diff options
Diffstat (limited to 'board/kano/board.h')
| -rw-r--r-- | board/kano/board.h | 138 |
1 files changed, 61 insertions, 77 deletions
diff --git a/board/kano/board.h b/board/kano/board.h index e3988aad3f..156df67af0 100644 --- a/board/kano/board.h +++ b/board/kano/board.h @@ -1,4 +1,4 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. +/* Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -25,7 +25,7 @@ #define CONFIG_LED_ONOFF_STATES /* Sensors */ -#define CONFIG_ACCELGYRO_ICM426XX /* Base accel */ +#define CONFIG_ACCELGYRO_ICM426XX /* Base accel */ #define CONFIG_ACCELGYRO_ICM_COMM_I2C #define CONFIG_ACCELGYRO_ICM426XX_INT_EVENT \ TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) @@ -46,12 +46,11 @@ /* Lid accel */ #define CONFIG_LID_ANGLE #define CONFIG_LID_ANGLE_UPDATE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL +#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL +#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL #define CONFIG_ACCEL_KX022 #define CONFIG_ACCEL_BMA4XX - /* Sensor console commands */ #define CONFIG_CMD_ACCELS #define CONFIG_CMD_ACCEL_INFO @@ -61,9 +60,8 @@ #define CONFIG_KEYBOARD_REFRESH_ROW3 #define CONFIG_KEYBOARD_FACTORY_TEST - /* USB Type A Features */ -#define USB_PORT_COUNT 1 +#define USB_PORT_COUNT 1 #define CONFIG_USB_PORT_POWER_DUMB /* USB Type C and USB PD defines */ @@ -77,17 +75,17 @@ #define CONFIG_USB_PD_TCPM_RT1715 /* TODO: b/177608416 - measure and check these values on brya */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 30000 /* us */ -#define PD_VCONN_SWAP_DELAY 5000 /* us */ +#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ +#define PD_POWER_SUPPLY_TURN_OFF_DELAY 30000 /* us */ +#define PD_VCONN_SWAP_DELAY 5000 /* us */ /* * Passive USB-C cables only support up to 60W. */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 60000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 +#define PD_OPERATING_POWER_MW 15000 +#define PD_MAX_POWER_MW 60000 +#define PD_MAX_CURRENT_MA 3000 +#define PD_MAX_VOLTAGE_MV 20000 /* * Macros for GPIO signals used in common code that don't match the @@ -95,70 +93,70 @@ * then redefined here to so it's more clear which signal is being used for * which purpose. */ -#define GPIO_AC_PRESENT GPIO_ACOK_OD -#define GPIO_CPU_PROCHOT GPIO_EC_PROCHOT_ODL -#define GPIO_EC_INT_L GPIO_EC_PCH_INT_ODL -#define GPIO_ENABLE_BACKLIGHT GPIO_EC_EN_EDP_BL -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV -#define GPIO_PACKET_MODE_EN GPIO_EC_GSC_PACKET_MODE -#define GPIO_PCH_PWRBTN_L GPIO_EC_PCH_PWR_BTN_ODL -#define GPIO_PCH_RSMRST_L GPIO_EC_PCH_RSMRST_L -#define GPIO_PCH_RTCRST GPIO_EC_PCH_RTCRST -#define GPIO_PCH_SLP_S0_L GPIO_SYS_SLP_S0IX_L -#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L -#define GPIO_TEMP_SENSOR_POWER GPIO_SEQ_EC_DSW_PWROK +#define GPIO_AC_PRESENT GPIO_ACOK_OD +#define GPIO_CPU_PROCHOT GPIO_EC_PROCHOT_ODL +#define GPIO_EC_INT_L GPIO_EC_PCH_INT_ODL +#define GPIO_ENABLE_BACKLIGHT GPIO_EC_EN_EDP_BL +#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW +#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV +#define GPIO_PACKET_MODE_EN GPIO_EC_GSC_PACKET_MODE +#define GPIO_PCH_PWRBTN_L GPIO_EC_PCH_PWR_BTN_ODL +#define GPIO_PCH_RSMRST_L GPIO_EC_PCH_RSMRST_L +#define GPIO_PCH_RTCRST GPIO_EC_PCH_RTCRST +#define GPIO_PCH_SLP_S0_L GPIO_SYS_SLP_S0IX_L +#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L +#define GPIO_TEMP_SENSOR_POWER GPIO_SEQ_EC_DSW_PWROK /* * GPIO_EC_PCH_INT_ODL is used for MKBP events as well as a PCH wakeup * signal. */ -#define GPIO_PCH_WAKE_L GPIO_EC_PCH_INT_ODL -#define GPIO_PG_EC_ALL_SYS_PWRGD GPIO_SEQ_EC_ALL_SYS_PG -#define GPIO_PG_EC_DSW_PWROK GPIO_SEQ_EC_DSW_PWROK -#define GPIO_PG_EC_RSMRST_ODL GPIO_SEQ_EC_RSMRST_ODL -#define GPIO_POWER_BUTTON_L GPIO_GSC_EC_PWR_BTN_ODL -#define