diff options
Diffstat (limited to 'board/morphius/board.h')
| -rw-r--r-- | board/morphius/board.h | 86 |
1 files changed, 36 insertions, 50 deletions
diff --git a/board/morphius/board.h b/board/morphius/board.h index 180b1df9d0..39bce41a46 100644 --- a/board/morphius/board.h +++ b/board/morphius/board.h @@ -1,4 +1,4 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. +/* Copyright 2019 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -52,36 +52,35 @@ #define RPM_DEVIATION 1 /* GPIO mapping from board specific name to EC common name. */ -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_ODL -#define CONFIG_SCI_GPIO GPIO_EC_FCH_SCI_ODL -#define GPIO_AC_PRESENT GPIO_ACOK_OD -#define GPIO_CPU_PROCHOT GPIO_PROCHOT_ODL -#define GPIO_EC_INT_L GPIO_EC_AP_INT_ODL -#define GPIO_ENABLE_BACKLIGHT_L GPIO_EC_EDP_BL_DISABLE -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV -#define GPIO_PCH_PWRBTN_L GPIO_EC_FCH_PWR_BTN_L -#define GPIO_PCH_RSMRST_L GPIO_EC_FCH_RSMRST_L -#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L -#define GPIO_PCH_SLP_S5_L GPIO_SLP_S5_L -#define GPIO_PCH_SYS_PWROK GPIO_EC_FCH_PWROK -#define GPIO_PCH_WAKE_L GPIO_EC_FCH_WAKE_L -#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL -#define GPIO_S0_PGOOD GPIO_S0_PWROK_OD -#define GPIO_S5_PGOOD GPIO_EC_PWROK_OD -#define GPIO_SYS_RESET_L GPIO_EC_SYS_RST_L -#define GPIO_TEMP_SENSOR_POWER GPIO_EN_PWR_A -#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL -#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL -#define GPIO_WP_L GPIO_EC_WP_L -#define GPIO_PACKET_MODE_EN GPIO_EC_H1_PACKET_MODE +#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_ODL +#define CONFIG_SCI_GPIO GPIO_EC_FCH_SCI_ODL +#define GPIO_AC_PRESENT GPIO_ACOK_OD +#define GPIO_CPU_PROCHOT GPIO_PROCHOT_ODL +#define GPIO_EC_INT_L GPIO_EC_AP_INT_ODL +#define GPIO_ENABLE_BACKLIGHT_L GPIO_EC_EDP_BL_DISABLE +#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW +#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV +#define GPIO_PCH_PWRBTN_L GPIO_EC_FCH_PWR_BTN_L +#define GPIO_PCH_RSMRST_L GPIO_EC_FCH_RSMRST_L +#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L +#define GPIO_PCH_SLP_S5_L GPIO_SLP_S5_L +#define GPIO_PCH_SYS_PWROK GPIO_EC_FCH_PWROK +#define GPIO_PCH_WAKE_L GPIO_EC_FCH_WAKE_L +#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL +#define GPIO_S0_PGOOD GPIO_S0_PWROK_OD +#define GPIO_S5_PGOOD GPIO_EC_PWROK_OD +#define GPIO_SYS_RESET_L GPIO_EC_SYS_RST_L +#define GPIO_TEMP_SENSOR_POWER GPIO_EN_PWR_A +#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL +#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL +#define GPIO_WP_L GPIO_EC_WP_L +#define GPIO_PACKET_MODE_EN GPIO_EC_H1_PACKET_MODE /* I2C mapping from board specific function*/ -#define I2C_PORT_THERMAL I2C_PORT_AP_HDMI +#define I2C_PORT_THERMAL I2C_PORT_AP_HDMI #ifndef __ASSEMBLER__ - void ps2_pwr_en_interrupt(enum gpio_signal signal); enum adc_channel { @@ -118,11 +117,7 @@ enum temp_sensor_id { TEMP_SENSOR_COUNT }; -enum usba_port { - USBA_PORT_A0 = 0, - USBA_PORT_A1, - USBA_PORT_COUNT -}; +enum usba_port { USBA_PORT_A0 = 0, USBA_PORT_A1, USBA_PORT_COUNT }; /***************************************************************************** * CBI EC FW Configuration @@ -172,40 +167,32 @@ enum ec_cfg_usb_db_type { #include "cbi_ec_fw_config.h" -#define HAS_USBC1_RETIMER_PS8802 \ - (BIT(MORPHIUS_DB_T_OPT3_USBC_HDMI_MSTHUB)) +#define HAS_USBC1_RETIMER_PS8802 (BIT(MORPHIUS_DB_T_OPT3_USBC_HDMI_MSTHUB)) static inline bool ec_config_has_usbc1_retimer_ps8802(void) { - return !!(BIT(ec_config_get_usb_db()) & - HAS_USBC1_RETIMER_PS8802); + return !!(BIT(ec_config_get_usb_db()) & HAS_USBC1_RETIMER_PS8802); } -#define HAS_USBC1_RETIMER_PS8818 \ - (BIT(MORPHIUS_DB_T_OPT1_USBC_HDMI)) +#define HAS_USBC1_RETIMER_PS8818 (BIT(MORPHIUS_DB_T_OPT1_USBC_HDMI)) static inline bool ec_config_has_usbc1_retimer_ps8818(void) { - return !!(BIT(ec_config_get_usb_db()) & - HAS_USBC1_RETIMER_PS8818); + return !!(BIT(ec_config_get_usb_db()) & HAS_USBC1_RETIMER_PS8818); } -#define HAS_HDMI_RETIMER_PI3HDX1204 \ - (BIT(MORPHIUS_DB_T_OPT1_USBC_HDMI)) +#define HAS_HDMI_RETIMER_PI3HDX1204 (BIT(MORPHIUS_DB_T_OPT1_USBC_HDMI)) static inline bool ec_config_has_hdmi_retimer_pi3hdx1204(void) { - return !!(BIT(ec_config_get_usb_db()) & - HAS_HDMI_RETIMER_PI3HDX1204); + return !!(BIT(ec_config_get_usb_db()) & HAS_HDMI_RETIMER_PI3HDX1204); } -#define HAS_MST_HUB_RTD2141B \ - (BIT(MORPHIUS_DB_T_OPT3_USBC_HDMI_MSTHUB)) +#define HAS_MST_HUB_RTD2141B (BIT(MORPHIUS_DB_T_OPT3_USBC_HDMI_MSTHUB)) static inline bool ec_config_has_mst_hub_rtd2141b(void) { - return !!(BIT(ec_config_get_usb_db()) & - HAS_MST_HUB_RTD2141B); + return !!(BIT(ec_config_get_usb_db()) & HAS_MST_HUB_RTD2141B); } void motion_interrupt(enum gpio_signal signal); @@ -219,12 +206,11 @@ void motion_interrupt(enum gpio_signal signal); int board_usbc_port_to_hpd_gpio_or_ioex(int port); #define PORT_TO_HPD(port) board_usbc_port_to_hpd_gpio_or_ioex(port) -extern const struct usb_mux usbc0_pi3dpx1207_usb_retimer; -extern const struct usb_mux usbc1_ps8802; +extern const struct usb_mux_chain usbc0_pi3dpx1207_usb_retimer; extern const struct usb_mux usbc1_ps8818; +extern struct usb_mux usbc1_ps8802; extern struct usb_mux usbc1_amd_fp5_usb_mux; #endif /* !__ASSEMBLER__ */ - #endif /* __CROS_EC_BOARD_H */ |