summaryrefslogtreecommitdiff
path: root/board/helios/board.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/helios/board.c')
-rw-r--r--board/helios/board.c509
1 files changed, 0 insertions, 509 deletions
diff --git a/board/helios/board.c b/board/helios/board.c
deleted file mode 100644
index cd2fb7e798..0000000000
--- a/board/helios/board.c
+++ /dev/null
@@ -1,509 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Helios board-specific configuration */
-
-#include "adc.h"
-#include "button.h"
-#include "common.h"
-#include "cros_board_info.h"
-#include "driver/accel_bma2x2.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/accelgyro_icm_common.h"
-#include "driver/accelgyro_icm426xx.h"
-#include "driver/als_opt3001.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/ppc/sn5s330.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "driver/tcpm/tcpci.h"
-#include "ec_commands.h"
-#include "extpower.h"
-#include "fan.h"
-#include "fan_chip.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "host_command.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "spi.h"
-#include "switch.h"
-#include "system.h"
-#include "tablet_mode.h"
-#include "task.h"
-#include "temp_sensor.h"
-#include "thermal.h"
-#include "temp_sensor/thermistor.h"
-#include "uart.h"
-#include "usb_charge.h"
-#include "usb_pd.h"
-#include "usbc_ppc.h"
-#include "util.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-static void ppc_interrupt(enum gpio_signal signal)
-{
- switch (signal) {
- case GPIO_USB_C0_PPC_INT_ODL:
- sn5s330_interrupt(0);
- break;
-
- case GPIO_USB_C1_PPC_INT_ODL:
- sn5s330_interrupt(1);
- break;
-
- default:
- break;
- }
-}
-
-static void tcpc_alert_event(enum gpio_signal signal)
-{
- int port = -1;
-
- switch (signal) {
- case GPIO_USB_C0_TCPC_INT_ODL:
- port = 0;
- break;
- case GPIO_USB_C1_TCPC_INT_ODL:
- port = 1;
- break;
- default:
- return;
- }
-
- schedule_deferred_pd_interrupt(port);
-}
-
-static void bc12_interrupt(enum gpio_signal signal)
-{
- switch (signal) {
- case GPIO_USB_C0_BC12_INT_ODL:
- task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
- break;
-
- case GPIO_USB_C1_BC12_INT_ODL:
- task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12);
- break;
-
- default:
- break;
- }
-}
-
-static void board_lid_interrupt(enum gpio_signal signal)
-{
- static int board_id = -1;
-
- if (board_id == -1) {
- uint32_t val;
-
- if (cbi_get_board_version(&val) == EC_SUCCESS)
- board_id = val;
- }
-
- /*
- * This is a workaround with board version #1 where lid open can be
- * incorrectly triggered in 360-degree mode.
- */
- if ((board_id == 1) && tablet_get_mode())
- return;
-
- lid_interrupt(signal);
-}
-
-static void board_gmr_tablet_switch_isr(enum gpio_signal signal)
-{
- /*
- * For board version more than 2, the DUT support GMR sensor.
- * Else, blocked tablet_mode interrupt.
