1 files changed, 0 insertions, 174 deletions
diff --git a/board/jslrvp_ite/board.c b/board/jslrvp_ite/board.c
deleted file mode 100644
index eb654140a6..0000000000
--- a/board/jslrvp_ite/board.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Intel Jasperlake RVP with ITE EC board specific configuration */
-
-#include "anx7440.h"
-#include "button.h"
-#include "charger.h"
-#include "driver/charger/isl923x.h"
-#include "extpower.h"
-#include "i2c.h"
-#include "intc.h"
-#include "it83xx_pd.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power/icelake.h"
-#include "power_button.h"
-#include "switch.h"
-#include "system.h"
-#include "tablet_mode.h"
-#include "uart.h"
-#include "usb_mux.h"
-#include "usb_pd_tcpm.h"
-
-#include "gpio_list.h"
-
-#define CPRINTS(format, args...) cprints(CC_COMMAND, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_COMMAND, format, ## args)
-
-/* TCPC gpios */
-const struct tcpc_gpio_config_t tcpc_gpios[] = {
-	[TYPE_C_PORT_0] = {
-		.vbus = {
-			.pin = GPIO_USB_C0_VBUS_INT,
-			.pin_pol = 1,
-		},
-		.src = {
-			.pin = GPIO_USB_C0_SRC_EN,
-			.pin_pol = 1,
-		},
-		.snk = {
-			.pin = GPIO_USB_C0_SNK_EN_L,
-			.pin_pol = 0,
-		},
-	},
-	[TYPE_C_PORT_1] = {
-		.vbus = {
-			.pin = GPIO_USB_C1_VBUS_INT,
-			.pin_pol = 1,
-		},
-		.src = {
-			.pin = GPIO_USB_C1_SRC_EN,
-			.pin_pol = 1,
-		},
-		.snk = {
-			.pin = GPIO_USB_C1_SNK_EN_L,
-			.pin_pol = 0,
-		},
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(tcpc_gpios) == CONFIG_USB_PD_PORT_MAX_COUNT);
-
-/* USB-C TPCP Configuration */
-const struct tcpc_config_t tcpc_config[] = {
-	[TYPE_C_PORT_0] = {
-		.bus_type = EC_BUS_TYPE_EMBEDDED,
-		/* TCPC is embedded within EC so no i2c config needed */
-		.drv = &it83xx_tcpm_drv,
-	},
-	[TYPE_C_PORT_1] = {
-		.bus_type = EC_BUS_TYPE_EMBEDDED,
-		/* TCPC is embedded within EC so no i2c config needed */
-		.drv = &it83xx_tcpm_drv,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == CONFIG_USB_PD_PORT_MAX_COUNT);
-
-const struct usb_mux usb_muxes[] = {
-	[TYPE_C_PORT_0] = {
-		.usb_port = TYPE_C_PORT_0,
-		.i2c_port = I2C_PORT_USB_MUX,
-		.i2c_addr_flags = I2C_ADDR_USB_MUX0_FLAGS,
-		.driver = &anx7440_usb_mux_driver,
-	},
-	[TYPE_C_PORT_1] = {
-		.usb_port = TYPE_C_PORT_1,
-		.i2c_port = I2C_PORT_USB_MUX,
-		.i2c_addr_flags = I2C_ADDR_USB_MUX1_FLAGS,
-		.driver = &anx7440_usb_mux_driver,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == CONFIG_USB_PD_PORT_MAX_COUNT);
-
-/* I2C ports */
-const struct i2c_port_t i2c_ports[] = {
-	/* Flash EC */
-	[I2C_CHAN_FLASH] = {
-		.name = "chan-A",
-		.port = IT83XX_I2C_CH_A,
-		.kbps = 100,
-		.scl = GPIO_I2C_A_SCL,
-		.sda = GPIO_I2C_A_SDA,
-	},
-	/*
-	 * Port-80 Display, Charger, Battery, IO-expanders, EEPROM,
-	 * IMVP9, AUX-rail, power-monitor.
-	 */
-	[I2C_CHAN_BATT_CHG] = {
-		.name = "batt_chg",
-		.port = IT83XX_I2C_CH_B,
-		.kbps = 100,
-		.scl = GPIO_I2C_B_SCL,
-		.sda = GPIO_I2C_B_SDA,
-	},
-	/* Retimers, PDs */
-	[I2C_CHAN_RETIMER] = {
-		.name = "retimer",
-		.port = IT83XX_I2C_CH_E,
-		.kbps = 100,
-		.scl = GPIO_I2C_E_SCL,
-		.sda = GPIO_I2C_E_SDA,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(i2c_ports) == I2C_CHAN_COUNT);
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/* Charger Chips */
-const struct charger_config_t chg_chips[] = {
-	{
-		.i2c_port = I2C_PORT_CHARGER,
-		.i2c_addr_flags = ISL923X_ADDR_FLAGS,
-		.drv = &isl923x_drv,
-	},
-};
-
-/******************************************************************************/
-/* PWROK signal configuration */
-/*
- * On JSLRVP the ALL_SYS_PWRGD, VCCST_PWRGD, PCH_PWROK, and SYS_PWROK
- * signals are handled by the board. No EC control needed.
- */
-const struct intel_x86_pwrok_signal pwrok_signal_assert_list[] = {};
-const int pwrok_signal_assert_count = ARRAY_SIZE(pwrok_signal_assert_list);
-
-const struct intel_x86_pwrok_signal pwrok_signal_deassert_list[] = {};
-const int pwrok_signal_deassert_count = ARRAY_SIZE(pwrok_signal_assert_list);
-
-/*
- * Returns board information (board id[7:0] and Fab id[15:8]) on success
- * -1 on error.
- */
-int board_get_version(void)
-{
-	int fab_id;
-	int board_id;
-	int bom_id;
-
-	if (ioexpander_read_intelrvp_version(&fab_id, &board_id))
-		return -1;
-	/*
-	 * Port0: bit 1:0 - FAB ID(1:0) + 1
-	 * Port1: bit 7:5 - BOM ID(2:0)
-	 *        bit 4:0 - BOARD ID(4:0)
-	 */
-	fab_id = (fab_id & 0x03) + 1;
-	bom_id = ((board_id & 0xE0) >> 5);
-	board_id &= 0x1F;
-
-	CPRINTS("BID:0x%x, FID:0x%x, BOM:0x%x", board_id, fab_id, bom_id);
-
-	return board_id | (fab_id << 8);
-}