diff options
Diffstat (limited to 'board/munna/board.h')
| -rw-r--r-- | board/munna/board.h | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/board/munna/board.h b/board/munna/board.h deleted file mode 100644 index baf68470e4..0000000000 --- a/board/munna/board.h +++ /dev/null @@ -1,190 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Configuration for Munna */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -#define VARIANT_KUKUI_JACUZZI -#define VARIANT_KUKUI_BATTERY_SMART -#define VARIANT_KUKUI_CHARGER_ISL9238 -#define VARIANT_KUKUI_EC_STM32L431 - -#ifndef SECTION_IS_RW -#define VARIANT_KUKUI_NO_SENSORS -#endif /* SECTION_IS_RW */ - -#include "baseboard.h" - -#undef CONFIG_CHIPSET_POWER_SEQ_VERSION -#define CONFIG_CHIPSET_POWER_SEQ_VERSION 1 -#undef CONFIG_SYSTEM_UNLOCKED - -/* PLL configuration. Freq = STM32_HSE_CLOCK or HSI (16MHz) * n/m/r */ -#undef STM32_PLLM -#undef STM32_PLLN -#undef STM32_PLLR -#define STM32_PLLM 1 -#ifdef STM32_HSE_CLOCK -#define STM32_PLLN 12 -#else -#define STM32_PLLN 10 -#endif -#define STM32_PLLR 2 - -#define STM32_USE_PLL - -#define CONFIG_BATTERY_HW_PRESENT_CUSTOM - -#define CONFIG_CHARGER_PSYS - -#define CONFIG_CHARGER_RUNTIME_CONFIG - -#define CONFIG_BC12_DETECT_PI3USB9201 - -#define CONFIG_EXTPOWER_GPIO -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 200 - -#define CONFIG_I2C_BITBANG -#undef I2C_BITBANG_PORT_COUNT -#define I2C_BITBANG_PORT_COUNT 1 -#undef CONFIG_I2C_NACK_RETRY_COUNT -#define CONFIG_I2C_NACK_RETRY_COUNT 10 -#define CONFIG_SMBUS_PEC - -#define CONFIG_USB_PD_TCPM_FUSB302 -#define CONFIG_USB_PD_DISCHARGE_GPIO -#define CONFIG_USB_PD_TCPC_LOW_POWER - -#define CONFIG_USB_MUX_IT5205 - -#define CONFIG_LED_ONOFF_STATES -#define CONFIG_LED_POWER_LED - -#undef CONFIG_WATCHDOG_PERIOD_MS -#define CONFIG_WATCHDOG_PERIOD_MS 4000 - - -/* Motion Sensors */ -#ifndef VARIANT_KUKUI_NO_SENSORS -#define CONFIG_ACCEL_LIS2DWL /* Lid accel */ -#define CONFIG_ACCELGYRO_BMI160 /* Base accel */ -#define CONFIG_ACCEL_INTERRUPTS -#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) -#define CONFIG_ALS -#define CONFIG_CMD_ACCEL_INFO - -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_UPDATE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL - -#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) - -#ifdef SECTION_IS_RW -#define CONFIG_IO_EXPANDER_IT8801_PWM -#define CONFIG_KEYBOARD_BACKLIGHT -#endif - -#endif /* VARIANT_KUKUI_NO_SENSORS */ - -/* I2C ports */ -#define I2C_PORT_BC12 0 -#define I2C_PORT_TCPC0 0 -#define I2C_PORT_USB_MUX 0 -#define I2C_PORT_CHARGER 2 -#define I2C_PORT_SENSORS 2 -#define IT8801_KEYBOARD_PWM_I2C_PORT 2 -#define I2C_PORT_VIRTUAL_BATTERY I2C_PORT_BATTERY -#define I2C_PORT_BATTERY 3 -#define I2C_PORT_TCPC0 0 - -#undef I2C_CONTROLLER_COUNT -#undef I2C_PORT_COUNT -#define I2C_CONTROLLER_COUNT 3 -#define I2C_PORT_COUNT 3 - -/* IT8801 I2C address */ -#define IT8801_KEYBOARD_PWM_I2C_ADDR_FLAGS IT8801_I2C_ADDR1 - -/* Enable Accel over SPI */ -#define CONFIG_SPI_ACCEL_PORT 0 /* The first SPI master port (SPI2) */ - -#define CONFIG_KEYBOARD_PROTOCOL_MKBP -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_GPIO -/* Define the MKBP events which are allowed to wakeup AP in S3. */ -#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ - (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON)) - -#undef CONFIG_GMR_TABLET_MODE -#undef GMR_TABLET_MODE_GPIO_L -#undef CONFIG_TABLET_MODE -#undef CONFIG_TABLET_MODE_SWITCH - -#ifndef __ASSEMBLER__ - -enum adc_channel { - /* Real ADC channels begin here */ - ADC_BOARD_ID = 0, - ADC_EC_SKU_ID, - ADC_CH_COUNT -}; - -/* power signal definitions */ -enum power_signal { - AP_IN_S3_L, - PMIC_PWR_GOOD, - - /* Number of signals */ - POWER_SIGNAL_COUNT, -}; - -/* Motion sensors */ -enum sensor_id { - LID_ACCEL = 0, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT, -}; - -enum charge_port { - CHARGE_PORT_USB_C, -}; - -enum battery_type { - BATTERY_LGC, - BATTERY_SUNWODA, - BATTERY_SMP, - BATTERY_TYPE_COUNT, -}; - -enum pwm_channel { - IT8801_PWM_CH_KBLIGHT = 0, -}; - -#include "gpio_signal.h" -#include "registers.h" - -#ifdef SECTION_IS_RO -/* Interrupt handler for emmc task */ -void emmc_cmd_interrupt(enum gpio_signal signal); -#endif - -void bc12_interrupt(enum gpio_signal signal); -void board_reset_pd_mcu(void); -int board_get_version(void); - -/* returns the i2c port number of charger/battery */ -int board_get_charger_i2c(void); -int board_get_battery_i2c(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |