summaryrefslogtreecommitdiff
path: root/board/hatch/board.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/hatch/board.c')
-rw-r--r--board/hatch/board.c500
1 files changed, 0 insertions, 500 deletions
diff --git a/board/hatch/board.c b/board/hatch/board.c
deleted file mode 100644
index 75f3b5f6cb..0000000000
--- a/board/hatch/board.c
+++ /dev/null
@@ -1,500 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Hatch board-specific configuration */
-
-#include "adc.h"
-#include "button.h"
-#include "common.h"
-#include "cros_board_info.h"
-#include "driver/accel_bma2x2.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/als_tcs3400.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/ppc/sn5s330.h"
-#include "driver/tcpm/anx7447.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "driver/tcpm/tcpci.h"
-#include "ec_commands.h"
-#include "extpower.h"
-#include "fan.h"
-#include "fan_chip.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "host_command.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "spi.h"
-#include "switch.h"
-#include "system.h"
-#include "task.h"
-#include "temp_sensor.h"
-#include "thermal.h"
-#include "temp_sensor/thermistor.h"
-#include "uart.h"
-#include "usb_charge.h"
-#include "usb_pd.h"
-#include "usbc_ppc.h"
-#include "util.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-/* GPIO to enable/disable the USB Type-A port. */
-const int usb_port_enable[CONFIG_USB_PORT_POWER_SMART_PORT_COUNT] = {
- GPIO_EN_USB_A_5V,
-};
-
-static void ppc_interrupt(enum gpio_signal signal)
-{
- switch (signal) {
- case GPIO_USB_C0_PPC_INT_ODL:
- sn5s330_interrupt(0);
- break;
-
- case GPIO_USB_C1_PPC_INT_ODL:
- sn5s330_interrupt(1);
- break;
-
- default:
- break;
- }
-}
-
-static void tcpc_alert_event(enum gpio_signal signal)
-{
- int port = -1;
-
- switch (signal) {
- case GPIO_USB_C0_TCPC_INT_ODL:
- port = 0;
- break;
- case GPIO_USB_C1_TCPC_INT_ODL:
- port = 1;
- break;
- default:
- return;
- }
-
- schedule_deferred_pd_interrupt(port);
-}
-
-static void hdmi_hpd_interrupt(enum gpio_signal signal)
-{
- baseboard_mst_enable_control(MST_HDMI, gpio_get_level(signal));
-}
-
-static void bc12_interrupt(enum gpio_signal signal)
-{
- switch (signal) {
- case GPIO_USB_C0_BC12_INT_ODL:
- task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
- break;
-
- case GPIO_USB_C1_BC12_INT_ODL:
- task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12);
- break;
-
- default:
- break;
- }
-}
-
-#include "gpio_list.h" /* Must come after other header files. */
-
-/******************************************************************************/
-/* SPI devices */
-const struct spi_device_t spi_devices[] = {
-};
-const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices);
-
-/******************************************************************************/
-/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
-const struct pwm_t pwm_channels[] = {
- [PWM_CH_KBLIGHT] = { .channel = 3, .flags = 0, .freq = 10000 },
- [PWM_CH_FAN] = {.channel = 5, .flags = PWM_CONFIG_OPEN_DRAIN,
- .freq = 25000},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/******************************************************************************/
-/* USB-C TPCP Configuration */
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
- [USB_PD_PORT_TCPC_0] = {
- .bus_type = EC_BUS_TYPE_I2C,
- .i2c_info = {
- .port = I2C_PORT_TCPC0,
- .addr_flags = AN7447_TCPC0_I2C_ADDR_FLAGS,
- },
- .drv = &anx7447_tcpm_drv,
- .flags = TCPC_FLAGS_RESET_ACTIVE_HIGH,
- },
- [USB_PD_PORT_TCPC_1] = {
- .bus_type = EC_BUS_TYPE_I2C,
- .i2c_info = {
- .port = I2C_PORT_TCPC1,
- .addr_flags = PS8751_I2C_ADDR1_FLAGS,
- },
- .drv = &ps8xxx_tcpm_drv,
- },
-};
-
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
- [USB_PD_PORT_TCPC_0] = {
