diff options
Diffstat (limited to 'board/it8xxx2_pdevb/board.h')
| -rw-r--r-- | board/it8xxx2_pdevb/board.h | 102 |
1 files changed, 0 insertions, 102 deletions
diff --git a/board/it8xxx2_pdevb/board.h b/board/it8xxx2_pdevb/board.h deleted file mode 100644 index 8646c6c7b3..0000000000 --- a/board/it8xxx2_pdevb/board.h +++ /dev/null @@ -1,102 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* IT8xxx2 PD development board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* Select Baseboard features */ -#include "baseboard.h" - -/* - * Enable PD in RO image for TCPMv2, otherwise there is only Type-c functions. - * NOTE: This configuration is only for development board and will never be - * released on a chrome os device. - */ -#define CONFIG_SYSTEM_UNLOCKED - -/* EC configurations, unnecessarily for PD */ -#undef CONFIG_FANS -#undef CONFIG_IT83XX_ENABLE_MOUSE_DEVICE -#undef CONFIG_IT83XX_SMCLK2_ON_GPC7 -#undef CONFIG_KEYBOARD_PROTOCOL_8042 -#undef CONFIG_PECI -#undef CONFIG_PECI_COMMON -#undef CONFIG_PECI_TJMAX -#undef CONFIG_POWER_BUTTON -#undef CONFIG_PWM -#undef CONFIG_SPI_CONTROLLER -#undef CONFIG_SPI_FLASH_PORT -#undef CONFIG_UART_HOST -#undef CONFIG_HOSTCMD_LPC -#undef CONFIG_CMD_MMAPINFO -#undef CONFIG_SWITCH - -/* PD */ -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_CHECK_MAX_REQUEST_ALLOWED -#define CONFIG_USB_PD_CUSTOM_PDO -#define CONFIG_USB_PD_3A_PORTS 0 -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT 2 -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_DRP_ACC_TRYSRC -#define CONFIG_USB_PD_REV30 -#define CONFIG_USB_PID 0x1234 /* Invalid PID for development board */ -#define CONFIG_USB_PD_DEBUG_LEVEL 2 -#define CONFIG_USB_PD_TCPM_ITE_ON_CHIP -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_GPIO -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_DECODE_SOP -#define CONFIG_VBOOT_HASH - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -enum pwm_channel { - /* Number of PWM channels */ - PWM_CH_COUNT -}; - -enum adc_channel { - ADC_VBUSSA, - ADC_VBUSSB, - ADC_VBUSSC, - ADC_EVB_CH_13, - ADC_EVB_CH_14, - ADC_EVB_CH_15, - /* Number of ADC channels */ - ADC_CH_COUNT -}; - -/* Define typical operating power and max power */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 60000 -#define PD_MAX_CURRENT_MA 3000 -/* Try to negotiate to 20V since i2c noise problems should be fixed. */ -#define PD_MAX_VOLTAGE_MV 20000 -/* TODO: determine the following board specific type-C power constants */ -/* - * delay to turn on the power supply max is ~16ms. - * delay to turn off the power supply max is about ~180ms. - */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* delay to turn on/off vconn */ - -void board_pd_vbus_ctrl(int port, int enabled); - -#endif /* !__ASSEMBLER__ */ -#endif /* __CROS_EC_BOARD_H */ |