5 files changed, 0 insertions, 220 deletions
diff --git a/board/it8xxx2_evb/board.c b/board/it8xxx2_evb/board.c
deleted file mode 100644
index 0daa3d48cd..0000000000
--- a/board/it8xxx2_evb/board.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-/* IT8xxx2 development board configuration */
-
-#include "adc_chip.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-
-/*
- * PWM channels. Must be in the exactly same order as in enum pwm_channel.
- * There total three 16 bits clock prescaler registers for all pwm channels,
- * so use the same frequency and prescaler register setting is required if
- * number of pwm channel greater than three.
- */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_FAN] = {
-		.channel = PWM_HW_CH_DCR7,
-		.flags = 0,
-		.freq_hz = 30000,
-		.pcfsr_sel = PWM_PRESCALER_C4,
-	},
-	[PWM_CH_WITH_DSLEEP_FLAG] = {
-		.channel = PWM_HW_CH_DCR0,
-		.flags = PWM_CONFIG_DSLEEP,
-		.freq_hz = 100,
-		.pcfsr_sel = PWM_PRESCALER_C6,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/* ADC channels. Must be in the exactly same order as in enum adc_channel. */
-const struct adc_t adc_channels[] = {
-	/* Convert to mV (3000mV/1024). */
-	[ADC_VBUSSA] = {
-		.name = "ADC_VBUSSA",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH0, /* GPI0, ADC0 */
-	},
-	[ADC_VBUSSB] = {
-		.name = "ADC_VBUSSB",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH1, /* GPI1, ADC1 */
-	},
-	[ADC_EVB_CH_13] = {
-		.name = "ADC_EVB_CH_13",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH13, /* GPL1, ADC13 */
-	},
-	[ADC_EVB_CH_14] = {
-		.name = "ADC_EVB_CH_14",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH14, /* GPL2, ADC14 */
-	},
-	[ADC_EVB_CH_15] = {
-		.name = "ADC_EVB_CH_15",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH15, /* GPL3, ADC15 */
-	},
-	[ADC_EVB_CH_16] = {
-		.name = "ADC_EVB_CH_16",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH16, /* GPL0, ADC16 */
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
diff --git a/board/it8xxx2_evb/board.h b/board/it8xxx2_evb/board.h
deleted file mode 100644
index 1369e43496..0000000000
--- a/board/it8xxx2_evb/board.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* IT8xxx2 development board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* Select Baseboard features */
-#include "baseboard.h"
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-enum pwm_channel {
-	PWM_CH_FAN,
-	PWM_CH_WITH_DSLEEP_FLAG,
-	/* Number of PWM channels */
-	PWM_CH_COUNT
-};
-
-enum adc_channel {
-	ADC_VBUSSA,
-	ADC_VBUSSB,
-	ADC_EVB_CH_13,
-	ADC_EVB_CH_14,
-	ADC_EVB_CH_15,
-	ADC_EVB_CH_16,
-	/* Number of ADC channels */
-	ADC_CH_COUNT
-};
-
-#endif /* !__ASSEMBLER__ */
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/it8xxx2_evb/build.mk b/board/it8xxx2_evb/build.mk
deleted file mode 100644
index b54a2fcbb6..0000000000
--- a/board/it8xxx2_evb/build.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-# -*- makefile -*-
-# Copyright 2020 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-
-# the IC is ITE IT8xxx2
-CHIP:=it83xx
-CHIP_FAMILY:=it8xxx2
-CHIP_VARIANT:=it81202ax_1024
-BASEBOARD:=ite_evb
-
-board-y=board.o
diff --git a/board/it8xxx2_evb/ec.tasklist b/board/it8xxx2_evb/ec.tasklist
deleted file mode 100644
index ff184489e3..0000000000
--- a/board/it8xxx2_evb/ec.tasklist
+++ /dev/null
@@ -1,14 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/**
- * See CONFIG_TASK_LIST in config.h for details.