- .usb_port = USB_PD_PORT_TCPC_0,
- .driver = &anx7447_usb_mux_driver,
- .hpd_update = &anx7447_tcpc_update_hpd_status,
- },
- [USB_PD_PORT_TCPC_1] = {
- .usb_port = USB_PD_PORT_TCPC_1,
- .driver = &tcpci_tcpm_usb_mux_driver,
- .hpd_update = &ps8xxx_tcpc_update_hpd_status,
- }
-};
-
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
- [USB_PD_PORT_TCPC_0] = {
- .i2c_port = I2C_PORT_PPC0,
- .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
- },
-
- [USB_PD_PORT_TCPC_1] = {
- .i2c_port = I2C_PORT_TCPC1,
- .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
- },
-};
-
-/******************************************************************************/
-/* Sensors */
-/* Base Sensor mutex */
-static struct mutex g_base_mutex;
-static struct mutex g_lid_mutex;
-
-/* Base accel private data */
-static struct bmi_drv_data_t g_bmi160_data;
-
-/* BMA255 private data */
-static struct accelgyro_saved_data_t g_bma255_data;
-
-/* TCS3400 private data */
-static struct als_drv_data_t g_tcs3400_data = {
- .als_cal.scale = 1,
- .als_cal.uscale = 0,
- .als_cal.offset = 0,
- .als_cal.channel_scale = {
- .k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kc */
- .cover_scale = ALS_CHANNEL_SCALE(1.0), /* CT */
- },
-};
-
-static struct tcs3400_rgb_drv_data_t g_tcs3400_rgb_data = {
- .calibration.rgb_cal[X] = {
- .offset = 0,
- .scale = {
- .k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kr */
- .cover_scale = ALS_CHANNEL_SCALE(1.0)
- },
- },
- .calibration.rgb_cal[Y] = {
- .offset = 0,
- .scale = {
- .k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kg */
- .cover_scale = ALS_CHANNEL_SCALE(1.0)
- },
- },
- .calibration.rgb_cal[Z] = {
- .offset = 0,
- .scale = {
- .k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kb */
- .cover_scale = ALS_CHANNEL_SCALE(1.0)
- },
- },
- .calibration.irt = INT_TO_FP(1),
- .saturation.again = TCS_DEFAULT_AGAIN,
- .saturation.atime = TCS_DEFAULT_ATIME,
-};
-
-/* Matrix to rotate accelrator into standard reference frame */
-static const mat33_fp_t base_standard_ref = {
- { 0, FLOAT_TO_FP(1), 0},
- { FLOAT_TO_FP(-1), 0, 0},
- { 0, 0, FLOAT_TO_FP(1)}
-};
-
-/*
- * TODO(b/124337208): P0 boards don't have this sensor mounted so the rotation
- * matrix can't be tested properly. This needs to be revisited after EVT to make
- * sure the rotaiton matrix for the lid sensor is correct.
- */
-static const mat33_fp_t lid_standard_ref = {
- { 0, FLOAT_TO_FP(-1), 0},
- { FLOAT_TO_FP(-1), 0, 0},
- { 0, 0, FLOAT_TO_FP(-1)}
-};
-
-struct motion_sensor_t motion_sensors[] = {
- [LID_ACCEL] = {
- .name = "Lid Accel",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_BMA255,
- .type = MOTIONSENSE_TYPE_ACCEL,
- .location = MOTIONSENSE_LOC_LID,
- .drv = &bma2x2_accel_drv,
- .mutex = &g_lid_mutex,
- .drv_data = &g_bma255_data,
- .port = I2C_PORT_ACCEL,
- .i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS,
- .rot_standard_ref = &lid_standard_ref,
- .min_frequency = BMA255_ACCEL_MIN_FREQ,
- .max_frequency = BMA255_ACCEL_MAX_FREQ,
- .default_range = 2, /* g, to support lid angle calculation. */
- .config = {
- /* EC use accel for angle detection */
- [SENSOR_CONFIG_EC_S0] = {
- .odr = 10000 | ROUND_UP_FLAG,
- },
- /* Sensor on in S3 */
- [SENSOR_CONFIG_EC_S3] = {
- .odr = 10000 | ROUND_UP_FLAG,
- },
- },
- },
-
- [BASE_ACCEL] = {
- .name = "Base Accel",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_BMI160,
- .type = MOTIONSENSE_TYPE_ACCEL,
- .location = MOTIONSENSE_LOC_BASE,
- .drv = &bmi160_drv,
- .mutex = &g_base_mutex,
- .drv_data = &g_bmi160_data,
- .port = I2C_PORT_ACCEL,
- .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
- .rot_standard_ref = &base_standard_ref,
- .min_frequency = BMI_ACCEL_MIN_FREQ,
- .max_frequency = BMI_ACCEL_MAX_FREQ,
