diff options
Diffstat (limited to 'board/metaknight/gpio.inc')
| -rw-r--r-- | board/metaknight/gpio.inc | 152 |
1 files changed, 0 insertions, 152 deletions
diff --git a/board/metaknight/gpio.inc b/board/metaknight/gpio.inc deleted file mode 100644 index dee2e2dadf..0000000000 --- a/board/metaknight/gpio.inc +++ /dev/null @@ -1,152 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* - * Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. - */ - -/* Power Interrupts */ -GPIO_INT(SLP_S0_L, PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(SLP_S3_L, PIN(A, 5), GPIO_INT_BOTH, baseboard_all_sys_pgood_interrupt) -GPIO_INT(SLP_S4_L, PIN(D, 4), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(SLP_SUS_L, PIN(D, 7), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(RSMRST_PWRGD_L, PIN(C, 6), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(VCCIN_AUX_VID1, PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(CPU_C10_GATE_L, PIN(6, 7), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(VCCIN_AUX_VID0, PIN(F, 4), GPIO_INT_BOTH | GPIO_SEL_1P8V, power_signal_interrupt) -GPIO_INT(PG_VCCIO_EXT_OD, PIN(B, 0), GPIO_INT_BOTH, baseboard_all_sys_pgood_interrupt) -GPIO_INT(PG_PP5000_U_OD, PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(PG_DRAM_OD, PIN(E, 4), GPIO_INT_BOTH, baseboard_all_sys_pgood_interrupt) -GPIO_INT(PG_PP1050_ST_OD, PIN(4, 2), GPIO_INT_BOTH, power_signal_interrupt) - -/* USB-C interrupts */ -GPIO_INT(USB_C0_INT_ODL, PIN(6, 2), GPIO_INT_FALLING | GPIO_PULL_UP, usb_c0_interrupt) - - -/* Button interrupts */ -GPIO_INT(H1_EC_PWR_BTN_ODL, PIN(0, 1), GPIO_INT_BOTH | GPIO_PULL_UP, power_button_interrupt) - -/* Other interrupts */ -GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH, lid_interrupt) -GPIO_INT(EC_WP_OD, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt) -GPIO_INT(BASE_SIXAXIS_INT_L, PIN(5, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, motion_interrupt) -GPIO_INT(LID_360_L, PIN(9, 5), GPIO_INT_BOTH, gmr_tablet_switch_isr) -GPIO_INT(PEN_DET_ODL, PIN(5, 0), GPIO_INT_BOTH, pen_input_interrupt) -GPIO_INT(HDMI_HPD_SUB_ODL, PIN(9, 1), GPIO_INT_BOTH, sub_hdmi_hpd_interrupt) /* HDMI_HPD */ - -/* I2C Ports */ -GPIO(EC_I2C_EEPROM_SCL, PIN(B, 3), GPIO_INPUT) -GPIO(EC_I2C_EEPROM_SDA, PIN(B, 2), GPIO_INPUT) -GPIO(EC_I2C_BATTERY_SCL, PIN(3, 3), GPIO_INPUT) -GPIO(EC_I2C_BATTERY_SDA, PIN(3, 6), GPIO_INPUT) -GPIO(EC_I2C_SENSOR_SCL, PIN(B, 5), GPIO_INPUT) -GPIO(EC_I2C_SENSOR_SDA, PIN(B, 4), GPIO_INPUT) -GPIO(EC_I2C_USB_C0_SCL, PIN(9, 0), GPIO_INPUT) -GPIO(EC_I2C_USB_C0_SDA, PIN(8, 7), GPIO_INPUT) - -/* Extra Sub-board I/O pins */ -GPIO(EC_SUB_IO_2, PIN(3, 4), GPIO_OUT_LOW) - -/* Misc Enables */ -GPIO(EN_VCCIO_EXT, PIN(6, 1), GPIO_OUT_LOW) -/* TODO(b:149775160) - Modify if needed if we ever use this signal. */ -GPIO(EN_VCCST, PIN(A, 7), GPIO_INPUT) -GPIO(EN_PP3300_PEN, PIN(6, 3), GPIO_OUT_LOW) -GPIO(EN_PP3300_A, PIN(0, 3), GPIO_OUT_LOW) -GPIO(EN_PP5000_U, PIN(A, 4), GPIO_OUT_LOW) -GPIO(EN_SLP_Z, PIN(8, 3), GPIO_OUT_LOW) -GPIO(EN_BL_OD, PIN(D, 3), GPIO_ODR_LOW) -GPIO(ECH1_PACKET_MODE, PIN(7, 5), GPIO_OUT_LOW) -GPIO(SUB_C1_INT_EN_RAILS_ODL, PIN(F, 5), GPIO_ODR_LOW)/* 5V power en */ - -/* LED */ -GPIO(LED_W_ODL, PIN(C, 3), GPIO_OUT_HIGH | GPIO_OPEN_DRAIN) /* LED White */ -GPIO(LED_Y_ODL, PIN(C, 4), GPIO_OUT_HIGH | GPIO_OPEN_DRAIN) /* LED Amber */ - -/* Power Sequencing */ -GPIO(EC_AP_PSYS, PIN(B, 7), GPIO_OUT_LOW) -GPIO(EC_AP_RSMRST_L, PIN(A, 6), GPIO_OUT_LOW) -GPIO(EC_AP_PWR_BTN_ODL, PIN(C, 1), GPIO_ODR_HIGH) -GPIO(EC_AP_RTCRST, PIN(7, 6), GPIO_OUT_LOW) -GPIO(EC_AP_WAKE_ODL, PIN(7, 4), GPIO_ODR_HIGH) -GPIO(EC_AP_DPWROK, PIN(A, 3), GPIO_OUT_LOW) -GPIO(EC_AP_PCH_PWROK_OD, PIN(9, 