- */
- if (get_board_id() < 2)
- return;
-
- gmr_tablet_switch_isr(signal);
-}
-
-#include "gpio_list.h" /* Must come after other header files. */
-
-/******************************************************************************/
-/* SPI devices */
-const struct spi_device_t spi_devices[] = {
-};
-const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices);
-
-/******************************************************************************/
-/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
-const struct pwm_t pwm_channels[] = {
- [PWM_CH_KBLIGHT] = { .channel = 3, .flags = 0, .freq = 10000 },
- [PWM_CH_FAN] = {.channel = 5, .flags = PWM_CONFIG_OPEN_DRAIN,
- .freq = 25000},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/******************************************************************************/
-/* USB-C TPCP Configuration */
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
- [USB_PD_PORT_TCPC_0] = {
- .bus_type = EC_BUS_TYPE_I2C,
- .i2c_info = {
- .port = I2C_PORT_TCPC0,
- .addr_flags = PS8751_I2C_ADDR1_FLAGS,
- },
- .drv = &ps8xxx_tcpm_drv,
- },
- [USB_PD_PORT_TCPC_1] = {
- .bus_type = EC_BUS_TYPE_I2C,
- .i2c_info = {
- .port = I2C_PORT_TCPC1,
- .addr_flags = PS8751_I2C_ADDR1_FLAGS,
- },
- .drv = &ps8xxx_tcpm_drv,
- },
-};
-
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
- [USB_PD_PORT_TCPC_0] = {
- .usb_port = USB_PD_PORT_TCPC_0,
- .driver = &tcpci_tcpm_usb_mux_driver,
- .hpd_update = &ps8xxx_tcpc_update_hpd_status,
- },
- [USB_PD_PORT_TCPC_1] = {
- .usb_port = USB_PD_PORT_TCPC_1,
- .driver = &tcpci_tcpm_usb_mux_driver,
- .hpd_update = &ps8xxx_tcpc_update_hpd_status,
- }
-};
-
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
- [USB_PD_PORT_TCPC_0] = {
- .i2c_port = I2C_PORT_PPC0,
- .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
- },
-
- [USB_PD_PORT_TCPC_1] = {
- .i2c_port = I2C_PORT_TCPC1,
- .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
- },
-};
-
-/******************************************************************************/
-/* Sensors */
-/* Base Sensor mutex */
-static struct mutex g_base_mutex;
-static struct mutex g_lid_mutex;
-
-/* Base accel private data */
-static struct bmi_drv_data_t g_bmi160_data;
-static struct icm_drv_data_t g_icm426xx_data;
-
-/* BMA255 private data */
-static struct accelgyro_saved_data_t g_bma255_data;
-
-enum base_accelgyro_type {
- BASE_GYRO_NONE = 0,
- BASE_GYRO_BMI160 = 1,
- BASE_GYRO_ICM426XX = 2,
-};
-
-static enum base_accelgyro_type base_accelgyro_config;
-
-/* Matrix to rotate accelrator into standard reference frame */
-static const mat33_fp_t base_standard_ref = {
- { 0, FLOAT_TO_FP(1), 0},
- { FLOAT_TO_FP(1), 0, 0},
- { 0, 0, FLOAT_TO_FP(-1)}
-};
-
-static const mat33_fp_t lid_standard_ref = {
- { 0, FLOAT_TO_FP(1), 0},
- { FLOAT_TO_FP(1), 0, 0},
- { 0, 0, FLOAT_TO_FP(-1)}
-};
-
-static const mat33_fp_t base_standard_ref_icm = {
- { FLOAT_TO_FP(-1), 0, 0},
- { 0, FLOAT_TO_FP(1), 0},
- { 0, 0, FLOAT_TO_FP(-1)},
-};
-
-struct motion_sensor_t icm426xx_base_accel = {
- .name = "Base Accel",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_ICM426XX,
- .type = MOTIONSENSE_TYPE_ACCEL,
- .location = MOTIONSENSE_LOC_BASE,
- .drv = &icm426xx_drv,
- .mutex = &g_base_mutex,
- .drv_data = &g_icm426xx_data,
- .port = I2C_PORT_ACCEL,
- .i2c_spi_addr_flags = ICM426XX_ADDR0_FLAGS,
- .rot_standard_ref = &base_standard_ref_icm,
- .min_frequency = ICM426XX_ACCEL_MIN_FREQ,
- .max_frequency = ICM426XX_ACCEL_MAX_FREQ,
- .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs. */
- .config = {
- [SENSOR_CONFIG_EC_S0] = {
- .odr = 10000 | ROUND_UP_FLAG,
- .ec_rate = 100 * MSEC,
- },
