diff options
Diffstat (limited to 'board/morphius/board.h')
| -rw-r--r-- | board/morphius/board.h | 223 |
1 files changed, 0 insertions, 223 deletions
diff --git a/board/morphius/board.h b/board/morphius/board.h deleted file mode 100644 index 603bcec69b..0000000000 --- a/board/morphius/board.h +++ /dev/null @@ -1,223 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Morphius board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -#define VARIANT_ZORK_TREMBYLE - -#include <stdbool.h> -#include "baseboard.h" - -#define CONFIG_USBC_RETIMER_PI3DPX1207 -#define CONFIG_8042_AUX -#define CONFIG_PS2 -#define CONFIG_CMD_PS2 -#define CONFIG_KEYBOARD_FACTORY_TEST -#define CONFIG_DEVICE_EVENT -#define CONFIG_ASSERT_CCD_MODE_ON_DTS_CONNECT - -#undef CONFIG_LED_ONOFF_STATES -#define CONFIG_BATTERY_LEVEL_NEAR_FULL 91 - -#undef ZORK_PS8818_RX_INPUT_TERM -#define ZORK_PS8818_RX_INPUT_TERM PS8818_RX_INPUT_TERM_85_OHM - -/* Motion sensing drivers */ -#define CONFIG_ACCELGYRO_ICM426XX -#define CONFIG_ACCELGYRO_ICM426XX_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) -#define CONFIG_ACCELGYRO_BMI160 -#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) -#define CONFIG_ACCEL_INTERRUPTS -#define CONFIG_ACCEL_KX022 -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO -#define CONFIG_CUSTOM_FAN_CONTROL -#define CONFIG_TABLET_MODE -#define CONFIG_TEMP_SENSOR -#define CONFIG_TEMP_SENSOR_TMP432 -#define CONFIG_TEMP_SENSOR_POWER_GPIO GPIO_EN_PWR_A -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_UPDATE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL -#define CONFIG_GMR_TABLET_MODE -#define CONFIG_GMR_TABLET_MODE_CUSTOM -#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE -#define RPM_DEVIATION 1 - -/* GPIO mapping from board specific name to EC common name. */ -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_ODL -#define CONFIG_SCI_GPIO GPIO_EC_FCH_SCI_ODL -#define GPIO_AC_PRESENT GPIO_ACOK_OD -#define GPIO_CPU_PROCHOT GPIO_PROCHOT_ODL -#define GPIO_EC_INT_L GPIO_EC_AP_INT_ODL -#define GPIO_ENABLE_BACKLIGHT_L GPIO_EC_EDP_BL_DISABLE -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV -#define GPIO_PCH_PWRBTN_L GPIO_EC_FCH_PWR_BTN_L -#define GPIO_PCH_RSMRST_L GPIO_EC_FCH_RSMRST_L -#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L -#define GPIO_PCH_SLP_S5_L GPIO_SLP_S5_L -#define GPIO_PCH_SYS_PWROK GPIO_EC_FCH_PWROK -#define GPIO_PCH_WAKE_L GPIO_EC_FCH_WAKE_L -#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL -#define GPIO_S0_PGOOD GPIO_S0_PWROK_OD -#define GPIO_S5_PGOOD GPIO_EC_PWROK_OD -#define GPIO_SYS_RESET_L GPIO_EC_SYS_RST_L -#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL -#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL -#define GPIO_WP_L GPIO_EC_WP_L -#define GPIO_PACKET_MODE_EN GPIO_EC_H1_PACKET_MODE - -/* I2C mapping from board specific function*/ -#define I2C_PORT_THERMAL I2C_PORT_AP_HDMI - -#ifndef __ASSEMBLER__ - - -void ps2_pwr_en_interrupt(enum gpio_signal signal); - -enum adc_channel { - ADC_TEMP_SENSOR_CHARGER, - ADC_TEMP_SENSOR_5V_REGULATOR, - ADC_CH_COUNT -}; - -enum battery_type { - BATTERY_SMP, - BATTERY_SUNWODA, - BATTERY_LGC, - BATTERY_TYPE_COUNT, -}; - -enum mft_channel { - MFT_CH_0 = 0, - /* Number of MFT channels */ - MFT_CH_COUNT, -}; - -enum pwm_channel { - PWM_CH_KBLIGHT = 0, - PWM_CH_FAN, - PWM_CH_POWER_LED, - PWM_CH_COUNT -}; - -enum temp_sensor_id { - TEMP_SENSOR_CHARGER = 0, - TEMP_SENSOR_5V_REGULATOR, - TEMP_SENSOR_CPU, - TEMP_SENSOR_SSD, - TEMP_SENSOR_COUNT -}; - -enum usba_port { - USBA_PORT_A0 = 0, - USBA_PORT_A1, - USBA_PORT_COUNT -}; - -/***************************************************************************** - * CBI EC FW Configuration - */ - -/** - * MORPHIUS_MB_USBAC - * USB-A0 Speed: 5 Gbps - * Retimer: none - * USB-C0 Speed: 5 Gbps - * Retimer: PI3DPX1207 - * TCPC: NCT3807 - * PPC: AOZ1380 - * IOEX: TCPC - */ -enum ec_cfg_usb_mb_type { - MORPHIUS_MB_USBAC = 0, -}; - -/** - * MORPHIUS_DB_T_OPT1_USBC_HDMI - * USB-A1 none - * USB-C1 Speed: 5 Gbps - * Retimer: PS8818 - * TCPC: NCT3807 - * PPC: NX20P3483 - * IOEX: TCPC - * HDMI Exists: yes - * Retimer: PI3HDX1204 - * MST Hub: none - * - * MORPHIUS_DB_T_OPT3_USBC_HDMI_MSTHUB - * USB-A1 none - * USB-C1 Speed: 5 Gbps - * Retimer: PS8802 - * TCPC: NCT3807 - * PPC: NX20P3483 - * IOEX: TCPC - * HDMI Exists: yes - * Retimer: none - * MST Hub: RTD2141B - */ -enum ec_cfg_usb_db_type { - MORPHIUS_DB_T_OPT1_USBC_HDMI = 0, - MORPHIUS_DB_T_OPT3_USBC_HDMI_MSTHUB = 1, -}; - -#include "cbi_ec_fw_config.h" - -#define HAS_USBC1_RETIMER_PS8802 \ - (BIT(MORPHIUS_DB_T_OPT3_USBC_HDMI_MSTHUB)) - -static inline bool ec_config_has_usbc1_retimer_ps8802(void) -{ - return !!(BIT(ec_config_get_usb_db()) & - HAS_USBC1_RETIMER_PS8802); -} - -#define HAS_USBC1_RETIMER_PS8818 \ - (BIT(MORPHIUS_DB_T_OPT1_USBC_HDMI)) - -static inline bool ec_config_has_usbc1_retimer_ps8818(void) -{ - return !!(BIT(ec_config_get_usb_db()) & - HAS_USBC1_RETIMER_PS8818); -} - -#define HAS_HDMI_RETIMER_PI3HDX1204 \ - (BIT(MORPHIUS_DB_T_OPT1_USBC_HDMI)) - -static inline bool ec_config_has_hdmi_retimer_pi3hdx1204(void) -{ - return !!(BIT(ec_config_get_usb_db()) & - HAS_HDMI_RETIMER_PI3HDX1204); -} - -#define HAS_MST_HUB_RTD2141B \ - (BIT(MORPHIUS_DB_T_OPT3_USBC_HDMI_MSTHUB)) - -static inline bool ec_config_has_mst_hub_rtd2141b(void) -{ - return !!(BIT(ec_config_get_usb_db()) & - HAS_MST_HUB_RTD2141B); -} - -void motion_interrupt(enum gpio_signal signal); -enum gpio_signal board_usbc_port_to_hpd_gpio(int port); -#define PORT_TO_HPD(port) board_usbc_port_to_hpd_gpio(port) - -extern const struct usb_mux usbc0_pi3dpx1207_usb_retimer; -extern const struct usb_mux usbc1_ps8802; -extern const struct usb_mux usbc1_ps8818; -extern struct usb_mux usbc1_amd_fp5_usb_mux; - -#endif /* !__ASSEMBLER__ */ - - -#endif /* __CROS_EC_BOARD_H */ |