diff options
Diffstat (limited to 'board/hammer/gpio.inc')
| -rw-r--r-- | board/hammer/gpio.inc | 138 |
1 files changed, 0 insertions, 138 deletions
diff --git a/board/hammer/gpio.inc b/board/hammer/gpio.inc deleted file mode 100644 index 8372d4fc4b..0000000000 --- a/board/hammer/gpio.inc +++ /dev/null @@ -1,138 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2016 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. */ - -#ifdef SECTION_IS_RW -#ifndef HAS_NO_TOUCHPAD -GPIO_INT(TOUCHPAD_INT, PIN(B, 8), GPIO_INT_FALLING, touchpad_interrupt) -#endif /* !HAS_NO_TOUCHPAD */ -#ifdef CONFIG_GMR_TABLET_MODE -GPIO_INT(TABLET_MODE_L, PIN(B, 11), GPIO_PULL_UP | GPIO_INT_BOTH, gmr_tablet_switch_isr) -#endif /* CONFIG_GMR_TABLET_MODE */ -#endif /* SECTION_IS_RW */ - -/* Keyboard inputs */ -#define GPIO_KB_INPUT (GPIO_INPUT | GPIO_PULL_UP | GPIO_INT_BOTH) -#define GPIO_KB_OUTPUT GPIO_ODR_HIGH - -#ifdef BOARD_MASTERBALL -GPIO_INT(KB_IN00, PIN(B, 2), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN01, PIN(B, 13), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN02, PIN(B, 1), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN03, PIN(A, 6), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN04, PIN(B, 10), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN05, PIN(B, 12), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN06, PIN(A, 7), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN07, PIN(B, 0), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) - -/* Do not forget to update KB_OUT_PORT_LIST to match this. */ -GPIO(KB_OUT00, PIN(C, 15), GPIO_KB_OUTPUT) -GPIO(KB_OUT01, PIN(C, 14), GPIO_KB_OUTPUT) -GPIO(KB_OUT02, PIN(A, 2), GPIO_KB_OUTPUT) -GPIO(KB_OUT03, PIN(A, 1), GPIO_KB_OUTPUT) -GPIO(KB_OUT04, PIN(F, 1), GPIO_KB_OUTPUT) -GPIO(KB_OUT05, PIN(A, 3), GPIO_KB_OUTPUT) -GPIO(KB_OUT06, PIN(A, 0), GPIO_KB_OUTPUT) -GPIO(KB_OUT07, PIN(F, 0), GPIO_KB_OUTPUT) -GPIO(KB_OUT08, PIN(A, 5), GPIO_KB_OUTPUT) -GPIO(KB_OUT09, PIN(A, 4), GPIO_KB_OUTPUT) -GPIO(KB_OUT10, PIN(B, 14), GPIO_KB_OUTPUT) -GPIO(KB_OUT11, PIN(B, 15), GPIO_KB_OUTPUT) -GPIO(KB_OUT12, PIN(A, 8), GPIO_KB_OUTPUT) -#else /* !BOARD_MASTERBALL */ -GPIO_INT(KB_IN00, PIN(A, 4), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -#ifdef BOARD_WHISKERS -GPIO_INT(KB_IN01, PIN(B, 10), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -#else -GPIO_INT(KB_IN01, PIN(B, 3), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -#endif -GPIO_INT(KB_IN02, PIN(B, 0), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN03, PIN(A, 7), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN04, PIN(B, 12), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN05, PIN(B, 2), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN06, PIN(B, 14), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) -GPIO_INT(KB_IN07, PIN(B, 15), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) - -/* Do not forget to update KB_OUT_PORT_LIST to match this. */ -GPIO(KB_OUT00, PIN(B, 1), GPIO_KB_OUTPUT) -GPIO(KB_OUT01, PIN(A, 5), GPIO_KB_OUTPUT) -#ifdef BOARD_WAND -GPIO(KB_OUT02, PIN(A, 8), GPIO_KB_OUTPUT) -GPIO(KB_OUT03, PIN(B, 4), GPIO_KB_OUTPUT) -#else -GPIO(KB_OUT02, PIN(A, 3), GPIO_KB_OUTPUT) -GPIO(KB_OUT03, PIN(A, 2), GPIO_KB_OUTPUT) -#endif -GPIO(KB_OUT04, PIN(A, 6), GPIO_KB_OUTPUT) -GPIO(KB_OUT05, PIN(A, 0), GPIO_KB_OUTPUT) -GPIO(KB_OUT06, PIN(A, 1), GPIO_KB_OUTPUT) -GPIO(KB_OUT07, PIN(B, 13), GPIO_KB_OUTPUT) -GPIO(KB_OUT08, PIN(C, 14), GPIO_KB_OUTPUT) -GPIO(KB_OUT09, PIN(C, 15), GPIO_KB_OUTPUT) -GPIO(KB_OUT10, PIN(F, 1), GPIO_KB_OUTPUT) -GPIO(KB_OUT11, PIN(F, 0), GPIO_KB_OUTPUT) -GPIO(KB_OUT12, PIN(C, 13), GPIO_KB_OUTPUT) -#endif /* !BOARD_MASTERBALL */ - -/* I2C pins should be configured as inputs until I2C module is */ -/* initialized. This will avoid driving the lines unintentionally.*/ -GPIO(MASTER_I2C_SCL, PIN(B, 6), GPIO_INPUT) -GPIO(MASTER_I2C_SDA, PIN(B, 7), GPIO_INPUT) -#ifndef HAS_NO_TOUCHPAD -/* TODO(crosbug.com/p/59083): Disable trackpad when appropriate */ -#ifdef HAS_EN_PP3300_TP_ACTIVE_HIGH -GPIO(EN_PP3300_TP, PIN(A, 14), GPIO_OUT_HIGH) -#else -GPIO(EN_PP3300_TP_ODL, PIN(A, 14), GPIO_OUT_LOW) -#endif -#endif /* !HAS_NO_TOUCHPAD */ - -#ifdef HAS_BACKLIGHT -GPIO(KEYBOARD_BACKLIGHT, PIN(B, 9), GPIO_INPUT) -#endif - -GPIO(WP_L, PIN(A, 13), GPIO_INPUT | GPIO_PULL_UP) - -#ifdef BOARD_WAND -GPIO(BASE_UART_TX_RX, PIN(A, 2), GPIO_ODR_HIGH) - -GPIO(CHARGER_I2C_SCL, PIN(B, 10), GPIO_INPUT) -GPIO(CHARGER_I2C_SDA, PIN(B, 11), GPIO_INPUT) - -GPIO(SWITCH_STATUS, PIN(A, 15), GPIO_INPUT) -GPIO(EN_OTG, PIN(B, 5), GPIO_INPUT) -#elif defined(BOARD_WHISKERS) -GPIO(DETECT_PATH_DISABLE_L, PIN(A, 8), GPIO_ODR_LOW) -GPIO(SPI1_NSS, PIN(A, 15), GPIO_OUT_HIGH) -GPIO(BACKLIGHT_EN, PIN(B, 4), GPIO_ODR_HIGH | GPIO_PULL_UP) -#else -GPIO(BASE_DET, PIN(A, 15), GPIO_INPUT) -#endif - -/* Unimplemented signals since we are not an EC */ -UNIMPLEMENTED(ENTERING_RW) - -ALTERNATE(PIN_MASK(A, 0x0600), 1, MODULE_UART, GPIO_PULL_UP) /* USART1: PA09/PA10 - Servo stm32 console UART */ - -#ifdef BOARD_WAND -ALTERNATE(PIN_MASK(A, 0x0004), 1, MODULE_USART, GPIO_ODR_HIGH) /* USART2: PA2 - EC-EC UART */ -ALTERNATE(PIN_MASK(B, 0x0c00), 1, MODULE_I2C, 0) /* I2C CHARGER: PB10/11 GPIO_ODR_HIGH */ -#endif - -#ifdef HAS_SPI_TOUCHPAD -ALTERNATE(PIN_MASK(B, 0x0038), 0, MODULE_SPI_CONTROLLER, 0) /* SPI MASTER:PB3/4/5 */ -#endif - -#ifdef CONFIG_I2C -ALTERNATE(PIN_MASK(B, 0x00c0), 1, MODULE_I2C, 0) /* I2C TOUCHPAD: PB6/7 GPIO_ODR_HIGH */ -#endif - -#ifdef HAS_BACKLIGHT -ALTERNATE(PIN_MASK(B, 0x0200), 2, MODULE_PWM, GPIO_PULL_DOWN) /* PWM: PB9 */ -#endif |