC_FLAGS_TCPCI_REV2_0 |
-			 TCPC_FLAGS_TCPCI_REV2_0_NO_VSAFE0V,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == USBC_PORT_COUNT);
-BUILD_ASSERT(CONFIG_USB_PD_PORT_MAX_COUNT == USBC_PORT_COUNT);
-
-/* USBC PPC configuration */
-struct ppc_config_t ppc_chips[] = {
-	[USBC_PORT_C0] = {
-		.i2c_port = I2C_PORT_USB_C0_PPC,
-		.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
-		.drv = &syv682x_drv,
-	},
-	[USBC_PORT_C1] = {
-		/* Compatible with Silicon Mitus SM536A0 */
-		.i2c_port = I2C_PORT_USB_C1_PPC,
-		.i2c_addr_flags = NX20P3483_ADDR2_FLAGS,
-		.drv = &nx20p348x_drv,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(ppc_chips) == USBC_PORT_COUNT);
-
-unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips);
-
-/*
- * USB3 DB mux configuration - the top level mux still needs to be set
- * to the virtual_usb_mux_driver so the AP gets notified of mux changes
- * and updates the TCSS configuration on state changes.
- */
-static const struct usb_mux usbc1_usb3_db_retimer = {
-	.usb_port = USBC_PORT_C1,
-	.driver = &tcpci_tcpm_usb_mux_driver,
-	.hpd_update = &ps8xxx_tcpc_update_hpd_status,
-	.next_mux = NULL,
-};
-
-/* USBC mux configuration - Alder Lake includes internal mux */
-const struct usb_mux usb_muxes[] = {
-	[USBC_PORT_C0] = {
-		.usb_port = USBC_PORT_C0,
-		.driver = &virtual_usb_mux_driver,
-		.hpd_update = &virtual_hpd_update,
-	},
-	[USBC_PORT_C1] = {
-		/* PS8815 DB */
-		.usb_port = USBC_PORT_C1,
-		.driver = &virtual_usb_mux_driver,
-		.hpd_update = &virtual_hpd_update,
-		.next_mux = &usbc1_usb3_db_retimer,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT);
-
-/* BC1.2 charger detect configuration */
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	[USBC_PORT_C0] = {
-		.i2c_port = I2C_PORT_USB_C0_BC12,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-	[USBC_PORT_C1] = {
-		.i2c_port = I2C_PORT_USB_C1_BC12,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pi3usb9201_bc12_chips) == USBC_PORT_COUNT);
-
-/*
- * ioex_init() is normally called before we take the TCPCs out of
- * reset, so we need to start in disabled mode, then explicitly
- * call ioex_init().
- */
-
-struct ioexpander_config_t ioex_config[] = {
-	[IOEX_C0_NCT38XX] = {
-		.i2c_host_port = I2C_PORT_USB_C0_TCPC,
-		.i2c_addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS,
-		.drv = &nct38xx_ioexpander_drv,
-		.flags = IOEX_FLAGS_DISABLED,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(ioex_config) == CONFIG_IO_EXPANDER_PORT_COUNT);
-
-void config_usb_db_type(void)
-{
-	enum ec_cfg_usb_db_type db_type = ec_cfg_usb_db_type();
-
-	/*
-	 * TODO(b/180434685): implement multiple DB types
-	 */
-
-	CPRINTS("Configured USB DB type number is %d", db_type);
-}
-
-static void ps8815_reset(void)
-{
-	int val;
-
-	CPRINTS("%s: patching ps8815 registers", __func__);
-
-	if (i2c_read8(I2C_PORT_USB_C1_TCPC,
-		      PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == EC_SUCCESS)
-		CPRINTS("ps8815: reg 0x0f was %02x", val);
-
-	if (i2c_write8(I2C_PORT_USB_C1_TCPC,
-		       PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, 0x31) == EC_SUCCESS)
-		CPRINTS("ps8815: reg 0x0f set to 0x31");
-
-	if (i2c_read8(I2C_PORT_USB_C1_TCPC,
-		      PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == EC_SUCCESS)
-		CPRINTS("ps8815: reg 0x0f now %02x", val);
-}
-
-void board_reset_pd_mcu(void)
-{
-	/* Port0 */
-	gpio_set_level(GPIO_USB_C0_TCPC_RST_ODL, 0);
-	gpio_set_level(GPIO_USB_C1_RT_RST_R_ODL, 0);
-	msleep(GENERIC_MAX(PS8XXX_RESET_DELAY_MS,
-			   PS8815_PWR_H_RST_H_DELAY_MS));
-
-	gpio_set_level(GPIO_USB_C0_TCPC_RST_ODL, 1);
-	gpio_set_level(GPIO_USB_C1_RT_RST_R_ODL, 1);
-	/* wait for chips to come up */
-	msleep(PS8815_FW_INIT_DELAY_MS);
-
-	/* Port1 */
-	ps8815_reset();
-	usb_mux_hpd_update(USBC_PORT_C1, USB_PD_MUX_HPD_LVL_DEASSERTED |
-					 USB_PD_MUX_HPD_IRQ_DEASSERTED);
-}
-
-static void board_tcpc_init(void)
-{
-	int i;
-
-	/* Don't reset TCPCs after initial reset */
-	if (!system_jumped_late()) {
-		board_reset_pd_mcu();
-
-		for (i = 0; i < CONFIG_IO_EXPANDER_PORT_COUNT; ++i) {
-			ioex_config[i].flags &= ~IOEX_FLAGS_DISABLED;
-			ioex_init(i);
-		}
-	}
-
-	/* Enable PPC interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_PPC_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_PPC_INT_ODL);
-
-	/* Enable TCPC interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_TCPC_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_TCPC_INT_ODL);
-
-	/* Enable BC1.2 interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_ODL);
-}
-DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_CHIPSET);
-
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-
-	if (gpio_get_level(GPIO_USB_C0_TCPC_INT_ODL) == 0)
-		status |= PD_STATUS_TCPC_ALERT_0;
-
-	if (gpio_get_level(GPIO_USB_C1_TCPC_INT_ODL) == 0)
-		status |= PD_STATUS_TCPC_ALERT_1;
-
-	return status;
-}
-
-int ppc_get_alert_status(int port)
-{
-	if (port == USBC_PORT_C0)
-		return gpio_get_level(GPIO_USB_C0_PPC_INT_ODL) == 0;
-	else if (port == USBC_PORT_C1)
-		return gpio_get_level(GPIO_USB_C1_PPC_INT_ODL) == 0;
-	return 0;
-}
-
-void tcpc_alert_event(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_TCPC_INT_ODL:
-		schedule_deferred_pd_interrupt(USBC_PORT_C0);
-		break;
-	case GPIO_USB_C1_TCPC_INT_ODL:
-		schedule_deferred_pd_interrupt(USBC_PORT_C1);
-		break;
-	default:
-		break;
-	}
-}
-
-void bc12_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_BC12_INT_ODL:
-		task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-		break;
-	case GPIO_USB_C1_BC12_INT_ODL:
-		task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12);
-		break;
-	default:
-		break;
-	}
-}
-
-void ppc_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_PPC_INT_ODL:
-		syv682x_interrupt(USBC_PORT_C0);
-		break;
-	case GPIO_USB_C1_PPC_INT_ODL:
-		nx20p348x_interrupt(USBC_PORT_C1);
-		break;
-	default:
-		break;
-	}
-}
-
-void retimer_interrupt(enum gpio_signal signal)
-{
-	/*
-	 * TODO(b/179513527): add USB-C support
-	 */
-}
-
-__override bool board_is_dts_port(int port)
-{
-	return port == USBC_PORT_C0;
-}