diff options
Diffstat (limited to 'board/hatch_fp/board.h')
| -rw-r--r-- | board/hatch_fp/board.h | 258 |
1 files changed, 0 insertions, 258 deletions
diff --git a/board/hatch_fp/board.h b/board/hatch_fp/board.h deleted file mode 100644 index aa097d8b7e..0000000000 --- a/board/hatch_fp/board.h +++ /dev/null @@ -1,258 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* - * STM32F412 + FPC 1025 Fingerprint MCU configuration - * - * Alternate names that share this same board file: - * hatch_fp - * bloonchipper - * dragonclaw - */ - -#ifndef __BOARD_H -#define __BOARD_H - -#undef CONFIG_SYSTEM_UNLOCKED - -/*-------------------------------------------------------------------------* - * Flash layout: - * - * +++++++++++++ - * | RO | - * | ......... | - * | Rollback | (two sectors) - * +-----------+ - * | RW | - * | | - * | | - * | | - * | | - * +++++++++++++ - * - * We adjust the following macros to accommodate a for a rollback, RO, - * and RW region of different sizes. - * - *-------------------------------------------------------------------------*/ - -#undef _IMAGE_SIZE -#undef CONFIG_ROLLBACK_OFF -#undef CONFIG_ROLLBACK_SIZE -#undef CONFIG_FLASH_PSTATE -#undef CONFIG_FW_PSTATE_SIZE -#undef CONFIG_FW_PSTATE_OFF -#undef CONFIG_SHAREDLIB_SIZE -#undef CONFIG_RO_MEM_OFF -#undef CONFIG_RO_STORAGE_OFF -#undef CONFIG_RO_SIZE -#undef CONFIG_RW_MEM_OFF -#undef CONFIG_RW_STORAGE_OFF -#undef CONFIG_RW_SIZE -#undef CONFIG_EC_PROTECTED_STORAGE_OFF -#undef CONFIG_EC_PROTECTED_STORAGE_SIZE -#undef CONFIG_EC_WRITABLE_STORAGE_OFF -#undef CONFIG_EC_WRITABLE_STORAGE_SIZE -#undef CONFIG_WP_STORAGE_OFF -#undef CONFIG_WP_STORAGE_SIZE - -#define CONFIG_FLASH_WRITE_SIZE STM32_FLASH_WRITE_SIZE_3300 - -#define CONFIG_SHAREDLIB_SIZE 0 - -#define CONFIG_RO_MEM_OFF 0 -#define CONFIG_RO_STORAGE_OFF 0 -#define CONFIG_RO_SIZE (128 * 1024) - -/* EC rollback protection block */ -#define CONFIG_ROLLBACK_OFF (CONFIG_RO_MEM_OFF + CONFIG_RO_SIZE) -#define CONFIG_ROLLBACK_SIZE (128 * 1024 * 2) /* 2 blocks of 128KB each */ - -#define CONFIG_RW_MEM_OFF (CONFIG_ROLLBACK_OFF + CONFIG_ROLLBACK_SIZE) -#define CONFIG_RW_STORAGE_OFF 0 -#define CONFIG_RW_SIZE (CONFIG_FLASH_SIZE_BYTES - \ - (CONFIG_RW_MEM_OFF - CONFIG_RO_MEM_OFF)) - -#define CONFIG_EC_PROTECTED_STORAGE_OFF CONFIG_RO_MEM_OFF -#define CONFIG_EC_PROTECTED_STORAGE_SIZE CONFIG_RO_SIZE -#define CONFIG_EC_WRITABLE_STORAGE_OFF CONFIG_RW_MEM_OFF -#define CONFIG_EC_WRITABLE_STORAGE_SIZE CONFIG_RW_SIZE - -#define CONFIG_WP_STORAGE_OFF CONFIG_EC_PROTECTED_STORAGE_OFF -#define CONFIG_WP_STORAGE_SIZE CONFIG_EC_PROTECTED_STORAGE_SIZE - -/* - * We want to prevent flash readout, and use it as indicator of protection - * status. - */ -#define CONFIG_FLASH_READOUT_PROTECTION_AS_PSTATE - -/*-------------------------------------------------------------------------* - * USART Transport Setup - *-------------------------------------------------------------------------*/ -/* Enable USART host commands */ -#define CONFIG_USART_HOST_COMMAND -/* Enable USART and USART1 stream */ -#define CONFIG_STREAM_USART -#define CONFIG_STREAM_USART1 -/* Allocate and configure hw instance of USART */ -#undef CONFIG_UART_HOST_COMMAND_HW -#define CONFIG_UART_HOST_COMMAND_HW usart1_hw -/* Set baud rate of USART */ -#undef CONFIG_UART_HOST_COMMAND_BAUD_RATE -#define CONFIG_UART_HOST_COMMAND_BAUD_RATE 3000000 - -/*-------------------------------------------------------------------------* - * UART Console Setup - *-------------------------------------------------------------------------*/ - -/* The UART console is on USART2 */ -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 2 -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 2048 -/* We don't currently use DMA. */ -#undef CONFIG_UART_TX_DMA_PH -#undef CONFIG_UART_TX_DMA -#undef CONFIG_UART_RX_DMA -#undef CONFIG_UART_TX_REQ_CH -#undef CONFIG_UART_RX_REQ_CH - -/*-------------------------------------------------------------------------* - * Console Commands - *-------------------------------------------------------------------------*/ - -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IDLE_STATS - -#ifdef SECTION_IS_RW -#define CONFIG_CMD_SPI_XFER -/* TODO(b/130249462): remove for release */ -#define CONFIG_CMD_FPSENSOR_DEBUG -#endif - -/* - * These allow console commands to be flagged as restricted. - * Restricted commands will only be permitted to run when - * console_is_restricted() returns false. - * See console_is_restricted's definition in board.c. - */ -#define CONFIG_CONSOLE_COMMAND_FLAGS -#define CONFIG_RESTRICTED_CONSOLE_COMMANDS - -/*-------------------------------------------------------------------------* - * Rollback Block - *-------------------------------------------------------------------------*/ - -#define CONFIG_ROLLBACK -#define CONFIG_ROLLBACK_SECRET_SIZE 32 -#define CONFIG_MPU -#define CONFIG_ROLLBACK_MPU_PROTECT - -/* - * We do not use any "locally" generated entropy: this is normally used - * to add local entropy when the main source of entropy is remote. - */ -#undef CONFIG_ROLLBACK_SECRET_LOCAL_ENTROPY_SIZE -#ifdef SECTION_IS_RW -#undef CONFIG_ROLLBACK_UPDATE -#endif - -/*-------------------------------------------------------------------------* - * RW Signature Verification - *-------------------------------------------------------------------------*/ - -#ifdef SECTION_IS_RO -/* RO verifies the RW partition signature */ -#define CONFIG_RSA -#define CONFIG_RWSIG -#endif /* SECTION_IS_RO */ -#define CONFIG_RSA_KEY_SIZE 3072 -#define CONFIG_RSA_EXPONENT_3 -#define CONFIG_RWSIG_TYPE_RWSIG - -/*-------------------------------------------------------------------------* - * Watchdog - *-------------------------------------------------------------------------*/ - -/* - * RW does slow compute, RO does slow flash erase. - */ -#undef CONFIG_WATCHDOG_PERIOD_MS -#define CONFIG_WATCHDOG_PERIOD_MS 10000 -#define CONFIG_WATCHDOG_HELP - -/*-------------------------------------------------------------------------* - * Fingerprint Specific - *-------------------------------------------------------------------------*/ - -/* SPI configuration for the fingerprint sensor */ -#define CONFIG_SPI_CONTROLLER -#define CONFIG_SPI_FP_PORT 0 /* SPI2: first master config */ -#define CONFIG_FINGERPRINT_MCU -#ifdef SECTION_IS_RW -#define CONFIG_FP_SENSOR_FPC1025 -/* - * Use the malloc code only in the RW section (for the private library), - * we cannot enable it in RO since it is not compatible with the RW verification - * (shared_mem_init done too late). - */ -#define CONFIG_MALLOC -/* - * FP buffers are allocated in regular SRAM on STM32F4. - * TODO(b/124773209): Instead of defining to empty, #undef once all CLs that - * depend on FP_*_SECTION have landed. Also rename the variables to CONFIG_*. - */ -#define FP_FRAME_SECTION -#define FP_TEMPLATE_SECTION -#endif /* SECTION_IS_RW */ - -/*-------------------------------------------------------------------------* - * Disable Features - *-------------------------------------------------------------------------*/ - -#undef CONFIG_ADC -#undef CONFIG_HIBERNATE -#undef CONFIG_I2C -#undef CONFIG_LID_SWITCH -#undef CONFIG_TASK_PROFILING - -/*-------------------------------------------------------------------------* - * Other - *-------------------------------------------------------------------------*/ - -#define CONFIG_AES -#define CONFIG_AES_GCM -#define CONFIG_DMA -#define CONFIG_FPU -#define CONFIG_HOST_COMMAND_STATUS -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_GPIO -#define CONFIG_PRINTF_LEGACY_LI_FORMAT -#define CONFIG_RNG -#define CONFIG_SHA256 -#define CONFIG_SHA256_UNROLLED -#define CONFIG_SPI -#define CONFIG_STM_HWTIMER32 -#define CONFIG_WP_ACTIVE_HIGH -#define CONFIG_PANIC_STRIP_GPR - -#ifdef SECTION_IS_RW -#define CONFIG_LOW_POWER_IDLE -#endif /* SECTION_IS_RW */ - -#ifndef __ASSEMBLER__ - -/* Timer selection */ -#define TIM_CLOCK32 2 -#define TIM_WATCHDOG 9 - -#include "gpio_signal.h" -#include "board_rw.h" - -void slp_event(enum gpio_signal signal); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __BOARD_H */ |