diff options
Diffstat (limited to 'board/madoo/board.h')
| -rw-r--r-- | board/madoo/board.h | 165 |
1 files changed, 0 insertions, 165 deletions
diff --git a/board/madoo/board.h b/board/madoo/board.h deleted file mode 100644 index 7528f256c0..0000000000 --- a/board/madoo/board.h +++ /dev/null @@ -1,165 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Madoo board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -#define VARIANT_DEDEDE_EC_NPCX796FC -#include "baseboard.h" - -/* Charger */ -#define CONFIG_CHARGER_RAA489000 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_OCPC_DEF_RBATT_MOHMS 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr */ -#define CONFIG_OCPC -#undef CONFIG_CHARGER_SINGLE_CHIP - -/* EC console commands */ -#define CONFIG_CMD_TCPC_DUMP -#define CONFIG_CMD_CHARGER_DUMP - -/* GPIO for C1 interrupts, for baseboard use */ -#define GPIO_USB_C1_INT_ODL GPIO_SUB_USB_C1_INT_ODL - -/* Keyboard */ -#define CONFIG_PWM_KBLIGHT - -/* PWM */ -#define CONFIG_PWM -#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ - -/* USB */ -#define CONFIG_BC12_DETECT_PI3USB9201 -#define CONFIG_USBC_RETIMER_NB7V904M - -/* LED */ -#define CONFIG_LED_COMMON -#define CONFIG_LED_ONOFF_STATES -#define CONFIG_LED_ONOFF_STATES_BAT_LOW 10 - -/* USB PD */ -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_TCPM_RAA489000 -#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE -#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (100 * MSEC) - -/* USB defines specific to external TCPCs */ -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_VBUS_DETECT_TCPC -#define CONFIG_USB_PD_DISCHARGE_TCPC -#define CONFIG_USB_PD_TCPC_LOW_POWER - -/* Variant references the TCPCs to determine Vbus sourcing */ -#define CONFIG_USB_PD_5V_EN_CUSTOM - -/* I2C configuration */ -#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 -#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0 -#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0 -#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0 -#define I2C_PORT_SUB_USB_C1 NPCX_I2C_PORT2_0 -#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 -/* TODO(b:147440290): Need to handle multiple charger ICs */ -#define I2C_PORT_CHARGER I2C_PORT_USB_C0 - -#define I2C_PORT_ACCEL I2C_PORT_SENSOR - -#define I2C_ADDR_EEPROM_FLAGS 0x50 /* 7b address */ - -/* Sensors */ -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO - -#define CONFIG_ACCEL_BMA255 /* Lid accel */ -#define CONFIG_ACCELGYRO_LSM6DSM /* Base accel */ - -/* Lid operates in forced mode, base in FIFO */ -#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) -#define CONFIG_ACCEL_FIFO -#define CONFIG_ACCEL_FIFO_SIZE 256 /* Must be a power of 2 */ -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) - -#define CONFIG_ACCEL_INTERRUPTS - -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_UPDATE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL - -#define CONFIG_TABLET_MODE -#define CONFIG_TABLET_MODE_SWITCH -#define CONFIG_GMR_TABLET_MODE - -#define CONFIG_ACCEL_LSM6DSM_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) - -#define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION" -#define CONFIG_BATTERY_FUEL_GAUGE - -#define CONFIG_USB_MUX_RUNTIME_CONFIG - -/* Thermistors */ -#define CONFIG_TEMP_SENSOR -#define CONFIG_THERMISTOR -#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -enum chg_id { - CHARGER_PRIMARY, - CHARGER_SECONDARY, - CHARGER_NUM, -}; - -enum adc_channel { - ADC_TEMP_SENSOR_1, /* ADC0 */ - ADC_TEMP_SENSOR_2, /* ADC1 */ - ADC_SUB_ANALOG, /* ADC2 */ - ADC_VSNS_PP3300_A, /* ADC9 */ - ADC_CH_COUNT -}; - -enum sensor_id { - LID_ACCEL, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT -}; - -enum temp_sensor_id { - TEMP_SENSOR_1, - TEMP_SENSOR_2, - TEMP_SENSOR_COUNT -}; - -enum pwm_channel { - PWM_CH_KBLIGHT, - PWM_CH_COUNT, -}; - -enum battery_type { - BATTERY_SIMPLO_HIGHPOWER, - BATTERY_SIMPLO_COS, - BATTERY_CosMX, - BATTERY_SAMSUNG_SDI, - BATTERY_DYNAPACK_COS, - BATTERY_DYNAPACK_ATL, - BATTERY_TYPE_COUNT, -}; - -/* Keyboard type */ -enum fw_config_keyboard_type { - COMMON_KB = 0, - CUST_UK2_KB = 1, -}; - -#endif /* !__ASSEMBLER__ */ -#endif /* __CROS_EC_BOARD_H */ |