diff options
Diffstat (limited to 'board/lalala/board.h')
| -rw-r--r-- | board/lalala/board.h | 182 |
1 files changed, 0 insertions, 182 deletions
diff --git a/board/lalala/board.h b/board/lalala/board.h deleted file mode 100644 index 1cbb6bf7e2..0000000000 --- a/board/lalala/board.h +++ /dev/null @@ -1,182 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Lalala board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -#define VARIANT_KEEBY_EC_NPCX797FC -#include "baseboard.h" - -/* - * The RAM and flash size combination on the the NPCX797FC does not leave - * any unused flash space that can be used to store the .init_rom section. - */ -#undef CONFIG_CHIP_INIT_ROM_REGION - -/* Battery */ -#define CONFIG_BATTERY_FUEL_GAUGE - -/* Charger */ -#define CONFIG_CHARGER_RAA489000 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_OCPC_DEF_RBATT_MOHMS 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr */ -#define CONFIG_OCPC -#undef CONFIG_CHARGER_SINGLE_CHIP -#undef CONFIG_CMD_CHARGER_DUMP -#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE -#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (100 * MSEC) - -/* GPIO for C1 interrupts, for baseboard use */ -#define GPIO_USB_C1_INT_ODL GPIO_SUB_USB_C1_INT_ODL - -/* Keyboard */ - -#define CONFIG_KEYBOARD_KEYPAD -#define CONFIG_PWM_KBLIGHT - -/* LED defines */ -#define CONFIG_LED_ONOFF_STATES - -/* PWM */ -#define CONFIG_PWM -#define NPCX7_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */ - -/* Temp sensor */ -#define CONFIG_TEMP_SENSOR -#define CONFIG_THROTTLE_AP -#define CONFIG_THERMISTOR_NCP15WB -#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B - -/* USB */ -#define CONFIG_BC12_DETECT_PI3USB9201 -#define CONFIG_USBC_RETIMER_PS8802 - -/* Common USB-A defines */ -#define USB_PORT_COUNT 2 -#define CONFIG_USB_PORT_POWER_SMART -#define CONFIG_USB_PORT_POWER_SMART_CDP_SDP_ONLY -#define CONFIG_USB_PORT_POWER_SMART_DEFAULT_MODE USB_CHARGE_MODE_CDP -#define CONFIG_USB_PORT_POWER_SMART_INVERTED -#define GPIO_USB1_ILIM_SEL GPIO_USB_A0_CHARGE_EN_L -#define GPIO_USB2_ILIM_SEL GPIO_USB_A1_CHARGE_EN_L - -/******************************************************************************/ - -/* USB PD */ -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_TCPM_RAA489000 - -/* USB defines specific to external TCPCs */ -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_VBUS_DETECT_TCPC -#define CONFIG_USB_PD_DISCHARGE_TCPC -#define CONFIG_USB_PD_TCPC_LOW_POWER - -/* Variant references the TCPCs to determine Vbus sourcing */ -#define CONFIG_USB_PD_5V_EN_CUSTOM - -/* I2C configuration */ -#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 -#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0 -#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0 -#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0 -#define I2C_PORT_SUB_USB_C1 NPCX_I2C_PORT2_0 -#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 -/* TODO(b:147440290): Need to handle multiple charger ICs */ -#define I2C_PORT_CHARGER I2C_PORT_USB_C0 - -#define I2C_PORT_ACCEL I2C_PORT_SENSOR - -#define I2C_ADDR_EEPROM_FLAGS 0x50 /* 7b address */ - -/* Sensors */ -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO -#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT - -#define CONFIG_ACCEL_BMA255 /* Lid accel */ -#define CONFIG_ACCELGYRO_BMI160 /* Base accel */ -#define CONFIG_ACCEL_KX022 /* Lid accel */ -#define CONFIG_ACCELGYRO_ICM426XX /* Base accel second source*/ - -/* Lid operates in forced mode, base in FIFO */ -#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) -#define CONFIG_ACCEL_FIFO -#define CONFIG_ACCEL_FIFO_SIZE 256 /* Must be a power of 2 */ -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) - -#define CONFIG_ACCEL_INTERRUPTS -#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) - -#define CONFIG_ACCELGYRO_ICM426XX_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) - -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_UPDATE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL - -#define CONFIG_TABLET_MODE -#define CONFIG_TABLET_MODE_SWITCH -#define CONFIG_GMR_TABLET_MODE - -/* Volume Button feature */ -#define CONFIG_ADC_BUTTONS -#define CONFIG_VOLUME_BUTTONS -#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL -#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -enum chg_id { - CHARGER_PRIMARY, - CHARGER_SECONDARY, - CHARGER_NUM, -}; - -enum adc_channel { - ADC_TEMP_SENSOR_1, /* ADC0 */ - ADC_TEMP_SENSOR_2, /* ADC1 */ - ADC_SUB_ANALOG, /* ADC2 */ - ADC_VSNS_PP3300_A, /* ADC9 */ - ADC_CH_COUNT -}; - -enum temp_sensor_id { - TEMP_SENSOR_1, - TEMP_SENSOR_2, - TEMP_SENSOR_COUNT -}; - -enum sensor_id { - LID_ACCEL, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT -}; - -enum pwm_channel { - PWM_CH_KBLIGHT, - PWM_CH_COUNT, -}; - -enum battery_type { - BATTERY_AP19B8M, - BATTERY_LGC_AP18C8K, - BATTERY_MURATA_AP18C4K, - BATTERY_TYPE_COUNT, -}; - -int board_is_sourcing_vbus(int port); -void motion_interrupt(enum gpio_signal signal); -#endif /* !__ASSEMBLER__ */ -#endif /* __CROS_EC_BOARD_H */ |