4), GPIO_ODR_LOW) -GPIO(EC_AP_VCCST_PWRGD_OD, PIN(B, 1), GPIO_ODR_LOW) -GPIO(EC_AP_SYS_PWROK, PIN(0, 2), GPIO_OUT_LOW) -GPIO(EC_AP_MKBP_INT_L, PIN(7, 0), GPIO_ODR_HIGH) -GPIO(EC_PROCHOT_ODL, PIN(F, 1), GPIO_ODR_HIGH | GPIO_SEL_1P8V) -GPIO(EC_ENTERING_RW, PIN(E, 3), GPIO_OUT_LOW) -GPIO(ALL_SYS_PWRGD, PIN(A, 0), GPIO_OUT_LOW) -GPIO(SYS_RST_ODL, PIN(C, 5), GPIO_ODR_HIGH) -GPIO(CCD_MODE_ODL, PIN(E, 5), GPIO_ODR_HIGH) - -/* USB pins */ -GPIO(USB_C0_RST_ODL, PIN(9, 7), GPIO_OUT_HIGH) /* currently unused */ -GPIO(EC_AP_USB_C1_HDMI_HPD, PIN(9, 6), GPIO_OUT_LOW) -GPIO(EC_AP_USB_C0_HPD, PIN(9, 3), GPIO_OUT_LOW) -GPIO(HDMI_SEL_L, PIN(7, 2), GPIO_OUT_HIGH) -GPIO(EC_BATTERY_PRES_ODL, PIN(E, 1), GPIO_INPUT) -GPIO(USB_A0_CHARGE_EN_L, PIN(3, 7), GPIO_OUT_HIGH) /* Enable A0 1.5A Charging */ -GPIO(USB_A1_CHARGE_EN_L, PIN(F, 3), GPIO_OUT_HIGH) /* Enable A1 1.5A Charging */ -GPIO(EN_USB_A0_VBUS, PIN(4, 1), GPIO_OUT_LOW) /* Enable A1 5V Charging */ -GPIO(EN_USB_A1_VBUS, PIN(F, 2), GPIO_OUT_LOW) /* Enable A1 5V Charging */ - -/* - * metaknight doesn't have these physical pins coming to the EC but uses other - * logic. - */ -UNIMPLEMENTED(AC_PRESENT) -UNIMPLEMENTED(PG_EC_DSW_PWROK) -UNIMPLEMENTED(PG_EC_ALL_SYS_PWRGD) -UNIMPLEMENTED(VOLDN_BTN_ODL) -UNIMPLEMENTED(VOLUP_BTN_ODL) - -/* Alternate Functions */ -/* ADC */ -ALTERNATE(PIN_MASK(F, BIT(0)), 0, MODULE_ADC, 0) /* ADC9 */ -ALTERNATE(PIN_MASK(4, 0x38), 0, MODULE_ADC, 0) /* ADC0-2 */ - -/* Keyboard */ -ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT | GPIO_PULL_UP) /* KSI0, KSI1 */ -ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT | GPIO_PULL_UP) /* KSI2-7 */ -ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO0, KSO1 */ -ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO3-9 */ -ALTERNATE(PIN_MASK(0, 0xF0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO10-13 */ -ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO14 */ -GPIO(EC_KSO_02_INV, PIN(1, 7), GPIO_OUT_LOW) /* KSO2 inverted */ - -/* PWM */ -ALTERNATE(PIN_MASK(8, BIT(0)), 0, MODULE_PWM, 0) /* PWM3 */ - -/* UART */ -ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* UART1 */ - -/* I2C */ -ALTERNATE(PIN_MASK(B, 0x3C), 0, MODULE_I2C, 0) /* I2C7,I2C0 */ -ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0) /* I2C5 */ -ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0) /* I2C2, I2C1 SCL */ -ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0) /* I2C1 SDA */ - -/* NC pins, enable internal pull-up to avoid floating state. */ -GPIO(GPIO00_NC, PIN(0, 0), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIO32_NC, PIN(3, 2), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIO35_NC, PIN(3, 5), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIO40_NC, PIN(4, 0), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIO57_NC, PIN(5, 7), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIO60_NC, PIN(6, 0), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIO73_NC, PIN(7, 3), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIO80_NC, PIN(8, 0), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIO81_NC, PIN(8, 1), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIO86_NC, PIN(8, 6), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIO92_NC, PIN(9, 2), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIOC0_NC, PIN(C, 0), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIOC2_NC, PIN(C, 2), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIOD0_NC, PIN(D, 0), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIOD1_NC, PIN(D, 1), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIOD6_NC, PIN(D, 6), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIOE0_NC, PIN(E, 0), GPIO_INPUT | GPIO_PULL_UP) |