diff options
Diffstat (limited to 'board/lindar/board.c')
| -rw-r--r-- | board/lindar/board.c | 86 |
1 files changed, 44 insertions, 42 deletions
diff --git a/board/lindar/board.c b/board/lindar/board.c index 79ef3a4cbb..5bb155550e 100644 --- a/board/lindar/board.c +++ b/board/lindar/board.c @@ -1,4 +1,4 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. +/* Copyright 2020 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -41,8 +41,8 @@ #include "gpio_list.h" /* Must come after other header files. */ -#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_CHIPSET, format, ## args) +#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ##args) +#define CPRINTF(format, args...) cprintf(CC_CHIPSET, format, ##args) /* Keyboard scan setting */ __override struct keyboard_scan_config keyscan_config = { @@ -113,7 +113,7 @@ __override void lid_angle_peripheral_enable(int enable) { if (ec_cfg_has_tabletmode()) { if (chipset_in_state(CHIPSET_STATE_ANY_OFF) || - tablet_get_mode()) + tablet_get_mode()) enable = 0; keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE); } @@ -130,17 +130,13 @@ static struct stprivate_data g_lis2dh_data; static struct lsm6dsm_data lsm6dsm_data = LSM6DSM_DATA; /* Matrix to rotate lid and base sensor into standard reference frame */ -static const mat33_fp_t lid_standard_ref = { - { 0, FLOAT_TO_FP(1), 0}, - { FLOAT_TO_FP(1), 0, 0}, - { 0, 0, FLOAT_TO_FP(-1)} -}; +static const mat33_fp_t lid_standard_ref = { { 0, FLOAT_TO_FP(1), 0 }, + { FLOAT_TO_FP(1), 0, 0 }, + { 0, 0, FLOAT_TO_FP(-1) } }; -static const mat33_fp_t base_standard_ref = { - { FLOAT_TO_FP(1), 0, 0}, - { 0, FLOAT_TO_FP(-1), 0}, - { 0, 0, FLOAT_TO_FP(-1)} -}; +static const mat33_fp_t base_standard_ref = { { FLOAT_TO_FP(1), 0, 0 }, + { 0, FLOAT_TO_FP(-1), 0 }, + { 0, 0, FLOAT_TO_FP(-1) } }; struct motion_sensor_t motion_sensors[] = { [LID_ACCEL] = { @@ -225,7 +221,7 @@ unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors); const struct fan_conf fan_conf_0 = { .flags = FAN_USE_RPM_MODE, - .ch = MFT_CH_0, /* Use MFT id to control fan */ + .ch = MFT_CH_0, /* Use MFT id to control fan */ .pgood_gpio = -1, .enable_gpio = GPIO_EN_PP5000_FAN, }; @@ -261,8 +257,8 @@ const struct fan_t fans[FAN_CH_COUNT] = { /* * TODO(b/202062363): Remove when clang is fixed. */ -#define THERMAL_CPU \ - { \ +#define THERMAL_CPU \ + { \ .temp_host = { \ [EC_TEMP_THRESH_HIGH] = C_TO_K(90), \ [EC_TEMP_THRESH_HALT] = C_TO_K(100), \ @@ -289,8 +285,8 @@ __maybe_unused static const struct ec_thermal_config thermal_cpu = THERMAL_CPU; /* * TODO(b/202062363): Remove when clang is fixed. */ -#define THERMAL_INDUCTOR \ - { \ +#define THERMAL_INDUCTOR \ + { \ .temp_host = { \ [EC_TEMP_THRESH_HIGH] = C_TO_K(90), \ [EC_TEMP_THRESH_HALT] = C_TO_K(100), \ @@ -425,8 +421,7 @@ static void ps8815_reset(void) int val; gpio_set_level(GPIO_USB_C1_RT_RST_ODL, 0); - msleep(GENERIC_MAX(PS8XXX_RESET_DELAY_MS, - PS8815_PWR_H_RST_H_DELAY_MS)); + msleep(GENERIC_MAX(PS8XXX_RESET_DELAY_MS, PS8815_PWR_H_RST_H_DELAY_MS)); gpio_set_level(GPIO_USB_C1_RT_RST_ODL, 1); msleep(PS8815_FW_INIT_DELAY_MS); @@ -437,16 +432,16 @@ static void ps8815_reset(void) CPRINTS("%s: patching ps8815 registers", __func__); - if (i2c_read8(I2C_PORT_USB_C1, - PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == EC_SUCCESS) + if (i2c_read8(I2C_PORT_USB_C1, PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == + EC_SUCCESS) CPRINTS("ps8815: reg 0x0f was %02x", val); - if (i2c_write8(I2C_PORT_USB_C1, - PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, 0x31) == EC_SUCCESS) + if (i2c_write8(I2C_PORT_USB_C1, PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, + 0x31) == EC_SUCCESS) CPRINTS("ps8815: reg 0x0f set to 0x31"); - if (i2c_read8(I2C_PORT_USB_C1, - PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == EC_SUCCESS) + if (i2c_read8(I2C_PORT_USB_C1, PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == + EC_SUCCESS) CPRINTS("ps8815: reg 0x0f now %02x", val); } @@ -454,7 +449,7 @@ void board_reset_pd_mcu(void) { ps8815_reset(); usb_mux_hpd_update(USBC_PORT_C1, USB_PD_MUX_HPD_LVL_DEASSERTED | - USB_PD_MUX_HPD_IRQ_DEASSERTED); + USB_PD_MUX_HPD_IRQ_DEASSERTED); } /******************************************************************************/ @@ -530,25 +525,32 @@ BUILD_ASSERT(CONFIG_USB_PD_PORT_MAX_COUNT == USBC_PORT_COUNT); /******************************************************************************/ /* USBC mux configuration - Tiger Lake includes internal mux */ -static const struct usb_mux usbc1_usb3_db_retimer = { - .usb_port = USBC_PORT_C1, - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, - .next_mux = NULL, +static const struct usb_mux_chain usbc1_usb3_db_retimer = { + .mux = + &(const struct usb_mux){ + .usb_port = USBC_PORT_C1, + .driver = &tcpci_tcpm_usb_mux_driver, + .hpd_update = &ps8xxx_tcpc_update_hpd_status, + }, + .next = NULL, }; -const struct usb_mux usb_muxes[] = { +const struct usb_mux_chain usb_muxes[] = { [USBC_PORT_C0] = { - .usb_port = USBC_PORT_C0, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, - .next_mux = NULL, + .mux = &(const struct usb_mux) { + .usb_port = USBC_PORT_C0, + .driver = &virtual_usb_mux_driver, + .hpd_update = &virtual_hpd_update, + }, + .next = NULL, }, [USBC_PORT_C1] = { - .usb_port = USBC_PORT_C1, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, - .next_mux = &usbc1_usb3_db_retimer, + .mux = &(const struct usb_mux) { + .usb_port = USBC_PORT_C1, + .driver = &virtual_usb_mux_driver, + .hpd_update = &virtual_hpd_update, + }, + .next = &usbc1_usb3_db_retimer, }, }; BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT); |