- /* Sensor on in S3 */
- [SENSOR_CONFIG_EC_S3] = {
- .odr = 10000 | ROUND_UP_FLAG,
- .ec_rate = 100 * MSEC,
- },
- },
-};
-
-struct motion_sensor_t icm426xx_base_gyro = {
- .name = "Base Gyro",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_ICM426XX,
- .type = MOTIONSENSE_TYPE_GYRO,
- .location = MOTIONSENSE_LOC_BASE,
- .drv = &icm426xx_drv,
- .mutex = &g_base_mutex,
- .drv_data = &g_icm426xx_data,
- .port = I2C_PORT_ACCEL,
- .i2c_spi_addr_flags = ICM426XX_ADDR0_FLAGS,
- .default_range = 1000, /* dps */
- .rot_standard_ref = &base_standard_ref_icm,
- .min_frequency = ICM426XX_GYRO_MIN_FREQ,
- .max_frequency = ICM426XX_GYRO_MAX_FREQ,
-};
-
-struct motion_sensor_t motion_sensors[] = {
- [LID_ACCEL] = {
- .name = "Lid Accel",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_BMA255,
- .type = MOTIONSENSE_TYPE_ACCEL,
- .location = MOTIONSENSE_LOC_LID,
- .drv = &bma2x2_accel_drv,
- .mutex = &g_lid_mutex,
- .drv_data = &g_bma255_data,
- .port = I2C_PORT_ACCEL,
- .i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS,
- .rot_standard_ref = &lid_standard_ref,
- .min_frequency = BMA255_ACCEL_MIN_FREQ,
- .max_frequency = BMA255_ACCEL_MAX_FREQ,
- .default_range = 2, /* g, to support lid angle calculation. */
- .config = {
- /* EC use accel for angle detection */
- [SENSOR_CONFIG_EC_S0] = {
- .odr = 10000 | ROUND_UP_FLAG,
- },
- /* Sensor on in S3 */
- [SENSOR_CONFIG_EC_S3] = {
- .odr = 10000 | ROUND_UP_FLAG,
- },
- },
- },
-
- [BASE_ACCEL] = {
- .name = "Base Accel",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_BMI160,
- .type = MOTIONSENSE_TYPE_ACCEL,
- .location = MOTIONSENSE_LOC_BASE,
- .drv = &bmi160_drv,
- .mutex = &g_base_mutex,
- .drv_data = &g_bmi160_data,
- .port = I2C_PORT_ACCEL,
- .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
- .rot_standard_ref = &base_standard_ref,
- .min_frequency = BMI_ACCEL_MIN_FREQ,
- .max_frequency = BMI_ACCEL_MAX_FREQ,
- .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs */
- .config = {
- [SENSOR_CONFIG_EC_S0] = {
- .odr = 10000 | ROUND_UP_FLAG,
- },
- /* Sensor on in S3 */
- [SENSOR_CONFIG_EC_S3] = {
- .odr = 10000 | ROUND_UP_FLAG,
- },
- },
- },
-
- [BASE_GYRO] = {
- .name = "Base Gyro",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_BMI160,
- .type = MOTIONSENSE_TYPE_GYRO,
- .location = MOTIONSENSE_LOC_BASE,
- .drv = &bmi160_drv,
- .mutex = &g_base_mutex,
- .drv_data = &g_bmi160_data,
- .port = I2C_PORT_ACCEL,
- .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
- .default_range = 1000, /* dps */
- .rot_standard_ref = &base_standard_ref,
- .min_frequency = BMI_GYRO_MIN_FREQ,
- .max_frequency = BMI_GYRO_MAX_FREQ,
- },
-};
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-void motion_interrupt(enum gpio_signal signal)
-{
- if (base_accelgyro_config == BASE_GYRO_ICM426XX)
- icm426xx_interrupt(signal);
- else
- bmi160_interrupt(signal);
-}
-
-static void board_detect_motionsense(void)
-{
- int val;
-
- if (chipset_in_state(CHIPSET_STATE_ANY_OFF))
- return;
- if (base_accelgyro_config != BASE_GYRO_NONE)
- return;
-
- icm_read8(&icm426xx_base_accel, ICM426XX_REG_WHO_AM_I, &val);
- if (val == ICM426XX_CHIP_ICM40608) {
- motion_sensors[BASE_ACCEL] = icm426xx_base_accel;
- motion_sensors[BASE_GYRO] = icm426xx_base_gyro;
- base_accelgyro_config = BASE_GYRO_ICM426XX;
- ccprints("Base Accelgyro: ICM40608");
- } else {
- base_accelgyro_config = BASE_GYRO_BMI160;
- ccprints("Base Accelgyro: BMI160");
- }
-}
-DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_detect_motionsense,
- HOOK_PRIO_DEFAULT);
-DECLARE_HOOK(HOOK_INIT, board_detect_motionsense, HOOK_PRIO_INIT_I2C + 1);
-