- */
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE)
diff --git a/board/it8xxx2_evb/gpio.inc b/board/it8xxx2_evb/gpio.inc
deleted file mode 100644
index 8a7f593ab6..0000000000
--- a/board/it8xxx2_evb/gpio.inc
+++ /dev/null
@@ -1,75 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first. */
-
-GPIO_INT(POWER_BUTTON_L, PIN(E, 4), GPIO_INT_BOTH | GPIO_PULL_UP,   power_button_interrupt)
-#ifndef CONFIG_HOSTCMD_ESPI
-GPIO_INT(PCH_PLTRST_L,   PIN(E, 3), GPIO_INT_BOTH | GPIO_PULL_UP,   lpcrst_interrupt)
-#endif
-GPIO_INT(LID_OPEN,       PIN(E, 2), GPIO_INT_BOTH | GPIO_PULL_UP,   lid_interrupt)
-GPIO_INT(WP_L,           PIN(I, 4), GPIO_INT_BOTH | GPIO_PULL_UP,   switch_interrupt)         /* Write protect input */
-#ifdef CONFIG_LOW_POWER_IDLE
-GPIO_INT(UART1_RX,       PIN(B, 0), GPIO_INT_FALLING | GPIO_PULL_UP, uart_deepsleep_interrupt) /* UART1 RX input */
-#endif
-
-GPIO(PCH_SMI_L,      PIN(D, 3), GPIO_OUT_HIGH)
-GPIO(PCH_SCI_L,      PIN(D, 4), GPIO_OUT_HIGH)
-GPIO(GATE_A20_H,     PIN(B, 5), GPIO_OUT_HIGH)
-GPIO(SYS_RESET_L,    PIN(B, 6), GPIO_OUT_HIGH)
-GPIO(LPC_CLKRUN_L,   PIN(H, 0), GPIO_OUT_LOW)
-GPIO(PCH_WAKE_L,     PIN(B, 7), GPIO_ODR_HIGH) /* Wake signal from EC to PCH */
-
-GPIO(I2C_A_SCL,      PIN(B, 3), GPIO_INPUT)
-GPIO(I2C_A_SDA,      PIN(B, 4), GPIO_INPUT)
-GPIO(I2C_B_SCL,      PIN(C, 1), GPIO_INPUT)
-GPIO(I2C_B_SDA,      PIN(C, 2), GPIO_INPUT)
-#ifdef CONFIG_IT83XX_SMCLK2_ON_GPC7
-GPIO(I2C_C_SCL,      PIN(C, 7), GPIO_INPUT)
-#else
-GPIO(I2C_C_SCL,      PIN(F, 6), GPIO_INPUT)
-#endif
-GPIO(I2C_C_SDA,      PIN(F, 7), GPIO_INPUT)
-
-GPIO(I2C_E_SCL,      PIN(E, 0), GPIO_INPUT)
-GPIO(I2C_E_SDA,      PIN(E, 7), GPIO_INPUT)
-
-#ifdef CONFIG_UART_HOST
-GPIO(UART2_SIN1,     PIN(H, 1), GPIO_INPUT)
-GPIO(UART2_SOUT1,    PIN(H, 2), GPIO_INPUT)
-#endif
-
-/* KSO/KSI pins can be used as GPIO input. */
-GPIO(BOARD_VERSION1, PIN(KSO_H, 5), GPIO_INPUT)
-GPIO(BOARD_VERSION2, PIN(KSO_H, 6), GPIO_INPUT)
-GPIO(BOARD_VERSION3, PIN(KSO_H, 7), GPIO_INPUT)
-
-/* Unimplemented signals which we need to emulate for now */
-UNIMPLEMENTED(ENTERING_RW)
-
-ALTERNATE(PIN_MASK(B, 0x03), 1, MODULE_UART, GPIO_PULL_UP) /* UART1 */
-#ifdef CONFIG_UART_HOST
-ALTERNATE(PIN_MASK(H, 0x06), 1, MODULE_UART, 0)            /* UART2 */
-#endif
-ALTERNATE(PIN_MASK(A, 0x40), 3, MODULE_SPI_CONTROLLER, 0)  /* SSCK of SPI */
-ALTERNATE(PIN_MASK(C, 0x28), 3, MODULE_SPI_CONTROLLER, 0)  /* SMOSI/SMISO of SPI */
-ALTERNATE(PIN_MASK(G, 0x01), 3, MODULE_SPI_CONTROLLER, 0)  /* SSCE1# of SPI */
-ALTERNATE(PIN_MASK(G, 0x04), 3, MODULE_SPI_CONTROLLER, 0)  /* SSCE0# of SPI */
-ALTERNATE(PIN_MASK(A, 0x80), 1, MODULE_PWM, 0)             /* PWM7 for FAN1 */
-ALTERNATE(PIN_MASK(D, 0x40), 3, MODULE_PWM, 0)             /* TACH0A for FAN1 */
-ALTERNATE(PIN_MASK(B, 0x18), 1, MODULE_I2C, 0)             /* I2C A SCL/SDA */
-#ifdef CONFIG_IT83XX_SMCLK2_ON_GPC7
-ALTERNATE(PIN_MASK(C, 0x86), 1, MODULE_I2C, 0)             /* I2C B SCL/SDA, C SCL */
-ALTERNATE(PIN_MASK(F, 0x80), 1, MODULE_I2C, 0)             /* I2C C SDA */
-#else
-ALTERNATE(PIN_MASK(C, 0x06), 1, MODULE_I2C, 0)             /* I2C B SCL/SDA */
-ALTERNATE(PIN_MASK(F, 0xC0), 1, MODULE_I2C, 0)             /* I2C C SCL/SDA */
-#endif
-ALTERNATE(PIN_MASK(E, 0x81), 1, MODULE_I2C, 0)             /* I2C E SCL/SDA E0/E7 */
-ALTERNATE(PIN_MASK(I, 0x03), 1, MODULE_ADC, 0)             /* ADC CH0, CH1 */
-ALTERNATE(PIN_MASK(L, 0x0F), 1, MODULE_ADC, 0)             /* ADC CH13-CH16 */