- .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs */
- .config = {
- [SENSOR_CONFIG_EC_S0] = {
- .odr = 10000 | ROUND_UP_FLAG,
- },
- /* Sensor on in S3 */
- [SENSOR_CONFIG_EC_S3] = {
- .odr = 10000 | ROUND_UP_FLAG,
- },
- },
- },
-
- [BASE_GYRO] = {
- .name = "Base Gyro",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_BMI160,
- .type = MOTIONSENSE_TYPE_GYRO,
- .location = MOTIONSENSE_LOC_BASE,
- .drv = &bmi160_drv,
- .mutex = &g_base_mutex,
- .drv_data = &g_bmi160_data,
- .port = I2C_PORT_ACCEL,
- .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
- .default_range = 1000, /* dps */
- .rot_standard_ref = &base_standard_ref,
- .min_frequency = BMI_GYRO_MIN_FREQ,
- .max_frequency = BMI_GYRO_MAX_FREQ,
- },
-
- [CLEAR_ALS] = {
- .name = "Clear Light",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_TCS3400,
- .type = MOTIONSENSE_TYPE_LIGHT,
- .location = MOTIONSENSE_LOC_LID,
- .drv = &tcs3400_drv,
- .drv_data = &g_tcs3400_data,
- .port = I2C_PORT_ALS,
- .i2c_spi_addr_flags = TCS3400_I2C_ADDR_FLAGS,
- .rot_standard_ref = NULL,
- .default_range = 0x10000, /* scale = 1x, uscale = 0 */
- .min_frequency = TCS3400_LIGHT_MIN_FREQ,
- .max_frequency = TCS3400_LIGHT_MAX_FREQ,
- .config = {
- /* Run ALS sensor in S0 */
- [SENSOR_CONFIG_EC_S0] = {
- .odr = 1000,
- },
- },
- },
-
- [RGB_ALS] = {
- /*
- * RGB channels read by CLEAR_ALS and so the i2c port and
- * address do not need to be defined for RGB_ALS.
- */
- .name = "RGB Light",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_TCS3400,
- .type = MOTIONSENSE_TYPE_LIGHT_RGB,
- .location = MOTIONSENSE_LOC_LID,
- .drv = &tcs3400_rgb_drv,
- .drv_data = &g_tcs3400_rgb_data,
- .rot_standard_ref = NULL,
- .default_range = 0x10000, /* scale = 1x, uscale = 0 */
- },
-};
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/* ALS instances when LPC mapping is needed. Each entry directs to a sensor. */
-const struct motion_sensor_t *motion_als_sensors[] = {
- &motion_sensors[CLEAR_ALS],
-};
-BUILD_ASSERT(ARRAY_SIZE(motion_als_sensors) == ALS_COUNT);
-
-/******************************************************************************/
-/* Physical fans. These are logically separate from pwm_channels. */
-
-const struct fan_conf fan_conf_0 = {
- .flags = FAN_USE_RPM_MODE,
- .ch = MFT_CH_0, /* Use MFT id to control fan */
- .pgood_gpio = -1,
- .enable_gpio = GPIO_EN_PP5000_FAN,
-};
-
-/* Default */
-const struct fan_rpm fan_rpm_0 = {
- .rpm_min = 3100,
- .rpm_start = 3100,
- .rpm_max = 6900,
-};
-
-const struct fan_t fans[FAN_CH_COUNT] = {
- [FAN_CH_0] = { .conf = &fan_conf_0, .rpm = &fan_rpm_0, },
-};
-
-/******************************************************************************/
-/* MFT channels. These are logically separate from pwm_channels. */
-const struct mft_t mft_channels[] = {
- [MFT_CH_0] = {NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN},
-};
-BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT);
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
- [ADC_TEMP_SENSOR_1] = {
- "TEMP_AMB", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
- [ADC_TEMP_SENSOR_2] = {
- "TEMP_CHARGER", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-const struct temp_sensor_t temp_sensors[] = {
- [TEMP_SENSOR_1] = {.name = "Temp1",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = get_temp_3v3_30k9_47k_4050b,
- .idx = ADC_TEMP_SENSOR_1},
- [TEMP_SENSOR_2] = {.name = "Temp2",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = get_temp_3v3_30k9_47k_4050b,
- .idx = ADC_TEMP_SENSOR_2},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-
-/* Hatch Temperature sensors */
-/*
- * TODO(b/124316213): These setting need to be reviewed and set appropriately
- * for Hatch. They matter when the EC is controlling the fan as opposed to DPTF
- * control.
