diff options
Diffstat (limited to 'board/magolor/board.h')
| -rw-r--r-- | board/magolor/board.h | 62 |
1 files changed, 26 insertions, 36 deletions
diff --git a/board/magolor/board.h b/board/magolor/board.h index 40391d16c6..481856323f 100644 --- a/board/magolor/board.h +++ b/board/magolor/board.h @@ -1,4 +1,4 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. +/* Copyright 2020 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -34,11 +34,14 @@ /* Charger */ #define CONFIG_CHARGER_RAA489000 +#define PD_MAX_VOLTAGE_MV 20000 #define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 #define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_OCPC_DEF_RBATT_MOHMS 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr */ +#define CONFIG_OCPC_DEF_RBATT_MOHMS \ + 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr \ + */ #define CONFIG_OCPC -#undef CONFIG_CHARGER_SINGLE_CHIP +#undef CONFIG_CHARGER_SINGLE_CHIP #undef CONFIG_CMD_CHARGER_DUMP #undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE #define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (100 * MSEC) @@ -59,7 +62,7 @@ /* PWM */ #define CONFIG_PWM -#define NPCX7_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */ +#define NPCX7_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */ /* Temp sensor */ #define CONFIG_TEMP_SENSOR @@ -98,16 +101,16 @@ #define CONFIG_USB_PD_5V_EN_CUSTOM /* I2C configuration */ -#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 -#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0 -#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0 -#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0 +#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 +#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0 +#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0 +#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0 #define I2C_PORT_SUB_USB_C1 NPCX_I2C_PORT2_0 -#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 +#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 /* TODO(b:147440290): Need to handle multiple charger ICs */ -#define I2C_PORT_CHARGER I2C_PORT_USB_C0 +#define I2C_PORT_CHARGER I2C_PORT_USB_C0 -#define I2C_PORT_ACCEL I2C_PORT_SENSOR +#define I2C_PORT_ACCEL I2C_PORT_SENSOR #define I2C_ADDR_EEPROM_FLAGS 0x50 /* 7b address */ @@ -125,18 +128,18 @@ #define CONFIG_CMD_ACCEL_INFO #define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT -#define CONFIG_ACCEL_BMA255 /* Lid accel */ -#define CONFIG_ACCELGYRO_BMI160 /* Base accel */ +#define CONFIG_ACCEL_BMA255 /* Lid accel */ +#define CONFIG_ACCELGYRO_BMI160 /* Base accel */ #ifdef BOARD_MAGOLOR -#define CONFIG_ACCEL_KX022 /* Lid accel */ -#define CONFIG_ACCELGYRO_ICM426XX /* Base accel second source*/ +#define CONFIG_ACCEL_KX022 /* Lid accel */ +#define CONFIG_ACCELGYRO_ICM426XX /* Base accel second source*/ #endif /* Lid operates in forced mode, base in FIFO */ #define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) #define CONFIG_ACCEL_FIFO -#define CONFIG_ACCEL_FIFO_SIZE 256 /* Must be a power of 2 */ +#define CONFIG_ACCEL_FIFO_SIZE 256 /* Must be a power of 2 */ #define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) #define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ @@ -174,25 +177,16 @@ enum chg_id { }; enum adc_channel { - ADC_TEMP_SENSOR_1, /* ADC0 */ - ADC_TEMP_SENSOR_2, /* ADC1 */ - ADC_SUB_ANALOG, /* ADC2 */ - ADC_VSNS_PP3300_A, /* ADC9 */ + ADC_TEMP_SENSOR_1, /* ADC0 */ + ADC_TEMP_SENSOR_2, /* ADC1 */ + ADC_SUB_ANALOG, /* ADC2 */ + ADC_VSNS_PP3300_A, /* ADC9 */ ADC_CH_COUNT }; -enum temp_sensor_id { - TEMP_SENSOR_1, - TEMP_SENSOR_2, - TEMP_SENSOR_COUNT -}; +enum temp_sensor_id { TEMP_SENSOR_1, TEMP_SENSOR_2, TEMP_SENSOR_COUNT }; -enum sensor_id { - LID_ACCEL, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT -}; +enum sensor_id { LID_ACCEL, BASE_ACCEL, BASE_GYRO, SENSOR_COUNT }; enum pwm_channel { PWM_CH_KBLIGHT, @@ -208,11 +202,7 @@ enum battery_type { BATTERY_TYPE_COUNT, }; -enum usbc_port { - USBC_PORT_C0 = 0, - USBC_PORT_C1, - USBC_PORT_COUNT -}; +enum usbc_port { USBC_PORT_C0 = 0, USBC_PORT_C1, USBC_PORT_COUNT }; void motion_interrupt(enum gpio_signal signal); void pen_detect_interrupt(enum gpio_signal s); |