diff options
Diffstat (limited to 'board/liara/gpio.inc')
| -rw-r--r-- | board/liara/gpio.inc | 118 |
1 files changed, 0 insertions, 118 deletions
diff --git a/board/liara/gpio.inc b/board/liara/gpio.inc deleted file mode 100644 index 343c50f503..0000000000 --- a/board/liara/gpio.inc +++ /dev/null @@ -1,118 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. */ - -GPIO_INT(USB_C0_PD_INT_ODL, PIN(A, 0), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C1_PD_INT_ODL, PIN(F, 5), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C0_SWCTL_INT_ODL, PIN(0, 3), GPIO_INT_FALLING, ppc_interrupt) -GPIO_INT(USB_C1_SWCTL_INT_ODL, PIN(D, 4), GPIO_INT_FALLING, ppc_interrupt) -GPIO_INT(PCH_SLP_S3_L, PIN(A, 6), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(PCH_SLP_S5_L, PIN(A, 3), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(S0_PGOOD, PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(S5_PGOOD, PIN(6, 3), GPIO_INT_BOTH | GPIO_PULL_UP, power_signal_interrupt) -GPIO_INT(POWER_BUTTON_L, PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt) -GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH | GPIO_PULL_UP, lid_interrupt) -GPIO_INT(AC_PRESENT, PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt) -GPIO_INT(WP_L, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt) -GPIO_INT(VOLUME_DOWN_L, PIN(7, 0), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(VOLUME_UP_L, PIN(7, 5), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(USB_C0_CABLE_DET, PIN(3, 7), GPIO_INT_RISING, anx74xx_cable_det_interrupt) - -/* GPIO_INT_BOTH is required for PSL wake from hibernate, but we don't need an interrupt handler. */ -GPIO(EC_RST_ODL, PIN(0, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH | GPIO_LOCKED) - -GPIO(EN_PWR_A, PIN(E, 2), GPIO_OUT_LOW) /* Enable Power */ -GPIO(EN_PP1800_SENSOR, PIN(6, 7), GPIO_OUT_LOW) /* Enable Power */ -GPIO(ENABLE_BACKLIGHT_L, PIN(D, 3), GPIO_OUT_HIGH) /* Enable Backlight */ -GPIO(PCH_RSMRST_L, PIN(C, 2), GPIO_OUT_LOW) /* RSMRST# to SOC */ -GPIO(PCH_PWRBTN_L, PIN(C, 1), GPIO_OUT_HIGH) /* Power Button to SOC */ -GPIO(PCH_WAKE_L, PIN(7, 4), GPIO_OUT_HIGH) /* Wake SOC */ -GPIO(SYS_RESET_L, PIN(E, 4), GPIO_ODR_HIGH) /* Cold Reset to SOC */ -GPIO(CCD_MODE_ODL, PIN(E, 3), GPIO_INPUT) /* Case Closed Debug Mode */ -GPIO(ENTERING_RW, PIN(E, 1), GPIO_OUT_LOW) /* EC Entering RW */ -GPIO(EC_BATT_PRES_L, PIN(E, 5), GPIO_INPUT | GPIO_PULL_UP) /* Battery Present */ -GPIO(PCH_SYS_PWROK, PIN(D, 6), GPIO_OUT_LOW) /* Power OK to SOC */ -GPIO(CPU_PROCHOT, PIN(3, 4), GPIO_INPUT | GPIO_SEL_1P8V) /* PROCHOT to SOC */ -GPIO(APU_ALERT_L, PIN(A, 2), GPIO_INPUT) /* Alert to SOC */ -GPIO(3AXIS_INT_L, PIN(5, 0), GPIO_INPUT | GPIO_SEL_1P8V) /* 3 Axis Accel */ -GPIO(KB_BL_EN, PIN(F, 2), GPIO_OUT_LOW) /* Enable KB Backlight */ - -/* I2C pins - these will be reconfigured for alternate function below */ -GPIO(I2C0_SCL, PIN(B, 5), GPIO_INPUT) /* EC_I2C_POWER_SCL */ -GPIO(I2C0_SDA, PIN(B, 4), GPIO_INPUT) /* EC_I2C_POWER_SDA */ -GPIO(I2C1_SCL, PIN(9, 0), GPIO_INPUT) /* EC_I2C_USB_C0_PD_SCL */ -GPIO(I2C1_SDA, PIN(8, 7), GPIO_INPUT) /* EC_I2C_USB_C0_PD_SDA */ -GPIO(I2C2_SCL, PIN(9, 2), GPIO_INPUT) /* EC_I2C_USB_C1_PD_SCL */ -GPIO(I2C2_SDA, PIN(9, 1), GPIO_INPUT) /* EC_I2C_USB_C1_PD_SDA */ -GPIO(I2C3_SCL, PIN(D, 1), GPIO_INPUT | GPIO_SEL_1P8V) /* APU_SIC */ -GPIO(I2C3_SDA, PIN(D, 0), GPIO_INPUT | GPIO_SEL_1P8V) /* APU_SID */ -GPIO(I2C5_SCL, PIN(3, 3), GPIO_INPUT) /* EC_I2C_EEPROM_SCL and - EC_I2C_KB_BL_SCL */ -GPIO(I2C5_SDA, PIN(3, 6), GPIO_INPUT) /* EC_I2C_EEPROM_SDA and - EC_I2C_KB_BL_SDA */ -GPIO(I2C7_SCL, PIN(B, 3), GPIO_INPUT | GPIO_SEL_1P8V) /* EC_I2C_SENSOR_SCL */ -GPIO(I2C7_SDA, PIN(B, 2), GPIO_INPUT | GPIO_SEL_1P8V) /* EC_I2C_SENSOR_SDA */ - -/* - * The NPCX LPC driver configures and controls SCI and SMI, - * so PCH_SCI_ODL [PIN(7, 6)] and PCH_SMI_ODL [PIN(C, 6)] are - * not defined here as GPIOs. - */ -GPIO(PCH_SLP_S0_L, PIN(A, 4), GPIO_INPUT) - -GPIO(EN_USB_A0_5V, PIN(6, 1), GPIO_OUT_LOW) /* Enable A0 5V Charging */ -GPIO(EN_USB_A1_5V, PIN(C, 0), GPIO_OUT_LOW) /* Enable A1 5V Charging */ -GPIO(EN_USB_C0_TCPC_PWR, PIN(6, 0), GPIO_OUT_LOW) /* Enable C0 TCPC Power */ -GPIO(USB_C0_OC_L, PIN(7, 3), GPIO_OUT_HIGH) /* C0 Over Current */ -GPIO(USB_C1_OC_L, PIN(7, 2), GPIO_OUT_HIGH) /* C1 Over Current */ -GPIO(USB_C0_PD_RST_L, PIN(3, 2), GPIO_OUT_HIGH) /* C0 PD Reset */ -GPIO(USB_C1_PD_RST_L, PIN(D, 5), GPIO_OUT_HIGH) /* C1 PD Reset */ -GPIO(USB_C0_BC12_VBUS_ON_L, PIN(4, 0), GPIO_ODR_HIGH) /* C0 BC1.2 Power */ -GPIO(USB_C1_BC12_VBUS_ON_L, PIN(B, 1), GPIO_ODR_HIGH| GPIO_PULL_UP) /* C1 BC1.2 Power */ -GPIO(USB_C0_BC12_CHG_DET, PIN(6, 2), GPIO_INPUT) /* C0 BC1.2 Detect */ -GPIO(USB_C1_BC12_CHG_DET, PIN(8, 3), GPIO_INPUT | GPIO_PULL_DOWN) /* C1 BC1.2 Detect */ -GPIO(USB_C0_DP_HPD, PIN(9, 5), GPIO_OUT_LOW) /* C0 DP Hotplug Detect */ -GPIO(USB_C1_DP_HPD, PIN(9, 6), GPIO_OUT_LOW) /* C1 DP Hotplug Detect */ - -/* Board ID */ -GPIO(BOARD_VERSION1, PIN(C, 7), GPIO_INPUT) -GPIO(BOARD_VERSION2, PIN(9, 3), GPIO_INPUT) -GPIO(BOARD_VERSION3, PIN(8, 0), GPIO_INPUT) -GPIO(SKU_ID1, PIN(F, 0), GPIO_INPUT) -GPIO(SKU_ID2, PIN(4, 1), GPIO_INPUT) - -/* Alternate functions GPIO definitions */ -/* Cr50 requires no pull-ups on UART pins. */ -ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* UART from EC to Servo */ -ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, 0) /* I2C0 */ -ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0) /* I2C1 SCL / I2C2 */ -ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0) /* I2C1 SDA */ -ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0) /* I2C3 */ -ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0) /* I2C5 */ -ALTERNATE(PIN_MASK(B, 0x0C), 0, MODULE_I2C, 0) /* I2C7 */ -ALTERNATE(PIN_MASK(4, 0x30), 0, MODULE_ADC, 0) /* ADC0-1 */ -ALTERNATE(PIN_MASK(4, 0x02), 0, MODULE_ADC, 0) /* ADC4 */ -ALTERNATE(PIN_MASK(F, 0x02), 0, MODULE_ADC, 0) /* ADC8 */ -ALTERNATE(PIN_MASK(F, 0x01), 0, MODULE_ADC, 0) /* ADC9 */ -ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0) /* KB Backlight */ -ALTERNATE(PIN_MASK(C, 0x18), 0, MODULE_PWM, 0) /* LED 1 & 2 */ - -/* Keyboard Pins */ -ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) /* KSI_00-01 */ -ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) /* KSI_02-07 */ -ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_00-01 */ -GPIO(KBD_KSO2, PIN(1, 7), GPIO_OUT_LOW) /* KSO_02 inverted */ -ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_03-09 */ -ALTERNATE(PIN_MASK(0, 0xE0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_10-12 */ - -/* Power Switch Logic (PSL) inputs */ -ALTERNATE(PIN_MASK(0, 0x07), 0, MODULE_PMU, 0) /* GPIO00 = AC_PRESENT, - GPIO01 = POWER_BUTTON_L, - GPIO02 = EC_RST_ODL */ -ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, 0) /* GPIOD2 = LID_OPEN */ |