diff options
Diffstat (limited to 'board/madoo/board.h')
| -rw-r--r-- | board/madoo/board.h | 53 |
1 files changed, 23 insertions, 30 deletions
diff --git a/board/madoo/board.h b/board/madoo/board.h index 1a0e37ac90..82cfa30b0e 100644 --- a/board/madoo/board.h +++ b/board/madoo/board.h @@ -1,4 +1,4 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. +/* Copyright 2020 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -13,11 +13,14 @@ /* Charger */ #define CONFIG_CHARGER_RAA489000 +#define PD_MAX_VOLTAGE_MV 20000 #define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 #define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_OCPC_DEF_RBATT_MOHMS 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr */ +#define CONFIG_OCPC_DEF_RBATT_MOHMS \ + 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr \ + */ #define CONFIG_OCPC -#undef CONFIG_CHARGER_SINGLE_CHIP +#undef CONFIG_CHARGER_SINGLE_CHIP /* EC console commands */ #define CONFIG_CMD_TCPC_DUMP @@ -31,7 +34,7 @@ /* PWM */ #define CONFIG_PWM -#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ +#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ /* USB */ #define CONFIG_BC12_DETECT_PI3USB9201 @@ -58,16 +61,16 @@ #define CONFIG_USB_PD_5V_EN_CUSTOM /* I2C configuration */ -#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 -#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0 -#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0 -#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0 +#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 +#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0 +#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0 +#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0 #define I2C_PORT_SUB_USB_C1 NPCX_I2C_PORT2_0 -#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 +#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 /* TODO(b:147440290): Need to handle multiple charger ICs */ -#define I2C_PORT_CHARGER I2C_PORT_USB_C0 +#define I2C_PORT_CHARGER I2C_PORT_USB_C0 -#define I2C_PORT_ACCEL I2C_PORT_SENSOR +#define I2C_PORT_ACCEL I2C_PORT_SENSOR #define I2C_ADDR_EEPROM_FLAGS 0x50 /* 7b address */ @@ -75,16 +78,15 @@ #define CONFIG_CMD_ACCELS #define CONFIG_CMD_ACCEL_INFO -#define CONFIG_ACCEL_BMA255 /* Lid accel */ -#define CONFIG_ACCELGYRO_LSM6DSM /* Base accel */ +#define CONFIG_ACCEL_BMA255 /* Lid accel */ +#define CONFIG_ACCELGYRO_LSM6DSM /* Base accel */ /* Lid operates in forced mode, base in FIFO */ #define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) #define CONFIG_ACCEL_FIFO -#define CONFIG_ACCEL_FIFO_SIZE 256 /* Must be a power of 2 */ +#define CONFIG_ACCEL_FIFO_SIZE 256 /* Must be a power of 2 */ #define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) - #define CONFIG_LID_ANGLE #define CONFIG_LID_ANGLE_UPDATE #define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL @@ -119,25 +121,16 @@ enum chg_id { }; enum adc_channel { - ADC_TEMP_SENSOR_1, /* ADC0 */ - ADC_TEMP_SENSOR_2, /* ADC1 */ - ADC_SUB_ANALOG, /* ADC2 */ - ADC_VSNS_PP3300_A, /* ADC9 */ + ADC_TEMP_SENSOR_1, /* ADC0 */ + ADC_TEMP_SENSOR_2, /* ADC1 */ + ADC_SUB_ANALOG, /* ADC2 */ + ADC_VSNS_PP3300_A, /* ADC9 */ ADC_CH_COUNT }; -enum sensor_id { - LID_ACCEL, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT -}; +enum sensor_id { LID_ACCEL, BASE_ACCEL, BASE_GYRO, SENSOR_COUNT }; -enum temp_sensor_id { - TEMP_SENSOR_1, - TEMP_SENSOR_2, - TEMP_SENSOR_COUNT -}; +enum temp_sensor_id { TEMP_SENSOR_1, TEMP_SENSOR_2, TEMP_SENSOR_COUNT }; enum pwm_channel { PWM_CH_KBLIGHT, |