diff options
Diffstat (limited to 'board/kakadu/gpio.inc')
| -rw-r--r-- | board/kakadu/gpio.inc | 107 |
1 files changed, 0 insertions, 107 deletions
diff --git a/board/kakadu/gpio.inc b/board/kakadu/gpio.inc deleted file mode 100644 index f52f2b7f2f..0000000000 --- a/board/kakadu/gpio.inc +++ /dev/null @@ -1,107 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* - * Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. - */ - -/* Interrupts */ -GPIO_INT(USB_C0_PD_INT_ODL, PIN(B, 1), GPIO_INT_FALLING | GPIO_PULL_UP, - tcpc_alert_event) -GPIO_INT(VOLUME_UP_L, PIN(B, 10), GPIO_INT_BOTH | GPIO_PULL_UP, - button_interrupt) /* EC_VOLUP_BTN_ODL */ -GPIO_INT(VOLUME_DOWN_L, PIN(B, 11), GPIO_INT_BOTH | GPIO_PULL_UP, - button_interrupt) /* EC_VOLDN_BTN_ODL */ -GPIO_INT(POWER_BUTTON_L, PIN(A, 0), GPIO_INT_BOTH | GPIO_PULL_UP, - power_button_interrupt) /* EC_PWR_BTN_ODL */ - -GPIO_INT(AP_IN_SLEEP_L, PIN(C, 12), GPIO_INT_BOTH | GPIO_PULL_DOWN, - power_signal_interrupt) -GPIO_INT(PMIC_EC_RESETB, PIN(B, 7), GPIO_INT_BOTH | GPIO_PULL_DOWN, - power_signal_interrupt) -GPIO_INT(WARM_RESET_REQ, PIN(A, 3), GPIO_INT_RISING | GPIO_PULL_DOWN, - chipset_reset_request_interrupt) -GPIO_INT(AP_EC_WATCHDOG_L, PIN(C, 2), GPIO_INT_FALLING, - chipset_watchdog_interrupt) - -GPIO_INT_RW(ACCEL_INT_ODL, PIN(A, 4), GPIO_INT_FALLING | GPIO_SEL_1P8V | GPIO_PULL_UP, - motion_interrupt) -GPIO_INT(CHARGER_INT_ODL, PIN(C, 13), GPIO_INT_FALLING | GPIO_PULL_UP, - rt946x_interrupt) -GPIO_INT_RO(EMMC_CMD, PIN(B, 15), GPIO_INT_FALLING, - emmc_cmd_interrupt) -GPIO_INT(SPI1_NSS, PIN(A, 15), GPIO_INT_BOTH | GPIO_PULL_UP, - spi_event) -GPIO_INT_RW(SYNC_INT, PIN(A, 8), GPIO_INT_RISING | GPIO_PULL_DOWN, - sync_interrupt) -GPIO_INT(HALL_INT_L, PIN(C, 5), GPIO_INT_BOTH, - lid_interrupt) -GPIO_INT(GAUGE_INT_ODL, PIN(C, 9), GPIO_INT_FALLING | GPIO_PULL_UP, - gauge_interrupt) -GPIO_INT(POGO_ADC_INT_L, PIN(A, 6), GPIO_INT_BOTH, - pogo_adc_interrupt) - -/* unused */ -GPIO(POGO_VBUS_PRESENT, PIN(A, 14), GPIO_INPUT) -/* unused after board rev 5 */ -GPIO(USB_C0_DP_POLARITY, PIN(C, 14), GPIO_INPUT) -GPIO(USB_C0_DP_OE_L, PIN(A, 5), GPIO_INPUT) - - -/* Reset pins */ -GPIO(AP_SYS_RST_L, PIN(C, 11), GPIO_OUT_LOW) -GPIO(PMIC_WATCHDOG_L, PIN(C, 3), GPIO_OUT_LOW) -GPIO(PMIC_EN_ODL, PIN(C, 10), GPIO_ODR_HIGH) -GPIO(PMIC_FORCE_RESET_ODL, PIN(A, 2), GPIO_ODR_HIGH) -GPIO(MT6370_RST_L, PIN(F, 0), GPIO_OUT_LOW) - -/* - * I2C pins should be configured as inputs until I2C module is - * initialized. This will avoid driving the lines unintentionally. - */ -GPIO(I2C1_SCL, PIN(B, 8), GPIO_INPUT) -GPIO(I2C1_SDA, PIN(B, 9), GPIO_INPUT) -GPIO(I2C2_SCL, PIN(A, 11), GPIO_INPUT) -GPIO(I2C2_SDA, PIN(A, 12), GPIO_INPUT) - -/* Analog pins */ -GPIO(BATT_ID, PIN(A, 7), GPIO_ANALOG) -GPIO(BOARD_ID, PIN(C, 0), GPIO_ANALOG) -GPIO(EC_SKU_ID, PIN(B, 0), GPIO_ANALOG) - -/* Other input pins */ -GPIO(WP_L, PIN(C, 8), GPIO_INPUT) /* EC_FLASH_WP_ODL */ -GPIO(BOOT0, PIN(F, 11), GPIO_INPUT) -GPIO(CCD_MODE_ODL, PIN(A, 1), GPIO_INPUT) - -/* Other output pins */ -GPIO(ENTERING_RW, PIN(C, 6), GPIO_ODR_HIGH) /* EC_ENTERING_RW_ODL */ -GPIO(EC_INT_L, PIN(B, 12), GPIO_ODR_HIGH) /* EC_AP_INT_ODL */ -GPIO(EC_BOARD_ID_EN_L, PIN(C, 15), GPIO_ODR_HIGH) /* EC_BOARD_ID_EN_ODL */ -GPIO(USB_C0_HPD_OD, PIN(F, 1), GPIO_ODR_LOW) -GPIO(BOOTBLOCK_EN_L, PIN(C, 1), GPIO_ODR_HIGH) -GPIO(EN_PP3300_POGO, PIN(A, 13), GPIO_OUT_LOW) -GPIO(EN_POGO_CHARGE_L, PIN(B, 6), GPIO_OUT_HIGH) -GPIO(EN_USBC_CHARGE_L, PIN(C, 7), GPIO_OUT_LOW) -GPIO(EN_PP5000_USBC, PIN(D, 2), GPIO_OUT_LOW) -GPIO(BC12_DET_EN, PIN(C, 4), GPIO_OUT_LOW) - -/* USART1: PA9/PA10 */ -ALTERNATE(PIN_MASK(A, 0x0600), 1, MODULE_UART, 0) -/* I2C MASTER: PB8/9 */ -ALTERNATE(PIN_MASK(B, 0x0300), 1, MODULE_I2C, GPIO_ODR_HIGH ) -/* I2C MASTER: PA11/12 */ -ALTERNATE(PIN_MASK(A, 0x1800), 5, MODULE_I2C, GPIO_ODR_HIGH ) -/* SPI SLAVE: PB3/4/5 */ -ALTERNATE(PIN_MASK(B, 0x0038), 0, MODULE_SPI, 0) -#ifdef SECTION_IS_RO -/* SPI SLAVE: PB13/14/15 */ -ALTERNATE(PIN_MASK(B, 0xE000), 0, MODULE_SPI_FLASH, 0) -#endif -/* SPI SLAVE CS: PA15 */ -ALTERNATE(PIN_MASK(A, 0x8000), 0, MODULE_SPI, 0) |