1 files changed, 0 insertions, 78 deletions
diff --git a/board/grunt/board.c b/board/grunt/board.c
deleted file mode 100644
index 45aa4f4421..0000000000
--- a/board/grunt/board.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/* Copyright 2017 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Grunt board-specific configuration */
-
-#include "button.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/led/lm3630a.h"
-#include "extpower.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "switch.h"
-
-#include "gpio_list.h"
-
-const enum gpio_signal hibernate_wake_pins[] = {
-	GPIO_LID_OPEN,
-	GPIO_AC_PRESENT,
-	GPIO_POWER_BUTTON_L,
-};
-const int hibernate_wake_pins_used =  ARRAY_SIZE(hibernate_wake_pins);
-
-/* I2C port map. */
-const struct i2c_port_t i2c_ports[] = {
-	{"power",   I2C_PORT_POWER,   100, GPIO_I2C0_SCL, GPIO_I2C0_SDA},
-	{"tcpc0",   I2C_PORT_TCPC0,   400, GPIO_I2C1_SCL, GPIO_I2C1_SDA},
-	{"tcpc1",   I2C_PORT_TCPC1,   400, GPIO_I2C2_SCL, GPIO_I2C2_SDA},
-	{"thermal", I2C_PORT_THERMAL_AP, 400, GPIO_I2C3_SCL, GPIO_I2C3_SDA},
-	{"kblight", I2C_PORT_KBLIGHT, 100, GPIO_I2C5_SCL, GPIO_I2C5_SDA},
-	{"sensor",  I2C_PORT_SENSOR,  400, GPIO_I2C7_SCL, GPIO_I2C7_SDA},
-};
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_KBLIGHT] = {
-		.channel = 5,
-		.flags = PWM_CONFIG_DSLEEP,
-		.freq = 100,
-	},
-	[PWM_CH_LED1_AMBER] = {
-		.channel = 0,
-		.flags = (PWM_CONFIG_OPEN_DRAIN | PWM_CONFIG_ACTIVE_LOW
-			  | PWM_CONFIG_DSLEEP),
-		.freq = 100,
-	},
-	[PWM_CH_LED2_BLUE] =   {
-		.channel = 2,
-		.flags = (PWM_CONFIG_OPEN_DRAIN | PWM_CONFIG_ACTIVE_LOW
-			  | PWM_CONFIG_DSLEEP),
-		.freq = 100,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-void board_update_sensor_config_from_sku(void)
-{
-	/* Enable Gyro interrupts */
-	gpio_enable_interrupt(GPIO_6AXIS_INT_L);
-}
-
-static void board_kblight_init(void)
-{
-	/*
-	 * Enable keyboard backlight. This needs to be done here because
-	 * the chip doesn't have power until PP3300_S0 comes up.
-	 */
-	gpio_set_level(GPIO_KB_BL_EN, 1);
-	lm3630a_poweron();
-}
-DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_kblight_init, HOOK_PRIO_DEFAULT);