GPIO_SYS_RESET_L GPIO_SYS_RST_ODL -#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL -#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL -#define GPIO_WP_L GPIO_EC_WP_ODL +#define GPIO_PCH_WAKE_L GPIO_EC_PCH_INT_ODL +#define GPIO_PG_EC_ALL_SYS_PWRGD GPIO_SEQ_EC_ALL_SYS_PG +#define GPIO_PG_EC_DSW_PWROK GPIO_SEQ_EC_DSW_PWROK +#define GPIO_PG_EC_RSMRST_ODL GPIO_SEQ_EC_RSMRST_ODL +#define GPIO_POWER_BUTTON_L GPIO_GSC_EC_PWR_BTN_ODL +#define GPIO_SYS_RESET_L GPIO_SYS_RST_ODL +#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL +#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL +#define GPIO_WP_L GPIO_EC_WP_ODL /* System has back-lit keyboard */ #define CONFIG_PWM_KBLIGHT /* I2C Bus Configuration */ -#define I2C_PORT_ACCEL NPCX_I2C_PORT0_0 +#define I2C_PORT_ACCEL NPCX_I2C_PORT0_0 -#define I2C_PORT_USB_C0_C2_TCPC NPCX_I2C_PORT1_0 -#define I2C_PORT_USB_C1_TCPC NPCX_I2C_PORT4_1 +#define I2C_PORT_USB_C0_C2_TCPC NPCX_I2C_PORT1_0 +#define I2C_PORT_USB_C1_TCPC NPCX_I2C_PORT4_1 -#define I2C_PORT_USB_C0_C2_PPC NPCX_I2C_PORT2_0 -#define I2C_PORT_USB_C1_PPC NPCX_I2C_PORT6_1 +#define I2C_PORT_USB_C0_C2_PPC NPCX_I2C_PORT2_0 +#define I2C_PORT_USB_C1_PPC NPCX_I2C_PORT6_1 -#define I2C_PORT_USB_C0_C2_BC12 NPCX_I2C_PORT2_0 -#define I2C_PORT_USB_C1_BC12 NPCX_I2C_PORT6_1 +#define I2C_PORT_USB_C0_C2_BC12 NPCX_I2C_PORT2_0 +#define I2C_PORT_USB_C1_BC12 NPCX_I2C_PORT6_1 -#define I2C_PORT_USB_C0_C2_MUX NPCX_I2C_PORT3_0 -#define I2C_PORT_USB_C1_MUX NPCX_I2C_PORT6_1 +#define I2C_PORT_USB_C0_C2_MUX NPCX_I2C_PORT3_0 +#define I2C_PORT_USB_C1_MUX NPCX_I2C_PORT6_1 -#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0 -#define I2C_PORT_CHARGER NPCX_I2C_PORT7_0 -#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 -#define I2C_PORT_MP2964 NPCX_I2C_PORT7_0 +#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0 +#define I2C_PORT_CHARGER NPCX_I2C_PORT7_0 +#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 +#define I2C_PORT_MP2964 NPCX_I2C_PORT7_0 -#define I2C_ADDR_EEPROM_FLAGS 0x50 +#define I2C_ADDR_EEPROM_FLAGS 0x50 -#define I2C_ADDR_MP2964_FLAGS 0x20 +#define I2C_ADDR_MP2964_FLAGS 0x20 /* * see b/174768555#comment22 */ -#define USBC_PORT_C0_BB_RETIMER_I2C_ADDR 0x54 +#define USBC_PORT_C0_BB_RETIMER_I2C_ADDR 0x54 /* SOC facing Burnside Bridge retimer */ -#define USBC_PORT_C1_SOC_BB_RETIMER_I2C_ADDR 0x55 +#define USBC_PORT_C1_SOC_BB_RETIMER_I2C_ADDR 0x55 /* Type-C connector facing Burnside Bridge retimer */ -#define USBC_PORT_C1_BB_RETIMER_I2C_ADDR 0x56 +#define USBC_PORT_C1_BB_RETIMER_I2C_ADDR 0x56 /* Enabling Thunderbolt-compatible mode */ #define CONFIG_USB_PD_TBT_COMPAT_MODE @@ -180,12 +178,12 @@ /* Charger defines */ #define CONFIG_CHARGER_ISL9241 #define CONFIG_CHARGE_RAMP_SW -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 +#define CONFIG_CHARGER_SENSE_RESISTOR 10 +#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 #ifndef __ASSEMBLER__ -#include "gpio_signal.h" /* needed by registers.h */ +#include "gpio_signal.h" /* needed by registers.h */ #include "registers.h" #include "usbc_config.h" @@ -203,33 +201,19 @@ enum temp_sensor_id { TEMP_SENSOR_COUNT }; -enum sensor_id { - LID_ACCEL = 0, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT -}; +enum sensor_id { LID_ACCEL = 0, BASE_ACCEL, BASE_GYRO, SENSOR_COUNT }; -enum battery_type { - BATTERY_AP19B8M, - BATTERY_TYPE_COUNT -}; +enum battery_type { BATTERY_AP19B8M, BATTERY_TYPE_COUNT }; enum pwm_channel { - PWM_CH_KBLIGHT = 0, /* PWM3 */ - PWM_CH_FAN, /* PWM5 */ + PWM_CH_KBLIGHT = 0, /* PWM3 */ + PWM_CH_FAN, /* PWM5 */ PWM_CH_COUNT }; -enum fan_channel { - FAN_CH_0 = 0, - FAN_CH_COUNT -}; +enum fan_channel { FAN_CH_0 = 0, FAN_CH_COUNT }; -enum mft_channel { - MFT_CH_0 = 0, - MFT_CH_COUNT -}; +enum mft_channel { MFT_CH_0 = 0, MFT_CH_COUNT }; void motion_interrupt(enum gpio_signal signal); |