-/******************************************************************************/
-/* Physical fans. These are logically separate from pwm_channels. */
-
-const struct fan_conf fan_conf_0 = {
- .flags = FAN_USE_RPM_MODE,
- .ch = MFT_CH_0, /* Use MFT id to control fan */
- .pgood_gpio = -1,
- .enable_gpio = GPIO_EN_PP5000_FAN,
-};
-
-/* Default */
-const struct fan_rpm fan_rpm_0 = {
- .rpm_min = 3100,
- .rpm_start = 3100,
- .rpm_max = 6900,
-};
-
-const struct fan_t fans[FAN_CH_COUNT] = {
- [FAN_CH_0] = { .conf = &fan_conf_0, .rpm = &fan_rpm_0, },
-};
-
-/******************************************************************************/
-/* MFT channels. These are logically separate from pwm_channels. */
-const struct mft_t mft_channels[] = {
- [MFT_CH_0] = {NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN},
-};
-BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT);
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
- [ADC_TEMP_SENSOR_1] = {
- "TEMP_CHARGER", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
- [ADC_TEMP_SENSOR_2] = {
- "TEMP_5V_REG", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
- [ADC_TEMP_SENSOR_3] = {
- "TEMP_AMB", NPCX_ADC_CH3, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
- [ADC_TEMP_SENSOR_4] = {
- "TEMP_CPU", NPCX_ADC_CH2, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-const struct temp_sensor_t temp_sensors[] = {
- [TEMP_SENSOR_1] = {.name = "Temp1",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = get_temp_3v3_30k9_47k_4050b,
- .idx = ADC_TEMP_SENSOR_1},
- [TEMP_SENSOR_2] = {.name = "Temp2",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = get_temp_3v3_30k9_47k_4050b,
- .idx = ADC_TEMP_SENSOR_2},
- [TEMP_SENSOR_3] = {.name = "Temp3",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = get_temp_3v3_30k9_47k_4050b,
- .idx = ADC_TEMP_SENSOR_3},
- [TEMP_SENSOR_4] = {.name = "Temp4",
- .type = TEMP_SENSOR_TYPE_BOARD,
- .read = get_temp_3v3_30k9_47k_4050b,
- .idx = ADC_TEMP_SENSOR_4},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-/* Helios temperature control thresholds */
-const static struct ec_thermal_config thermal_a = {
- .temp_host = {
- [EC_TEMP_THRESH_WARN] = 0,
- [EC_TEMP_THRESH_HIGH] = C_TO_K(65),
- [EC_TEMP_THRESH_HALT] = C_TO_K(90),
- },
- .temp_host_release = {
- [EC_TEMP_THRESH_WARN] = 0,
- [EC_TEMP_THRESH_HIGH] = C_TO_K(60),
- [EC_TEMP_THRESH_HALT] = 0,
- },
- .temp_fan_off = C_TO_K(65),
- .temp_fan_max = C_TO_K(80),
-};
-
-struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT];
-
-static void setup_fans(void)
-{
- thermal_params[TEMP_SENSOR_1] = thermal_a;
- thermal_params[TEMP_SENSOR_2] = thermal_a;
-}
-
-static void board_init(void)
-{
- /* Initialize Fans */
- setup_fans();
- /* Enable gpio interrupt for base accelgyro sensor */
- gpio_enable_interrupt(GPIO_BASE_SIXAXIS_INT_L);
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-void board_overcurrent_event(int port, int is_overcurrented)
-{
- /* Check that port number is valid. */
- if ((port < 0) || (port >= CONFIG_USB_PD_PORT_MAX_COUNT))
- return;
-
- /* Note that the level is inverted because the pin is active low. */
- gpio_set_level(GPIO_USB_C_OC_ODL, !is_overcurrented);
-}
-
-int board_tcpc_post_init(int port)
-{
- int rv = EC_SUCCESS;
-
- if (port == USB_PD_PORT_TCPC_0)
- /* Set MUX_DP_EQ to 3.6dB (0x98) */
- rv = tcpc_write(port, PS8XXX_REG_MUX_DP_EQ_CONFIGURATION, 0x98);
- else if (port == USB_PD_PORT_TCPC_1)
- rv = tcpc_write(port,
- PS8XXX_REG_MUX_USB_C2SS_HS_THRESHOLD, 0x80);
-
- return rv;
-}
-
-bool board_is_convertible(void)
-{
- const uint8_t sku = get_board_sku();
-
- return (sku == 255) || (sku == 1);
-}
View Lorry Controller Status