- */
-const static struct ec_thermal_config thermal_a = {
- .temp_host = {
- [EC_TEMP_THRESH_WARN] = 0,
- [EC_TEMP_THRESH_HIGH] = C_TO_K(75),
- [EC_TEMP_THRESH_HALT] = C_TO_K(80),
- },
- .temp_host_release = {
- [EC_TEMP_THRESH_WARN] = 0,
- [EC_TEMP_THRESH_HIGH] = C_TO_K(65),
- [EC_TEMP_THRESH_HALT] = 0,
- },
- .temp_fan_off = C_TO_K(25),
- .temp_fan_max = C_TO_K(50),
-};
-
-struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT];
-
-static void setup_fans(void)
-{
- thermal_params[TEMP_SENSOR_1] = thermal_a;
- thermal_params[TEMP_SENSOR_2] = thermal_a;
-}
-
-/* Sets the gpio flags correct taking into account warm resets */
-static void reset_gpio_flags(enum gpio_signal signal, int flags)
-{
- /*
- * If the system was already on, we cannot set the value otherwise we
- * may change the value from the previous image which could cause a
- * brownout.
- */
- if (system_is_reboot_warm() || system_jumped_late())
- flags &= ~(GPIO_LOW | GPIO_HIGH);
-
- gpio_set_flags(signal, flags);
-}
-
-/* Runtime GPIO defaults */
-enum gpio_signal gpio_en_pp5000_a = GPIO_EN_PP5000_A_V1;
-
-static void board_gpio_set_pp5000(void)
-{
- uint32_t board_id = 0;
-
- /* Errors will count as board_id 0 */
- cbi_get_board_version(&board_id);
-
- if (board_id == 0) {
- reset_gpio_flags(GPIO_EN_PP5000_A_V0, GPIO_OUT_LOW);
- /* Change runtime default for V0 */
- gpio_en_pp5000_a = GPIO_EN_PP5000_A_V0;
- } else if (board_id >= 1) {
- reset_gpio_flags(GPIO_EN_PP5000_A_V1, GPIO_OUT_LOW);
- }
-
-}
-
-static void board_init(void)
-{
- /* Initialize Fans */
- setup_fans();
- /* Enable gpio interrupt for base accelgyro sensor */
- gpio_enable_interrupt(GPIO_BASE_SIXAXIS_INT_L);
- /* Enable interrupt for the TCS3400 color light sensor */
- gpio_enable_interrupt(GPIO_TCS3400_INT_ODL);
- /* Enable HDMI HPD interrupt. */
- gpio_enable_interrupt(GPIO_HDMI_CONN_HPD);
- /* Select correct gpio signal for PP5000_A control */
- board_gpio_set_pp5000();
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-void board_overcurrent_event(int port, int is_overcurrented)
-{
- /* Check that port number is valid. */
- if ((port < 0) || (port >= CONFIG_USB_PD_PORT_MAX_COUNT))
- return;
-
- /* Note that the level is inverted because the pin is active low. */
- gpio_set_level(GPIO_USB_C_OC_ODL, !is_overcurrented);
-}
-
-bool board_is_convertible(void)
-{
- const uint8_t sku = get_board_sku();
-
- return (sku == 255);
-}
View Lorry Controller Status